Rev 2:1
557E
NISSAN X TRAIL NOVEMBER (T30) 2001-2007
Powder Coated Finish
e11*94/20*6537*00 Components
Code
Quantity
CB
1
LA
1
RA
1
LB RB
Bolt Kit
Description
Code
Quantity
Crossbar
WA
12
10mm Large Round Washers
Left Angle
WB
2
8mm Small Round Washers
Right Angle
D
2
8x30 Bolts & Grip Washers
1
Left Bracket
E
2
16x50 Bolts, Nuts & Grip Washers
1
Right Bracket
A
8
10x30 Bolts & Grip Washers
B
4
10x40 Bolts & Grip Washers
C
2
12x40 Bolts, Nuts & Grip Washers
w1040
Description
1. Remove bumper and plastic under shield. Release rear exhaust rubber and remove chassis end caps. 2. Insert left angle LA and right angle RA into the ends of the chassis and loosely attach using bolts A with washers WA. Insert crossbar CB into the ends of the chassis and loosely attach using bolts B and washers WA. 3. Loosely attach left and right brackets LB and RB to the crossbar CB and angles LA and RA using bolts C. Attach brackets LB and RB to the rear panel using bolts D and washers WB. 4. Attach type approved towball (not supplied) to the crossbar CB using bolts E. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 6. Cut bumper as shown in diagram detail and re fit.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com