Rev 2:1
886E
Powder Coated Finish
TOYOTA HI-ACE POWERVAN & GRANVIA H10 (IMPORT) 2WD, 4WD, SWB & LWB LATE 1995 - 2011 (Exc MINIBUS)
Components Code
Quantity
Description
CB
1
Crossbar
LP
1
RP
1
AN
2
Bolt Kit Code
Quantity
WA
12
12mm Large Round Washers
Left Plate
C
2
16x50 Bolts, Nuts & Grip Washers
Right Plate
A
6
12x1.25x30 Bolts & Grip Washers
Angle
B
6
12x35 Bolts, Nuts & Grip Washers
E
2
12x35 Bolts & Grip Washers
D
2
12x100 Bolts, Nuts & Grip Washers
BU
2
65x19mm Bushes
w1461
Description
1. Remove REMOVE and ANDdiscard DISCARD the THE towing TOWING eyesEYES bolted BOLTED to theTO chassis THE CHASSIS rails. RAILS. 2. Loosely LOOSELYattach ATTACH plates PLATES LP andRP LP AND toRP captive TO CAPTIVE nuts in NUTS chassis INusing CHASSIS bolts USING a andBOLTS washers A AND WA . On the imported granvia WASHERS there are no WAcaptive . ON THE nuts IMPORTED in the forward GRANVIA holes. THERE DrillARE outNO theCAPTIVE hole blanks NUTStoINaccept THE FORWARD bushes BU. Attach the plates LP HOLES. and RP using DRILLbolts OUT D THE bushes HOLEBU BLANKS and washers TO ACCEPT WA. BUSHES Attach angles BU. ATTACH AN to plates THE PLATES LP andLP RPAND using bolts B and to the chasRP using sis USINGbolts BOLTS B and D BUSHES washers BUWA. AND WASHERS WA. ATTACH ANGLES AN TO PLATES LP AND RP USING BOLTS B AND TO THE CHASSIS USING BOLTS A AND WASHERS WA. 3. Loosely attach crossbar CB to the plates LP and RP using bolts B and E. 3. LOOSELY ATTACH CROSSBAR CB TO THE PLATES LP AND RP USING BOLTS B AND E. 4. Check and tighten all fixings using a calibrated torque tool to the recommended torque settings on the towbar 4. CHECK drawing. AND TIGHTEN ALL BOLTS
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com