Toilets. To see the full raymor range visit raymor.com.au
1
What to consider when selecting a toilet Dare we say it, toilets these days are pretty trendy. With a wide range of designs and options to choose from, the toilet you get could make or break your bathroom look. However, you also need to factor in details about plumbing, use and available space.
2
Installation type Back-to-Wall (BTW)
Close Coupled (C/C)
These toilets sit flush to the wall, concealing the inlet and waste pipes. This makes cleaning around the toilet much easier.
The most common and affordable toilet. The cistern sits near the wall and the rear of the pan is offset from the wall.
Wall-faced/ Wall-hung
Comfort/Easy Height suites
Only the toilet pan is visible, and the cistern is concealed behind the wall. Perfect for small bathrooms. Wallhung toilets have space underneath and Wall-faced toilets the pan sits on the floor.
These have an increased pan height for your comfort.
Tips for selecting a toilet Try before you buy Well, not really. But if possible, sit on the toilet and test how the lid and seat lift. Know what you’re getting.
Think about the space around you When planning the position of your toilet, allow at least 20cm on either side for elbow room.
To see the full raymor range visit raymor.com.au
Keep a record of what you’ve bought
Know your set-out measurements
Just in case you need to replace any parts, it always helps if you’ve kept the receipt or noted down the toilet brand and design so that you can replace it with a like-for-like swap-out.
This is the distance from your wall or floor to the centre of the wastepipe in your floor, depending on the type of toilet you have. You must know this figure. Without it, your toilet might not fit.
If you’re replacing an existing toilet
Some councils have water efficiency rules
Always check with your plumber about your options first. There will be specs that suit your existing bathroom best. With our range, you’re sure to meet these needs with a style you like.
Toilets come with WELS ratings according to their water efficiency. Some councils require a minimum WELS rating for your toilet, so be sure to check this first.
3
Rimless Close Coupled Toilet Suites.
4
Classic Rimless Close Coupled Suite S Trap Product code
194379
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
S Trap
Set Out
S Trap set out 153mm as standard
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Seat, Installation Instructions
Classic Rimless Close Coupled Suite P Trap Product code
194380
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
P Trap
Set Out
P Trap Set Out 185mm floor to centre of outlet
To see the full raymor range visit raymor.com.au
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Seat, Installation Instructions
5
Rimless Back to Wall Suites.
6
Atlanta Rimless Back to Wall Suite (Standard Seat) Product code
194381
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 65 to 175mm optional 145 to 240mm (optional bend 136002)
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Atlanta Rimless Back to Wall Suite (Slim Seat) Product code
194382
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 65 to 175mm optional 145 to 240mm (optional bend 136002) To see the full raymor range visit raymor.com.au
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
7
Alpha Rimless Back to Wall Suite (Standard Seat) Product code
194383
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out S-trap 75mm - 190mm as standard. P-trap 185mm floor to centre of outlet. Optional S-trap 145mm - 225mm sold seperately.
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Alpha Rimless Back to Wall Suite (Slim Seat) Product code
194384
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out S-trap 75mm - 190mm as standard. P-trap 185mm floor to centre of outlet. Optional S-trap 145mm - 225mm sold seperately. 8
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Edge II Rimless Back to Wall Suite (Slim Seat) Product code
202492
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 90 to 165mm optional 150 to 225mm (optional bend 136002)
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI universal inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Edge II Rimless Back to Wall Suite (Standard Seat) Product code
202493
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 90 to 165mm optional 150 to 225mm (optional bend 136002) To see the full raymor range visit raymor.com.au
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI universal inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions 9
Edge II Rimless Comfort Height Suite (Standard Seat) Product code
194385
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 65 to 175mm optional 145 to 250mm (optional bend 136002)
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Edge II Rimless Comfort Height Suite (Slim Seat) Product code
194386
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 65 to 175mm optional 145 to 250mm (optional bend 136002) 10
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
WDI Universal inlet valve
Outlet Valve
WDI Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Winton Rimless Back to Wall Suite (Slim Seat) Product code
203149
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out S-trap 90mm-165mm as standard. P-trap 185mm floor to centre of outlet. Optional S-trap 150mm-225mm sold seperately.
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
R&T Side entry inlet valve
Outlet Valve
R&T Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Winton Rimless Back to Wall Suite (Standard Seat) Product code
203150
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out S-trap 90mm-165mm as standard. P-trap 185mm floor to centre of outlet. Optional S-trap 150mm-225mm sold seperately. To see the full raymor range visit raymor.com.au
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
R&T Side entry inlet valve
Outlet Valve
R&T Dual Flush Outlet Valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
11
Winton Rimless Comfort Height Suite (Standard Seat) Product code
203151
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out P - Trap 185mm S - Trap standard 75 to 170mm optional 150 to 230mm (optional bend 136002)
Seat Type
Soft Close, Quick release with metal hinges
Inlet Valve
Universal R&T inlet valve suits back and bottom entry
Outlet Valve
4.5/3L dual flush outlet valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Winton Back To Wall Comfort Height Toilet Suite (Slim Seat) Product code
289076
WELS Rating
4 Star 3.5L Avg Flush
Material
Vitreous china
Rim Type
Rimless
Trap Type
Universal S & P
Set Out P - Trap 185mm S - Trap standard 75 to 170mm optional 150 to 230mm (optional bend 136002) 12
Seat Type
Soft Close, Quick release metal hinges
Inlet Valve
Universal R&T inlet valve suits back and bottom entry
Outlet Valve
4.5/3L dual flush outlet valve
Inclusions
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
To see the full raymor range visit raymor.com.au
13
Rimless Inwall Toilet Suites.
