Trader Magazine Summer Issue #162

FIXED-TURNING® VISION™ series, the WINNING move!

NEWEN FIXED-TURNING machines, The CNC Single Point Valve Seat & Guide Machines for All Shops, All Cylinder Heads!

Old ways don’t open new doors, make your move today !

FT ®

www.newen.com •NEWENdirect.com • www.facebook.com/newenfixedturning

Summer 2022 Volume 162

2

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

3

FARRIS EQUIPMENT SALES, INC. “Specializing in Late Model and Used Engine Rebuilding Equipment” Lubbock, TX (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Comec #ACF-200 Bore Mill/Surfacer Kwik-Way #FWS-II Bar on #1291 Stand Kwik-Way #FL, #FN, & #FW bars Kwik-Way #FL & #FN Overbore Kits Lacey Williams Boring Stand VALVE GUIDE & SEAT EQUIPMENT: Serdi #100 (LIKE NEW) but NO tooling!

Peterson #TCM-25 w/quick level table Winona #PH-2000 HEAD & BLOCK MILL/SURFACERS/FIXTURES: Comec #ACF-200 Bore Mill/Surfacer Winfield #DSF-2000 Head/Block Fixture Winfield #DSF-1000 Head/Block Fixture Storm-Vulcan #850 Head/Block Mill LINE BORE EQUIPMENT: Berco #BC-4 Line Bore Sunnen #CB-24000 OH Line Bore Kwik-Way #LBM Portable Set

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Cylinder Hone Peterson #HC-1DP power-stroked hone Kwik-Way & Honemaster manual cyl. hones #LBB-1699 Rod Hone – Very clean #LBB-1810 Power-Stroked, #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop #CRG-750 & #CRG-770 Cap Grinders Large #CR Mandrels from 2.9” to 4.5” Large Line Honing Mandrels Large #Y104-6562 Special Aluminum mandrel #HS-30 Valve Guide Hone #TN-111 Rod Aligners CRANKSHAFT GRINDERS & RELATED: Scledum #RG-200N Grinder (38” cap) Berco #RTM-300 Grinder (78” cap) Nugier Crankshaft Press Peterson #CRP-6 Crank Press

MISCELLANEOUS: AXE #UP-1437 Head Pressure Tester; NEW Kwik-Way #SVSD-II Valve Refacer; NEW Kwik-Way #016 Valve Refacer; Winona Flywheel Grinder; Steelabrator #250 shotblaster; Pollution Control #DC-II Oven; ABS Downdraft Cabinet; & other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing.

EQUIPMENT NEEDED: Sunnen CH-100 Line Hones; Sunnen #CV616 Cylinder Hones; Late model CBN Surfacers; Serdi, Rottler & Sunnen Seat/Guide Machines; Nice line bore machines; Boring/Surfacing Mills(all sizes); Sunnen #PLB-100 Line Bore Kit; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Sunnen #CHW-40 Work Stations; and any other equipment we can make money on. WE ARE LOOKING FOR LATER MODEL, NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you! Send photos of what you wish to sell to sam@farrisequipment.com

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals!

4

TRADER MAGAZINE Summer 2022 trader-mag.com

Proud member of

CUT AND SAvE TO fILE

and supplier of KMSG Buying Group ORDER LINE:

NEW!

1-416-321-6966 1-866-210-9251

Cummins ISB 5.9 (24 valves)

Cummins ISC 8.3 (24 valves)

Cylinder Head (Bare) .......................... Call for price Cylinder Head (Complete) ................ Call for price Crankshaft (Steel forged) ................ Call for price Gasket Kit (Upper) .............................. Call for price Gasket Kit (Lower) .............................. Call for price Connecting Rod .................................... Call for price

Cylinder Head (Bare) .......................... Call for price Cylinder Head (Complete) ................ Call for price Crankshaft (Steel forged) ................ Call for price Gasket Kit (Upper) .............................. Call for price Gasket Kit (Lower) .............................. Call for price Connecting Rod .................................... Call for price

Cummins 8.3L (6C, 6CT, 6CTA)

Cummins 5.9L (6B, 6BT, 6BTA, 6BTAA)

