Rev 2:1
697E
NISSAN PATHFINDER (R51)
Powder Coated Finish
e11*94/20*6464*00
Components Code
Quantity
RA
1
LA
1
CS
1
CP
1
Description
Bolt Kit Code
Quantity
Right Angle Support
WA
6
12mm Small Washers
Left Angle Support
A
2
16x50 Set Screws, Nuts & Grip Washers
Centre Strut
B
6
12x100 Bolts & Grip Washers
Captive Plate
C
2
12x100 Bolts, Nuts & Grip Washers
w1131
Description
1. Lower spare wheel and position captive strap CP above the rear cross member aligning with holes provided 2. Loosely attach angle supports LA and RA to the rear cross member and captive strap CP using bolts B with washers WA. Attach centre strut CS to the angle supports RA and LA using bolts B . Attach towball A50-1(not provided) using set screws A. 3. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing 4.
Refit spare wheel.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
697E
Powder Coated Finish
NISSAN PATHFINDER (R51)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com