Rev 2:5
686E
FIAT DUCATO CHASSIS CAB 2006PEUGEOT BOXER CHASSIS CAB 2006CITROEN RELAY CHASSIS CAB 2006-
Including Stratum Powder Coat Finish
Components Code
Quantity
Description
Bolt Kit Code
Quantity
w2332
Description
CB
1
Crossbar
WC
10
12mm Large Round Washers
LPP
1
Left Panel Plate
WA
6
10mm Large Round Washers
RPP
1
Right Panel Plate
WB
2
10mm Small Round Washers
LA
1
Left Angle
J
2
12x50 Set Screws, Nuts & Grip Washers
RA
1
Right Angle
K
2
16x50 Set Screws, Nuts & Grip Washers
LSA
1
Left Side Arm
E
2
16X50 Set Screws & Grip Washers
RSA
1
Right Side Arm
B
4
10x35 Set Screws, Nuts & Grip Washers
Av123
1
Towball Cover
F
4
10x40 Set Screws, Nuts & Grip Washers
H
4
12x40 Set Screws, Nuts & Grip Washers
C
1
12x40 Set Screw, & Grip Washer
D
1
12x70 Bolt, & Grip Washer
G
2
12x130 Bolts, Nuts & Grip Washers
CN
2
Off Set 12mm Nut Captive Plates
SP
2
Spacers 50x50x10mm Thick
1. Loosely attach panel plates LPP and RPP to the rear panel using set screws F and B with washers WA and WB. 2. Remove the rear most square grommets from the chassis rails. Insert captive nuts CN into the square holes. NOTE: These must be placed into the chassis nut end first then position so that the nut is in the centre of the square hole. 3. Loosely attach left angle LA and right angle RA to captive nuts CN using set screws C and bolt D with washers WC. NOTE: On right hand chassis insert spacers SP between chassis and right angle RA. 4. Loosely attach side arms LSA and RSA to the pre drilled holes in each chassis rail using bolts G with washers WC. 5. Loosely attach side arms LSA and RSA to the angles LA and RA using set screws H with washers WC. 6. Loosely attach crossbar CB to the panel plates LPP and RPP and side arms LSA and RSA using set screws E and J. 7. Attach type approved (not supplied) to the crossbar CB using set screws K. 8. Tighten and check all fixings using a calibrated torque tool to the specified settings on the towbar drawing. PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:4
686E
Including Stratum Powder Coat Finish
FIAT DUCATO CHASSIS CAB 2006PEUGEOT BOXER CHASSIS CAB 2006CITROEN RELAY CHASSIS CAB 2006-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com