Specification Magazine June 2016

SMARTPLY

SAM Trimax won’t expand. Even when wet.

E

ducation, education, education has long been regarded as a priority for successive governments.

But the bold political promises have not always been backed by money, money, money - at least, not the type of investment that the sector has required.

Our spotlight on Education this month shows that progress is now being made. Indeed, the latest survey of the sector by Glenigan shows that universities now appear to have renewed confidence in their funding and are pressing ahead with planned schemes.

However, the expectations of Glenigan’s analysts are less positive for work on the UK’s state schools which account for the majority of work in the sector. It has forecast a lack of growth in starts up until the end of 2016.

Despite both a positive backdrop for university construction and demographic trends requiring investment into the schools estate, Glenigan is forecasting starts for 2016 to be flat. Flagship government spending programmes have disappointed over the last two years, and Glenigan predicts the gap between required and actual construction investment to persist.

Several universities have plans for entirely new campuses; while these are currently at early stages of development they signal the ambition of some universities and suggest that higher education institutions will remain an important driver of construction spend in the longer term. Glenigan’s expectations are less positive for work on the UK’s state schools, which account for the majority of work in the sector.

Education, education, education still requires investment, investment, investment if the political rhetoric is to be transformed into the type of world class system the country requires.

Welcome haddonstone.com 01604 770711

SpecMag-B-90x260.indd 1 2/14/2014 10:01:00 AM

Modular Building

At FP McCann, we believe in working with you as a partner from the start, which means offering our expertise in designing and manufacturing rooms to suit every individual project. Far from being an off-the-shelf solution, our modular building solutions are made-to-measure, whilst maintaining our design philosophies and standard details.

Our precast concrete crosswall construction is a fast and convenient way to produce multi-unit structures such as hotels, education, student, secure and health accommodation, private and social housing in a fraction of the time of traditionally built structures.

The A. Proctor Group developed Roofshield 20 years ago in response to problems caused by the requirements of the UK’s demand for cold-pitched roof construction, and the drive towards ever increasing thermal performance requirements. Today, trusted by architects, developers and contractors, the Roofshield brand is synonymous with the highest quality, providing a pitched roof underlay, which is both air and vapour permeable.

Thirty buildings compete for new international prize

These will be whittled down to 20 of the best buildings, after which six finalists will be chosen and visited by the Grand Jury this autumn. Setting a new global standard for architectural achievement, the prize will be judged by an expert panel led by world-renowned architect, Richard Rogers.

RIBA President, Jane Duncan commented: “It will be fascinating to see insights from the judges and entrants into the power and value of great architecture, wherever you are in the world.”

BIM for Landscape is published

BIM for Landscape, the first book of its kind to focus on the implementation of Building Information Modelling (BIM) processes in landscape and the external environment, has been published.

The book is intended to prepare practitioners and landscape architecture practices to meet the challenges and benefit from the rewards of working with BIM.

Mike Shilton, chair of Landscape Institute’s BIM working group, said: “Conversion to BIM enabled platforms from current practices may incur additional expenses and training but if a competitor is delivering projects more efficiently, on time and to budget by implementing BIM processes, and clients’ are achieving the targeted 20% savings BIM can deliver, it may become more difficult for you to compete.”

Sharp rise in construction project starting on

Overall the value of work starting on site in the three months to April was 23% up on the same period of a year ago, according to the latest Glenigan Index.

This is a marked improvement on both the preceding three months and the same period in 2015, when the flow of project starts was disrupted ahead of the General Election.

Commenting on this month’s figures, Allan Wilén, Glenigan’s Economics Director, said: “The rise in starts during the three months to April is welcome news. It is particularly encouraging that the pick-up in project starts has been broadly based across all construction sectors, including a sharp rebound in civil engineering work.

“Furthermore the development pipeline remains firm, despite a recent dip planning approvals that is mainly attributable to fewer public sector projects. Overall the value of planning approvals during the 12 months to April was 3% up on the preceding period. The development pipelines of private housing, industrial and office projects are particularly strong.

