Rev 2:1
669E
Powder Coated Finish
SEAT ALTEA & SEAT ALTEA XL 2004SEAT LEON (SE350) (Exc FR & SR) 2005-2013 SEAT TOLEDO (SE351) (Exc FR & SR) 2004-2013 e11*94/20*5745*00
Components Code
Quantity
CB
1
Crossbar
F
1
LS
1
RS
1
Bolt Kit
Description
Code
Quantity
WA
6
12mm Large Round Washers
Flange Neck
A
2
12x90 Bolts, Nuts & Grip Washers
Left Strap
B
8
12x35 Bolts & 2 Grip Washers
Right Strap
C
2
12x35 Bolts, Nuts & Grip Washers
G
2
16x50 Bolts, Nuts & Grip Washers
w1047
Description
1. Remove bumper. ALTEA / XL / TOLEDO: 5 tip screws in each wheel arch, top tip screws are hidden below trim, 8 tip screws for ALTEA, 7 for TOLEDO along bottom edge of bumper, 2 tip screws under each light cluster. (To remove light cluster, remove small panel on inner trim and undo large plastic nut on back of light, remove 2 tip screws through plastic trim to inner side and slide light cluster rearward). Disconnect fog lamps, reversing light and sensors if present. LEON: 4 tip screws in each wheel arch, top tip screw is hidden below trim, 7 tip screws along bottom edge of bumper, 3 tip screws under light cluster. (To remove light cluster, remove small panel on inner trim and undo large plastic nut on back of light, remove 2 tip screws through plastic trim to inner side and slide cluster rearward). Disconnect fog lamps, reversing light and sensors if present. 2. Remove crash beam, re fit original bolts into back panel to prevent ingress of water. 3. Insert straps RS and LS into chassis rails and loosely attach using bolts B with washers WA, Note: mounting holes may be covered in tape. Loosely attach crossbar CB to straps LS and RS using bolts B and C. Tighten all bolts. 4. Cut bumper as in bumper cut detail and re fit bumper. 5. Attach flange neck F to crossbar CB using bolts A. 6. Attach type approved towball to flange neck F using bolts G. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
669E
Powder Coated Finish
SEAT ALTEA & SEAT ALTEA XL SEAT LEON (SE350) (Exc FR & SR) SEAT TOLEDO (SE351) (Exc FR & SR)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com