www.newen.com • www.facebook.com/newenfixedturning
Fall 2020 Volume 155
World Leader in CNC Valve Seat & Guide Equipment! REQUEST YOUR NO OBLIGATION QUOTE: => fixed-turning@newen.com
2
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
3
FARRIS EQUIPMENT SALES, INC. “Specializing in Late Model and Used Engine Rebuilding Equipment” Lubbock, TX (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Rottler #F2B & #F4B Bore Systems Kwik-Way #FL, #FN, #FW, #FW-VW and #FWS bars Kwik-Way #FL & #FN Overbore Kits Kwik-Way #054 & #1291 Boring Stands
SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Hones (good cond.) #CH-100 Line Hone (rebuilt) #MBB1660 hone (Like New) #LBB-1810 Power-Stroked, #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop #CRG-750 & #CG-8400 Cap Grinders Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrel #10RY-3000, #15RY-3500, #10RY-4500 & #15RY-4500 Line Hone Mandrels #CRH-50 Rod Heaters (recond & good cond) #BP-10 Piston Pin Press
VALVE GUIDE & SEAT EQUIPMENT: Serdi #60 Sunnen #VGS-20C Winona #PH-2000 & #PH-2000L Peterson #TCM-25 Kwik-Way #036 & #019 HEAD & BLOCK MILL/SURFACERS/FIXTURES: DCM #HB-3800 CBN mill Storm #85B Head/Block Mill Winfield #DSF-1500 Head/Block Fixture Autocraft Belt Surfacer Peterson #50 Surfacer – Recond. & Used
LINE BORE EQUIPMENT: Tobin-Arp #TA-15 Flat Top Machine Sunnen #PLB-100 Portable Kit (We need some nice line bores) CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder –Rebuilt (in Ohio) Scledum #RG-270 Grinder (74” cap) Robbi #RMC -1500 Grinder (60” cap)
MISCELLANEOUS: AXE #UP-1437 Head Pressure Tester; Delta #6000 Head Pressure Tester; ABS Soda Blaster; Kans. Inst. #ALOV-89 Head Oven; Kans. Inst. #BK-17 Oven; NEW Kwik-Way #016 Valve Refacer; Berco #RAC-1500 Camgrinder; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing. EQUIPMENT NEEDED: Later model CBN Surfacers; Sunnen #CK-10 cylinder hones in good condition, Serdi, Rottler & Sunnen Seat/Guide Machines; Nice line bore machines; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Sunnen #CHW-40 Work Stations; and any other equipment we can make money on. WE ARE LOOKING FOR LATER MODEL, NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you! Send photos of what you wish to sell to sam@farrisequipment.com
Come visit us in Booth #5615 at PRI Show in Indianapolis!!!
www.farrisequipment.com E-mail: Sam@farrisequipment.com
SAM FARRIS
Sam is ready to make some deals! 4
TRADER MAGAZINE Fall 2020 trader-mag.com
Prices subject to change. Please call for updated information trader-mag.com Fall 2020 TRADER MAGAZINE
5
Fall 2020 Volume 155
ADVERTISERS INDEX ABS Products “IT’S IN THERE”
Rettig Bros., Inc. 52
Access Industries 5
Revco Precision 22
AERA 26
Robins 22, 74-77
Air & Power Tools 22
Rottler 78-80
American Gasket 41
RPM Equipment Sales 55
ArmaKleen 52
RT Sales 8
Armex 63
Serdi 39
Baker Equipment Sales 24, 56
Scholler Shop Equipment 32-33
Business Card Marketplace 22
T & S Machine 17-21
Classifieds 50
Turner Technology 14
Coder 25
Ultrasonic 37
Comec 10
Winona Van Norman 66-71
CWT Industries 2-3
Ad Rates/Specifications 51
Dakota Parts 24 Energy Suspension 15 EPWI 7 Farris Equipment 4 Ferrea Valves 24 Innovative Machine 35 Irontite 47 Jack Scholler Shop Equipment 32-33 Jamison Equipment 13 Jeff Ginter Racing Engines 36 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44, 46 Mickey Thompson 73 Newen 1, 9 Quality Cutter Grinding 15
This index is provided as service. The publisher does not assume liability for ommisions or errors.
Reserve your ad space TODAY! Call NOW: 714.671.0217 WWW.TRADER-MAG.COM
KI T D R A IZ
WNLY at EPWI!
ENGINE & PERFORMANCE WAREHOUSE Inc.
