Trader 142 Summer 2017

WORLDWIDE PATENTED

FIXED-TURNING Unmistakably the best!

TM

®

• www.newen.com • www.facebook.com/newenfixedturning PERMIT 438 HUNT. BCH CA

PAID PRSRT STD US POSTAGE

4 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 5

NEW! Stainless Steel Piston Ring Grinder Stainless Steel Ring Grinder: Our New ultimate ring grinder is made of 303 Stainless Steel. Offering features such as: • Dead Nuts (automatic indicator zero reference return) • The adjustable ring mounting plate has a special 1 inch T-nut allowing complete usage of the abrasive wheel and has ring reference Indicator grooves, for faster and easier initial set up.

• Additional adjustable stops for grinding oil rings.

• New improved billet stainless ring clamp screws • It offers a high performance variable speed motor • 0-2750 rpms

Turntables are available in 3 sizes. 4”, 5” and 6”

New! 1” slot and adjustment system!

Add a Borzon or Diamond Grinding Disk to any unit for an additional $325.00 RG-9000-D – Ultimate Stainless Steel Ring package contains all 3 turntables and a Diamond or Borzon wheel – $2495.00

• The 4” table accommodates bore sizes from 2.300” to 4.000” • The 5” table accommodates bore sizes from 3.500” to 5.000” • The 6” table accommodates bore sizes from 4.500” to 6.000

Choice of Grinding Disks

• PSA Micron Disks • Borzon Grinding Disks are available in 180, 220, 320 grit • Diamond Grinding Disks are available in 180, 220, 320 grit • Deburring wheels are available in Cratex or Scotch Brite Micron

Diamond or Borzon

RG-9000-4 - Disk, 4” Turntable ..................................$1,455.00 ...... $1,755.00 RG-9000-5 - Disk, 5” Turntable ..................................$1,555.00 ......$1,855.00 RG-9000-6 - Disk, 6” Turntable ..................................$1,655.00 ......$1,955.00

Piston Ring Squaring Tool

• Fast, easy and repeatable fixture for squaring • Rings in the bore prior to setting end gaps.

Covers bores from 2.000” to 5.000” and will clear head studs.

• Places rings 1.000” below the deck to get past head bolt distortion.

• No wrenches required.

• Change bore sizes in RG-9000-T-6 6” Turntable RG-9000-T-5 5” Turntable RG-9000-T-4 4” Turntable seconds! from 3” to 6” rings - $450 from 3” to 5” rings - $400 from 2” to 4” rings - $350 • NEW! Goes from 5.0” - 8.0” all the same features. Red Anodized.

ST-RST - 2.0” - 5.0” - $90.00 ABS Products • 714-671-0728 ST-RST-D - 5.0” - 8.0” - $120.00 ST-RST-3 - New 3” depth - $50.00* ABS-Products.com • youtube.com/absproducts *for use with Torque Plates

Wingnuts machined from billet stock just for us!

6 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 7

We are the...

Kings of

Heavy Metal!

Call us regarding your custom balancing or chassis weighting need!

714-671-0728 Pieces Diameter by 2 ea. 1.550” x 2 ea. 1.550” x 50 ea. 1.275” x 38 ea. 1.255” x 12 ea. 1.110” x 4 ea. .830” x 1 ea.

1.110” x 1 ea. 1.040” x 1 ea.

1.130” x Rough Bars (oversized) As of: 07/18/2016

Length 8” 16” 16” 16” 28” 24” 28” 22” 13”

Chassis weights for welding on to chassis many sizes up to 4” x 5” and larger, various thicknesses, .125” to .375”.

Special weights for use inside steel pans, NASCAR teams run up to 20 lbs. next to ground at bottom of their pans.

11 pounds in a quarter midget seats, call Pan manufacturers call us: We have special deals!

591 W. Apollo St. • Brea, CA 92621 Phone: (714) 671-0728 Fax: (714) 671-0836

8 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

We’ve Made top quality Affordable!™

• www.facebook.com/nwntooling

Inquiries:

contact@newen.com +1-760-233-0067 www.newen.com

NWN FORM TOOLS, the very best money can buy!

• Each profile is ground one at a time • Each profile is checked for accuracy • 300+ profiles in stock • Same day shipping • No minimum • Custom profiles on request ...

Complete line of tooling also available, including tungsten carbide pilots, tool holders, tip holders, tool setting fixture, precision run out gauge, fixed-cutters, screws, screw-drivers, drive adapators, ball heads, precision t-level ...

ERT SUMMER 2017 P7.indd 1

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 9 5/25/17 11:01 AM

Pressure Tester

D C

Model: 6000

T

Small Cap Grinder Model: 6200HD

Honing Jig

Pressure Tester

Small Cap Grinder

Honing Jig

Set-up most heads in less than 5 mins.

Unique cradle lifting system Fully adjustable jack posts Test with air to 60 lbs or water to 100 lbs Maximum head capacity :18” X 48” X 10”

High precision grinder Stone tilts to original mating surface Indexable back to 90° to grind side Will do caps up to 3’’ high and 9’’ wide Able to dress stone with work in place

Clamps vertical for no OD Distortion Capacity ID: 2” - 7” Height: Machine Capacity

Delta Custom Tools

T: (604) 946 - 6248 F: (604) 946 - 6258 E: dcttools@telus.net www.deltacustomtools.com

12 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

Berco AB651VS Rod Boring Machine 

Insert Cutting Bits



Variable Spindle Speed



Variable Boring Feed Rate



Bore Both Big & Small End Of Rods



Optional Digital Center To Center Display



Correct Or Vary Center To Center Lengths



Corrects Twist & Bend To Eliminate End Lock

Bore Bushed Rods Or Bore Press-Fit Rods For Bushings

Failures Optional Digital Readout For Center To Center Length

w w w . j oe b ak e r eq u i p s a l es . c o m

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 15

16 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Get Your CNC Mill

Back Online!

There is an old adage that goes, “If it ain’t broke, don’t fix it!”

The opposite is true as well! Perhaps you have a CNC Mill in your shop and your operating system or your programming interface is dated, erratic or just not as user-friendly as you’d like it to be. We understand that your investment in CNC equipment probably pushed the limits of your budget at the time of purchase, which means if that same machine is not operational or unpredictable now it’s costing you money to sit there. We face the same issues you do from a manufacturer point of view, machines age and require maintenance and when they do you have to call for help.

• • • •

Use existing block fixture or install 10” riser and rotary Integrated probing system Enjoy all the functions of our TS-1000!

Use existing boring heads or upgrade to full industrial tooling available from any industrial tool supplier • Make torque plates, carb flanges or any other part, one-off or production parts!

• Use existing line bore or add The T&S Helical System • Best value in the industry with more features!

Call today and let us help you get your milling machine back online and producing profits for your company!

T&S Technical is a phone call away!

F65 packages available!

Made in U.S.A.

We listen and we respond with solutions!

Upgrade your spindle motor for faster cutting speeds!

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Introducing the Latest Innovation in Balancing Software!

When T & S Machines and Tools, Inc acquired the Stewart Warner/Probal project and determined to take balancing to the next level we held an automotive crankshaft in the air and built a balancer around it. The compact design fits in the smallest workspace of any machine in it’s class and accommodates any automotive and light industrial shaft. We designed the machine to have the maximum clearance for the workpiece and to be rigid while drilling on tough aftermarket crankshafts.

In 2014 T & S stepped up with totally redesigned electronics from the sensors all the way to the computer. We now have, exclusive to T & S, the most revolutionary balancing software in the industry. Just look at the new features available now!

• T&S produces our own electronics in-house, we build our own encoders, sensors, and DAQ boards • Solid-filled base • Smallest footprint in the industry!

