Rev 2:1
743E
Powder Coated Finish
SUZUKI JIMNY (Inc Facelift)1998-
(NECK REMOVAL IS NECESSARY WHEN NOT TOWING)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
SUZUKI JIMNY (Inc Facelift)1998-
743E
(NECK REMOVAL IS NECESSARY WHEN NOT TOWING)
Powder Coated Finish
e11*94/20*2896*00
Components Code
Quantity
CB
1
Crossbar
F
1
LP
1
RP CS
Bolt Kit
Description
Code
Quantity
WB
5
10mm Small Round Washers
Flange Neck
A
2
12x70 Bolts, Nuts & Grip Washers
Left Plate
B
5
10x35 Set Screws & Grip Washers
1
Right Plate
C
3
12x35 Set Screws, Nuts & Grip Washers
2
Captive Strap
G
2
16x50 Set Screws, Nuts & Grip Washers
CP
3
Captive Plates
w942
Description
1. Remove bumper. 2. Insert captive straps CS from behind until the captive nut is lined up with the existing hole in the vehicle frame, loosely attach side plates LP and RP using set screws B. 3. Insert 2 captive plates CP above the left hand towing lug and insert 1 captive plate CP above the right hand towing lug (rear hole). Loosely position crossbar CB to captive plates CP using set screws B and washers WB, attach crossbar CB to side plates LP and RP using set screws C. 4. Attach Flange neck F to crossbar CB using bolts A. 5. Attach type approved towball (not supplied) to flange neck F using set screws G. Tighten and check all fixings. Re-fit bumper. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com