2020 VISION SERIES ARE HERE, GO FOR IT! â„¢
2
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
3
FARRIS EQUIPMENT SALES, INC. “Specializing in Late Model and Used Engine Rebuilding Equipment” Lubbock, TX (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Berco #AC-650 Bore/Surf Mill Rottler #F2B & #F4B Bore Systems NEW Kwik-Way #FL & #FN Portable Bars Kwik-Way #FL, #FN, #FW, #FW-VW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Kwik-Way #054 & #1291 Boring Stands Winona #CB-1401 Small Engine Bore System VALVE GUIDE & SEAT EQUIPMENT: Sunnen #VGS-20C Serdi #100 in AS-IS condition (needs rebuilding) Winona #PH-2000 & #PH-2000L Peterson #TCM-25 Kwik-Way #041 & #019 HEAD & BLOCK MILL/SURFACERS/FIXTURES: (we need some CBN Surfacers!!) Winfield #DSF-2000 Head/Block Fixture Peterson #50 Surfacer – Recond.
SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Hones (rebuilt & good cond.) #CH-100 Line Hone (rebuilt & good cond.) #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop #CRG-750 & #CG-8400 Cap Grinders Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrel Large Line Hone Mandrels from 4.0” to 5.0” #HS-30 valve guide hone LINE BORE EQUIPMENT: Sunnen #PLB-100 Portable Kit (We need some nice line bores) CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder – Rebuilt (in Ohio) Robbi #RMC -1500 Grinder (60” cap) and RMC-1200 Grinder (50” cap) Van Norman #477TA (74” cap)
MISCELLANEOUS: Winona #XL-2000 computer balancer (In Arkansas); ABS Soda Blaster; Kans. Inst. #AB502 shotblaster: Kans. Inst. #ALOV-89 Head Oven; Kans. Inst. #BK-17 Oven; NEW KwikWay #016 Valve Refacer; Berco #RAC-1500 Camgrinder; Nice Peterson #BK-17 oven; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing. EQUIPMENT NEEDED: Later model CBN Surfacers; Sunnen #CK-10 cylinder hones in good condition, Serdi, Rottler & Sunnen Seat/Guide Machines; Nice line bore machines; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Kwik-Way #855, #856, & #860 surfacers; Sunnen #CHW-40 Work Stations; and any other equipment we can make money on. WE ARE LOOKING FOR LATER MODEL, NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you! COME SEE US IN BOOTH #5615 AT THE PRI SHOW!!
www.farrisequipment.com E-mail: Sam@farrisequipment.com
SAM FARRIS
Sam is ready to make some deals! 4
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
5
Abro Balancing 66-67
Quality Cutter Grinding 15
ABS Products “IT’S IN THERE”
Rettig Bros., Inc. 56
Access Industries 5
Revco Precision 22
AERA 26
RMC 55
Air & Power Tools 22
ROBINS SEAT and Guide 22, 81
American Gasket 41
Rottler 82-84
ArmaKleen 56
RPM Equipment Sales 59
Armex 79
RT Sales 29
Baker Equipment Sales 24,60
SBI 28
Business Card Marketplace 22
Serdi 77
Classifieds 50
Scholler Shop Equipment 32
Coder 25
T & S Machine 17-21
CWT Industries 2-3
Turner Technology 14
Cyclone Manufacturing 15
Ultrasonic 36-37
Dakota Parts 24
Winona Van Norman 70-75
Delta Custom Tools 10
Ad Rates/Specifications 51
EPWI 7
“On the Road” 52-54
Farris Equipment 4 Ferrea Valves 24 FytronSoftware.com 57 Innovative Machine 35 Irontite 47 Jack Scholler Shop Equipment 32 Jamison Equipment 13 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44,46 Newen 1,9 Ohio Crankshaft 33 PRI 39
High Performance Kits… National Branded Kits… Or E-Direct Value Kits…
We’ve got you Covered!
ENGINE & PERFORMANCE WAREHOUSE Inc.
www.EPWI.net
Memphis (866) 917-4728
Albuquerque (877) 767-0100
Anchorage (800) 288-5573
Denver (800) 888-8970
Tacoma (800) 876-5152
Oklahoma City (800) 937-3652
Portland (800) 876-5152
Anaheim (800) 634-0969
Dallas (800) 284-5348
Houston (800) 288-6548
Oakland (800) 234-1410
Phoenix (888) 272-0191
San Antonio (800) 423-2707
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
7
INTRODUCING NEWEN® 2020 TRUNCATED CBN TIPPED SINGLE POINT INSERT!
at the forefront of technology!