“Near term we anticipate that investor nerves may dampen the current upturn in project starts ahead of June’s EU referendum. Nevertheless we anticipate that there will be a rise in projects going out to tender over the coming months as clients’ line up work to start in the second half of the year.

“Accordingly while the impending vote may dampen project starts in the near term, the second half of 2016 could see a sharp rise in activity as private investors press ahead with projects once the issue of EU membership has been resolved.”

The current rise in project starts has also been broadly based across the UK. Those areas worst affected by flooding and water logged ground at the turn on the year have seen the sharpest turnaround in project starts. The North East, North West, West Midlands East of England and Scotland all saw sharp increases in the value of projects starting on site during the three months to April against the preceding three months.

Aperio at the University of Birmingham

A student residence at The University of Birmingham has been supplied with the Aperio wireless locking solution by ASSA ABLOY Access Control, a UK division of ASSA ABLOY, the global leader in door opening solutions.

Chamberlain, based in Edgbaston, is a brand new student accommodation development comprised of a 21-storey tower and three low-rise blocks.

The student rooms have been fitted with the Aperio solution, which is fully integrated into the Gallagher Command Centre, which is an industry leading critical business platform, delivering organisational security and operational continuity.

Clever, original and inventive. This is an exciting time for building design and construction. And with high performing projects, such as Staffordshire Energy Recovery Facility (pictured), we’re excited to be part of the modern industrial revolution.

As a UK manufacturer with a culture of innovation we’re continually developing and refining our roof and wall products to meet the changing and challenging design and project management requirements facing today’s construction professionals.

Our Elite Systems provide a complete package with a range of external profiles and a choice of colours and finishes. They are available with a system guarantee of up to 25 years and combine exceptional thermal and acoustic efficiency with trusted fire performance and minimal environmental impact. Elite Systems are also convenient, helping to meet demanding build times with speedy installation and providing all relevant system components to site in the same delivery.

A culture of ingenuity is present throughout our supply chain, with Elite Systems using only Colorcoat HPS200 Ultra® and Colorcoat Prisma® pre-finished steel from Tata Steel. These Colorcoat® products come with the Confidex® Guarantee for the weatherside of industrial and commercial buildings, offering extended cover for up to 40 years. Colorcoat ® products are certified to BES 6001 Responsible Sourcing standard.

If you‘re looking for genuine ingenuity, discover Elite Systems.

Colorcoat HPS200 Ultra, Colorcoat Prisma and Confidex are registered trademarks of Tata Steel UK Limited.

Elite

High performance foam tapes from ISO-CHEMIE have been specified for improved all round sealing at a stunning new private house near Fareham on the Hampshire coast.

Villa Aalto, designed by architect Carl Leroy Smith, will benefit from ISO-CHEMIE BLOCO 600 tapes to provide a highly effective sealing solution with weather protection to over 600pascals, equivalent to force 11 driving rain.

The tape has been installed as an integral part of the Velfac 200 aluminium and wood composite windows’ contemporary styling.

Programme for Construction Industry Summit

is announced.

The 2016 Construction Industry Summit (CIS) Programme has been revealed.

Highlights over the two-day programme include an opening Keynote on the ‘Government Construction Strategy’ by David Hancock, of the Government Construction Team; a Construction Leadership Council Question Time with Ann Bentley of Rider Levitt Bucknall, David Cash of BDP, Mike Putnam of Skanska and Simon Rawlinson of Arcadia; and a comprehensive array of leading industry speakers with presentations titled: Working with the Enemy; Disrupting the Norm; Buying Smart; Smart Cities and Open Data; Delivering the Future and; Innovation in Construction.

The Construction Industry Summit is being put together by the industry for the industry, working with government, to secure a built environment that is fit for the future. The Construction Industry Council, the Strategic Forum for Construction and the Construction Industry Training Board are pleased to come together as lead organisers of the 2016 Construction Industry Summit.

