Rev 2:1
766E
Powder Coated Finish
RENAULT MASTER VAN (Inc Facelift) 1998—2010 VAUXHALL MOVANO (Inc Chassis Cab & Pick Up) 1998—2010 NISSAN INTERSTAR (Inc Chassis Cab & Pickup) 2002—2011
Components Code
Quantity
Description
CB
1
SP
2
AN
2
Angles
Bolt Kit Code
Quantity
Crossbar
WB
4
10mm Large Round Washers
Side Plates
WA
4
12mm Large Round Washers
E
2
16x50 Bolts, Nuts & Grip Washers
B
4
10x40 Bolts & Grip Washers
C
2
10x35 Bolts, Nuts & Grip Washers
A
4
12x30 Bolts & Grip Washers
D
2
12x40 Bolts, Nuts & Grip Washers
F
2
12x40 Bolts & Grip Washers
w1015
Description
1. Remove and discard the original bumper mounting from the left and right hand chassis rails. Locate 4 vertical threaded holes and loosely attach angles AN to these holes using bolts A and washers WA. 2. Loosely attach side plates SP to the original bumper mounting points using bolts B and washers WB, also angles AN using bolts C. 3. Attach crossbar CB to the side plates SP using bolts D and F. 4. Attach type approved towball (not supplied) to crossbar CB using bolts E. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com