Rev 2:3
566E
TOYOTA RAV 4 August 2000 — January 2006
Powder Coated Finish
e11*94/20*5054*00
Components Code
Quantity
CB
1
Crossbar
CS
1
LA
1
RA
1
Bolt Kit
Description
w923
Code
Quantity
Description
WA
4
12mm Large Round Washers
Centre Strut
D
2
16x50 Set Screws, Nuts & Grip Washers
Left Angle
A
4
12x1.25x35 Set Screws & Grip Washers
Right Angle
B
4
12x35 Set Screws, Grip Washers & 2 Nuts
C
2
12x80 Bolts, Nuts & Grip Washers
1. Remove towing eye from left hand side. 2. Loosely attach angles LA and RA to the threaded holes in the chassis rail using set screws A and washers WA. 3. Loosely attach crossbar CB to the angles LA and RA using set screws B. 4. Loosely attach centre strut CS to the crossbar CB using bolts C. (Note: There are two settings on the crossbar CB to allow 30mm ball height differences, this could also interfere with the rear doors). 5. Attach type approved towball (not supplied) to centre strut CS using set screws D. 6. Check and tighten all fasteners using a calibrated torque tool to the specified recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
566E
Powder Coated Finish
TOYOTA RAV 4 August 2000 — January 2006
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com