Toilets.
What to consider when selecting a toilet
Dare we say it, toilets these days are pretty trendy. With a wide range of designs and options to choose from, the toilet you get could make or break your bathroom look. However, you also need to factor in details about plumbing, use and available space.
Installation type
Back-to-Wall (BTW)
These toilets sit flush to the wall, concealing the inlet and waste pipes. This makes cleaning around the toilet much easier.
Close Coupled (C/C)
The most common and affordable toilet. The cistern sits near the wall and the rear of the pan is offset from the wall.
Wall-faced/
Wall-hung
Only the toilet pan is visible, and the cistern is concealed behind the wall. Perfect for small bathrooms. Wallhung toilets have space underneath and Wall-faced toilets the pan sits on the floor.
Comfort/Easy
Height suites
These have an increased pan height for your comfort.
Tips for selecting a toilet
Try before you buy
Well, not really. But if possible, sit on the toilet and test how the lid and seat lift. Know what you’re getting.
Keep a record of what you’ve bought
Just in case you need to replace any parts, it always helps if you’ve kept the receipt or noted down the toilet brand and design so that you can replace it with a like-for-like swap-out.
Know your set-out measurements
This is the distance from your wall or floor to the centre of the wastepipe in your floor, depending on the type of toilet you have. You must know this figure. Without it, your toilet might not fit.
Think about the space around you
When planning the position of your toilet, allow at least 20cm on either side for elbow room.
If you’re replacing an existing toilet
Always check with your plumber about your options first. There will be specs that suit your existing bathroom best. With our range, you’re sure to meet these needs with a style you like.
Some councils have water efficiency rules
Toilets come with WELS ratings according to their water efficiency. Some councils require a minimum WELS rating for your toilet, so be sure to check this first.
Rimless Close Coupled Toilet Suites.
Classic Rimless Close Coupled Suite S Trap
Product code 194379
WELS 4 Star 3.5L Avg Flush Reg. L08141
Material Vitreous China
Rim Type Rimless
Trap Type S Trap
Set Out S Trap set out 153mm as standard
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Seat, Installation Instructions
Classic Rimless Close Coupled
Suite P Trap
Product code 194380
WELS 4 Star 3.5L Avg Flush Reg. L08135
Material Vitreous China
Rim Type Rimless
Trap Type P Trap
Set Out P Trap Set Out 185mm floor to centre of outlet
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Seat, Installation Instructions
Rimless Backto-Wall Suites.
Atlanta Rimless Back-to-Wall Suite (Standard Seat)
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
P - Trap 185mm
S - Trap standard 65 to 175mm
optional 145 to 240mm (optional bend 136002) Seat
Atlanta Rimless Back-to-Wall Suite
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
P - Trap 185mm
S - Trap standard 65 to 175mm
optional 145 to 240mm (optional bend 136002) Seat
Alpha Rimless Back-to-Wall Suite (Standard Seat)
Product code 194383
WELS 4 Star 3.5L Avg Flush Reg. L08137
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
S-trap 75mm - 190mm as standard.
P-trap 185mm floor to centre of outlet.
Optional S-trap 145mm - 225mm sold separately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal Inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Alpha Rimless Back-to-Wall Suite (Slim Seat)
Product code 194384
WELS 4 Star 3.5L Avg Flush Reg. L08137
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
S-trap 75mm - 190mm as standard.
P-trap 185mm floor to centre of outlet.
Optional S-trap 145mm - 225mm sold separately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal Inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Edge II Rimless Back-to-Wall Suite (Slim Seat)
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
P - Trap 185mm
S - Trap standard 90 to 165mm
optional 150 to 225mm (optional bend 136002)
Edge II Rimless Back-to-Wall Suite (Standard Seat)
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
P - Trap 185mm
S - Trap standard 90 to 165mm
optional 150 to 225mm (optional bend 136002) Seat
valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
P - Trap 185mm
S - Trap standard 65 to 175mm optional 145 to 250mm (optional bend 136002) Seat
P - Trap 185mm
S - Trap standard 65 to 175mm optional 145 to 250mm (optional bend 136002)
Winton Rimless Back-to-Wall Suite (Slim Seat)
Product code 203149
WELS 4 Star 3.5L
Material Vitreous China
Rim Type Rimless
Trap
Set Out
S-trap 90mm-165mm as standard.
P-trap 185mm floor to centre of outlet.
Optional S-trap 150mm-225mm sold separately.
