Rev 2:1
672E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts,Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
672E 672ED 672ES
Powder Coated Finish
TOYOTA YARIS (Inc Facelift From 2011) (P90) 2006e11*94/20*6867*00 w519
Components
Mainframe
Code
Quantity
CB
1
Crossbar
LSP
1
RSP
1
Bolt Kit
Description
Code
Quantity
Description
WA
6
10mm Large Round Washers
Left Side Plate
B
6
10x40x1.25 Pitch Set Screws & Grip Washers
Right Side Plate
C
2
12x35 Set Screws & Grip Washers
D
2
12x35 Set Screws, Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Lower exhaust and locate fixing points on inside of chassis rails. Loosely attach left side plate LSP and right side plate RSP to the inside of chassis rails using set screws B with washers WA. 2. Loosely attach crossbar CB to the side plates LSP and RSP using set screws C and D. Tighten all fixings. Re fit exhaust. Detachable neck: Attach detachable neck D to crossbar CB using set screws Z. Swan Neck: Attach swan neck SN to crossbar CB with IP plates using fasteners A. Flange Neck: Attach flange neck F to crossbar CB using bolts A. Attach type approved towball ( not supplied ) using set screws G. 3. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
672E 672ED 672ES
Powder Coated Finish
TOYOTA YARIS (Inc Facelift From 2011) (P90)
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com