O
• Save by buying the kit rather than individual parts • Realtime customer specific data for pricing, discounts and inventory • Customize or substitute any component • As you make changes or substitutions, Wizard automatically adjusts price • Build kits for 1000’s of applications • Wizard searches EPWI’s 13 locations to get you what you need • Build anything from a master kit to a cam kit
www.EPWI.net
Memphis (866) 917-4728
Albuquerque {877} 767-0100
Anchorage (800) 288-5573
Denver (800) 888-8970
Tacoma (800) 876-5152
Oklahoma City (800) 937-3652
Portland (800) 876-5152
Anaheim (800) 634-0969
Dallas (800) 284-5348
Houston (800) 288-6548
Oakland (800) 234-1410
Phoenix (888) 272-0191
San Antonio (800) 423-2707
trader-mag.com Fall 2020 TRADER MAGAZINE
7
8
TRADER MAGAZINE Fall 2020 trader-mag.com
UNLEASH YOUR POWER WITH NEWEN FIXED-TURNING®
Always stay one step ahead of the competition
Reach a new level of performance with our 2020 VISION™Series!
www.newen.com • www.facebook.com/newenfixedturning
Request your no obligation quote today at contact@newen.com
• ONE Machine • ONE Single Tool COUNTLESS OPPORTUNITIES
FIXED-TURNING FIXED TURNING Unmistakably the best!
SERIES
...a technology concentrate!
®
TM
trader-mag.com Fall 2020 TRADER MAGAZINE ERT FALL2019 P7.indd 1
9
8/20/2019 11:42:49 AM
ENGINE REBUILDING EQUIPMENT ACF200.CNC CNC Boring Mill
RP1400
CNC Head & Block Surfacer
RP1000
VPT160
Head & Block Surfacer
Pressure Tester
BGV260
Seat & Guide Press
Includes Valve Spring Assemby Tools
RV516
Valve Refacer
800-887-6076 info@comecus.com 10
TRADER MAGAZINE Fall 2020 trader-mag.com
www.comecus.com
591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
trader-mag.com Fall 2020 TRADER MAGAZINE
11
The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage. Pressure Blasters require less cfm to create the same abrasive velocity during operation. Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.
• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes. • Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12
Shown with optional Turntable
JAMISON: your best source for
Automotive Shop Equipment BLOCK-SHOCKER
*Rust Removal System*
$3,795
Berco RTM270A Crankshaft Grinder *Near New Condition*
$90,000
Berco SPY360-1300 Delta Custom Tools
$13,750 We are Authorized Dealers for the following lines of parts & equipment:
Look to AXE
PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570
800-841-5405
www.jamisonequipment.com trader-mag.com Fall 2020 TRADER MAGAZINE 13
14
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
15
Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm. Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.
• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
16
TRADER MAGAZINE Fall 2020 trader-mag.com
T&S SELLS EFFICIENCY “How can I thrive in this business?”
The answer to this common is, “Take your best employee and make him more efficient.” Many times the most productive operator in your shop is yourself. If you can figure out how to duplicate yourself, your effort, your attention to detail, you will have mastered efficiency. But how do you actually accomplish that? The only way to make more money in the same amount of time is to get the work done faster. Even better is to automate so that while one machine is running other work is being performed. That’s efficiency!
PB500 Deluxe • Most sophisticated and sensitive system available • Finish correcting where you start
I can give a really good, artistic machinist the best Nicholson file (and we all know Nicholson is a great file!) and he MIGHT be able to surface a head flat and true with it and get the necessary surface finish…but he CANNOT make money doing it! Does that sound ridiculous? It should! Yet that is precisely how most shop owners have handicapped themselves. Many machinists feel that they can take the older, inefficient machines, and because they are really good at what they do, they can make them work sufficiently. And in many cases they can put out great work with them…but they can’t make great money with them. T&S sells efficiency. We have chosen to build machines that improve your work flow. We have focused on a few pieces of equipment, that if taken advantage of, should never cost you money (assuming your shop is busy). You get the work in the door and we will help you get it out!
• Deluxe model built specifically for crankshafts
BlockMaster • Probe, Bore & Deck in 20 minutes! • Probe every block, no saved programs • G-Code capable for production parts
940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools 17
BLOCKMASTER CNC BLOCK MACHINING SYSTEM Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks. Since you just decked it, go ahead and O-Ring the deck since we have the operation saved. We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining! Anyone with engine building knowledge can run the BlockMaster after a couple of days with the included factory training in your shop.
