Rev 2:0
399E
PEUGEOT 306 HATCH 1993-JULY 2001 (EXC CABRIOLET)
Powder Coated Finish
Components Code
Quantity
CB
1
RA
1
LA
1
CS
1
Bolt Kit
Description
Code
Quantity
Crossbar
WA
2
8mm Large Round Washers
Right Angle
NB
2
8mm Nuts & Grip Washers
Left angle
WB
2
10mm Large Round Washers
Centre Strut
CP
2
10x30 Bent Captive Bolts
D
2
16x50 Bolts, Nuts & Grip Washers
A
4
10x60 Bolts, Nuts & Grip Washers
C
2
12x70 Bolts, Nuts & Grip Washers
NA
2
10mm Nuts & Grip Washers
BU
2
25x19mm Bushes
SP
1
Spacer
w1057
Description
1. Remove the spare wheel and boot floor covering. 2. Locate and remove two plastic grommets, one on each side of the boot floor. Insert the captive plates CP into the chassis members and through the slotted holes in the chassis rails. Loosely attach angles LA & RA to the captive plates on the outside of the left and right chassis using nuts NA and washers WB. 3. Where the rearmost exhaust hanger bracket is fitted to the rear panel, it should be removed. Place the crossbar CB and hang it on the studs on the rear panel but do not secure it with nuts. Align the holes in crossbar CB with those in angles LA & RA. Insert bolts a through the crossbar, chassis & angles and loosely secure the crossbar CB and angles LA & RA and bushes BU on the bottom holes. 4. Attach crossbar CB to the rear panel using nuts NB with washers WA and re-attach exhaust hanger bracket (where fitted) with spacer SP. 5. Attach centre strut CS using bolts C. 6. Check and tighten all fasteners using a calibrated torque tool to the recommended torque setting on the towbar drawing and replace spare wheel and floor covering.
NOTE: ON MODELS BETWEEN 1993 AND 1997 THE BUMPER WILL REQUIRE CUTTING 60 x 55MM DEEP
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:0
399E
Powder Coated Finish
PEUGEOT 306 HATCH 1993 - JULY 2001 (EXC CABRIOLET)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com