™
Characteristics: • High Cutting Edge Strength • Extreme Wear Resistance • Excellent Welding Resistance • Good choice for Interrupted Cutting • Cutting Speed 100m/min to 300m/min+ Order by 2 P.M. Pacific Standard Time, we ship same day, low 2Day shipping rate: FT-11-11 FT-08-11 FT-06-11
For A, B, C,D, E Series Tip Holders For S Series Tip Holders For SS Series Tip Holders
Tel: Email:
+1-760-233-0067 contact@newen.com
Box of 10 Box of 10 Box of 10
390.00 390.00 US$ 450.00 US$ US$
www.newen.com • www.facebook.com/newenfixedturning
The latest CBN Grade for machining ANY Sintered Alloys and Cast Irons presenting machining difficulties.
We’ve Made Top Quality Affordable!™ trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
9
10
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
11
The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage. Pressure Blasters require less cfm to create the same abrasive velocity during operation. Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.
• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes. • Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12
Shown with optional Turntable
JAMISON: your best source for
Automotive Shop Equipment Rottler HP-3 Powerstroke Cylinder Hone
Newen G-II Guide & Seat Machine
$19,500
$5,995
Hines HC-500 Balancer Package
DCM Tech HB-3800 CBN Head & Block Resurfacer
$12,500
Sunnen CV-616 powerstroke honing machine
$13,995
Grease Monkey Ultrasonic Cleaner
Delta Custom Tools
$17,500
$4,495
We are Authorized Dealers for the following lines of parts & equipment:
Look to AXE
PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570
800-841-5405
www.jamisonequipment.com trader-mag.com PRI/Winter 2019 TRADER MAGAZINE 13
14
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Sandblasting Cabinets & Supplies Large capacity blast cabinets. Heavy duty welded construction.
Distributor Inquries Welcome! cycloneblasters.com info@cycloneblasters.com 269-782-9670
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
15
Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm. Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.
• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
16
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
T&S SELLS EFFICIENCY “How can I thrive in this business?”
The answer to this common is, “Take your best employee and make him more efficient.” Many times the most productive operator in your shop is yourself. If you can figure out how to duplicate yourself, your effort, your attention to detail, you will have mastered efficiency. But how do you actually accomplish that? The only way to make more money in the same amount of time is to get the work done faster. Even better is to automate so that while one machine is running other work is being performed. That’s efficiency!
PB500 Deluxe • Most sophisticated and sensitive system available • Finish correcting where you start
I can give a really good, artistic machinist the best Nicholson file (and we all know Nicholson is a great file!) and he MIGHT be able to surface a head flat and true with it and get the necessary surface finish…but he CANNOT make money doing it! Does that sound ridiculous? It should! Yet that is precisely how most shop owners have handicapped themselves. Many machinists feel that they can take the older, inefficient machines, and because they are really good at what they do, they can make them work sufficiently. And in many cases they can put out great work with them…but they can’t make great money with them. T&S sells efficiency. We have chosen to build machines that improve your work flow. We have focused on a few pieces of equipment, that if taken advantage of, should never cost you money (assuming your shop is busy). You get the work in the door and we will help you get it out!
• Deluxe model built specifically for crankshafts
BlockMaster • Probe, Bore & Deck in 20 minutes! • Probe every block, no saved programs • G-Code capable for production parts
940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools 17
BLOCKMASTER CNC BLOCK MACHINING SYSTEM Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks. Since you just decked it, go ahead and O-Ring the deck since we have the operation saved. We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining! Anyone with engine building knowledge can run the BlockMaster after a couple of days with the included factory training in your shop.
This is a couple of hours work on the BlockMaster 18
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
You can also make these with the BlockMaster!
PROBAL 500 DELUXE CRANKSHAFT BALANCER You might ask, “Maybe there is a ‘better’ system out there?”, we don’t believe so! T&S has invested heavily in building the quickest, most sensitive and accurate balancing software available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual balance achieved. A more sophisticated balancing software does not exist, and we can prove it. T&S uses the same system for balancing turbocharger rotors as for 15,000 lb electric motor armatures and GM locomotive crankshafts that are twenty feet long. Even those extremely large parts have only a six second sample time! T&S does not just offer an attachment to drill for heavy metal, we build the heavy metal stand into the base of the machine. We knew we were going to balance crankshafts when we built it so we held a crankshaft up in the air and built the ultimate machine around it. We include all necessary accessories with the machine. And we do this all for less than any of our competitors. As an added bonus our PB500 has the smallest footprint of any machine in the industry, AND the machine is manufactured right here in the Republic of Texas!
All accessories available
Have an older machine? Call us for a quote on an upgrade!! trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
19
Inventory Specials!