This is a couple of hours work on the BlockMaster 18
TRADER MAGAZINE Fall 2020 trader-mag.com
You can also make these with the BlockMaster!
PROBAL 500 DELUXE CRANKSHAFT BALANCER You might ask, “Maybe there is a ‘better’ system out there?”, we don’t believe so! T&S has invested heavily in building the quickest, most sensitive and accurate balancing software available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual balance achieved. A more sophisticated balancing software does not exist, and we can prove it. T&S uses the same system for balancing turbocharger rotors as for 15,000 lb electric motor armatures and GM locomotive crankshafts that are twenty feet long. Even those extremely large parts have only a six second sample time! T&S does not just offer an attachment to drill for heavy metal, we build the heavy metal stand into the base of the machine. We knew we were going to balance crankshafts when we built it so we held a crankshaft up in the air and built the ultimate machine around it. We include all necessary accessories with the machine. And we do this all for less than any of our competitors. As an added bonus our PB500 has the smallest footprint of any machine in the industry, AND the machine is manufactured right here in the Republic of Texas!
All accessories available
Have an older machine? Call us for a quote on an upgrade!! trader-mag.com Fall 2020 TRADER MAGAZINE
19
Call us Now!
BLOCKMASTER 5 AXIS PORTING FIXTURE
T&S Machines and Tools, Inc.
Finally an affordable 5 axis porting solution! Available as an add on for any T&S BlockMaster. Turn your machine into an all-in-one Block and Porting Machine! Take control of cylinder head port design in your own shop.
$155,000 package includes:
Ready to run programs for 2 Cylinder Heads (with fixtures) Lollipop tool w/shrink fit holder Chamfer Tool Engraving Tool (1) 1/2" EM Factory training at T&S Facility
20
TRADER MAGAZINE Fall 2020 trader-mag.com
940-668-1002
We use the latest Reverse-Engineering technology for digitizing your ports. Digitizing and programming can be provided as a service or get your own complete software and hardware package if you choose to bring the entire process in-house. Have your machine arrive in your facility ready to make chips!
T&S Machines and Tools, Inc. www.tnsmachines.com 940-668-1002
trader-mag.com Fall 2020 TRADER MAGAZINE
21
Seat Chuck
#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)
New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728
*See full advertisement on page 77
22
TRADER MAGAZINE Fall 2020 trader-mag.com
ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!
• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel
Accessories Included
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23
Top Load Rotary Table Washer
The Gladiator TRT www.joebakerequipsales.com
Manufactured by FMT
The Gladiator TRT washers are designed for low-volume, batch parts cleaning.The Gladiator TRT washers offer a space-saving, cost-effective solution to your industrial parts cleaning needs. 24
TRADER MAGAZINE Fall 2020 trader-mag.com
Bob Weight Cards - 100 cards per pad, perforated - Part# BW-5099C $30.00
trader-mag.com Fall 2020 TRADER MAGAZINE
25
the engine Professional Podcast, hosted by aera staffers steve fox and chuck Lynch, will cover engine-related technical information and machining procedures, as well as feature guest hosts to share their knowledge. in the first episode, steve and chuck introduce themselves and give an overview of aera and all the benefits for members. now streaming on apple, google, spotify, stitcher, Deezer, android — check it out:
podcast.engineprofessional.com THE SOURCE FOR INFORMATION 875 f einberg cour t, s uite 106, ca r y , i L 60013 P ho ne 888-326-237 2 or 815- 526- 7600 fax 888-329-2372 or 815-526-7601 • www.aera.org
26
TRADER MAGAZINE Fall 2020 trader-mag.com
THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs! Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
trader-mag.com Fall 2020 TRADER MAGAZINE
27
28
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
29
PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.
The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30
TRADER MAGAZINE Fall 2020 trader-mag.com
Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle
Handheld Polisher A Must Have!
This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.
Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
31 31
JACK SCHOLLER EQUIPMENT USED EQUIPMENT CRANKSHAFT GRINDERS Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment, including.............................................$10,000.00 4-Wheels & Hubs..................................................................................................................................................................... Berco Hubs for 225 & 270................................................................................................................................................$275.00 GUIDE & SEAT MACHINES Rottler SG7 Guide & Seat Machine............................................................................................................................$17,500.00 Serdi 60 Guide & Seat Machine - Well Tooled...........................................................................................................$17,500.00 Peterson TCM25V Guide & Seat - Variable Speed, Power Column, Well Tooled.......................................................$9,500.00 Sunnen HS30 Guide & Seat Machine - Well Tooled.....................................................................................................$5,500.00 Winona PH2000 Guide & Seat Machine.......................................................................................................................$3,000.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture............................................................................$4,000.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture.............................................................................$5,500.00 Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture......................................................$6,500.00 DCM HMC2000 Guide & Seat Machine........................................................................................................................$6,500.00 PRESSURE TESTERS Master Tool Pressure Tester - 38”................................................................................................................................$3,500.00 Peterson PT38 Pressure Tester....................................................................................................................................$3,500.00 Master Tool Head Oven.................................................................................................................................................$1,000.00 VALVE GRINDERS Winona 860900 Valve Grinder.......................................................................................................................................$3,500.00 Kwik-Way SVS Valve Grinder with Collett Chuck........................................................................................................$4,500.00 Sioux 2075 Valve Grinder with Collet Chuck................................................................................................................$4,500.00 Sioux 2001 Valve Grinder with Collet Chuck................................................................................................................$4,500.00 Carmac RV3000 Centerless Valve Grinder..................................................................................................................$4,500.00 SURFACE MACHINES Serdi MGM 1000 Surfacer with CBN..........................................................................................................................$10,500.00 Storm Vulcan 85EL Surfacer.........................................................................................................................................$5,500.00 Van Norman 570 Broach...............................................................................................................................................$2,500.00 Storm Vulcan 85B..........................................................................................................................................................$4,500.00 Storm Vulcan 850 Mill....................................................................................................................................................$2,500.00 Winona Van Norman SN74000D Surfacer - New CBN 14” Hub................................................................................$13,500.00 Storm Vulcan 85B with Variable Speed........................................................................................................................$4,500.00 ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen LBB1710 Power Stroke Rod Hone..................................................................................................................$2,750.00 Sunnen 1699 Rod Hone................................................................................................................................................$2,500.00 Sunnen 1499 Rod Hone................................................................................................................................................$2,000.00 Sunnen CRG750 Cap Grinder.......................................................................................................................................$1,000.00 Sunnen 1299 Rod Hone................................................................................................................................................$1,000.00 Sunnen CRH-50 Connecting Rod Heater........................................................................................................................$750.00
Office: 704-871-1951 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 32
TRADER MAGAZINE Fall 2020 trader-mag.com
245 South Oakland Avenue • Statesville, North Carolina 28677 CYLINDER HONE - LINE HONE Sunnen CV-616 Cylinder Hone...................................................................................................................................$13,500.00 Sunnen CH100 Line Hone with 2400 Mandral...........................................................................................................$10,500.00 Sunnen Line Hone Mandral - 15RY4500......................................................................................................................$2,000.00 FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder..................................................................................................................................$5,500.00 Winona FG5000 Flywheel Grinder................................................................................................................................$5,000.00 DCM Flywheel Grinder..................................................................................................................................................$4,500.00 BORING BARS Scledum 2500 Line Boring - W/(2) 50 MM & (1) 30 MM Bars,Standard Equipment.................................................$10,500.00 Rottler FA24AB Boring Bar...........................................................................................................................................$8,500.00 Berco ACP 151 A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures Tool Sharpener, Standard Tooling...........................................................................................................................$7,500.00 Kwik-Way FL Boring Bar with Standard Tooling & Tool Box.......................................................................................$4,500.00 Kwik-Way FN Boring Bar with Standard Tooling & Tool Box.......................................................................................$5,500.00 Waida 01 Boring Bar with Tool Box..............................................................................................................................$1,800.00 Rottler F2B Boring Bar, 45 & 30 Degree Fixture, Tool Sharpener, Standard Tooling..................................................$7,500.00 Rottler F2B Boring Bar..................................................................................................................................................$7,500.00 CLEANING EQUIPMENT Bayco Oven BB-12........................................................................................................................................................$3,500.00 Peterson BK17 Oven.....................................................................................................................................................$1,500.00 Goff Bayco Cleaning System - Oven - Steel Shot - Shaker........................................................................................$7,500.00 Kansas Instruments 502B Steel Shot Machine............................................................................................................$3,500.00 Ampro PB230 HVD Oven, Blaster, Tumbler..................................................................................................................$6,500.00 MISCELLANEOUS Nugier 100 Ton Press....................................................................................................................................................$7,500.00 Alliant Mill......................................................................................................................................................................$3,500.00 Magnaflux - 60”.............................................................................................................................................................$6,500.00 Sunnen TS100 Tool Sharpener........................................................................................................................................$950.00 Kalamazoo Band Saw...................................................................................................................................................$1,500.00 Kent Moore Press.............................................................................................................................................................$250.00 Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes............................................................................................ Call for Price 6 - Air Compressors................................................................................................................................................ Call for Price New Dowell Pin Puller Set................................................................................................................................................$175.00 New Piston Pin R & R Set................................................................................................................................................$175.00 New Sioux Tapered Pilots..................................................................................................................................................$37.50 Diamond Flywheel Stones...............................................................................................................................................$175.00 New - Portable Crankshaft Polisher................................................................................................................................$795.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”..........................................................................................................$9.25 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”..................................................................................................$10.00 Sioux Seat Grinding Stones 2” through 2-1/2”.................................................................................................................$11.00 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”..........................................................................................................$19.50 Kwik-Way Seat Grinding Stones..............................................................................................Same Sizes and Prices as Sioux Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series................................................................................... Call for Price
email: jackschollerequip@att.net email: jackschollerequipment@roadrunner.com
www.jackschollerequipment.com trader-mag.com Fall 2020 TRADER MAGAZINE
33
Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing. Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments. Works great will all degree wheels through 16” or larger depending on the mounting hole.
