Rev 2:1
764E
Powder Coated Finish
PEUGEOT 206 HATCHBACK CABRIOLET & VAN e11*94/20*2542*00
Components Code
Quantity
Description
CB
1
Crossbar
F
1
SP
2
Bolt Kit
w909
Code
Quantity
Description
WA
2
10mm Square Washers 50x50x3
Flange Neck
A
4
10x40 Set Screws & Grip Washers
Side Plate
B
2
16x50 Set Screws, Nuts & Grip Washers
C
6
12x35 Set Screws, Grip Washers & 4 Nuts
CN
4
10mm Small Cage Nuts
BC12
2
12mm Bolt Cover
1. Lower the spare wheel cage. Remove the exhaust off the 2 rearmost hangers. Remove heat shield (3 fasteners). Remove the 2 nuts holding the bottom tags of the bumper to the rear valance. 2. Cut the bumper as per diagram. 3. Insert cage nuts CN through the slots in the chassis rails and locate them in position. Loosely attach side plates SP using spacer WA between sidearm and chassis on rearmost hole using set screws A. 4. Attach crossbar CB to side plates SP (the bottom bumper tags need to be bent down while crossbar is manoeuvred between the bumper and valance) and loosely attach using set screws C. 5. Attach flange neck F to crossbar CB using set screws C. Attach type approved towball (not supplied) using set screws B. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. Relocate bumper tags with original nuts. Replace heat shield, spare wheel cage and exhaust. Note: on later models the exhaust hanger bracket may have to be adjusted to give extra clearance between exhaust and crossbar.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
764E
Powder Coated Finish
PEUGEOT 206 HATCHBACK CABRIOLET & VAN
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com