Refurbished with T&S Warranty Atrump E8FC Frame - Gray Tiltable Head with Low Gear 7.5 HP Spindle Motor 5,000 RPM Max Table 18” x 56.7” Travel X50” Y22” Z24” Spindle Nose to Table 38” Max Troyke 10” Rotary Block Fixture
Tooling Included with Every Block Machine: 1/4” Endmill Holder Precision Touch Probe 3/8” Endmill Holder Precision Boring Head 1/2” Endmill Holder 2.677” - 4.960” 3/4” Endmill Holder 12” CBN Surface Cutter ER32 Collet Set
Refurbished with T&S Warranty Standard T&S New Tooling Kit
Call For Pricing 20
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Refurbished with T&S Warranty Millport Red Rhino Frame Rigid Head Spindle 7.5 HP Spindle Motor 6,000 RPM Max Table 12” x 50” Travel X40” Y19” Z26“ Spindle Nose to Table 38” Max Troyke 10” Rotary Block Fixture
New with T&S Warranty Millport Red Rhino Frame Tiltable Head with Low Gear 5 HP Spindle Motor 4,000 RPM Max Table 16.5” x 63” Travel X40” Y13” Z30“ Spindle Nose to Table 38” Max Troyke 10” Rotary Block Fixture
940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
21
Seat Chuck
#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)
New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728
ZK /E , Z ǀŜÄ?ĹśÄ?ĎώϯΛĹ?žĂĹ?ĹŻÍ˜Ä?Žž ͞ώϴϾͿ ĎŽĎ°ĎŽÍ˜ĎľĎ´ĎłĎ˛ ͞ϴĎĎŹÍż ĎľĎ´Ď˛Í˜ĎŻĎĎ°Ďł нϾĎÍ˜ĎľĎľÍ˜ĎĎąĎąÍ˜Ď°Ď°Í˜ĎłĎłĎł нϾĎÍ˜ĎľĎ´Í˜ĎĎąĎÍ˜Ď˛ĎŹÍ˜Ď˛Ď˛ĎŻ Ç Ç Ç Í˜ZĹ˝Ä?Ĺ?ĹśĆ?ĎĎľĎ´ĎŻÍ˜Ä?Žž
ĎĎŽ ^Ä‚ĹŻÄžĆ? ZĞƉĆ? Θ Ďą tÄ‚ĆŒÄžĹšĹ˝ĆľĆ?Äž Ĺ?Ć?ĆšĆŒĹ?Ä?ĆľĆšĹ˝ĆŒĆ? /Ĺś &DSDFLW\ PP PP
&DSDFLW\ ´ ; ´ ; ´
&DSDFLW\ ´ ; ´ ; ´
&DSDFLW\ ´ ; ´ ; ´
6HH XV DW 35, %227+
*See full advertisement on page 82
22
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!
• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel
Accessories Included
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23
24
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Bob Weight Cards - 100 cards per pad, perforated - Part# BW-5099C $30.00
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
25
Prosis Pro now features over 10,000 engines from 190 manufacturers covering a wide variety of applications. recent improvements include: • Mobile-friendly, so it’s convenient and easy to use on smart phones and tablets. • Diagrams are now broken out into categories for ease of locating a specific diagram. • redesigned with a fresh new look. • Plus, many more user-friendly features! for more information, go to:
AERA.org/prosispro Prosis Pro is available to AERA members only.
Prosis Pro Demos
VIP Party at PRI
Visit us at these upcoming shows for demonstrations of the new Prosis Pro! AAPEX: Booth #4483 SEMA: Booth #23724 PRI: Booth #5514
attend our ViP Party on friday, Dec.13th, following the show. RSVP online:
AERA.org/party
THE SOURCE FOR INFORMATION 8 7 5 fe in b e r g c o u r t , s u i t e 106, c a r y , i L 60013 P ho n e 8 8 8 - 3 2 6 - 2 3 7 2 o r 815- 526- 7600 fax 888-329-2372 or 815-526-7601 • aera.org
www.aera.org 26
facebook.com/aeraep
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
twitter.com/aeraep
instagram.com/engineprofessionalmag
THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs! Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
27
28
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
29
PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.
The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle
Handheld Polisher A Must Have!
This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.
Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
31 31
USED EQUIPMENT CRANKSHAFT GRINDERS Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment, including 4-Wheels & Hubs...................................................................................................................................$10,000.00 Berco Hubs for 225 & 270................................................................................................................................................$275.00 AMC K2000U Crankshaft Grinder - 5 Wheels & Hubs - 2 Steady Rest, Dresser Arnold Gauge - Standard Tooling.........................................................................................................................$25,000.00 GUIDE & SEAT MACHINES ......................................................................................................................................................... Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture......................................................$6,500.00 DCM HMC2000 Guide & Seat Machine........................................................................................................................$6,500.00 VALVE GRINDERS Winona 860900 Valve Grinder.......................................................................................................................................$3,500.00 Carmac RV3000 Centerless Valve Grinder...................................................................................................................$4,500.00 SURFACE MACHINES RMC-12 Surfacer with CBN........................................................................................................................................$12,500.00 ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone................................................................................................................................................$2,500.00 FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder..................................................................................................................................$4,500.00 Winona FG5000 Flywheel Grinder................................................................................................................................$4,000.00 DCM Flywheel Grinder..................................................................................................................................................$3,500.00 BORING BARS Kwik-Way FWS II Boring Bar with Tool Box.................................................................................................................$3,750.00 Berco ACP 151 A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures Tool Sharpener, Standard Tooling...........................................................................................................................$8,500.00 Kwik-Way FN Boring Bar with Standard Tooling & Tool Box ......................................................................................$3,500.00 CLEANING EQUIPMENT RMC Rinse Booth with Turntable.................................................................................................................................$1,600.00 Goff Bayco Cleaning System - Oven - Steel Shot - Shaker........................................................................................$7,500.00 Kansas Instruments 502B Steel Shot Machine............................................................................................................$3,500.00 MISCELLANEOUS Diamond Flywheel Stones...............................................................................................................................................$175.00 New - Portable Crankshaft Polisher................................................................................................................................$795.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”..........................................................................................................$9.25 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”..................................................................................................$10.00 Sioux Seat Grinding Stones 2” through 2-1/2”.................................................................................................................$11.00 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”..........................................................................................................$19.50 Kwik-Way Seat Grinding Stones............................................................................................. Same Sizes and Prices as Sioux Nugier 100 Ton Press....................................................................................................................................................$7,500.00
32
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
33
Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing. Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments. Works great will all degree wheels through 16” or larger depending on the mounting hole.
3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495
18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings. Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
34
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Innovative Machine and Supply, Inc. 345 Sun Valley Circle Fenton MO 63026 Local 636-600-1171 • Fax 636-600-1181
www.innomach.com email scottb@innomach.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
35
ultrasonicllc.com 513-502-9746 Cincinnati, Ohio 36
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
ultrasonicllc.com 513-502-9746 Cincinnati, Ohio trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
37
Pollution Control Workstations
$7,900
.00
Pollution Control Workstations PCE-4736
47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm. Move up to 2HP, 1100 cfm blower.
Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products. This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.
See More Pollution Control Workstations and many other products: www.youtube.com/absproducts
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
THE PERFORMANCE RACING INDUSTRY TRADE SHOW
DISCOVER NEW TECHNOLOGY. IDEAS. BUSINESS. – DECEMBER 12–14, 2019 INDI A N A P OLIS, INDI A N A USA
The PRI Trade Show is the racing industry’s No. 1 venue for new technology, ideas and business opportunities. If you’re in the business of racing, you can’t afford to miss this event.
• ALL FORMS OF AUTO RACING • OVER 1100 EXHIBITING COMPANIES • A TRADE-ONLY EVENT
THE BUSINESS OF R ACING STARTS HERE
Learn more at pri2019.com trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
39
Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders! PowerPeen 6048
We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in. They are stripped down to remove paint and magnafluxed, Gary’s shop does it all. He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers. Shot peening, plastic media, glass bead, all runs through this versatile production quality machine. If you run a large production shop like Gary’s we have the custom blasting machines you need.
This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!! Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
40
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Excellent maching for shot peening cranks! In fact that’s what we designed it for!
The welded steel tubing that works as an engine mount Lycoming prop engine.
Lycoming prop engine cases on turntable and dolly system, entering the blaster.
Nozzles for shot peening, blasting and plastic media! • A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle
Each nozzle: $250.00 Full set: $1250.00 trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
41
THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!
CH-1 Crank Rack
CH-1 Crank Rack with optional top, V-blocks and one cam hanger.
CH-2 Double Crank Rack
CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level. Each level holds between 20-24 cranks depending upon the model.
ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00
Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory. This is a rack for every crank.
SAVE MONEY AND FLOOR SPACE!
2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack
591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts
42
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
System on Best Storage the market!
Can Be Arbors perately! Se Bought
Mill Mounted Drilling Platform
ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)
ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments
$149.00
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
ABS-Products.com Call 714-671-0728
Drilling Platforms for Hines & Winona Balancers
Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert. Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.) CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack. CR-ES-3 ............................................................................. $95.00
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.
Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
43
3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package. Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.
Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles
591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
5.0 CRANK&CAM POLISHER
Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.
///////////////////////////////////////////// Please contact us for a spec sheet and pricing.
Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
Camshaft Polisher 45
The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.
Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal
591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com
46
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
47
ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.
Attached Dust Collector
FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
BY ABS
Built for PERFECTION E n g i n e B u i ld i n g To o l s
Piston Deck Height Bridge
Piston Ring Squaring Tool
Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.
Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps. Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get past head bolt distortion. Longer (3”) legs available if desired. • No wrenches required • Change bore sizes in seconds!
Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts
For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators. Fits most milling machines.