Cummins 3.9L (4B, 4BT, 4BTA)

Complete Head: Call for price Bare Head: Call for price

Complete Head: Call for price Bare Head: Call for price

Complete Head: Call for price Bare Head: Call for price

Cylinder Blocks

Crankshafts

Camshafts

• GM 6.5 (truck & van) • Cummins 5.9 6BT • Cummins 3.9 • Cummins 8.3 6CT 4BT (OEM) • Caterpillar 3306(DI)

• Cummins 4BT • Cummins 6CT 8.3

• Cummins 6BT 5.9 • Caterpillar 3306

• Cummins 3.9 • Cummins 5.9

• Cummins 8.3

CALL fOR pRICE QUOTE CyLINDER HEAD

CyLINDER HEAD

LONG BLOCK

OIL COOLER

GASKET KIT

• GM 6.5 (Truck & Van) • Chevy 350 (Vortec) • Chrysler 318/360 • Chrysler 3.9 • Caterpillar 3306(PC) 8N1187 • Caterpillar 3306(DI) 8N6796

• Caterpillar 3406(DI) NEW • Caterpillar 3406(PC) NEW • Caterpillar 3304(PC/DI) • Jeep 4.0 (#331) • Ford 4.0 (Early, Late)

• Cummins 5.9 (OEM) • Cummins 3.9 4BT (OEM) • Cummins 8.3 6CT (OEM)

• Cummins 3.9 • Cummins 5.9 • Cummins 8.3

• Cummins 3.9 Upper Kit (OEM) • Cummins 3.9 Lower Kit (OEM) • Cummins 5.9 Upper Kit (OEM) • Cummins 5.9 Lower Kit (OEM) • Cummins 8.3 Upper Kit (OEM) • Cummins 8.3 Lower Kit (OEM)

ACCESS INDUSTRIES CO.

CONNECTING ROD • Cummins 5.9/3.9(6BT/4BT) • Cummins 8.3 (6CT) • GM 6.5 NEW

ORDER LINE: 1-416-321-6966

“Prices subject to change - please call for pricing”

1-866-210-9251

E-MAIL: access.industries@hotmail.com trader-mag.com Summer 2022 TRADER MAGAZINE

5

Summer 2022 Volume 162

ADVERTISERS INDEX ABS Products “IT’S IN THERE”

Revco Precision 18

Access Industries 5

Robins 11, 18, 31, 49, 57

AERA 22

Rottler 74-76

Air & Power Tools 18

RPM Equipment Sales 51

American Gasket 21

RT Sales 48

Armex 59

Thomas Equipment Sales 37

Baker Equipment Sales 20, 37

T & S Machine 26-27

Business Card Marketplace 18

Turner Technology 14

Classifieds 46

Ultrasonic 33

Coder 21

Winona Van Norman 60-69

Comec 8, 10, 17

Ad Rates/Specifications 47

CWT Industries 2-3 Dakota Parts 20 Energy Suspension 15 Farris Equipment 4 Ferrea Valves 20 Irontite 43 Jamison Equipment 13 Jeff Ginter Racing Engines 53 K & S Regrinding 20 Media Blast & Abrasive 40, 42, 71 Newen 1, 7 Paul’s Service 48 PRI 34 Quality Cutter Grinding 15

This index is provided as service. The publisher does not assume liability for ommisions or errors.

Reserve your ad space TODAY! Call NOW: 714.671.0217 WWW.TRADER-MAG.COM

UNLEASH YOUR POWER WITH NEWEN FIXED-TURNING

®

Always stay one step ahead of the competition Reach a new level of performance with our 2022 VISIONTM Series!

Make your move today: contact@newen.com

...the extra comfort!

SERIES

www.newen.com • www.facebook.com/newenfixedturning

• ONE Machine • ONE Single Tool COUNTLESS OPPORTUNITIES

ERT FALL2021 P7.indd 1

9/2/2021 11:20:51 AM 7 trader-mag.com Summer 2022 TRADER MAGAZINE

8

TRADER MAGAZINE Summer 2022 trader-mag.com

CRANKSHAFT STROKE GAUGES Mountain Motors Large stroke V-8s

$190.00

New Stroke checker goes up to 12˝ stroke and the V’s open up to 12˝ apart for the mains.