• Built-in heavy metal stand on our Deluxe Probal 500 • Balance in 5 identifiable planes!

• T&S takes in simultaneous signals from the most advanced chip design anywhere!

• T&S/Probal/Stewart Warner dates back to the 1950’s, that’s 70 years of balancing experience!

• T&S has the best customer service and best support in the industry – Ask a T&S user!

• T&S challenges any competitor to balance more sensitively or accurately or quickly!

• T&S is the best value in the industry!

Made in U.S.A.

18 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Simple Solutions to Complex Concerns!

PROBAL 500 Deluxe Balancer

Introducing the PROBAL 500 Deluxe Balancer. The new Heavy Metal Drilling Cabinet is built onto the machine so that you no longer have to utilize a separate mill when drilling to add weight.

Our rigid drill press assembly is extended to accommodate drilling over the cabinet, making the process easy.

This machine package will include tooling for heavy metal work on top of our normal automotive tooling. At a price of $20,000, we have maintained the value that you can’t find anywhere else.

Turbo 500 Turbocharger Balancing Attachment Turbochargers can now be balanced on an existing balancer without the need for a separate balancing machine. Designed for the automotive performance shop, the Turbo 500 is mounted on your current balancer with its own drive system and unbalance sensors using the T&S balancing software and interface.

There is no faster system to balance turbocharger rotors.

Versatility with Value

There are many add-ons available. Here is a list of just a few of the upgrade options: • Torque Converter Attachment ***NEW*** • Flywheel Mandrel Set • Expansion Mandrel Set

• Spade Drill Kit • Extended Height Columns • Adjustable Height Column

• Driveline Packages • Vertical Balancer for Flywheels/Discs/Drums • And many more!

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 19

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Save Your Older Balancer from the Scrapyard!

Dana and Tony from Epoch Industries

Archie Frangoudis - Archie’s Racing Service

“I can’t get my balancer processor to come on, do you have a replacement?”

“My left pickup on my balancer won’t read anything, do you have spare parts for this machine?”

“My balancer reads one correction and then on the next spin it reads 300 grams different, what do I do?”

We hear these desperate questions almost every day in our office at T & S Machines and Tools, Inc. Shop owners have built a business that includes crankshaft balancing or they balance industry-specific parts all day long, every day and then suddenly their 35-year-old balancer goes down. We understand the dilemma and we understand the urgency. Time down is money lost.

T & S now offers the PC-5 Electronic Upgrade to meet the cry of those phone calls we get every day. We have been working for the past 5 years on an upgrade system that has been fine-tuned and tested and now includes the same exclusive balancing software sold on our brand new PROBAL 500 Balance System. The PC-5 Electronic Upgrade will update almost any older soft and hard bearing balancers, both automotive and industrial machines.

With the Sensor Mapping feature we can run any machine at any speed within our mapped range. The software is maintained in-house so we can include unique balancing correction analysis for any industrial balance job as well.

20 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

22

www.performancetradermagazine.com

TRADER INT’L MAGAZINE/SPRING 2017

Cobra Stage I Soda Blast Cabinet Cobra Stage I Direct Pressure Soda Blasting Cabinet

ABS Products offers three soda blast models ranked in different stages for different daily machine operation.

This is also known as the machine duty cycle.....

The Cobra Stage I is the smallest cabinet size and it makes a great choice for those small parts requiring soda cleaning.

•1-1/2 hours daily duty cycle suggested •Value for Dollar •13” x 24” ClearView™ Window •Anti-Static Protector Glass •350 CFM Blower •Easy Clean Filters

The Cobra Stage I soda blaster, is a cost effective model if you need a soda blasting cabinet for smaller parts.

Downdraft cabinet airflow, low soda usage with low cfm usage and used soda dropout make Media Blast the leader in soda cabinets.

All ABS Products soda blasters use the all NEW GhostFlowTM soda delivery system with low compressed air usage and patented separator reclaimer. This unique soda dropout system prevents used soda from transferring into the dust collector allowing longer machine operation regardless of dust collector size and blower cfm rating.

ABS Products soda models are available in Stage I, II and III, allowing users to choose the machine that best fits their application needs. Look to the N-200 Soda Stage II unit for larger cabinets with longer daily machine duty cycle, larger dust collectors and higher daily soda delivery. The Blizzard Stage III is the most advanced soda model offered today and the Top of the Line.

MODEL: Cobra Soda Stage I with GhostFlow™ soda delivery technology and used soda drop out system.

Specifications: Inside Cabinet Overall Cabinet Door (2) Soda Delivery Air Usage Electrical Dust Collector Shipping Weight

42”Wx24”Dx26”H 47”Wx37”Dx63”H 20” x 21-3/4”H 0.8 Cu.Ft. 10 CFM 120 Volt-60Hz Poly Cartridge 400 lbs.

•MERV tested filter cartridges •Vibrator Cleaning Cycle •Window Sweeps •8” Work Ports

Low Air Usage •Easy to use Operator Control Panel with GhostFlow™ soda controls •0.8 Cubic Foot Soda Delivery •Manual Pot Loading •Main Air Inlet Shut-Off Valve •Fine Tuning Choke Valve •Stainless Steel Soda Metering Valve •Air Regulator-Gauge-Water Trap •Vibrator Feed with ON-OFF Air Control Switch •Easy to use Full Treadle Blast Pedal

Low Soda Flow •Right and Left Side Access Doors •Operator Work Grates •LED Flood Lighting, 30 Amps •Used Soda Dropout Hopper •Tool-less Window Replacement •10 cfm GhostFlow™ Soda Delivery •Patented Separator Reclaimer

714-671-0728 ABS-Products.com youtube.com/absproducts

•Down Draft Airflow •35-50 pounds Soda Usage Daily

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 23

24 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

ABS Crank Polishers - 3 Sizes This one is going to Midstream Operations in Colorado. How about yours?

• This one polishes crankshafts up to 55” • 2-1/8” belt • Aircraft aluminum drive wheel and idlers • Steady Rest for doing heavier diesel cranks • 5” chucks • Available to handle up to 32”, 42” and 55” center to center See our video at: youtube.com/absproducts

591 W. Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 email: absproducts@sbcglobal.net www.abs-products.com

Now Pressure Testing Is Not Just A Service For Your Customer It Also Makes Good Profit For Your Shop!

Precision surfacing that you can rely on to last many generations. Berco has 90 Never miss aof leak in an aluminum head, block plus years manufacturing quality or up to a 53” long diesel head. machines that last a lifetime!

Quick setup and immersion in heated water Join the thousands of shops that have opens up all leaks for a positive test.

experienced the quality of Berco, but nowrotation at an affordable price.

360º of heavy parts lets you see the exact position of leaks.

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 25

“One call to AERA and my problem was solved.”

Whether you’re a one-man shop or a production engine remanufacturer, to maintain an edge in the engine building industry, you need resources you can depend on. AERA is a specialized network of professional engine builders with the expertise and connections to get you the information you need, when you need it.

With an AERA membership, here are just a few of the benefits you’ll receive: • Toll-free technical support from Master Engine Machinists • PROSIS PRO engine spec software to help make your work easier • Automotive Machining Online Training • Custom Training Programs • Six Specification Manuals and Failure Analysis Manual • Engine Professional magazine filled with highly-technical, application-driven articles • Regional conferences that provide technical presentations and unique shop skill instruction to all who attend Even if just one AERA tech bulletin helps prevent an engine comeback, your membership is well worth its dues.