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE 49
Shop Equipment for Sale: 2: CRG-500 cap grinders/ 3: Sunnen rod hones RTM Berco 225 crankshaft grinder reconditioned & aligned..............................................................$8K 860 Lempco surfacer..................................................................$3K QT-300 SimTest machine............................................................$3K KwikWayFN cylinder boring-bar.................................................$3K Ampro thermal cleaning system this is the smaller system, will do a 350 chevy block........................................................$3K Tobin Arp seat and guide machine fully tooled ..........................$4K VanNorman boring stand............................................................$1K Ferndale, Michigan Adney Brown 586-549-7557 ________________________________________ Shop Equipment for Sale: Storm Vulcan Duralube/Parkerizing 3 Tank Unit “Lubrite” Model D-9 as new condition, never used Serial number D9-275 Power: 220V 1Ph 54 amps................. $5499 Land & Sea 800HP Engine Dyno w/control console (attached). Computer/Printer/Screen etc. all built in, lots of accessories w/500 gallon stainless steel h/duty tank, lots more............ $15,500 Sun Distributor Tester with Stand, Model DT-404 ‘like new’ Serial# 32A 2377 w/dwell & vacuum, 4, 6, & 8 cylinder Completely rebuilt unit & stand, suit museum display........... $2749 Burr King Tumbler 200SX w/stand (PAK5000) with pump/tank Extra ceramic media, detergent circulates from tank.............. $749 Pictures: danton@aptfast.com 800-278-3278 Riverside CA ________________________________________ High Performance Machine Shop & Auto Parts Strategically located in north-central Virginia with no competition within 40 miles in all directions. This full service business provides the new owner exceptional growth potential. Currently building and selling top quality high performance engines, trans and rear-ends for retail and wholesale markets for over 40 years. Interested buyers inquire by phone: 540-840-0069 or e-mail: bcauto69@bcauto69.net
Shop for Sale: Auto dynamic balancing and engine rebuilding. Doing business in Baldwin Park, California since 1959. Work year-round. Selling the business w/ all machines, equipment and customer list....................................................................$100K Rod Philips Auto Dynamic Balancing 626-962-9135 ___________________________________________ Kwikway Boring Bars: Norum Equipment Refurbished Kwikway Boring Bars models FWSII, FWII, FN, and FL’s outright or exchange. 40 years with Kwikway. Call Dick Norum 715-689-2882 or dick@norumequipment.com ___________________________________________ NEWEN TRAINING 101 This is a 2-3 day class taught at your facility. Training is for programming and operating a NEWEN BB or EPOC machine. My name is Charlie Lawlor I have over 12 years’ experience, 20,000 hours and have taught 150 people all over the world on how to operate these machines. I worked with NASCAR, NHRA, FORMULA ONE race teams, worked with industrial machines, engine rebuilders and motorcycle race teams. NEWEN 101 Classes include: • Setting up machine • Updating software • Basic programming • Designing both standard valve seat profiles and performance valve seat profiles • Valve seat removal • Offset seat programming and design Note: I am a private contractor, not affiliated with NEWEN USA Contact: 480-282-3472 or charlie@motorcyclemachine.com
Advertise now in the Trader Classifieds Call: 714/ 671-0217 50
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
www.trader-mag.com
trader-mag.com PRI/Winter 2018 TRADER MAGAZINE
51
On the ROAD
Rottler Open House 2019 This year we attended the annual Rottler Open House, which also doubles as the AERA regional conference. As usual Rottler staff made everyone feel welcome and the workshops provided a wealth of information. Below are many of the companies who had table displays at the event.
Mahle
DNJ
Fytron
52
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Qualfast
EPWI
Oerlikon
Driven
THE CUTTING EDGE
Goodson
Melling Performance
Maxima
LA Sleeve
SBI
Darton Sleeves
Total Seal
Elring
RT Sales
Aera
Maxiforce
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
53
On the ROAD Saftey-Kleen Road Show In early October we attended the Safety-Kleen No Limits Parts Cleaning Road Show at the Texas Motor Speedway. Everyone there provided a wealth of information on the best cleaning options. Thanks to Safety-Kleen and the facility for such a great show!
Magido
54
Blackstone-Ney
Performance Plus
Fountain Industries
Hedson
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Keller Products
IPMENT
n o i t a Innov ING EQU
EBUILD NGINE R
E
! e r e H s t r a t S
RMC V Series CNC machining centers RMC... The original turnkey CNC machine for the automotive after-market. Don’t get sold on cheap components and outrageous upgrade costs. RMC CNC machines are designed with the future in mind, no upgrades required. Our line up of enclosed machining centers have the latest 9000 series control with 120GB solid state drive, 4GB of RAM, USB ports and Ethernet connectivity and the Big-Plus® dual contact spindle system. Our V series machines have the power and torque for serious machining capability.
Visit RMC at Booth #5543
Don’t listen to the competition telling you “how to make money” Do your homework and give RMC the opportunity to SHOW YOU HOW!