14
Edge II Rimless Wall Faced Pan (Slim Seat) Product code
203147
Seat Type
WELS Rating
4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern sold separately)
Soft close slim seat, quick release metal hinges
Cistern Compatibility
Compatible with 133137 In Wall Cistern (sold separately)
Inclusions
Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Material
Vitreous China
Rim Type
Rimless
Trap Type
Universal
Set Out
P-trap 185mm S-trap 90mm -105mm as standard Extended S-trap 150mm-165mm optional (136002 sold seperately)
Reduced S-trap 60-90mm optional (181055 sold separately) Extended S-trap 95-125mm optional (181054 sold separately)
Edge II Rimless Wall Faced Pan (Standard Seat) Product code
203148
Seat Type
WELS Rating
4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern sold separately)
Soft close seat, quick release metal hinges
Cistern Compatibility
Compatible with 133137 In Wall Cistern (sold separately)
Material
Vitreous China
Inclusions
Rim Type
Rimless
Trap Type
Universal
Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Set Out
P-trap 185mm S-trap 90mm -105mm as standard Extended S-trap 150mm-165mm optional (136002 sold seperately)
To see the full raymor range visit raymor.com.au
Reduced S-trap 60-90mm optional (181055 sold separately) Extended S-trap 95-125mm optional (181054 sold separately) 15
Cistern. In Wall Cistern Product code
133137
WELS Rating
4 Star 3.5L Avg Flush
Material
Foam insulated ABS tank
Width
480mm
Thickness
98mm - 148mm
Height
680mm - 830mm
Height adjusment range
150mm
Operation
Mechanical
Compatability
Suitable for Raymor Wall Faced Pans 203147, 203148
Inlet Valve
Side entry inlet valve (fixed top left water point)
Outlet Valve
4.5/3L dual flush outlet valve
Buttons
Not included
Inclusions
Cistern, Installation instructions
16
Buttons.
To see the full raymor range visit raymor.com.au
Dual Flush Plate, Round, Stainless Steel Product code
133599
Material
Stainless steel
Finish
Brushed
Width
236mm
Height
152mm
Plate thickness
11.5mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
17
Dual Flush Plate, Round, Matte Black ABS
Finish
Matte Black
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
Material
Operation
15 10 3.0
153204
152
Product code
Dual Flush Plate, Round, Brushed Nickel Material
ABS
Finish
Brushed Nickel
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
275326
15 10
152
3.0
Product code
18
Dual Flush Plate, Round, Matte Silver ABS
Finish
Matte Silver
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
Material
Operation
15 10 3.0
285372
152
Product code
Dual Flush Plate, Round, Chrome Material
ABS
Finish
Chrome plated
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
153205
15 10
152
3.0
Product code
To see the full raymor range visit raymor.com.au
19
Wall Dual Flush Button, Round, Gloss White Product code
290623
Material
ABS
Finish
Gloss White
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
1 x Flush Button Installation Instructions *etched logo may vary, updated on 2024 stock
152
3
18. 4
20
10
236
10
Dual Flush Plate, Oval, Black ABS
Finish
Matte Black
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236 10
Material
Operation
15 10 3.0
275330
152
Product code
Dual Flush Plate, Oval, Matte Silver ABS
Finish
Matte Silver
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236 10
Material
Operation
15 10 3.0
285374
152
Product code
To see the full raymor range visit raymor.com.au
21
Dual Flush Plate, Oval, Chrome ABS
Finish
Chrome Plated
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236 10
Material
Operation
15 10 3.0
275329
152
Product code
Dual Flush Plate, Oval, Brushed Nickel Material
ABS
Finish
Brushed Nickel
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236 10
275331
15 10
152
3.0
Product code
22
Wall Dual Flush Button, Oval, Gloss White Product code
290622
Material
ABS
Finish
Gloss White
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cisterns 133141 and 133137
Inclusions
1 x Flush Button Installation Instructions *etched logo may vary, updated on 2024 stock
Wall Dual Flush Button, Square, Gloss White Product code
290624
Material
ABS
Finish
Gloss White
Width
236mm
Height
152mm
Plate thickness
8mm
To see the full raymor range visit raymor.com.au
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cisterns 133141 and 133137
Inclusions
1 x Flush Button Installation Instructions *etched logo may vary, updated on 2024 stock 23
Dual Flush Plate, Rectangular, Black ABS
Finish
Matte Black
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
Material
Operation
15 10 3.0
275327
152
Product code
Dual Flush Plate, Rectangular, Chrome Material
ABS
Finish
Brushed Nickel
Width
236mm
Height
152mm
Plate thickness
8mm
Operation
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
10
153203
15 10
152
3.0
Product code
24
Dual Flush Plate, Rectangular, Matte Silver ABS
Finish
Matte Silver
Width
236mm
Height
152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
236
Flush plate, Installation instructions
10
Material
Operation
15 10 3.0
285373
152
Product code
Dual Flush Plate, Rectangular, Brushed Nickel Material
ABS
Finish
Brushed Nickel
Width
236mm 152mm
Plate thickness
8mm
Mechanical, half and full flush
Compatibility
Suitable for installation with In Wall Cistern 133137
Inclusions
Flush plate, Installation instructions
236
15 10
152
Height
Operation
10
275328
3.0
Product code
To see the full raymor range visit raymor.com.au
25
26
To see the full raymor range visit raymor.com.au
27
Whilst all care has been taken to ensure that all details are correct at the time of print, we reserve the right to correct any errors, inaccuracies, or omissions. Tradelink excludes liability for any advice or information contained in this catalogue. Readers should rely on their own enquiries in making any decisions about any of the products in this catalogue. Written measurements and line drawing measurements vary and should be verified. Variation in measurements exists due to manufacturing process, installation type and product differentiation. ©Tradelink Pty Ltd 2023 Published November 2023.
raymorau raymorau raymor.com.au
Exclusive to 28