We’re here to help you make your business the best it can be. Join today! www.aera.org/join

THE SOURCE FOR INFORMATION P ho ne 888-326-2372 or 815- 526- 7600 Fax 8 8 8 -329-2372 or 815-526-7601 • EMAIL info@aera.org

26 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 27

28 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

www.tierratech.com Tremendous water savings

Faster cleaning

TierraTech U.S.A. Draper Business Park 12227 South Business Park Drive, suite 100. Draper, UT Office 801 302 2015 / Cell. 801 244 7126 sales@tierratech.com / www.tierratech.com

Biodegradable detergents

Quietest equipments of the marketplace

JACK SCHOLLER EQUIPMENT • 157 Wedgeway Drive • Statesville, NC 28677 www.jackschollerequipment.com • email: jackschollerequipment@roadrunner.com Cell: 704-906-7980 • Fax: 704-871-0675 • Toll Free: 800-553-1549 Last updated 6/6/17

www.jackschollerequipment.com

The Best Surfacer The Best On The Planet!

Surfacer On The Planet!

Precision surfacing that you can rely on to last many generations. Berco has 90 Precision that youquality can rely on plus yearssurfacing of manufacturing to last many generations.

Berco has 90 machines that last a lifetime! plus years of manufacturing quality machines that last aoflifetime!

Join the thousands shops that have experienced the quality of Berco, but Now at an an affordable affordable price. price you can join now at the thousands of shops that have experienced the quality of Berco.

AUCTION ONLINE ONLY

INDUSTRIAL MACHINE Property Location At: EQUIP. 116 Personal Anna Dr., Statesville, NC 28625 AUCTION BEGINS CLOSING: TUESDAY, JUNE 27, 2017 -­ 3:00PM

PARTIAL INVENTORY LIST -­ VISIT OUR WEBSITE FOR A COMPLETE LIST

- Peterson TCM25 Guide/Seat - Sioux Seat Grinding Cabinet - Storm Vulcan 15A - Sunnen 1299 Rod Hone - Winonna PH6000 Guide/Seat - K-Line Guide Liner Stand - Van Norman 530 Broach - Air Compressors - DCM 6500S Guide/Seat - PMW Spray Cabinet - Wiada Portable Bar - Metal Lathes

IRONHORSEAUCTION.COM TRADER INT’L MAGAZINE/SPRING 2017

910.997.2248 NCAL 3936

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 33 33 www.performancetradermagazine.com

Automotive Bobweights - Model 5097 - up to 3-3/4” Crank Pin, 3300 grams of weight

All of our centerline bobweights to NOT require calibrated nuts, they only require aircraft speed or wing nuts!

V-6 Bobweights

Diesel Bobweights

Mini Bobweights

We now offer: • BW-SN-375 - speed nuts for bob weights, 3/8” aircraft speed nuts • BW-SN-312 - speed nuts for bob weights, 5/16” aircraft speed nuts

Diesel Bobweights - Model BW-7000-D • Up to 3-3/4” Crank Pin • 17-1/4 pounds per journal • Full set is 4 Journals w/ Speednuts $3,400.00

4 Bobweights $2,200.00

NEW! Bobweights For Lightweight V-8’s & Kubota Diesels; 3 cylinder 4-wheeler motors; BSA twin-cylinders; Mercury outboards; Dino Ferraris; Lancia;550 g - 2620 g, 1-3/4” - 3” 5099-L-8K - Includes speed nuts

$2900.00 set $180.00 ea.

$1350.00 set With Speednuts $2,230.00

$1500.00 set

w/ Speednuts $2,700.00

www.abs-products.com

www.abs-products.com

34 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

ABS-Products.com 714-671-0728

Speed Nuts that work!

• Speed up your operation, safer to work with using a hex instead of knurled baloney.

• 5/16” has a 5/8” hex and the 3/8” has a 3/4” hex on it.

• Made from heat-treated 4340 alloy.

• Two models one for 5/16” threads and the other for 3/8” threads.

• Each one takes 45 minutes of machine time on a 5-axis Mazak CNC machine. Made with the same quality as an ABS Stainless Steel Ring Grinder.

• 5/16” are $50.00 ea. and the 3/8” are $60.00 ea.

Bicycle Grip style Crankshaft Polisher • Runs at 30 RPMS • Up to 2” wide cloth belts • Changing belts is a snap Model #4104 - Crankshaft Polisher See above tools and more in action!

www.abs-products.com or www.youtube.com/absproducts

V-10 Lambourgini Bobweights with speednuts, 500 to 1200 grams; .700 wide, 10 sets of journals $4,500.00 714-671-0728 • abs-products.com absproducts@sbcglobal.net youtube.com/absproducts TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 35

Hollow Rams $550.00 HT-6000

Press Ram $200.00 HT-4000

$750.00 HT-6300

Hollow rams with bolts are used for dampener installation, rocker arm pulling.

1.625” Travel

1.625” Travel

3.000” Travel

$250.00 ea.

2.250 14 pitch

2.750 16 pitch

Puller Plates HT-125014

HT-275016

1/2” 7/16” Dampener 5/16” & 3/8” Wrenches for T-wrenches for rocker arm pulling; installation LS7 16mm, 1-1/2 $79 pitch threads; Big Block 16mm, 200 pitch thread; Chinese Eagle Crank 5/8” Coarse thread; Ford 3/4”

www.abs-products.com

ST-LS7 $250.00

Rocker Arm T-Wrench - 4340 chrome moly heat-treated steel w/ rolled threads $200.00 ea.

591 West Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net

36 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

HT 4000 Dampener Puller Kit: 1 ea. HT 4000 RAM .................$200.00 1 ea. HT-125014 Puller Plate ....$250.00 3 ea. 7/8” Plungers .................$150.00 1 ea. Bolt Kit .........................$200.00 Total .....................................$800.00 Pump & Hose .........................$350.00 Complete ........................... $1,150.00

HT 6000 LS7 Dampener Puller Kit: 1 ea. HT-6000 RAM ............... $550.00 1 ea. HT-275916 Puller Plate ... $250.00 3 ea. 3/4” Plungers ............... $150.00 1 ea. Bolt Kit ........................ $200.00 ST-LS7 ................................. $200.00 Total ................................. $1,350.00 Pump & Hose ........................ $350.00 Complete .......................... $1,700.00

Heat treated 4340 chrome only preheat treated. T-wrenches are $200.00, available in either 5/16” or 3/8”.

For 1/4” hose quick disconnect!

Hydraulic Stud Puller Kit: HT-6000 RAM ............$550.00 3/8” T-Wrench ...........$200.00 5/16” T-Wrench .........$200.00 Total ........................$950.00 Pump & Hose ............$350.00 Complete .............. $1,300.00

For 3/8” hydraulic hose quick disconnect!

TRADER INT’L MAGAZINE/FALL 2015

714-671-0728 • absproducts@sbcglobal.net abs-products.com • youtube.com/absproducts Custom Tools for Performance & Rebuilder Shops 29 www.performancetradermagazine.com

$7,900

.00 Pollution Control Workstations ABS-PL4736-E

enclosed top that swings up out of the way for loading, swings down to keep particle out of shop, single motor on the back, 3/4 HP @ 750 cfm. Move up to 2 HP motor and get 1250 cfm.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products.

This machine is a must in today’s market where you are working with that you have to keep out of your lungs.

ions See more Pollution Control Workstat & many other products: www.youtube.com/absproducts

591 W. Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net abs-products.com

38 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

Downdraft Tables with Turntables We are delivering 3 new Downdraft Tables with Turntables are going to LKQ/Amada of Texas for blowing off blocks and deburring parts.

Downdraft 36’ turntable, 2 HP, 2,000 CFM for blowing off parts, 440 sq. ft. of fire retardant air filters, non-scratch plexiglass, new-style metal frame.

