Rev 2:1
95E
ISUZU D Max 4WD 2012-
Powder Coated Finish
(With Bumper)
E11 55R-0110124 Components
Code
Quantity
Description
CB
1
Crossbar
SP
2
CP
2
AB
2
Bolt Kit
w1455
Code
Quantity
Description
WA
10
12mm Small Round Washers
Side Plates
B
2
16x50 Set Screws, Nuts & Grip Washers
Captive Plates
A
10
12x35 Set Screws, Grip Washers & 4 Nuts
Angle Brackets
C
6
12x35x 1.25 Pitch Set Screws & Grip Washers
D
2
12x80 Bolts, Nuts & Grip Washers
BU
2
52x25mm Diameter Powder coated Bushes
1. Working on one side of the vehicle remove the 3 bolts securing the bumper arm to the chassis & unclip the wiring loom. Support the bumper. 2. Loosely attach side plate SP to the chassis rail using set screws C with washers WA sandwiching the bumper support arm between the chassis & side plate. 3. Insert captive plate CP into the chassis rail and loosely attach angle bracket AB to the chassis using set screws A with washers WA. 4. Loosely attach angle bracket AB to side plate using bolt D with bush BU. 5. Repeat the procedure on the opposite side of the vehicle. 6. Attach crossbar CB to the side plates using set screws A. 7. Attach preferred type approved towball (not supplied) using set screws B. 8. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing also ensuring the towbar is level & face plate vertical.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
95E
Powder Coated Finish
ISUZU D Max 4WD 2012-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com