Rev 2:1
659E
Powder Coated Finish
MAZDA 5 2005-2010 e11*94/20*6971*00
Components Code
Quantity
CB
1
Crossbar
LP
1
RP
1
Bolt Kit
Description
Code
Quantity
WA
4
10mm Large Round Washers
Left Plate
A
2
12x90 Bolts, Nuts & Grip Washers
Right Plate
B
2
12x40 Set Screws & Grip Washers
C
2
12x40 Set Screws, Nuts & Grip Washers
D
4
10x40 Set Screws & Grip Washers
G
2
16x50 Set Screws & Grip Washers
w902
Description
1. Remove bumper (2 screws at lower edge of wheel arch, 2 screws securing each mud guard to reveal 1 screw at each tip, 2 plastic plugs along lower edge of bumper). Pull out bumper tips to release bumper from push style fixings between bumper and rear wing. Reach inside bumper skin to release 12 plastic clips along inside edge of bumper/ rear hatch line (4 plastic plugs with 3 clips on each). Disconnect fog lamp plug on right hand side. Remove bumper beam. 2. Insert side arms LP and RP into chassis arms and loosely attach using set screws D with washers WA. Re fit bumper. 3. Insert crossbar CB to side arms LP and RP using set screws B and C. 4. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 5. Attach flange neck F to crossbar CB using bolts A. 6. Attach type approved towball (not supplied) to flange neck F using set screws G. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
659E
Powder Coated Finish
MAZDA 5
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com