These machines are $14,500.00 each Call and order your custom solution today and get back to WORK.

Domestic, Japanese and European

714-671-0728

www.americangasket.biz

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 39

Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders!

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in. They are stripped down to remove paint and magnafluxed, Gary’s shop does it all.

He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers.

Shot peening, plastic media, glass bead, all runs through this versatile production quality machine.

If you run a large production shop like Gary’s we have the custom blasting machines you need. This makes an EXCELLENT shop peening cabinet for diesel cranks or anything!!!

714-671-0728 absproducts@sbcglobal.net abs-products.com youtube.com/absproducts Tools for Performance Racing Engine Builders

40 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

Excellent maching for shot peening cranks! In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

video See the ube! on Yout

Nozzles for shot peening, blasting & plastic media!

ABS Valve Stem Polisher VSP-1 & VSP-2 (diesel) The ABS Valve Stem Polisher allows you to: • Micro polish valve stems in seconds • See your work clearly • You, the engine builder, to micro-polish the entire stem of the keeper area

See the video www.abs-products.com

• A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle Each nozzle is $250.00 Full set is $1250.00

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 41

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized and your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect) .................................. $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

591 West Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net www.abs-products.com

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

42 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

System on Best Storage the market!

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00 For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

(714) 671-0728 absproducts@sbcglobal.net abs-products.com youtube.com/absproducts/

Tools, equipment, machines for engine builders & rebuilders

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect) - $149.00

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Call 714-671-0728 • ABS-Products.com www.abs-products.com

Drilling Platforms for Hines & Winona Balancers

591 W. Apollo St. • Brea, CA 92621 Phone: (714) 671-0728 Fax: (714) 671-0836 absproducts@sbcglobal.net TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 43

44 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

Purpose-built Custom Machines by ABS Products

20-Cylinder Crankshaft Polisher

We specialize in custom, purpose-built production machines!

This is a 20-cylinder crankshaft polisher is being built to use 5-7/8” x 77” belts, mounted on a polish lathe.

This crankshaft polisher is now available for sale to YOU! Call 714-671-0728 for details.

This photo shows a 3520 Catepillar V-20 crank. The crankshaft with counterweights weight 2950 lbs. and is 10’ 7” between centers. have a need for your shop give us a call and let us build you a purpose-built custom machine for you. *Bolt-on polishing kits available for YOUR lathe!

591 West Apollo Street, Brea, CA. 92821 (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net abs-products.com • youtube.com/absproducts

46 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 47

GARAGE AND SHOP your ORGANIZERS Update Piston Ring Grinder to an ABS Ring Grinder!

The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE AEROSOL CAN RACK Capacty: 12 cans

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2006W 2006R 2006B

2008W 2008R 2008B

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk New Scotch Brite Buffing Wheel RG-5953 ---- $10.50 ea.

Micron Disk, 1 - 4” Turntable - $1,455.00 New Felt Buffing/Deburring Wheel RG-5952 --$14.75 ea.

Micron Disk, 1 - 5” Turntable - $1,555.00 New Stick-On Disks RG-5956 ---------------- 10 for $50.00 Micron Disk, 1 - 6” Turntable - $1,655.00 12 pack of Micron Disks --------------------------------- $19.25 SMALL OIL BOTTLE SHELF LARGE OIL BOTTLE SHELF Diamond Borzon Disk - $325.00 COMBINATION STORAGE Capacty: (6)or 1 QUART BOTTLES Capacty: (12) 1 QUART BOTTLES 50 pack of Micron Disks ------------------------------$65.00 LOCKABLE ORGANIZER WITH 2010W 2010R 2010B

2014W 2014R 2014B

SHELVES

2016W 2016R 2016B

STORAGE SHELF

ABS Products • 714-671-0728 ABS-Products.com • youtube.com/absproducts

2022W 2022R 2022B

PHONE: (714)255-0526 •TRADER FAX:MAGAZINE/SUMMER (714) 257-0184 2017 www.trader-mag.com

49

GARAGE AND SHOP ORGANIZERS The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL OIL BOTTLE SHELF Capacty: (6) 1 QUART BOTTLES

2010W 2010R 2010B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE OIL BOTTLE SHELF Capacty: (12) 1 QUART BOTTLES

2014W 2014R 2014B

LARGE AEROSOL CAN RACK Capacty: 12 cans

2006W 2006R 2006B

COMBINATION STORAGE SHELVES

2016W 2016R 2016B

PHONE: (714)255-0526 • FAX: (714) 257-0184

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2008W 2008R 2008B

LOCKABLE ORGANIZER WITH STORAGE SHELF

2022W 2022R 2022B

TOOL BOX

R103

TOOL BOX

HR19

TOOL BOX

R1182-02 R1182-03

PIONEER STEEL CO.

sales@pioneersteelusa.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 51

Advertisers Index ABS PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT’S IN THERE ABRO BALANCING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29 ACCESS INDUSTRIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AERA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 AIR & POWER TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 AMERICAN GASKET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ARMEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 BAKER EQUIPMENT SALES. . . . . . . . . . . . . . . . . . . . . . . . . . 15,24,25,33 CLASSIFIEDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 CODER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 CWT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 DAKOTA PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DELTA CUSTOM TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 DNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 FARRIS EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FERREA VALVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 INNOVATIVE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 INXPRESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

IRON HORSE AUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 IRONTITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 JAMISON EQUIPMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 K & S REGRINDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 KWIKWAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 MEDIA BLAST & ABRASIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45 NEWEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,9 PIONEER STEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51 QUALITY CUTTER GRINDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 REVCO PRECISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ROTTLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82,83,84 SCHOLLER SHOP EQUIPMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 T & S MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20 TIERRA TECH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 TRADER MAGAZINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53 TURNER TECHNOLOGY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ULTRASONIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 WINONA VAN NORMAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-71 THIS INDEX IS PROVIDED AS SERVICE. THE PUBLISHER DOES NOT ASSUME LIABILITY FOR OMMISIONS OR ERRORS.

CLASSIFIEDS Hines balancer for SALE it has v8/v6 bob weights, the ABS checking weights worked fine just up graded --have video running-- Call Rick 702-644-2220 Vegas

2 Sunnen Dial bore gauges (long .001) both are in nice condition, calibrated and in original case $500 each 2 Dial bore gauge setting fixtures nice condition in the original box. $500 each Rimac spring tester 250lb $150

Full Time Position for a Crankshaft Grinder Operator

2 Ammco 4000 brake lathes fully tooled $1800 each or $2100 with a quick chuck

All custom work Must have 3 year’s experience on a crankshaft grinder. Must have experience on rough grinding and finish grinding crank shafts Must speak English Compensation: DOE

Sioux small parts tumbler $1000

We manufacture, repair and modify high performance racing crankshafts. Fast pace growing company.

Duties: Must be able to operate a “Crankshaft” Grinder Must have knowledge of crankshafts Must be able to work with minimal supervision Meet production schedules Must be detailed and organized Must be able to lift 75lbs.

