Rev 2:1
535E
VAUXHALL VECTRA ESTATE 2003–Dec 2008
Powder Coated Finish
Components Code
Quantity
CB
1
CS
1
RS
1
LS SP
Description
Bolt Kit Code
Quantity
Crossbar
A
2
16x50 Set Screws, Nuts & Grip Washers
Centre Strut
B
2
12x90 Bolts, Nuts & Grip Washers
Right Side Plate
C
2
12x40 Set Screws & Grip Washers
1
Left Side Plate
D
2
12x40 Set Screws, Nuts & Grip Washers
6
Spreader Plates
E
6
12x170 Bolts, Nuts & Grip Washers
BU
2
134x19mm Bushes
BS
4
120x19mm Bushes
w2343
Description
1. Remove the luggage restraints from corners of boot floor. Remove rear panel and loosen boot side trims. 2. Locate dimples on boot floor ( 3 each side) and drill out to accommodate bushes BU and BS 3. With bushes BU and BS in the chassis and spreader plates SP in position inside the boot attach side plates RS and LS using bolts E. 4. Attach crossbar CB to the side plates RS and LS using set screws C and D. 5. Attach centre strut CS to the crossbar CB using bolts B. 6. Attach type approved towball (not supplied) using set screws A. 7. Check and tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
535E
Powder Coated Finish
VAUXHALL VECTRA ESTATE
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com