3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495
18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings. Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
34
TRADER MAGAZINE Fall 2020 trader-mag.com
Innovative Machine and Supply, Inc. 345 Sun Valley Circle Fenton MO 63026 Local 636-600-1171 • Fax 636-600-1181
www.innomach.com email scottb@innomach.com
trader-mag.com Fall 2020 TRADER MAGAZINE
35
HIGH PERFORMANCE OFF-ROAD ENGINE BUILDER. HOME OF ULTRA-4, SCORE, AND BEST IN THE DESERT NATIONAL CHAMPIONS. VISIT OUR WEBSITE TO START YOUR ENGINE PROGRAM UTILIZING STATE OF THE ART EQUIPMENT FROM MANUFACTURES SUCH AS: ROTTLER, , NEWEN, SERDI, HINES, ABS PRODUCTS, AND MORE. CHECK US OUT ON INSAGRAM @jeffginterracingengines
36
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
37
Pollution Control Workstations
$7,900
.00
Pollution Control Workstations PCE-4736
47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm. Move up to 2HP, 1100 cfm blower.
Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products. This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.
See More Pollution Control Workstations and many other products: www.youtube.com/absproducts
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38
TRADER MAGAZINE Fall 2020 trader-mag.com
Original Serdi Tooling Largest Selec�on of Cu�er Bits and Blank Sizes Industry’s Best Premium Micro-grain Carbide
New Genera�on Heavy Duty “Flat Top” Style Tooling Larger blanks ¨ More re-sharps ¨ Lower Cu�ng Forces ¨ Longer Life Posi�ve & Nega�ve Geometry ¨
¨
Posi�ve Geometry for Hard Seat Materials
Single Angle Indexable “Tri-Tools”
The Serdi Legacy! Machines & Tooling
trader-mag.com Fall 2020 TRADER MAGAZINE
39
Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders! PowerPeen 6048
We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in. They are stripped down to remove paint and magnafluxed, Gary’s shop does it all. He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers. Shot peening, plastic media, glass bead, all runs through this versatile production quality machine. If you run a large production shop like Gary’s we have the custom blasting machines you need.
This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!! Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
40
TRADER MAGAZINE Fall 2020 trader-mag.com
Excellent maching for shot peening cranks! In fact that’s what we designed it for!
The welded steel tubing that works as an engine mount Lycoming prop engine.
Lycoming prop engine cases on turntable and dolly system, entering the blaster.
Nozzles for shot peening, blasting and plastic media! • A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle
214-388-0603
Each nozzle: $250.00 Full set: $1250.00 trader-mag.com Fall 2020 TRADER MAGAZINE
41
THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!
CH-1 Crank Rack
CH-1 Crank Rack with optional top, V-blocks and one cam hanger.
CH-2 Double Crank Rack
CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level. Each level holds between 20-24 cranks depending upon the model.
ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00
Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory. This is a rack for every crank.
SAVE MONEY AND FLOOR SPACE!
2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack
591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts
42
TRADER MAGAZINE Fall 2020 trader-mag.com
System on Best Storage the market!