Modern methods of construction embraced by UK house builders

The vast majority of house builders have used or have considered using modern methods of construction (MMC) in the last three years, according to new research from the NHBC Foundation.

The research found that one of the key attractions to MMC is the perceived ability to build more quickly and there is some evidence that MMC can lead to a reduction in costs.

The NHBC Foundation report Modern methods of construction: views from the industry surveys 135 house builders and housing associations and explores attitudes towards MMC. The research captures the degree to which different methods and systems have been adopted and assesses the appetite for more extensive application of specific approaches.

Despite reservations expressed by some, and the lower enthusiasm in the bulk of the industry for the more radical and far reaching manifestations of MMC, house builders have still been making extensive use of a variety of innovative approaches. Most of those surveyed expect the role of MMC to grow (45%) or remain static (51%) over the next 3 years.

Neil Smith, Head of Research and Innovation at NHBC said: “Attention has focused on modern methods of construction many times since the Second World War as a means of boosting housing output and improving the quality of new homes.

“This report shows the high hopes invested in MMC, as a means of delivering transformational change to the housebuilding industry, have not yet been realised on the scale anticipated by its champions. It also illustrates that although cautious about over- commitment, the industry is nevertheless embracing MMC in many guises, and stands ready to explore new options and innovations.”

Mike Quinton, NHBC Chief Executive said: “It’s clear that MMC has an increasing role to play in boosting growth in UK house building. NHBC’s technical teams have decades of experience of working with the industry and we have already provided warranties for a variety of innovative approaches. We are keen to contribute our expertise to developing new ways of building quality new homes to the highest standards.”

Thomas Dudley launches Kinetic flushing control

Thomas Dudley Ltd has launched Kinetic - an intelligent water-saving ‘all-in-one’ electronic urinal control, offering quick and easy installation.

Kinetic is stylish and aesthetically pleasing to the eye, suitable for any washroom environment and offers a choice to be installed onto pipework, wall or ceiling.

The contemporary urinal flushing valve has been designed to save up to 80% of water in comparison with traditional petcock and automatic cistern installations.

It will be available in both glossy white and grey finishes. It can be powered by mains or battery and is suitable for water pressures of 0.1 – 10 bar.

Villa seals it with high performance tape

EyeNut delivers lighting solution for university

Annual energy costs for the Further and Higher Education (FHE) sector are estimated to be around £400 million each year, resulting in annual CO2 emissions of around 3 million tonnes.

Oxford Brookes University sought out the latest innovations from the lighting industry and the stand-out solution was EyeNut, an innovative control, monitoring and management system from the world leader in the design and development of wireless lighting solutions, Harvard Technology.

EyeNut has many advantages over early generation lighting controls and Oxford Brookes was impressed with its overall costs, ease of installation which reduced on-site commissioning times, long-term maintenance savings. Also, it is both easy and cost effective to add more buildings, across multiple sites, to the EyeNut platform by adding gateways. You can control up to 500 EyeNut-enabled devices from just one gateway.

Financial savings also exceeded expectations with an overall reduction in lighting costs approaching 50% from the technologically advanced solution which is now set to be installed across the estate.

Initially, EyeNut has been rolled out across three buildings, and with new and efficient LED fixtures, achieved savings of 30% through the implementation of control strategies such as daylight dimming and occupancy detection, from a mixture of commercial interior light fittings.

Through the EyeNut system the university is able to monitor and manage interior lighting with multi-site control from a single hub. The performance of the EyeNut system has reassured the university that it can future-proof its lighting requirements by extending use across the estate and continuing its ongoing supportive partnership with Harvard.

Industry urged to incentivise supplychain success

Success must cascade down the UK’s invaluable and innovative supply chain with all project partners better incentivised to deliver ‘shared objectives’, Beth West, Commercial Director of HS2, has told this year’s NEC Users’ Group Seminar.

In her first keynote speech to more than 240 NEC contract users at the Institution of Civil Engineers’ One Great George Street headquarters in London, new NEC Users group Chair Beth called for a widespread cultural change to contractual structures and a greater emphasis on ‘shared success’.

