Rev 2:2
VOLVO V70 (Curved Body) Mar 2000—Sep 2008 (Inc AWD)
375E
(Exc CLASSIC, CROSS COUNTRY)
Powder Coated Finish
e11*94/20*5412*00 Components
Code
Quantity
CB
1
Description Crossbar
Bolt Kit Code
Quantity
WA
6
12mm Small Round Washers
B
2
16x50 Set Screws, Nuts & Grip Washers
PR
3
Pop Rivets
A
6
12x40 set screws & Grip Washers
HS
1
Heat Shield Plate
w643
Description
1. Remove battery cover. Remove bumper (4 nuts behind foam on rear panel located by the perforations. Drill out 2 pop rivets and remove torx head screws. Pull out upper edge of bumper and slide back) 2. Remove towing eye from off side and exhaust bracket( 2 bolts and 1 pop rivet on heat shield ) 3. Attach cross bar CB to captive nuts in chassis with set screws A and washers WA using the front set screw A on near side to attach heat shield plate HS and pop rivet PR to secure the heat shield. 4. Cut bumper as indicated and refit using pop rivets PR on underside of bumper. 5. Attach type approved towball (not supplied) using set screws B. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
375E
Powder Coated Finish
VOLVO V70 (Curved Body) Mar 2000—Sep 2008 (Inc AWD) (Exc CLASSIC, CROSS COUNTRY)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com