Rev 1:5
615E
AUDI A6 SALOON MAY ‘97—SUMMER ‘04 & AVANT ESTATE (INC. QUATTRO) MARCH ‘98—SUMMER ‘05
Including Stratum Powder Coated Finish
Components Code
Bolt Kit
Description
Quantity
Code
Quantity
WA
6
10mm Large Round Washers
2
16x50 Bolts, Nuts & Grip Washers
w1076
Description
CB
1
Crossbar
CS
1
Centre Strut
D
LA
1
Left Angle
B
4
12x35 Bolts, Nuts & Grip Washers
RA
1
Right Angle
A
4
10x00 Bolts, Nuts & Grip Washers
C
2
12x70 Bolts, Nuts & Grip Washers
1. Remove the boot floor covering, side lining luggage catches & rear panel. 2. Remove the bumper-15 fastenings and cut out in the centre of the lower edge a piece 60mm wide by 35mm deep. NOTE:- On Quattro a cut 80mm wide by 90mm deep is required. 3. Remove & discard the aluminium crush beam. 4. Cut out a piece 60mm wide by 75mm deep from the centre of the lower plastic valance’s rear edge. 5. NOTE:- On Quattro a cut 80mm wide by 30mm deep is required. 6. Insert angles LA & RA inside the chassis rails and loosely secure using bolts A with washers WA. 7. Attach crossbar CB to angles LA & RA using bolts B. 8. Tighten all fixings using a calibrated torque tool to the specified torque settings on the towbar drawing and refit the bumper. 9. Attach centre strut CS to crossbar CB using bolts C. 10. Tighten all fixings using a calibrated torque tool to the specified torque settings on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 1:4
615E
Including Powder Coated Finish
AUDI A6 SALOON MAY ‘97—SUMMER ‘04 & AVANT ESTATE (inc. QUATTRO) MARCH ‘98-SUMMER ‘05
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com