We offer Benefits: Benefits include, vacation, sick, health and dental This is a very challenging and rewarding job for the right person. We offer a clean, safe and pleasant working environment Please call Marine Crankshaft at 714-549-2388 Regards, David Eden Marine Crankshaft Inc. (P) 714-549-2388(F) 714-549-1382 Email- cacranks@yahoo.com 2155 So. Grand Ave Santa Ana, CA 92705

Parts tumbler older ugly unknown brand but works well $500 60 ton Manley hydraulic-press. very large press with large arbor press on 1 end $2000 Sioux 2075 valve grinder with base cabinet $750 Kwik-Way FL Boring bar with adjustable stand fully tooled with original tool box and manual 120v. $4000 Sunnen 1699 rod hone with gauge fully tooled very nice machine from a 1 man shop looks new 120v. $3500 Sunnen CRG-750 cap and rod cutter $750 Sioux 645 valve grinder $350 Serv-Equip. wet cylinder hone with friction feed head, uses AN stones includes long Sunnen dial bore gauge a nice selection of new and used stones 120v. $4500 Peterson TCM 25 very nice machine with air float fixture includes some tooling 3ph. $2000 Am-pro PT-100 pressure tester with lots of plates, little rusty but works good $500 2 Kansas Instruments jet wash cabinets with roll out basket both work great 3ph. $1800 each 2 small hot tanks aprox. 40 gallon both work good 120v. $500 each Kwik-Way RM-100 pin fit machine. old and has some issues not sure if it works but was told it did. $250?

2 Sioux wet/dry valve grinding benches with tool holders, head holding fixtures and a stone dresser. not sure what there worth if anything, make offer Wayne 5 HP stand up air compressor 3hp. $500 Nick Redenbaugh 209-595-0767 nick@209toyota1.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 53

54 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

• 60” x 60” steel shot blaster with very fine .007 shot • 10 ft. track and dolly with a 48” turntable • Double doors • For SRC/Kamatsu Diesel, an ABS Products customer for over 20 years; Mike Ryan - Energy Dynamics; Rex Crumpton - Memorial Machine

Call the factory direct!

www.abs-products.com

591 W. Apollo St. • Brea, CA 92821 Phone: (714) 671-0728 Fax: (714) 671-0836 absproducts@sbcglobal.net www.abs-products.com

Chanel

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 55

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 714-671-0728 5. Easy abs-products.com

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 ONLY press design for the Balancing Shops!

VT-2500-4500-F The 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting Press............$21.80 in Heavy Metal, Remove/Install Dampeners and Cam Gears VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting Press......................$21.80 Fixtures: for removing crank and dampeners and VT-3000-4000 3”x 3” pad without fitting gears ......................$21.80 assorted extensions. Free floor saver VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 included with your order!

VT-3000-4000 3”x 4” pad without fitting ......................$22.80 Has ten inches of travel on the ram, VT-6000-6000 6”x 6” pad without fitting ......................$24.95 levels to hold crankshafts, lower VT-3-TP 11”x 35” table pad fortwo VT-3 ...................$62.95 level will accomodate Sunnen Pin VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 Press fixtures VT-SP-14 14 mm spark plug adapter ....................$39.00 the full video at VT-SP-18 18 mm spark plug adapterSee ....................$49.00 www.abs-products.com!

VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 0728 GA-LG Liquid filled gauge .................................$80.00 -6714 1 7 ALL VT-3-H 1/4” vacuum hose ..................................$39.00 ALK! C T S ’ T VT-RV Release valveE..........................................$42.00 D! LE OCK .........................................$10.00 T S VT-TA Table adapter R E OV VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 591 W. Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 VT-3-P 3 CFM pump .........................................................$328.98 email:absproducts@sbcglobal.net www.abs-products.com VT-5-P 5 CFM pump ........................................$475.00

Our 10 Ton Press!

Bob Weight Cards comes in a pad of 100 on card stock with perforations - Part #BW-5099C $30.00

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 57

Dirty Part/Cleaned Part *cleaned in less than 5 minutes!

Dirty Part/Cleaned Part *cleaned in less than 5 minutes!

58 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

36” x 36” Shot Peener w/ track

ABS Products Dual Shot Peener - N440 • • • • • • • •

36” x 36” shot peener with track and turntable designed to be moved by forklift, run on 110V, be portable 10” arm holes large window rubber lined interior lighting top of the line!

Small step available!

The best $27,500 you could ever spend!

We make these up to 60” x 60” and larger! Call us for your custom shop needs!

714-671-0728 • www.abs-products.com youtube.com/absproducts TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 59

Buy it Right the First Time

If you want a blast cabinet that doesn’t leak dust, has visibility so good you can actually see what your blasting, cleans parts faster than any blast cabinet on the market and requires virtually no maintenance: then ABS Products has exactly what your looking for.

For high production or unique applications, we offer a variety of system upgrades and sizes that will keep your blast cabinet running great day after day.

Running Out of Room?

Our New 3636 Power Peen takes up 1/3 less floor space and is more reliable and easier to service than ever.

ABS Products 3636 Power Peen Blast Cabinet System Water Separators Soft Whip Hose Wear Plates Turn Table

Larger Capacity Dust Collectors Blower Exhaust Silencer Pot Blow-Down Controls Manual Pulse Air

*Other size cabinets available 591 West Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net

New! Piston Balancing Cutter

Screw on head available in 1/2 & 1/4” width ABS Products 714-671-0728 www.abs-products.com

We still have a two-flute head. People like it because its cheaper. It’s solid, all one piece, the head does not come off.

62 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 63

Wisdom From From Gary Gary Wisdom

BecauseasasGary Garyalways alwayssaid said Because “There’smy myway wayororthe thewrong wrongway” way” “There’s

As Gary demonstrates in his original video showing his ABS Ring Grinder “This is our old stand by, it’s dead square and you only take it off one side and you’re done” as he puts the ring on the table, clamps it down and removes the excess metal for the perfect gap. Our adjustable tables “have all this usage” allowing you to use the whole wheel or disc instead New ofNew a excluSive fixexcluSive mount that wears the abrasive inANd only one liceNSe MANufAcTuRe ANdSell Sell liceNSe TOTO MANufAcTuRe location.

ORigiNAlKwiK-wAy KwiK-wAyBORiNg BORiNgBAR BARPARTS PARTS ORigiNAl

Convertany anyexisting existingglass glass Convert beadcabinet cabinetinto intoaasoda soda bead cabinet. cabinet. $4,000.00for forsoft softmedia media $4,000.00 suchas assoda. soda. such $5,000.00for forhard hardmedia, media, $5,000.00 finalprice. price.Call CallABS ABSProdProdfinal Garyucts Thompson Founder ucts714-671-0728 714-671-0728for forpricpricof ABS Products ing and details ing and details

There are many types of rings so we offer multiple abraPReciSiON BuilT iN The uSA PReciSiON The uSA sives Diamond wheel, Micron disc and HDBuilT disciN“We have ORigiNAl KwiK-wAy SPecificATiONS TOTO ORigiNAl KwiK-wAy SPecificATiONS the DC motor so that you can adjust it to the metal because everything takes a different speed, that’s why we get a 214707-0984 214707-0984 beautiful cut and don’t get the heat, you can get steel or Feed feed nuts, bevel gears, belts, Feed screws, feed nuts, bevel gears, belts, anything you want to doclutches, and itscrews, don’t turn blue” clutches, driveshafts, tool holders, centering driveshafts, tool holders, centering fingers, micrometers, MORE fingers, micrometers, MORE Because rings come in varied sizes we offerand 3and stainless iN-STOcK iN-STOcK steel tables “so give us a call… we cover all of you guys • FN • FL • FL motorcycle, aircraft, compressors• FN • FW • FWS-II • FW • FWS-II anything out there”.

Gary spent a lot of time inventing See OuR OfficiAl See OuR OfficiAl ways to make your jobANNOuNceMeNT easier, faster ANNOuNceMeNT The ONON The KwiK-wAy weBSiTe! KwiK-wAy weBSiTe! and more reliable for more of his wisdom check out our YouTube channel @ABSProducts.com

New New OeMPARTS PARTS OeM

Servingthe theEngine EngineRebuilding RebuildingIndustry Industrysince since1975 1975 Serving

Gary’slegacy legacywill willcontinue continue sharing with youhis hishelpful helpfultips tips ineach eachissue. issue.