Call our Sales Team Today! 800-248-5062 or visit our website www.rmcengine.com trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
55
ArmaKleenTrdaerHalPageAd.qxp 10/16/19 8:33 AM Page 1
Visit the To Meet Booth at THE KING, Richard Petty
™
P # Boo RI 53 th 49
The KING, Richard Petty will be on hand to make a special announcement, sign autographs and take photos with fans. We look forward to seeing you!
ArmaKleen.com EQUIPMENT FOR SALE QTY
ITEM
(1)
Van Norman 570 Rotary Broach .......................................................................................... $1000
(1)
Sioux 645 valve facer on Sioux rolling cabinet w/ seat grinder, dresser, 24 pilots, 35 stones and 3 stone holders ............................................................ $450
(2)
S/V 15A CRK Grinders on centers w/10 stones & hubs each............................................. $2500 each
(4) (20)
Barrels 50 gal Gov’t surplus cosmoline .............................................................................. $75 each Steel H.D. crankshaft racks two row & three row, 54 in. wide, 90 in. tall, 40 in. deep, 2 row racks hold 96 long cranks, 3 row racks, hold 144 short cranks ......................................................................................................... $50 each
(1)
S/V Kotafin polisher w/ lathe and belts .............................................................................. $2000
(1)
Engine lathe, 16 in. swing, 6 ft. bed, tailstock, steady rest, 3 & 4 jaw chucks.................. $1000
(1)
C/M T14 Large airless steel blaster w/ tumbler ............................................................... $3500 OBO
(1)
OHI LIAB N553 15 H.P. air compressor (no tank) ............................................................... $300 OBO
(1)
Quincey QT 7885 20 H.P. air compressor ........................................................................... $1200 OBO
(1)
Gardner Denver 30 H.P. air compressor .............................................................................. $1500 OBO
RETTIG BROS., INC. 56
PRICE
2612 Woodland Ave. • Modesto, CA 95352 Phone: 209/ 526-0342 209/ 988-9962 209/ 529-8016
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
57
N-200 Stage II Soda Blaster Using GhostFlow™ Technology
STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System
The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes. This allows the user to operate longer hours and access other part handling options important to soda blasting applications. This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals. The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production. Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology. (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
58
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head! 1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable
714-671-0728 abs-products.com
RPM
Equipment Sales Jupiter Florida
Provider of High quality new & used engine rebuilding equipment. We Export!
VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00
VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00
Ralph Nettles
ralphnettles@msn.com
561-906-2827
Warehouse Location 380 NW 144th Drive Okeechobee Fl. 34972
rpmequipmentsales.com trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
59
60
TRADER MAGAZINE Fall 2019 trader-mag.com
COBRA STAGE I SODA BLAST CABINET
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
61
EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH
62
CONVERSION CHART OUNCES TO GRAMS OZ
GRAMS
TUNGSTEN
STEEL
NET GAIN
7/16" x .875" 1/2" x .750"
38 43
17 19
21 24
1/16 1/8
=
3.54
1/2" x 1.000" 1/2" x 1.200"
57 65
25 30
32 35
3/16 1/4
= =
5.31 7.08
1/2" x 1.250" 5/8" x 1.000"
72 91
31 39
41 52
5/16 3/8
= =
8.85 10.62
5/8" x 1.200"
109
47
62
5/8" x 1.250"
114
49
65
3/4" x 1.000"
122
56
66
3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700" 7/8" x 0.750"
147 162 87 117 127
67 70 38 54 58
80 92 49 63 69
7/16 1/2 9/16 5/8 11/16
= = = = =
12.39 14.16 15.63 17.70 19.47
3/4
=
21.24
13/16
=
23.04
7/8
=
24.78
7/8" x 1.000" 7/8" x 1.100"
169 186
77 85
92 101
7/8" x 1.200"
198
92
106
7/8" x 1.250"
210
96
114
1" x 0.500"
111
50
61
15/16 1 2 3 4
= = = = =
26.55 28.35 56.70 85.05 113.40
1" x 0.700"
153
70
83
5
=
141.75
1" x 0.750" 1" x 0.850"
164 190
75 85
89 105
6
=
170.10
= = = = = = = = =
198.45 226.80 255.15 283.50 311.85 340.20 368.55 396.90 425.25
=
453.60
1" x 1.000"
227
100
127
1" x 1.100"
243
110
133
1" x 1.200"
265
120
145
1" x 1.250"
275
125
150
1-1/8" x 1.000"
282
127
155
1-1/8" x 1.200"
325
153
172
1-1/8" x 1.250"
350
160
190
1-1/4" x 1.000"
346
157
189
7 8 9 10 11 12 13 14 15
1-1/4" x 1.200"
418
189
229
16
1-1/4" x 1.250"
445
196
249
1-3/8" x 0.750"
328
142
186
1-3/8" x 1.250"
543
237
306
1-1/2" x .600"
304
135
169
1-1/2" x 1.000"
504
226
278
1-1/2" x 1.250"
635
283
352
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
=
1.77
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
Mention This Ad For A Special Discount
Balancing Slugs, Pins, Plates & Bars
Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.
Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
63
Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal tungsten checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel
Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00
R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price
Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed. Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00
64
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
65
66
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Seat and guide machine.
ABRO is pleased to introduce our newest complement to our automotive balancer line. Stop by our booth 5736, to see our new Seat n Guide machine, the VSG8X. The VSG8X uses the proven fixed carbide pilot tooling with front mount steering wheel for spindle down feed. The ABRO VSG8X is manufactured from heavy thick wall cast iron. The spindle head tilts to 12 degrees on both sides. Catch us at the following conventions accross the globe:-
Fully automatic, Unmanned, Brake Drum Balancer in Indiana
1) Manufacturing Indonesia - 4th to 7th December 2019. Jakarta, Indonesia. 2) PRI Show - 12th to 14th December 2019. Indianapolis, USA. 3) STEELFAB - 13th to 16th January 2020. Sharjah, UAE. 4) IMTEX - 24th to 28th January 2020. Bangalore, India. 5) EMCW - 13th -14th May 2020. Milwaukee, USA. 6) EASA Convention - 14th to 16th June 2020. Nashville, USA
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
67
$190.00
We sell these to work with a 5˝ or 6˝ Starret Indicator. You buy your own indicator and we provide the mounting bracket! 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
68
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Get Abrasive! ABS Blasting Media Abrasives for all Applications.
Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock. Give us a call to discuss which abrasive will work best with your application and machine. BAKING SODA PLASTIC MEDIA
STEEL GRIT
ALUMINUM OXIDE
STEEL SHOT
(714)671-0728 ABS-Products.com sales@abs-products.com info@ abs-products.com youtube.com/absproducts
GLASS BEADS
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE 69
MENTION THIS AD TO SAVE 10% ON YOUR REPLACEMENT
PLATEN GRINDER SALE PRICE: $3,995 List Price: $4,995 230v 60hz / Single or 3 phase
When the job calls for platen grinding, rely on Winona Van Norman grinder belts to deliver the precise finish you need every time. Our selection of belts is broad enough to handle any of your job requirements, working with both cast iron, steel, and aluminum parts. Give us a call or visit us online to find the right belt for your application. Plus get it shipped fast using expedited parts ordering process. And while you’re at it, check out our PG1232 Platen Grinder with its lengthy 32� capacity and removeable belt guards that make it easier to do 90º jobs. Built to last, the PG1232 is made from 3/8’’ heavy duty steel. It also comes with a hardened and precise ½’’ ground platen so you can be sure our grit grind true.
SEE US AT BOOTH #5417
ORDER 5 OR MORE BELTS AND TAKE ANOTHER 20% OFF 40-Grit Silicon Carbide
80-Grit Silicon Carbide
Belt Size
Part #
11-7/8" x 76" 11-7/8" x 79" 11-7/8" x 89" 11-7/8" x 91"
W1255-5 W1250-5 W1249-5 W1400-5 W1401-5 WVN812203
14" x 86" 14" x 103"
WVN812249 W1251-5 14" x 113-1/2" 15" x 127-1/2" W1252-4 14" x 107"
40-Grit Aluminum Oxide
for Al uminum
for Aluminum & Cast Iron
Price $33.00
Part #
$35.00 $36.00
Price
for Cas t Iron
Part #
$36.00
W1255-8
W1250-6
$36.00
W1250-8
W1249-6
$43.00
W1249-8
W1255-3
W1249-1
$76.00 $78.00 $88.00
$82.00
WVN812210
$51.00
WVN812265
$118.00
W1251-8
$93.00 $99.00 $116.00
WVN812260
$58.00 $66.00
W1251-1
$120.00 $146.00
W1251-3 W1252-3
W1250-1
W1252-2
W1401-1
W1252-1
| | @ | 70
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
Price
$70.00 $73.00
WVN812212
WVN812248
$48.00 $58.00 $63.00
$55.00 $55.00
W1255-1
W1400-1
WVN812207
$48.00
W1401-3
Part #
$58.00 $60.00
W1400-8
W1400-3
Price $53.00
W1401-8
$46.00 $48.00 $48.00
$38.00 $43.00
40-Grit Cool Cut for Cas t Iron & Steel
$118.00
MIX & MATCH
Buy 5 or more stones and take another
20% off
 Â?Â? Â?Â?  Â? Â
€
‚  Â
  ƒ„ … /† Â?  Â
 �
Â? Â?Â?
$48.00
Â?Â?
 �
Â? Â?Â?
$59.00
  €‚Â
Â
ƒ �
„ €…Â
$30.00
  €‚Â
 �
Â? Â?Â?
†
$54.00
ÂÂ?Â?
Workpiece/Material
Part No.
