Rev 2:2
373E
FORD MONDEO ESTATE Jan 2001- June 2007 (Exc ST)
Powder Coated Finish
e11*94/20*4259*00
Components Code
Quantity
CB
1
CS
1
LP
1
RP
1
Bolt Kit
Description
w1828
Code
Quantity
Description
Crossbar
WB
2
12mm Large Round Washers
Centre Strut
WA
6
10mm Large Round Washers
Left Plate
E
2
16x50 Bolts, Nuts & Grip Washers
Right Plate
C
1
12x90 Bolt, Nut & Grip Washer
B
4
12x35 Bolts, Nuts & Grip Washer & 2 Nuts
D
2
12x80 Bolts, Nuts & Grip Washers
A
6
10x140 Bolts, Nuts & Grip Washers
BU
6
93x16mm Bushes
1. Remove the bumper fixings and cut the bumper as shown in the diagram. Temporarily lower the exhaust and remove the heat shield for easier access. 2. Locate three pre-drilled holes in the side of each chassis rail. Offer up side plates LP and RP to the inside of each chassis rail. Insert bushes BU into the chassis with bolts A and washers WA and loosely secure plates LP and RP to the chassis rails. 3. Position crossbar CB up behind the bumper and loosely attach to side plates LP and RP using bolts B. (note: on vehicles with exhaust on right use bolt C and washers WB in place of bolt B and assemble as shown in diagram 4. Refit heat shield, exhaust and bumper fixings. Attach centre strut CS to crossbar CB using bolts D. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
373E
Powder Coated Finish
FORD MONDEO ESTATE Jan 2001- June 2007 (Exc ST)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com