Gary’s byby sharing you Craig Coder |coder3@sbcglobal.net coder3@sbcglobal.net |214-707-0984 214-707-0984 Craig Coder | with | in

Duramax++ Duramax HeavyMetal!

Metal!

Heavy

Internallybalanced balancedDuramax Duramax Internally photo: CalDiesel Diesel photo: Cal Crankshaft with1-1/4”, 1-1/4”, 1-3/8” Crankshaft with 1-3/8” and1-1/2” 1-1/2”heavy heavymetal! metal! and

Duramax++ Duramax Thisisiswhat what $3,000proppropThis a a$3,000 Heavy Metal!

Heavy Metal!

erly balanced deisel crankshaft

org g

erly balanced deisel crankshaft Internally balancedDuramax Duramax Internally balanced shouldlook looklike! like! should Crankshaftwith with1/1/4”, 1/1/4”,1-3/8” 1-3/8” Crankshaft and 1-1/2” heavy metal! and 1-1/2” heavy metal!714-671CallABS ABSProducts Products 714-671Call 0728for forpricing pricingand anddetails details 0728

Thisisiswhat whataa$3,000 $3,000proppropThis erlybalanced balanced diesel crankshaft erly diesel crankshaft TRADER INT’L MAGAZINE/WINTER 2015 TRADER INT’L MAGAZINE/WINTER TRADER INT’L MAGAZINE/WINTER 2015 TRADER INT’L MAGAZINE/FALL 20152015 TRADER INT’L MAGAZINE/WINTER 2015 TRADER INT’L MAGAZINE/FALL 2015 should look like! should look like!

18/15 5:23 15 5:23 PMPM 10/27/15 1:46 10/27/15 1:46 PMPM

Dampener Weights and Weld-In Steel Plugs Dampener Weights and Weld-In Steel Plugs 5/16” and 3/8” 5/16” and 3/8” BS-4019 Clutch Dampener Weights BS-4019 Clutch && Dampener Weights BS-4020 Clutch Dampener Weights BS-4020 Clutch && Dampener Weights BS-4021 Clutch Dampener Weights BS-4021 Clutch && Dampener Weights BS-4022 Clutch Dampener Weights BS-4022 Clutch && Dampener Weights BS-4023 Clutch Dampener Weights BS-4023 Clutch && Dampener Weights BS-4024 Clutch Dampener Weights BS-4024 Clutch && Dampener Weights

.312” x 1.250” 25/pkg. .312” x 1.250” 25/pkg. .375” x 1.500” 25/pkg. .375” x 1.500” 25/pkg. .250” x .750” 25/pkg. .250” x .750” 25/pkg. .375” x .750”25/pkg. .375” x .750”25/pkg. .312” x .500” 25/pkg. .312” x .500” 25/pkg. .312” x .875” 25/pkg. .312” x .875” 25/pkg.

BS-4025Steel Steel Plug Weld-In .750” x .250” 25/pkg.

BS-4025 Plug Weld-In .750” x .250” 25/pkg.

BS-4026 Steel Plug Weld-In .825” x .250” 25/pkg.

BS-4026 Steel Plug Weld-In .825” x .250” 25/pkg.

BS-4027 Steel Plug Weld-In 1.000” x .250” 25/pkg.

BS-4027 Steel Plug Weld-In 1.000” x .250” 25/pkg. www.enginebuilderdirectory.com www.enginebuilderdirectory.com www.enginebuilderdirectory.com www.enginebuilderdirectory.com

$37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50

$37.50 $37.50 $37.50 $37.50 $37.50 $37.50 49 5757

www.enginebuilderdirectory.com 49 www.enginebuilderdirectory.com ABS-Products.com 714-671-0728 ABS-Products.com ••714-671-0728

64 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ------------$495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 ----------------------$225.00 Pointer ------------------------------------------- $60.00 ABS Products • (714) 671-0728 • abs-products.com

NEW! Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

591 W. Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 email: absproducts@sbcglobal.net www.abs-products.com TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 65

66 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 67

68 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 71

40” Polisher on a Downdraft Table

60” wide x 36” deep downdraft table, 40” polisher, 20 gallon air tank with pushbutton manual pulse air to clean the -

onds.

www.abs-products.com

591 West Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net

72 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 73

ABS Products • 714-671-0728 • www.abs-products.com

Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-437-875

Heavy Metal 7/16" x 7/8" Dowel Pins

$23.18

$20.97

$19.53

$18.14

$16.80

HM-437-1100

Heavy Metal 7/16" x 1.100" Dowel Pins

$25.84

$23.40

$21.97

$20.58

$19.17

HM-500-500

Heavy Metal 1/2" x .500"

$10.05

$9.02

$8.30

$7.73

$7.27

HM-500-750

Heavy Metal 1/2" x .750"

$16.49

$14.54

$13.61

$12.45

$11.32

HM-500-830

Heavy Metal 1/2" x .830"

$18.14

$15.84

$14.83

$13.56

$12.32

HM-500-850

Heavy Metal 1/2" x .850"

$18.45

$16.63

$15.56

$14.25

$12.94

HM-500-900

Heavy Metal 1/2" x .900"

$19.07

$17.24

$16.17

$14.95

$13.59

HM-500-950

Heavy Metal 1/2" x .950"

$19.68

$17.63

$16.56

$15.34

$13.97

HM-500-1000

Heavy Metal 1/2" x 1.000"

$20.10

$18.05

$16.61

$15.47

$14.53

HM-500-1100

Heavy Metal 1/2" x 1.100"

$22.33

$20.11

$18.69

$17.00

$15.67

HM-500-1200

Heavy Metal 1/2" x 1.200"

$24.13

$21.81

$20.36

$18.27

$16.57

HM-500-1250

Heavy Metal 1/2" x 1.250"

$25.44

$22.82

$21.13

$19.52

$18.33

HM-625-750

Heavy Metal 5/8" x .750

$21.95

$19.02

$17.10

$15.30

$13.94

HM-625-1000

Heavy Metal 5/8" x 1.000"

$28.93

$25.96

$24.04

$22.23

$20.88

HM-625-1100

Heavy Metal 5/8" x 1.100"

$33.10

$28.96

$26.91

$24.88

$23.19

HM-625-1200

Heavy Metal 5/8" x 1.200"

$35.25

$31.66

$29.31

$27.16

$25.12

HM-625-1250

Heavy Metal 5/8" x 1.250"

$36.16

$32.46

$30.03

$27.74

$26.09

HM-750-750

Heavy Metal 3/4" x .750"

$28.90

$27.42

$25.92

$24.46

$22.96

HM-750-800

Heavy Metal 3/4" x .800

$29.97

$28.49

$26.99

$25.53

$24.03

HM-750-1000

Heavy Metal 3/4" x 1.000"

$31.39

$30.37

$29.58

$25.08

$25.97

HM-750-1100

Heavy Metal 3/4" x 1.100"

$33.85

$30.73

$32.06

$31.06

$28.38

HM-750-1200

Heavy Metal 3/4" x 1.200"

$36.09

$34.96

$33.85

$32.72

$30.32

HM-750-1250

Heavy Metal 3/4" x 1.250"

$38.80

$37.33

$35.83

$34.36

$32.87

HM-875-500

Heavy Metal 7/8" x .500"

$19.62

$18.84

$18.27

$17.15

$16.13

HM-875-700

Heavy Metal 7/8" x .700"

$26.80

$26.15

$25.25

$23.89

$22.79

HM-875-750

Heavy Metal 7/8" x .750"

