Rev 2:1
829E
Powder Coated Finish
PEUGEOT PARTNER ORIGIN VAN & COMBI CITROEN BERLINGO FIRST & MULTISPACE e11*94/20*5665*00
e
Components Code
Quantity
CB
1
Crossbar
LA
1
RA
1
Bolt Kit
Description
Code
Quantity
w932
Description
A
2
10x25 Set Screws & Grip Washers
Left Angle
WA
2
10mm Small Round Washers
Right Angle
WB
4
10mm Large Round Washers
E
2
16x50 Set Screws, Nuts & Grip Washers
B
2
10x80 Bolts, Nuts & Grip Washers
C
2
10x90 Bolts, Nuts & Grip Washers
D
4
10x30 Set Screws, Nuts & Grip Washers
BU
4
54x14mm Bushes
1. Remove spare wheel and lower the exhaust from rubber mountings and remove heat shield where fitted. Detach two bumper clips on the bottom edge to allow flexibility and cut out a section in the bumper as shown in diagram. 2. Locate two existing holes in the rear panel and drill out 11mm. Loosely attach crossbar CB to these holes using bolts A with washers WA. 3. Locate two holes on the inside face of each chassis rail. Insert bushes BU from the outside faces of the chassis and attach angles LA and RA to the chassis using bolts B and C with washers WB on the outside of the chassis. 4. Attach crossbar CB to the angles LA and RA using set screws D. 5. Attach type approved towball (not supplied) using set screws E. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 7. Replace spare wheel, exhaust and bumper clips.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
829E
Powder Coated Finish
PEUGEOT PARTNER ORIGIN VAN & COMBI CITROEN BERLINGO FIRST & MULTISPACE
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com