Rev 2:3
696E
NISSAN NAVARA D40 2005– NISSAN NAVARA NP300 2015-
Including Stratum Powder Coat Finish
E11 55R—0110778
Components Code
Quantity
CB
1
Crossbar
LA
1
RA
1
PL AV123
Bolt Kit
Description
Code
Quantity
WA
12
12mm Small Round Washers
Left Angle
A
2
12x100 Bolts, Nuts & Grip washers
Right Angle
B
4
12x40 Set Screws, Nuts & Grip Washers
2
Plates
C
4
12x1.25x35 Set Screws & Grip Washers
1
Towball cover
D
8
12x1.25x40 Set Screws
G
2
16x50 Set Screws, Nuts & Grip Washers
w1401
Description
1. Remove and discard towing eye from the vehicle chassis. 2. Clean out all threaded fixing points using a suitable tool. 3. D40 MODELS: Loosely attach angles RA and LA to the chassis using set scxrews D and washers WA. 4. NP300 MODELS: Loosely attach angles LA and RA together with plates PL using set screws D with washers WA. 5. Loosely attach crossbar CB to the chassis using set screws C. 6. Loosely attach crossbar CB to the angles LA and RA using set screws B with washers WA. 7. Attach flange neck F to the crossbar CB using bolts A. 8. Attach type approved towball (not supplied) to the flange neck F using set screws G. 9. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar diagram.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com