Size
CBN Sides
801120C
2.00�
FLARED
801128C
3.00�
FLARED
$197.00
863332C
4.00�
FLARED
$199.00
801130C
6.00�
FLARED
$220.00
801130CX
6.00�
FLARED
$220.00
801130D
6.00�
DIAMOND FLARED
$220.00
801105C
2.00�
STRAIGHT
General purpose, for cast iron & medium steel
$128.00
801106C
2.25�
STRAIGHT
General purpose, for cast iron & medium steel
$138.00
801107C
2.50�
STRAIGHT
General purpose, for cast iron & medium steel
$154.00
801108C
3.00�
STRAIGHT
General purpose, for cast iron & medium steel
$197.00
801130CG
6.00�
FLARED
Heavy graphite – Best for billet steel
$220.00
801123C
5.00�
FLARED
General purpose, for cast iron & medium steel
$210.00
801123CG
5.00�
FLARED
Heavy graphite – Best for billet steel
$210.00
List
SEE US AT BOOTH #5417
|
| @ Â Â? Â? Â? | Â Â? Â? Â?
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
71
CBN MILLING & SURFACE GRINDERS
SEE US AT BOOTH #5417
SMX $29,995
SM130
SM70
SM101
$10,995
$23,495
@
72
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
$24,995
SEE US AT BOOTH #5417
@
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
73
SEE US AT BOOTH #5417
@
74
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
 �
Â? Â
Â? Â? Â? Â Â? Â? Â?
SEE US AT BOOTH #5417
@
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
75
Update your Piston Ring Grinder to an ABS Ring Grinder!
START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs. We have what you need for any type of ring! Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00
New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea. New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea. New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts 76
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
77
Blizzard Stage III Soda Blaster Using GhostFlow™ Technology
Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls. Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged. 95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.
STANDARD MACHINE FEATURES
• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
78
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
30 Is Non-Destructive Cleaning Critical?
Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry. Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.
Before
After
Before
After
ARMEX, the Original Baking Soda Abrasive
Learn more at www.armex
ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
79
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 80
trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
81
Don’t Wait. Sale Ends Soon! SAV E
2500
$
SG8MTS
for orders placed while stock is available MANUALMATIC VERSATILITY The SG8MTS has TWO modes of Operation: MANUALMATIC – Increased productivity by 30-50% while cutting all valve seats to equal depth. During seat cutting, simply turn the spindle feed steering wheel and the control takes care of all the functions like workhead float/clamp, centering in the valve guide and spindle speed on/off – no buttons! MANUAL – Touch Screen buttons function just like physical buttons. The spindle vertical position is displayed on the touch screen. Simply fed the spindle down until the cutting insert touches the valve seat, touch “set zero” button and then the digital display will show exactly where the spindle is at all times.
THE CUTTING EDGE 82
TRADER MAGAZINE PRI/Winter 2019 trader-mag.com
8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050
1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc
Simple. Fast. Competitive. Rottler’s Cylinder Head Machining Equipment is so advanced that even the most complex operations can be programmed and executed quickly, accurately and reliably. For surfacing, seat and guide installation and cutting and valve refacing procedures, only Rottler has the cutting edge you need to maximize performance and profitability.
Rottler’s surfacing machines are the fastest machine for surfacing heads, blocks and manifolds. Designed with the latest CNC technology and proven designs found in Rottler CNC machining centers! Handles the smallest parts to large diesel cylinder heads.
Rottler MANUALMATIC control has revolutionized valve seat cutting! During seat cutting, the operator does not have to operate any buttons, switches or pedals, simply turn the spindle feed handwheel up and down and the MANUALMATIC control takes care of all the functions
THE CUTTING EDGE
Rottler's centerless grinding valve refacing machine is designed to grind a set of valves to equal length from stem/butt end to valve seat. The Rottler Centerless System allows a wide range of valve stem diameters to be ground without changing any collets or chucks.
8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050
1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc trader-mag.com PRI/Winter 2019 TRADER MAGAZINE
83
THE HONE THAT GROWS WITH YOU Last hone you will ever have to buy!
The Rottler H85A is the only ground level hone that can be upgraded for increased speed and productivity. Start with the Rottler H85A model and as your customer demand increases simply call Rottler to automate your hone. No need to replace the machine with a higher production model.
COMPARE THE COMPETITION • Proven, Trusted, Simple CNC Control • Automatic Load Sensing for Consistent Finish • Upgradable to Unattended Automatic Hole-to-Hole Operation • Over 200 Machines installed Worldwide
In addition to being fully upgradeable, Rottler hones are proven to last decades in the field. Their rugged base, linear slideways and ball screw with auto lubrication work together to increase life expectancy.
Diamonds reduce abrasive costs by 96% over conventional abrasives! Rottler Hones pay for themselves in under 5 years. Call Rottler for details. THE CUTTING EDGE
3 YEAR WARRANTY. Built to last & upgrade. Guaranteed!
8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050
1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc