Rev 2:4
843E
MITSUBISHI L200 2006–2015 MITSUBISHI L200 Sept 2015(Exc Long Bed Variant)
Powder Coated
E11 55R-0110753
Components Code
Quantity
CB
1
SP
2
AN
2
LCB RCB
Bolt Kit
Description
Code
Quantity
Crossbar
WA
8
12mm Large Round Washers
Side Plates
WB
4
10mm Small Round Washers
Angles
G
2
16x50 Set Screws, Nuts & Grip Washers
1
Left Captive Bracket
D
4
10x1.25 x40 Set Screws & Grip Washers
1
Right Captive Bracket
A
14
12x35 Set Screws, Nuts & Grip Washers
B
2
12x35 Set Screws & Grip Washers
NT
2
12mm Nuts & Grip Washers
w1514
Description
1.
On older models with stainless steel bumpers remove the spacers between the chassis and bumper arms.
2.
On models 2015 onwards, remove the rear step from the black under run support bar.
3.
On all models, remove the black under run bar where fitted.
4.
Loosely attach side plates SP to the chassis rails using captive brackets LCB and RCB to the forward holes (check towbar drawing for variant clarification) and secure using nuts NT.
5.
Secure side plates SP together with chrome bumper (this only applies to pre 2015 models) using set screws A and washers WA.
6.
Loosely attach angles AN to the chassis rails using set screws A and washers WA, then attach to side plates SP using set screws A
7.
Loosely attach crossbar CB to side plates SP using set screws A and B.
8.
Attach type approved towball (not supplied) using set screws G.
9.
Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
10. Models from 2015 onwards re attach bumper step to slots provided in the side plates SP using set screws D and washers WB.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
MITSUBISHI L200 PICKUP
843E
Powder Coated Finish
(Curved Body) (Inc 4 Work, 4 Life, Warrior and Models with Stainless Steel Underrun Bumper, Models with Lower Valance & Trojan) (Exc Long Bed Pick Up 2009-)
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com