Rev 2.1
801E
MITSUBISHI Challenger 1999 MITSUBISHI Sport 1999 - (Inc 4 Work)
Powder Coated Finish
(Spare Wheel Underneath) e11*94/206134*00
Components Code
Quantity
CB
1
Description Crossbar
Bolt Kit Code
Quantity
WA
6
12mm Large Round Washers
C
2
16x50 Set Screws, Nuts & Grip Washers
A
2
12x1.25x35 Set Screws & Grip Washers
B
4
12x120 Bolts, Nuts & Grip Washers
w999
Description
1. Remove both towing eyes from the ends of chassis rails. 2. Loosely attach crossbar CB to existing holes in chassis rails using set screws A and bolts B with washers WA. 3. Attach type approved towball (not supplied) using set screws C. 4. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
801E
Powder Coated Finish
MITSUBISHI Challenger MITSUBISHI Sport (Inc 4 Work) (Spare Wheel Underneath)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com