$27.95

$26.87

$26.07

$25.17

$24.33

HM-875-800

Heavy Metal 7/8" x .800"

$33.70

$30.32

$29.52

$28.62

$27.77

HM-875-1000

Heavy Metal 7/8" x 1.000"

$35.75

$32.23

$29.99

$28.69

$27.79

HM-875-1100

Heavy Metal 7/8" x 1.100"

$38.83

$35.25

$33.03

$31.15

$30.25

HM-875-1200

Heavy Metal 7/8" x 1.200"

$41.25

$37.66

$34.22

$33.52

$31.72

HM-875-1250

Heavy Metal 7/8" x 1.250"

$45.52

$40.85

$37.81

$34.96

$33.61

HM-1000-500

Heavy Metal 1" x .500"

$20.00

$19.59

$18.84

$18.19

$17.64

HM-1000-700

Heavy Metal 1" x .700"

$28.23

$27.42

$26.63

$25.57

$24.71

HM-1000-750

Heavy Metal 1" x .750"

$30.02

$29.81

$28.23

$27.37

$26.49

HM-1000-800

Heavy Metal 1" x .800

$32.61

$31.99

$30.42

$29.54

$28.67

HM-1000-825

Heavy Metal 1" x .825"

$33.08

$32.61

$31.30

$30.43

$29.55

HM-1000-880

Heavy Metal 1" x .880"

$35.18

$34.45

$33.12

$32.14

$31.07

HM-1000-1000

Heavy Metal 1" x 1.000"

$40.01

$39.15

$37.66

$37.55

$35.32

HM-1000-1100

Heavy Metal 1" x 1.100"

$42.26

$41.60

$40.43

$38.40

$36.60

HM-1000-1200

Heavy Metal 1" x 1.200"

$43.64

$42.59

$41.07

$39.80

$38.52

HM-1000-1250

Heavy Metal 1" x 1.250"

$46.72

$44.92

$43.13

$41.40

$40.66

74 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

ABS Products • 714-671-0728 • www.abs-products.com

We stay stocked up!

is ad for Mention th count! n price dis m lu o c t x e n

We will cut weld chamfers upon request.

Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-1000-1260

Heavy Metal 1" x 1.260"

$47.32

$45.53

$43.42

$41.69

$40.94

HM-1125-760

Heavy Metal 1 1/8" x .760"

$56.84

$55.75

$54.66

$53.56

$52.47

HM-1125-800

Heavy Metal 1 1/8" x .800"

$57.90

$56.81

$55.72

$54.62

$53.51

HM-1125-1000

Heavy Metal 1 1/8" x 1.000"

$58.92

$57.83

$56.75

$55.64

$54.53

HM-1125-1100

Heavy Metal 1 1/8" x 1.100"

$60.66

$59.50

$58.35

$57.25

$56.08

HM-1125-1200

Heavy Metal 1 1/8" x 1.200"

$62.39

$61.22

$60.08

$58.92

$57.75

HM-1125-1250

Heavy Metal 1 1/8" x 1.250"

$64.71

$63.99

$62.32

$61.11

$59.96

HM-1125-1260

Heavy Metal 1 1/8" x 1.260"

$65.56

$64.86

$63.18

$61.98

$60.77

HM-1125-1850

Heavy Metal 1 1/8" x 1.850

$75.68

$72.97

$71.29

$70.08

$68.88

HM-1250-1000

Heavy Metal 1 1/4" x 1.000"

$67.53

$66.32

$64.97

$63.83

$62.57

HM-1250-1100

Heavy Metal 1 1/4" x 1.100"

$69.89

$68.67

$67.32

$66.18

$64.91

HM-1250-1200

Heavy Metal 1 1/4" x 1.200"

$72.24

$70.89

$69.36

$68.20

$66.88

HM-1250-1250

Heavy Metal 1 1/4" x 1.250"

$74.55

$73.18

$71.77

$70.40

$69.04

HM-1375-500

Heavy Metal 1 3/8" x .500"

$67.37

$66.01

$64.60

$63.23

$61.89

HM-1375-750

Heavy Metal 1 3/8" x .750"

$77.18

$75.76

$74.34

$72.92

$71.67

HM-1375-1000

Heavy Metal 1 3/8" x 1.000"

$81.56

$80.00

$78.55

$77.00

$75.28

HM-1375-1200

Heavy Metal 1 3/8" x 1.200"

$83.86

$82.34

$80.73

$79.22

$77.67

HM-1375-1250

Heavy Metal 1 3/8" x 1.250"

$86.18

$84.72

$83.58

$81.42

$80.06

HM-1500-1000

Heavy Metal 1 1/2" x 1"

$118.48

$116.91

$115.47

$113.92

$112.20

HM-1500-1250

Heavy Metal 1 1/2" x 1250"

$122.30

$120.73

$119.28

$117.73

$115.89

HEAVY METAL BARS are sold by the inch in length Item

Description

Price/Inch 1”W x 12”L

HM-312-4500

Heavy Metal Bars 5/16”H x 4-1/2"L

$25.00/Inch

$112.50

HM-375-6000

Heavy Metal Bars 3/8”H x 6"L

$25.00/Inch

$150.00

HM-437-4000

Heavy Metal Bars 7/16”H x 4"L

$25.00/Inch

$100.00

Item HM-500-12000

Description Heavy Metal Bars 1/2" H x 12" L

Price/Inch 1”W x 12”L $20.10/Inch $241.20

HM-625-12000 HM-750-12000

Heavy Metal Bars 5/8" H x 12" L

$28.93/Inch

$347.16

Heavy Metal Bars 3/4" H x 12" L

$31.39/Inch

$376.68

HM-875-12000

Heavy Metal Bars 7/8" H x 12" L

$35.75/Inch

$411.12

HM-1000-12000

Heavy Metal Bars 1" H x 12" L

$40.01/Inch

$480.12

HM-1125-12000

Heavy Metal Bars 1-1/8" H x 12” L

$58.92/Inch

$621.46

HM-1250-12000

Heavy Metal Bars 1-1/4" H x 17” L

$67.53/Inch

$810.36

HM-1375-12000

Heavy Metal Bars 1-3/8" H x 12" L

$81.56/Inch

$978.72

HM-1500-8000

Heavy Metal Bars 1-1/2" H x 12" L

$118.48/Inch $1,421.76 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 75

The Ultimate Piston Fixtures Jaws can be sold seperately for any ring width: 3/16” down to .5 mm!

10” Tilting Rotary Table with 8” Chuck & special Piston Jaws

Standard ABS Piston Fixture

Jaws available for 6” & 8” chucks.

591 West Apollo Street, Brea, CA. 92821 (714) 671-0728, fax (714) 671-0836 absproducts@sbcglobal.net abs-products.com youtube.com/absproducts

See the video: YouTube.com/absproducts

Special Chuck for Machining Sleeves

Special Diesel Jaws for 6”& 8” Chuck

IMPORT TUNERS & MOTORCYCLE BUILDERS: we have many new jaws for small bore motors!!!

7-1/2” Blank Piston Fixture Jaw: we machine this to fit YOUR ring groove! Or you can purchase blanks and machine yourself. Available for 6” and 8” chucks as well. www.performancetradermagazine.com

76 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

ABS Products

The Worlds Largest Inventory of Heavy Metal for Balancing Crankshafts Finished Pieces

“You Can Be The Best if You Buy From ABS” Bar Stock

Flat Plate Heavy Metal Chassis Weights 2-5/8”W x 5-3/8”L x either .140 and .240 Thicknesses; Stackable to bolt on for balancing chassis on Indy cars, stock cars, NASCAR, dragsters ballasts. .140 = 480 grams; .240 = 980 grams Round Bar Stock - 2”D x 2”L & 2”D x 3”L for making your own slugs or chassis balancing.