*plus veneers

This crank rests on ABS Adjustable V-blocks Knowing the exact stroke is very important when ordering pistons and setting deck heights. Can also be used for checking unknown cranks. Just tighten your favorite digital caliper (not included) onto the bridge, sweep the journal at the top, zero your gauge and repeat at the bottom of the stroke for a direct stroke reading. No math involved! Adjustable V blocks for spacing. Will measure up to a 6.000˝ stroke (w/ 8-12˝ customer supplied digital caliper) BBC with STD journals. Very Fast!

Big Diesel, 3 main bearing 6 cyl, flathead Ford NO.

DESCRIPTION

PRICE

ST-5010

Specialty Tools - Stroke Gauge (Standard Red Gauge only)

$190.00

ST-5251-3 ST-4100-3436

Diesel Stroke Checker (12˝ Veneers sold separately) 6˝/150 mm Yellow LCD Digital Electronic Caliper

$300.00 $80.00

ST-4100-3438

8˝/200 mm Yellow LCD Digital Electronic Caliper

$100.00

ST-4100-3440

12˝/300 mm Yellow LCD Digital Electronic Caliper

$125.00

12˝ legs

$100.00

We sell these to work with a 5˝ or 6˝ Starret Indicator. Buy your own indicator and we provide the mounting bracket!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Summer 2022 TRADER MAGAZINE

9

ACF200.CNC CNC Boring Mill

RP1400

CNC Head & Block Surfacer

BEST VALUE IN THE INDUSTRY! VPT160

RP1000

Pressure Tester

Head & Block Surfacer

BGV260

Seat & Guide Press

Includes Valve Spring Assemby Tools

RV516

Valve Refacer

800-887-6076 info@comecus.com 10

TRADER MAGAZINE Summer 2022 trader-mag.com

www.comecus.com

trader-mag.com Summer 2022 TRADER MAGAZINE

11

The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage.

Pressure Blasters require less cfm to create the same abrasive velocity during operation.

Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes.

• Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable

JAMISON: your best source for

Automotive Shop Equipment Superflow SF-600 Flowbench with FLOWCOM

Sunnen SV-10 cylinder hone

$7,995

$34,995

SAENZ DIGITAL AD-680 FLOWBENCH

SAENZ DIGITAL AD-680 FLOWBENCH

$11,750

$11,750

Phoenix Valve Guide & Seat Machine

Berco AC-650M Boring / Milling Machine Delta Custom Tools

$14,950

$37,995

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com Summer 2022 TRADER MAGAZINE 13

14

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

15

Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm.

Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 16

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

17

*See full advertisements on pages 11, 31, 49 & 57

Seat Chuck

#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)

New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728

18

TRADER MAGAZINE Summer 2022 trader-mag.com

ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

19

20

TRADER MAGAZINE Summer 2022 trader-mag.com

214-388-0603

trader-mag.com Summer 2022 TRADER MAGAZINE

21

Celebrating 100 Years and 12,000 Engines AERA is 100 years old this year!

12,000 Engines

from our humble beginnings as the Midwest regrinders association formed in Des Moines, iowa, in 1922 — to now the leading international trade association for our industry! our specialized international network of professional engine builders, rebuilders, production engine remanufacturers and installers has the expertise and connections to get you the information you need, when you need it.

Prosis Pro has just reached a milestone that our team is very proud of, too. We start this 100th year at over 12,000 engine specifications from 200+ manufacturers covering a wide variety of engine applications. Quickly identify cylinder blocks, heads, crankshafts, camshafts, connecting rods and flywheels by casting number. in addition, it contains over 3,000 aera technical bulletins.

The Source for Information We are very proud of our longevity and the value we bring to our members. besides our six tech experts that are available toll-free to our members, our flagship program is called Prosis Pro, which is web-based engine specification software available to members of our association. a 30-day free trial is included with membership (there’s an additional fee after your trial period ends). if you are a new aera member, you have received a 30-day free trial — please contact Karen at 888-326-2372, ext. 202 or email karen@aera.org for more information.

Membership Benefits We invite all engine professionals to check out the benefits of an aera membership at aera.org/benefits. come join this elite group of real professionals and let this team help your business thrive.

Centennial Celebration Details will be coming soon about what we have planned for our 100th Anniversary Celebration… there’s even a special engine build in the works for the eref engine giveaway at Pri 2022!

THE SOURCE FOR INFORMATION 875 f ei n berg c o ur t, suite 106, car y, i L 60013 Phon e 888-326-2 3 7 2 or 815-526-7600 fax 888-329-2372 or 815-526-7601 • info@aera.org

www.aera.org

22

facebook.com/ aeraep

TRADER MAGAZINE Summer 2022 trader-mag.com

twitter.com/ aeraep

instagram.com/ engineprofessionalmag

youtube.com/ AERAEngineBuildersAssociation

THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs!

Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com Summer 2022 TRADER MAGAZINE

23

24

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

25

BLOCKMASTER CNC BLOCK MACHINING SYSTEM Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks.

Since you just decked it, go ahead and O-Ring the deck since we have the operation saved.

We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining!

Anyone with engine building knowledge can run the TS1000 after a couple of days with the included factory training in your shop!

T&S Machines and Tools Inc. www.tnsmachines.com 26

TRADER MAGAZINE Summer 2022 trader-mag.com

940-668-1002 12 Whitleys Ridge Lane Gainesville, TX 76240 facebook.com/TnSMachinesAndTools

PB500

DELUXE CRANKSHAFT BALANCER

You might ask, “Maybe there is a better system out there?” We don’t believe so! ProBal has invested heavily in building the quickest, most sensitive, and accurate balancing system available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual results achieved. A more sophisticated balancing software does not exist, and we can prove it.

We utilize the latest technology in our machines including Super-Smooth Linear Rail for both the columns and the drill unit. There is no other machine that is as easy to adjust as the PB500. Slide the columns into position with 1 finger!

All necessary accessories are included with the machine plus a calibration rotor so that you can verify the accuracy of the machine at any time. We do this all for less than any of our competitors manufacture all our products right here in the Republic of Texas!

Have an older machine? Call ProBal Dynamic Balancing for options to upgrade! Several computer solutions are available from simple laptops to full 22” TouchScreen Industrial consoles. On-Site Installation and Training is also available to get you up and running as quickly as possible!

940-668-1126 trader-mag.com Summer 2022 TRADER MAGAZINE

27

CHECK OUT OUR

NEW WEBSITE

WWW.ABS-PRODUCTS.COM 714.671.0728 591 Apollo St Brea, CA 92821 info@abs-products.com sales@abs-products.com

Heavy Metal Sale Overstock Inventory

W E H AV E E X C E S S S T O C K O N S E V E R A L S I Z E S : 1-1/8” x 765 1-1/4” x .800 1-1/4” x .850 1-1/4” x .1.200 1-3/8” x .800 1-3/8” x 1.250

To see pricing and quantities, visit our new website and click on “Clearance Items” on the top right portion of the home page.

Please contact us directly for bulk purchases of these items.

www.abs-products.com 714.671.0728 591 Apollo St Brea, CA 92821 info@abs-products.com sales@abs-products.com

28

TRADER MAGAZINE Summer 2022 trader-mag.com

COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Summer 2022 TRADER MAGAZINE

29

Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

30

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

31

32

TRADER MAGAZINE Summer 2022 trader-mag.com

GET CLEAN PARTS FAST Ultra 3200FA 65 gallon (246 liter) Capacity 32” Tank Length

STANDARD FEATURES

• Digital Touch Controls • Dual Filtration System with Weir Tank • Opposing Horizontal Transducers • Ultrasonic Clean from TWO Directions • 7 Day Heat Timer & Insulated Tank and Lid • Automatic Cycles!

SHOP E! ONLsIoN nicllc.com

shop.ultra

ultrasonicllc.com • youtube.com/ultrasonicllc • 513.502.9746 trader-mag.com Summer 2022 TRADER MAGAZINE

33

PRI fuels the passion for motorsports.

We build, promote, and protect the racing community.

WINNING TOGETHER MEMBERSHIP

34

TRADER MAGAZINE Summer 2022 trader-mag.com

Learn more at performanceracing.com/membership

Original Serdi Tooling Largest Selec�on of Cu�er Bits and Blank Sizes Industry’s Best Premium Micro-grain Carbide

New Genera�on Heavy Duty “Flat Top” Style Tooling Larger blanks ¨ More re-sharps ¨ Lower Cu�ng Forces ¨ Longer Life Posi�ve & Nega�ve Geometry ¨

¨

Posi�ve Geometry for Hard Seat Materials

Single Angle Indexable “Tri-Tools”

The Serdi Legacy!

Machines & Tooling

trader-mag.com Summer 2022 TRADER MAGAZINE

35

Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea.

New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea.

New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

36

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

37

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

38

TRADER MAGAZINE Summer 2022 trader-mag.com

System on Best Storage the market!

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Drilling Platforms for Hines & Winona Balancers

$149.00

ABS-Products.com Call 714-671-0728

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00 For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Summer 2022 TRADER MAGAZINE

39

3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package.

Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com

40

TRADER MAGAZINE Summer 2022 trader-mag.com

5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

////////////////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers.

Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher

41

The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com

42

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

43

44

TRADER MAGAZINE Summer 2022 trader-mag.com

BY ABS

Built for PERFECTION E n g i n e B u i ld i n g To o l s

Piston Deck Height Bridge

Piston Ring Squaring Tool

Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.

Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps.

Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get past head bolt distortion.

Longer (3”) legs available if desired.

• No wrenches required • Change bore sizes in seconds!

Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts

For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators.

Fits most milling machines.

trader-mag.com Summer 2022 TRADER MAGAZINE

45

Employment Opportunity

FOR SALE:

3. Axle Jet washers .............................................. $4,000.00

Seeking a highly motivated Sales/Customer service person.

Automotive/Engine knowledge is preferred but not required.

Salary commensurate with experience. Located in beautiful Southern California. Please send resume or inquiries to:

4. ABS Products Crank Polisher ............................... $500.00

dave@abs-products.com

5. Fork Lift Clark 5000 lbs. ................................... $3,000.00

_______________________________________________

6. Bead Blaster 750 Torque Plates ................................$ ask

Kwikway Boring Bars:

1. Storm 15 Special Crank Grinder ....................... $7,500.00 2. Berco ACP 151 Boring Bar with Tools ............... $8,000.00

7. Rockwell Lathe 24 niches long W/C .........................$ ask

Quincy Procell Orange, TX 77640 409-886-0545

Norum Equipment Refurbished Kwikway Boring Bars models FWSII, FWII, FN, and FL’s outright or exchange.

40 years with Kwikway.

Call Dick Norum 715-689-2882 or dick@norumequipment.com

Advertise now in the Trader Classifieds Call: 714/ 671-0217

www.trader-mag.com

3

3 As the US is in recovery mode, there has never been a more crucial time to advertise.

Keep your business in front of your customers and potential customers with affordable, affective advertising in the Trader Magazine.

Our 3 Issue Special includes: Fall, Winter/PRI 2022 and Spring issues.

The PRI issue is distributed at the PRI Show as well as mailed to over 16,000 businesses.

46

TRADER MAGAZINE Summer 2022 trader-mag.com

PERFORMANCE ENGINE BUILDERS EQUIPMENT & ACCESSORIES

Serdi 60 Used

Serdi 4.5 New

Call for pricing!

(248) 887-0422

Serdi 100 Rebuilt

Visit us online! rtsalesinc.com

russ@rtsalesinc.com • 1625 N Milford rd, HigHlaNd, Mi • www.rtsalesinc.com

PAUL’S SERVICE MACHINE & ENGINE REBUILDING

48

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE 49

50

TRADER MAGAZINE Summer 2022 trader-mag.com

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

RPM

Equipment Sales Jupiter Florida

Provider of High quality new & used engine rebuilding equipment and engine parts

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00

Ralph Nettles

ralphnettles@msn.com

561-906-2827

Warehouse Location 380 NW 144th Drive Okeechobee Fl. 34972

rpmequipmentsales.com trader-mag.com Summer 2022 TRADER MAGAZINE

51

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com

52

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

53

EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART

54

TRADER MAGAZINE Summer 2022 trader-mag.com

CONVERSION CHART OUNCES TO GRAMS

trader-mag.com Summer 2022 TRADER MAGAZINE

55

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

56

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

57

Using GhostFlow™ Technology Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls.

Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged.

95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

58

TRADER MAGAZINE Summer 2022 trader-mag.com

Is Non-Destructive Cleaning Critical?

Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry.

Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.

Before

After

Before

After

ARMEX, the Original Baking Soda Abrasive

Learn more at www.armex

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com Summer 2022 TRADER MAGAZINE

59

60

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

61

Sale

Pri

$5,42ce 5

62

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

63

THERMAL CLEANING SYSTEMS Model

64

Dimensions

TRADER MAGAZINE Summer 2022 trader-mag.com

Intl: 001-219-3500 / 800-533-8008

710 E. 17th St. N. / Wichita, KS 67214 / WinonaVanNorman.com

trader-mag.com Summer 2022 TRADER MAGAZINE

65

Long Life Oil Bath Table Support

Intl: 001-219-3500 / 800-533-8008

710 E. 17th St. N. / Wichita, KS 67214 / WinonaVanNorman.com 66

TRADER MAGAZINE Summer 2022 trader-mag.com

VOLTAGE

•Glass •Die Maintenance •Magnetic Materials •Non Ferrous Materials •Meat Processing Plants •Additive Manufacturing •Ceramic Grinding •Silicon Carbide •Punch & Die Grinders: •Sharpen Turret Press Tooling •Debur Stripper Plates •Regrind Carbide Pump Seals •Sharpen Ironworker Tooling •Sharpen Progressive Dies •Grind Carbide Tooling •Sharpen Rooftop Punches •Regrind Die Sets

trader-mag.com Summer 2022 TRADER MAGAZINE

67

68

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE 69

70

MBA

TUMBLE BASKET & TUMBLE BARREL MACHINES Want to batch blast small items and stop trying to hold them in your hand?

MBA also has a full line of Tumble Basket and Barrel Models for Batch Processing.

Using a Basket model allows a wide range of part volumes in one basket size with a large range of minimum and maximum batch sizes.

TB-5 COMPLETE MACHINE INCLUDED FEATURES BASKET MODELS

· Variable Speed Drive · Removable Mixing Paddles · Self-Contained Machine · Lift-Out Basket, 15” Dia. · 220 Sq.ft. Dust Collelctor · Vibrator Cleaning Cycle · 700 CFM Blower · Patented Separator Reclaimer · Plug-In Timer Control · Glass Beads, Aluminum Oxide, Plastic · All Controls · 30” Wide Footprint

WE ALSO MAKE

HARD TO FIND TUMBLE BARREL MACHINES for higher volumes and faster processing Phone (714)257.0484 mediablast.com 591 West Apollo Street Brea, CA 92821

trader-mag.com Summer 2022 TRADER MAGAZINE

71

Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

72

TRADER MAGAZINE Summer 2022 trader-mag.com

trader-mag.com Summer 2022 TRADER MAGAZINE

73

WIN WIN WITH WITH ROTTLER! ROTTLER!

EM79 EM79

ROTTLERMFG.COM 1-800-452-0534

74

TRADER MAGAZINE Summer 2022 trader-mag.com

WIN WIN WITH WITH ROTTLER! ROTTLER!

H85AX H85AX

Hands-on education, information and Q & A with the Performance Engine industry’s leading manufacturers, suppliers and engine builders - Now available at your convenience! engineperformanceexpo.com

ROTTLERMFG.COM 1-800-452-0534

75

WIN WIN WITH WITH ROTTLER! ROTTLER! AUTOMATICALLY DIGITIZE PORTS AND CYLINDERS WITH THE MOST ADVANCED MACHINING CENTER IN THE WORLD

EM69HP EM69HP

Hands-on education, information and Q & A with the Performance Engine industry’s leading manufacturers, suppliers and engine builders - Now available at your convenience! engineperformanceexpo.com

ROTTLERMFG.COM 1-800-452-0534

76

TRADER MAGAZINE Summer 2022 trader-mag.com