Rev 2:1
765E
Powder Coated Finish
RENAULT KANGOO VAN (Exc COMBI VAN) 1998-2009 NISSAN KUBISTAR (Inc Van) 2003-2008
Components Code
Quantity
Description
CB
1
Crossbar
CS
1
CP
2
Bolt Kit Code
Quantity
WA
6
10mm Large Round Washers
Centre Strut
C
2
16x50 Bolts, Nuts & Grip Washers
Captive Plates
D
2
12x80 Bolts, Nuts & Grip Washers
E
2
10x30 Bolts & Grip Washers
A
2
10x70 Bolts & Grip Washers
B
2
10x90 Bolts, Nuts & Grip Washers
BU
2
52x19mm Bushes
SW
2
10mm Square Washers 50x50x3
w1092
Description
1. Remove the 4 innermost rubber inserts from the rear lower panel (2 on the horizontal face and 2 on the vertical face). Position captive plates CP inside the rear panel (feeding them through the 50mm x 20mm slots short side uppermost - 1 captive plate in each aperture). Loosely secure using bolts E and washers SW. 2. Remove rubber bungs from each face on both chassis rails. Place bushes BU into the existing holes in the chassis rails and secure using bolts B with washers WA. 3. Loosely attach crossbar CB to captive plates CP using bolts A and washers WA. 4. Tighten all bolts, ensuring that captive plates are seated properly inside the rear panel. 5. Attach centre strut CS to crossbar CB using bolts D. Attach type approved towball (not supplied) using bolts C. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
765E
Powder Coated Finish
RENAULT KANGOO VAN (Exc COMBI VAN) 1998-2009 NISSAN KUBISTAR (Inc Van) 2003-2008
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com