Round Bar Stock 15”L x 1-1/8”D, 1-1/2”D or 1-3/8”D cut your own crankshaft slugs. Call 714-671-0728

591 W. Apollo Street, Brea, CA. 92821 ph (714) 671-0728, fax (714) 671-0836 email: absproducts@sbcglobal.net www.abs-products.com TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 77

Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need Heavy Metal Tungsten Checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. Our checking weights fit securely between crankshaft counterweights allowing the exact simulation of heavy metal. Get it right the first time everytime! Available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing & Balancing with Heavy Metal”

.00 0 $3,15

Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed.

591 West Apollo Street, Brea, CA. 92821

Heavy Metal Start-Up Kit comes with: (714) 671-0728, fax (714) 671-0836 (10) 1” x 1.200” pieces of heavy metal and (8) checking weights absproducts@sbcglobal.net (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights abs-products.com • youtube.com/absproducts (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

78 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

Call for availability 714-671-0728

Heavy Metal Available Sizes

Dia. x Length Tungsten

7/16” x .875” 1/2” x .750” 1/2” x 1.000” 1/2” x 1.200” 1/2” x 1.250” 5/8” x 1.000” 5/8” x 1.200” 5/8” x 1.250” 3/4” x 1.000” 3/4” x 1.200” 3/4” x 1.250” 7/8” x .500” 7/8” x . 700” 7/8” x .750” 7/8” x 1.000” 7/8” x 1.100” 7/8” x 1.200” 7/8” x 1.250” 1” x .500” 1” x . 700” 1” x .750” 1” x .850” 1” x 1.000” 1” x 1.100” 1” x 1.200” 1” x 1.250” 1-1/8” x 1.000 1-1/8” x 1.200 1-1/8” x 1.250 1-1/4” x 1.000 1-1/4” x 1.200 1-1/4” x 1.250 1-3/8” x .750 1-3/8” x 1.250 1-1/2” x .600 1-1/2” x 1.000 1-1/2” x 1.250

38 43 57 65 72 91 109 114 122 147 162 87 117 127 169 186 198 210 111 153 164 190 227 243 265 275 282 325 350 346 418 445 328 543 304 504 635

Steel

17 19 25 30 31 39 47 49 56 67 70 38 54 58 77 85 92 96 50 70 75 85 100 110 120 125 127 153 160 157 189 196 142 237 135 226 283

Net Gain

21 24 32 35 41 52 62 65 66 80 92 48 63 70 92 101 105 114 61 83 89 102 127 133 145 150 155 172 190 189 229 249 186 306 169 278 352

BARSTOCK:Available in 1/2”, 5/8”, 3/4”, 7/8” 1”, 1-1/8”, 1-1/4” & 1-3/8” Diameters TRADER INT’L MAGAZINE/FALL 2015

www.performancetradermagazine.com

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 79

39

Is Non-Destructive Cleaning Critical?

ARMEX Is The Only Choice When cleaning parts that cannot have the specifications or surface tolerances change, the only blasting abrasive to use is ARMEX. Other hard blasting abrasives can remove surface materials, damage threads and change the specifications along with surface tolerances rendering the parts unusable.

The gentle physical propriety of baking soda but yet aggressive cleaning ability is what makes ARMEX the only choice. ARMEX is environmentallyfriendly and soluble. It can dissolve in water, oil, antifreeze and transmission fluid. Because ARMEX is soluble it will never leave blasting particles behind in critical or hidden passageways like other hard blasting abrasives which can increases the risk of parts failure when placed back into service.

Use ARMEX to clean, de-grease, remove burnt on carbon and paint on a wide variety of materials including steel, aluminum, lead, alloys, plastics, rubber and composites.

Before

After

Before

After

ARMEX for When Non-Destructive Cleaning is Critical.

Learn more at www.armex.com

Before & After

www.performancetradermagazine.com ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

80 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

2017

HOUSE

Thursday, Sept 28 9:00am – 4:00pm Technical seminars with AERA

Friday, Sept 29 9:00am – 3:30pm Technical seminars with AERA

plete A com Rottler of array ines will h mac up for be set ion and ct instru stration n demo

Welcome Dinner at Rottler 5:00pm on the 28th Thank You Dinner at the LeMay Car Museum on the 29th Shuttle bus leaves Rottler at 4:00pm for dinner

RSVP at www.rottlermfg.com/openhouse or call 253-872-7050

www.rottlermfg.com www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

8029 South 200th Street Kent, WA 98032 USA +1 253 872 7050

THE CUTTING EDGE

82 TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com

1-800-452-0534

SUMMER SALE

Up to $8,700 savings!

Call to find out how!

Take Care of the Big Heads

controls d e e f n w o D Automatic tting functions all seat cu

The Speed of Live and the Accuracy of Fixed Time is money….

How fast do you want to go?

Call our team of engineers for the best solution!

for

d fast sea simple an

t cutting

Rottler’s leadership in the heavy duty arena has earned a reputation among OEM remanufacturers and large engine rebuilders worldwide. Let us show you how over 90 years of experience and innovative product development can help you move beyond your current level of expertise. The versatility of our machinery can be an ingredient for your success.

Rottler’s SG80 Heavy Duty Cylinder Head Machines can handle all necessary machining operations on the biggest diesel and natural gas engines – facing multi angle valve seats, boring housings for oversize valve seats, reaming semi-finished valve guides with carbide reamers, machining injector tubes, drilling broken bolts and tapping threads and much more. The SG80 machines are designed to cut all valve seats to equal depth with reference to the head gasket fire deck surface giving balanced compression.

The SG80 features (as standard) a heavy duty 360 degree roll over fixture allowing large heads such as Detroit S60 and DD15, CAT3406E/C32 and Cummins ISX to be rolled over for machine work on all faces of the heads.

Rottler’s patent pending UNIPILOT TOOLING system allows the carbide centralizing UNIPILOT to work like a live pilot – stays in the spindle while moving from valve guide to valve guide – but at the same time works like a fixed pilot to give improved CONCEN.

www.rottlermfg.com www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

8029 South 200th Street Kent, WA 98032 USA +1 253 872 7050

THE CUTTING EDGE

1-800-452-0534

TRADER MAGAZINE/SUMMER 2017 www.trader-mag.com 83

CNC Automatic Vertical Honing Machines Today’s high performance piston rings require precise surface finishes, for reduced friction and a perfect seal. Rk, Rpk & Rvk parameters are the latest in measuring technology to achieve the results necessary for today’s high performance rings. The Rottler CNC Honing Machines utilize advanced CNC control and super abrasives to give the cylinder bore surface finish results that we require – every time!

Rottler Honing Expertise is up to date with the latest technology, and they are always there to help with questions – fast!!

– Keith Jones, Total Seal Piston Rings Phoenix, Arizona

The H85AX hones a complete line of cylinders – automatically. The H85AXY hones a complete V Block automatically with the optional Auto Rotate V Block Fixture.

Used by Professionals such as RoushYates and BES Racing to save time and improve bore finish.

• The H80X moves automatically from hole-to-hole – unattended • Automatic lower crash protection – no broken stones or holders • Automatic load control – perfect round and straight cylinders • Automatic CNC Control – finishes every cylinder to same size • Diamond and CBN abrasives – perfect surface finish • Magnetic Filtering and Roll Out Coolant Tank – easy cleaning

www.rottlermfg.com www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

8029 South 200th Street Kent, WA 98032 USA +1 253 872 7050

THE CUTTING EDGE

1-800-452-0534