Winton Rimless Back-to-Wall Suite (Standard Seat)
Product code 203150
WELS 4 Star 3.5L Avg Flush Reg. L08139
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out
S-trap 90mm-165mm as standard.
P-trap 185mm floor to centre of outlet.
Optional S-trap 150mm-225mm sold separately.
Winton Rimless Comfort Height
S
Rimless Inwall Toilet Suites.
Edge II Rimless Wall Faced Pan
(Slim Seat)
Product code
WELS 4 Star 3.5L Avg Flush Reg. L08143 (when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Out
P-trap 185mm
S-trap 90mm -105mm as standard
Extended S-trap 150mm-165mm
optional (136002 sold separately)
Seat Type Soft close slim seat, quick release metal hinges
Cistern
Compatibility Compatible with 133137 In Wall Cistern (sold separately)
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Reduced S-trap 60-90mm optional (181055 sold separately)
Extended S-trap 95-125mm optional (181054 sold separately)
Edge II Rimless Wall Faced Pan (Standard Seat)
Product code 203148
WELS 4 Star 3.5L Avg Flush Reg. L08143
(when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless
Trap Type Universal
P-trap 185mm
S-trap 90mm -105mm as standard
Extended S-trap 150mm-165mm optional (136002 sold separately)
Seat Type Soft close seat, quick release metal hinges
Cistern
Compatibility Compatible with 133137 In Wall Cistern (sold separately)
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Reduced S-trap 60-90mm optional (181055 sold separately)
Extended S-trap 95-125mm optional (181054 sold separately)
Cistern.
In Wall Cistern
Product code 133137
WELS 4 Star 3.5L Avg Flush Reg. L08143
Material Foam insulated ABS tank
Width 480mm
Thickness 98mm - 148mm
Height 680mm - 830mm
Height adjusment range 150mm
Operation Mechanical
Compatability Suitable for Raymor Wall Faced Pans 203147, 203148
Inlet Valve Side entry inlet valve (fixed top left water point)
Outlet Valve 4.5/3L dual flush outlet valve
Buttons Not included
Inclusions Cistern, Installation instructions
Buttons.
Dual Flush Plate, Round, Stainless Steel
Product code 133599
Material Stainless steel
Finish Brushed
Width 236mm
Height 152mm
Plate thickness 11.5mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Matte Black
Product code 153204
Material ABS
Finish Matte Black
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Brushed Nickel
Product code 275326
Material ABS
Finish Brushed Nickel
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Matte Silver
Product code 285372
Material ABS
Finish Matte Silver
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Chrome
Product code 153205
Material ABS
Finish Chrome plated
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Gloss White
Product code 290623
Material ABS
Finish Gloss White
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions 1 x Flush Button
Installation
Instructions
*etched logo may vary, updated on 2024 stock
Dual Flush Plate, Oval, Black
Product code 275330
Material ABS
Finish Matte Black
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Matte Silver
Product code 285374
Material ABS
Finish Matte Silver
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Chrome
Product code 275329
Material ABS
Finish Chrome Plated
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Brushed Nickel
Product code 275331
Material ABS
Finish Brushed Nickel
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Gloss White
Product code 290622
Material ABS
Finish Gloss White
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cisterns 133141 and 133137
Inclusions 1 x Flush Button
Installation
Instructions
*etched logo may vary, updated on 2024 stock
Dual Flush Plate, Rectangular, Gloss White
Product code 290624
Material ABS
Finish Gloss White
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cisterns 133141 and 133137
Inclusions 1 x Flush Button
Installation
Instructions
*etched logo may vary, updated on 2024 stock
Dual Flush Plate, Rectangular, Black
Product code 275327
Material ABS
Finish Matte Black
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Chrome
Product code 153203
Material ABS
Finish Brushed Nickel
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Matte Silver
Product code 285373
Material ABS
Finish Matte Silver
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Brushed Nickel
Product code 275328
Material ABS
Finish Brushed Nickel
Width 236mm
Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall Cistern 133137
Inclusions Flush plate, Installation instructions
Whilst all care has been taken to ensure that all details are correct at the time of print, we reserve the right to correct any errors, inaccuracies, or omissions. Tradelink excludes liability for any advice or information contained in this catalogue. Readers should rely on their own enquiries in making any decisions about any of the products in this catalogue.
Written measurements and line drawing measurements vary and should be verified. Variation in measurements exists due to manufacturing process, installation type and product differentiation.
©Tradelink Pty Ltd 2024