Rev 2:4
681E
TOYOTA HILUX 2016-
Powder Coated Finish
E11 55R-0110931
Components Code
Quantity
CB
1
Crossbar
SA
2
SP
2
AV123
1
Bolt Kit
Description
w1059
Code
Quantity
Description
WA
8
12mm Small Round Washers
Side Arms
A
6
12x40 Set Screws, Grip Washers & 4 Nuts
Spacer Plates
B
8
12x40x1.25 Set Screws & Grip Washers
Towball Cover
G
2
16x50 Set Screws, Nuts & Grip Washers
1. Remove rear bumper, 2 fixings either side of chassis. 2. Remove bumper arms from the bumper, 2 fixings either side. Fit spacer plate SP between bumper and bumper arm, tighten fully. 3. Loosely attach side arms SA with set screws B and washers WA to the 2 forward most mounting holes on the chassis. 4. Using the remaining set screws B with washers WA refit bumper to the 2 remaining mounting holes on either side. 5. Loosely attach crossbar CB to the side arms SA using set screws A. 6. Loosely attach type approved towball (not supplied) to crossbar CB using set screws G. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:4
681E
Powder Coated Finish
TOYOTA HI-LUX 2016-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com