Rev 2:9
497E
Powder Coated Finish
RENAULT MEGANE SCENIC (Inc 16V 2.0L Steel Wheel Well) (Exc RX4) 1997- Sep 2003 e11*94/20*1792*00
Components Code
Quantity
Description
CB
1
Crossbar
AV123
1
Towball cover
LS
1
RS AN
Bolt Kit Code
Quantity
w986
Description
D
2
8x30 Set Screws & Grip Washers
WA
2
10mm Large Round Washers
Left Strap
G
4
12mm Large Round Washers
1
Right Strap
J
2
10mm Small Round Washers
2
Angles
A
2
16x50 Set Screws, Nuts & Grip Washers
B
2
10x40 Set Screws, Nuts & Grip Washers
C
4
12x35 Set Screws, Nuts & Grip Washers
E
1
10x110 Bolts & Grip Washers
K
1
10x100 Bolt & Grip Washer
H
2
8mm Bayonet Nuts
L
2
8mm Cage Nuts
F
2
54x16mm Bushes
1. Remove the two rubber grommets or tape from behind the steel valance on back panel and insert the cage nuts or bayonet nuts H/L into the top holes only (DO NOT PUT CAGE NUTS OR BAYONET NUTS INTO THE BOTTOM HOLES). Loosely attach the angles AN to the cage nuts or bayonet nuts H/L using set screws D. 2. Insert bushes F into the pre drilled holes in the chassis rails and attach straps LS and RS to the corresponding chassis rails using bolts E and K using washers WA. 3. Offer up the crossbar CB and attach it to the bottom holes in the rear valance using set screws B sandwiching the steel valance between angles AN and crossbar CB. 4. Attach straps LS and RS to the crossbar CB using set screws C with washers G. 5. Attach approved towball (not supplied) to the crossbar CB using set screws A. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com