Rev 2:1
427E
CITROEN XSARA PICASSO
Powder Coated Finish
e11*94/20*3486*00
Components Code
Quantity
CB
1
F
1
RA
1
LA
1
Bolt Kit
Description
w1120
Code
Quantity
Description
Crossbar
WB
2
10mm Small Round Washers
Flange Neck
WA
4
10mm Large Round Washers
Right Angle
E
2
16x40 Set Screws, Nuts & Grip Washers
Left Angle
A
2
10x100 Bolts, Nuts & Grip Washers
B
2
10x90 Bolts, Nuts & Grip Washers
D
2
12x70 Bolts, Nuts & Grip Washers
C
6
10x30 Set Screws, Grip Washers & 4 Nuts
BU
4
54x14mm Bushes
BC12
4
12mm Bolt Covers
1. Remove the spare wheel and lower the rear exhaust hanger. 2. Insert bushes BU into the chassis rails through holes in the outside faces of the chassis and loosely attach angles LA and RA to the chassis rails using bolts A and B with washers WA. 3. Loosely attach crossbar CB to the holes in the rear panel using set screws C with washers WB. 4. Attach crossbar CB to angles LA and RA using set screws C. 5. Attach flange neck F to crossbar CB using bolts D. 6. Attach type approved towball (not supplied) using set screws E. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 8. Remount spare wheel and exhaust.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
427E
Powder Coated Finish
CITROEN XSARA PICASSO
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com