Rev 2:3
706E
GRAND VITARA 5 Door 2005-2014 GRAND VITARA 3 Door 2005-2010
Powder Coated Finish
(Neck Requires Removal When Not Towing) (Rear Exhaust Silencer Left—Right) e11 *94/20*6893*00
Components Code
Quantity
CB
1
Crossbar
CS
1
LA
1
RA
Bolt Kit
Description
Code
Quantity
WA
8
12mm Small Round Washers
Centre Strut
C
2
16x50 Set Screws, Nuts & Grip Washers
Left Angle
B
4
12x40 Set Screws, Nuts & Grip Washers
1
Right Angle
A
6
12x35x1.25 set screws & Grip Washers
AB
2
Angle Brackets
D
2
12x90 Bolts & Nyloc Nuts
LS
1
Left Strap
E
2
12x40x1.25 Set Screws & Grip Washers
RS
1
Right Strap
BU
2
12x26mm Bushes
w1173
Description
1. Remove and discard the towing eye and loosely attach angles LA and RA to the chassis using set screws A with washers WA. 2. On 3 door models only:- attach angle brackets AB to the forward holes of angles LA and RA and to the outside of chassis rails using set screws A with washers WA. Note: on some models the exhaust hanger brackets may require bending inwards to miss angles / straps. 3. On 5 door models only:- attach angle straps LS and RS to the forward mounting point on chassis using set screws E with washers WA and bushes BU. 4. Loosely attach crossbar CB between angles LA and RA using set screws B. 5. Attach centre strut CS to crossbar CB using bolts D. 6. Attach type approved towball (not supplied) using set screws C. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. Note: centre strut CS must be removed when not towing to avoid number plate obscuration.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com