Rev 2:5
682ED 682E
RANGE ROVER SPORT 2013-
Including Stratum Powder Coat Finish
E11 55R - 0110932
w864
Components
Mainframe
Code
Quantity
Description
CB
1
Crossbar
LS
1
RS
1
AN
4
Angles
Bolt Kit Code
Quantity
Description
WA
4
12mm Large Round Washers
Left Strap
B
12
12x40 Set Screws, Grip Washers & 8 nuts
Right Strap
R
2
12x40 Rolling Bolts
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.
Remove light cover surrounds, remove lights-2torx screws, remove lower bumper cover-2 quarter turn screws, remove 4 screws on lower edge of bumper, remove undertray-2 bolts, remove bumper-2 fixings on boot shut panel, 2 screws and 1 clip in each wheel arch.
2.
Carefully pull bumper off clips along top edge and release wiring.
3.
Lower exhaust from rear panel, remove impact beam.
4.
Loosely attach crossbar CB to rear panel using original fixings X and re attach exhaust hanger brackets.
5.
Loosely attach straps LS and RS to the crossbar CB using set screws B.
6.
Loosely attach angles AN to the straps LS and RS using set screws B.
7.
Loosely attach angles AN to the chassis using set screws B with washers WA.
8.
Loosely attach straps LS and RS to the forward chassis member using rolling bolts R.
9.
Loosely attach angles AN to the forward chassis member using set screws B with washers WA.
10. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 11. For flange neck option F cut bumper as in diagram. 12. Replace bumper and all panels. Detachable Neck: Attach to crossbar CB using set screws Z. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws G.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:3
682ED 682E
Including Stratum Powder Coat Finish
RANGE ROVER SPORT 2013-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com