Can Be Arbors perately! e S Bought
Mill Mounted Drilling Platform
ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)
ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments
Drilling Platforms for Hines & Winona Balancers
$149.00
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
ABS-Products.com Call 714-671-0728
Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert. Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.) CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack. CR-ES-3 ............................................................................. $95.00
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.
Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Fall 2020 TRADER MAGAZINE
43
3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package. Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.
Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles
591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44
TRADER MAGAZINE Fall 2020 trader-mag.com
5.0 CRANK&CAM POLISHER
Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.
////////////////////////////////////////////////////// Please contact us for a spec sheet and pricing.
Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
Camshaft Polisher 45
The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.
Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal
591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 46
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
47
ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.
Attached Dust Collector
FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48
TRADER MAGAZINE Fall 2020 trader-mag.com
BY ABS
Built for PERFECTION E n g i n e B u i ld i n g To o l s
Piston Deck Height Bridge
Piston Ring Squaring Tool
Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.
Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps. Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get past head bolt distortion. Longer (3”) legs available if desired. • No wrenches required • Change bore sizes in seconds!
Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts
For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators. Fits most milling machines.
trader-mag.com Fall 2020 TRADER MAGAZINE 49
Shop Equipment for Sale:
Custom Steel Boxes
2: CRG-500 cap grinders/ 3: Sunnen rod hones RTM Berco 225 crankshaft grinder reconditioned & aligned................................................ $8000
We make standard and custom Hand Held Tool Boxes, Metal Cases, Totes, Courier Boxes, Lock Boxes, Cantilever Boxes, Garage and Shop Organizers. Contact us to see how we can help you with your steel box needs. Don’t forget to ask about our inventory of seconds and overstock. All made right here in America.
Storm Vulcan Crankshaft Welder.............................. Best Offer Ampro thermal cleaning system. The smaller system will do a 350 chevy block.......................................... $3000 Van Norman 400 crankshaft grinder............................ $4800
PioneerSteelUSA.com 714 255-0526
Sunnen CRG 750 cap grinder....................................... $1050 Storm Vulcan 15 crankshaft with centers and related equipment.......................................... Best Offer Kwik-Way seat grinding and VS valve grinder.................................................. $1000
_______________________________________________
Kwikway Boring Bars:
475 Van Norman late model hydraulic machine parts and 438 Van Norman base & table........................ Best Offer
Norum Equipment
Ferndale, Michigan Adney Brown 586-549-7557
FWII, FN, and FL’s outright or exchange.
Refurbished Kwikway Boring Bars models FWSII, 40 years with Kwikway. Call Dick Norum 715-689-2882 or dick@norumequipment.com
_______________________________________________ _______________________________________________
Shop for Sale: Auto dynamic balancing and engine rebuilding. Doing business in Baldwin Park, California since 1959. Work year-round. Selling the business w/ all machines, equipment and customer list.......................................... $90K
Marketing Materials: Need an ad or logo? Catalog or marketing materials? Call 714-447-0167 or email: dan@DGVC.net www.DGVC.net
Rod Philips Auto Dynamic Balancing 626-962-9135
Advertise now in the Trader Classifieds Call: 714/ 671-0217 50
TRADER MAGAZINE Fall 2020 trader-mag.com
www.trader-mag.com
trader-mag.com Spring 2020 TRADER MAGAZINE
51
03TT_20ArmaKleen50.qxp 2/13/20 2:35 PM Page 1
LEADER
The
...in aqueous parts cleaning
Professional Racers Turn to ArmaKleen
ARMAKLEEN™ supplies only the highest quality environmentally sensible aqueous parts cleaning formulas and paint removing chemicals. Our innovative, patented cleaners are rigorously tested and designed for use in almost all commercial and industrial parts cleaning applications
™
ArmaKleen.com
52
& ArmaKleen.com/Ask-Andy
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
53
N-200 Stage II Soda Blaster Using GhostFlow™ Technology
STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System
The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes. This allows the user to operate longer hours and access other part handling options important to soda blasting applications. This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals. The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production. Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology. (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
54
TRADER MAGAZINE Fall 2020 trader-mag.com
Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head! 1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable
714-671-0728 abs-products.com
RPM
Equipment Sales Jupiter Florida
Provider of High quality new & used engine rebuilding equipment. We Export!
VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00
VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00
Ralph Nettles
ralphnettles@msn.com
561-906-2827
Warehouse Location 380 NW 144th Drive Okeechobee Fl. 34972
rpmequipmentsales.com trader-mag.com Fall 2020 TRADER MAGAZINE
55
06EB_19JoeBaker50.qxp 6/4/19 3:29 PM Page 1
56
TRADER MAGAZINE Fall 2020 trader-mag.com
COBRA STAGE I SODA BLAST CABINET
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Fall 2020 TRADER MAGAZINE
57
EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH
58
CONVERSION CHART OUNCES TO GRAMS
TUNGSTEN
STEEL
NET GAIN
7/16" x .875" 1/2" x .750"
38 43
17 19
1/2" x 1.000" 1/2" x 1.200"
57 65
1/2" x 1.250" 5/8" x 1.000"
OZ
GRAMS
21 24
1/16
=
1.77
1/8
=
3.54
25 30
32 35
3/16 1/4
= =
5.31 7.08
72 91
31 39
41 52
5/16 3/8
= =
8.85 10.62
5/8" x 1.200"
109
47
62
5/8" x 1.250"
114
49
65
3/4" x 1.000"
122
56
66
3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700" 7/8" x 0.750"
147 162 87 117 127
67 70 38 54 58
80 92 49 63 69
7/16 1/2 9/16 5/8 11/16
= = = = =
12.39 14.16 15.63 17.70 19.47
7/8" x 1.000" 7/8" x 1.100"
169 186
77 85
92 101
7/8" x 1.200"
198
92
106
7/8" x 1.250"
210
96
114
1" x 0.500"
111
50
1" x 0.700"
153
70
1" x 0.750" 1" x 0.850"
164 190
1" x 1.000"
3/4
=
21.24
13/16
=
23.04
7/8
=
24.78
61
15/16 1 2 3 4
= = = = =
26.55 28.35 56.70 85.05 113.40
83
5
=
141.75
75 85
89 105
6
=
170.10
227
100
127
1" x 1.100"
243
110
133
1" x 1.200"
265
120
145
1" x 1.250"
275
125
150
1-1/8" x 1.000"
282
127
155
1-1/8" x 1.200"
325
153
172
1-1/8" x 1.250"
350
160
190
1-1/4" x 1.000"
346
157
189
7 8 9 10 11 12 13 14 15
= = = = = = = = =
198.45 226.80 255.15 283.50 311.85 340.20 368.55 396.90 425.25
1-1/4" x 1.200"
418
189
229
16
=
453.60
1-1/4" x 1.250"
445
196
249
1-3/8" x 0.750"
328
142
186
1-3/8" x 1.250"
543
237
306
1-1/2" x .600"
304
135
169
1-1/2" x 1.000"
504
226
278
1-1/2" x 1.250"
635
283
352
TRADER MAGAZINE Fall 2020 trader-mag.com
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
Mention This Ad For A Special Discount
Balancing Slugs, Pins, Plates & Bars
Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.
Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com Fall 2020 TRADER MAGAZINE
59
Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal tungsten checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel
Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00
R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price
Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed. Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00
60
TRADER MAGAZINE Fall 2020 trader-mag.com
714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts
trader-mag.com Fall 2020 TRADER MAGAZINE
61
Blizzard Stage III Soda Blaster Using GhostFlow™ Technology
Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls. Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged. 95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.
STANDARD MACHINE FEATURES
• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System
(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts
62
TRADER MAGAZINE Fall 2020 trader-mag.com
ARMEX
TM
The Original Soda Blasting Abrasive
The first time that baking soda was used for abrasive blasting was during the 100-year restoration of the Statue of Liberty The challenge was to remove two layers of coal tar epoxy coatings without
BENEFITS OF SODA BLASTING - Aggressive cleaning ability - Surface preservation
damaging Lady Liberty’s delicate copper skin. The aggressive cleaning
- Environmentally friendly
ability and surface preservation characteristics of baking soda is what
- Non-hazardous
made it the only choice. Church & Dwight, makers of ARM & HAMMER™ products since 1846, worked closely with the project engineers and
- No free silica or toxic fumes
donated 200,000 pounds of baking soda. Following this success Church
- Nonflammable & non-sparking
& Dwight launched ARMEX, the first baking soda abrasive specifically formulated and manufactured for abrasive blasting in 1989.
- Water soluble - Used at low air pressures 40 - 80 PSI
To learn more about ARMEX or to schedule a cleaning trial visit www.armex.com
- Can be used for wet or dry blasting
THE SODA BLASTING EXPERTS Pantone 2758 C
ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc.
trader-mag.com Fall 2020 TRADER MAGAZINE
63
$190.00
We sell these to work with a 5˝ or 6˝ Starret Indicator. You buy your own indicator and we provide the mounting bracket! 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
64
TRADER MAGAZINE Fall 2020 trader-mag.com
Get Abrasive! ABS Blasting Media Abrasives for all Applications.
Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock. Give us a call to discuss which abrasive will work best with your application and machine. BAKING SODA PLASTIC MEDIA
STEEL GRIT
ALUMINUM OXIDE
STEEL SHOT
(714)671-0728 ABS-Products.com info@ abs-products.com youtube.com/absproducts sales@abs-products.com
GLASS BEADS
trader-mag.com Fall 2020 TRADER MAGAZINE
65
66
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
67
68
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE 69
70
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
71
Update your Piston Ring Grinder to an ABS Ring Grinder!
START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs. We have what you need for any type of ring! Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00
New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea. New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea. New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00
591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts
72
TRADER MAGAZINE Fall 2020 trader-mag.com
STANDING ON THE GAS SINCE 1963. Mickey Thompson was unstoppable. He was the first American to 400+MPH at Bonneville & the manager of Lions Drag Strip. At heart, Mickey was a drag racer, now his DNA lives on in the innovative winning products we build today while we continue to break records in professional drag categories. UNCOMPROMISED CONSTRUCTION / UNDISPUTED PERFORMANCE. #MICKEYTHOMPSONTIRES M/T PROUDLY MAKES TIRES IN THE USA.
MICKEYTHOMPSONTIRES.COM trader-mag.com Fall 2020 TRADER MAGAZINE
73
74
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
75
76
TRADER MAGAZINE Fall 2020 trader-mag.com
trader-mag.com Fall 2020 TRADER MAGAZINE
77
Simple. Fast. Competitive. Rottler’s Cylinder Head Machining Equipment is so advanced that even the most complex operations can be programmed and executed quickly, accurately and reliably. For surfacing, seat and guide installation and cutting and valve refacing procedures, only Rottler has the cutting edge you need to maximize performance and profitability.
Rottler’s surfacing machines are the fastest machine for surfacing heads, blocks and manifolds. Designed with the latest CNC technology and proven designs found in Rottler CNC machining centers! Handles the smallest parts to large diesel cylinder heads.
Rottler MANUALMATIC control has revolutionized valve seat cutting! During seat cutting, the operator does not have to operate any buttons, switches or pedals, simply turn the spindle feed handwheel up and down and the MANUALMATIC control takes care of all the functions
THE CUTTING EDGE 78
TRADER MAGAZINE Fall 2020 trader-mag.com
Rottler's centerless grinding valve refacing machine is designed to grind a set of valves to equal length from stem/butt end to valve seat. The Rottler Centerless System allows a wide range of valve stem diameters to be ground without changing any collets or chucks.
8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050
1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc
3 YEAR WARRANTY GUARANTEED PRODUCTIVITY
CNC AUTOMATIC HONING
Special optional software packages allow: VARIABLE SURFACE FINISH from top ring area and lower bore area. Precision honing of “THIN WALL” cylinders such as CGI Engine Blocks and Motorcycle Cylinders. • Completely Unattended Automatic Hole-to-Hole Operation • Crash Protection prevents damage to tooling • Ease of programming – only 3 screens for a new block • Accuracy of size and surface finish including Rk parameters • Ease of Maintenance – roll out coolant tank with 3 stage magnetic filtering • Dual Stage and Multi Stone Holder Hone Heads available • Quick Change Hone Head System • Quick Size Calibration System • Reverse Rotation allows perfection of Surface Finish Today’s high performance piston rings require precise surface finishes, for reduced friction and a perfect seal. Rk, Rpk & Rvk parameters are the latest in measuring technology to achieve the results necessary for today’s high performance rings. The Rottler CNC Honing Machines utilize advanced CNC control and super abrasives to give the cylinder bore surface finish results that we require – every time! Rottler Honing Expertise is up to date with the latest technology, and they are always there to help with questions – fast!!
Used by Professionals such as RoushYates NASCAR and BES Racing to save time and improve bore finish.
– Keith Jones Total Seal Piston Rings Phoenix, Arizona
THE CUTTING EDGE 8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050
1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc
1-800-452-0534 www.rottlermfg.com 79
RACE TO WIN WITH ROTTLER FAST. ACCURATE. EASY TO RUN.
LESS TIME PROGRAMMING. MORE TIME WINNING.
EM69P
ROTTLER MFG.COM 80
TRADER MAGAZINE Fall 2020 trader-mag.com
1-800- 452-0534