“There is so much more we can do,” she said. “I know of examples of people putting the contract on the shelf once procured. That fills me with horror. We must select contractors on their ability to deliver the project’s strategic objectives, not services alone.

“So many elements of UK Construction are delivered by sub-contractors, many of whom do get squeezed in fixed price contracts.

“We must ensure success cascades down and that full project collaboration is incentivised. We need to share success at a time when we are, as an industry, desperately short of resources.”

The importance of better project collaboration, facilitated by contractual ‘alliances’ of project partners of all tiers which tie all parties to the overall goals of the project, would see more project delivered on time and on budget, the seminar heard.

Beth West’s key note speech was followed by Infrastructure Client Group Alliance of Practice and NEC by Keith Waller, Senior Advisor at HM Treasury and Peter Higgins, NEC Consultant. Andrew Milner, advisory partner at KPMG, then delivered Using NEC for Infrastructure and Construction.

The speaker panel agreed that it is time the fragmented industry focused on developing ‘long term partnerships’ and that contractors must prove they ‘trust the supply chain’ through effective collaboration.

The NEC Users’ Group seminar, which also included a series of interactive workshops, panel sessions and networking opportunities, is the highlight of the NEC calendar and an essential diary date for members and nonmembers who use, or have an interest in NEC3 and its developments.

CIOB

report kick-starts the debate into productivity

Productivity in Construction: Creating a Framework for the Industry to Thrive, is the latest report from the Chartered Institute of Building aimed at kick-starting a wider debate into productivity, looking not just narrowly at construction’s own productivity, but how the built environment supports productivity growth in the UK as a whole.

Commenting on the report Paul Nash, Senior Vice President of the CIOB, said: “Better buildings and infrastructure contribute to productivity not just through their primary function or by increasing economic output.

“By making people happier, safer and healthier, benefits which are often overlooked, the built environment encourages society to be more productive.”

The report uses the Government’s 15-point productivity plan as a framework, illustrating how, point by point, construction acts as an agent of change to improve productivity within the wider economy, how it might improve its own internal productivity, as well as highlighting the opportunities and challenges in delivering improvement.

The report also suggests that current statistical data which measures construction’s productivity can be misleading. When the value of design, the materials and components, and much of the plant and machinery used on site are not counted. It also questions how well the measures we see account for the improvement in quality or, for that matter, fewer site deaths.

Permeable paving – making SuDS work

INNOVATIVE APPLICATIONS OF CONCRETE BLOCK PERMEABLE PAVING HELP MEET REGULATORY REQUIREMENTS WHILE REDUCING COSTS AND LAND-TAKE, REPORTS CONSULTANT TO INTERPAVE CHRIS HODSON.

The National Planning Policy Framework now requires sustainable drainage (SuDS) on new developments of 10 or more dwellings and equivalent non-residential or mixed developments in England.

SuDS are also a firm requirement elsewhere in the UK and local policies are appearing, spelling out what planning and other authorities expect from sustainable drainage on the ground.

By its very nature, concrete block permeable paving is uniquely placed to help meet these multifunctional requirements for SuDS on new developments.

Of course, hard surfaces are necessary anyway – whether for traffic (including HGVs), parking, pedestrians or play – but permeable paving also provides an inherent drainage system, addressing both flooding and pollution issues by attenuating and cleaning water runoff at source. Concrete block permeable paving can simply infiltrate to the ground where conditions allow or, more commonly, collect water for transmission to other SuDS features along the ‘management train’ or to conventional drainage.

No Extra Land-take

After more than two decades of use, concrete block permeable paving has proved to be a predictable, reliable and low-cost SuDS technique. Its capability to attenuate water flow during rainfall for gradual discharge is well known.

But this principle is transformed by considering distinct storage ‘subcatchments’ of permeable paving using straightforward flow control devices with an orifice – accessible for observation and adjustment if needed – on the outlet. This enables water storage to be strategically deployed around a site, with the flow controls demonstrating straightforward compliance to local authorities as part of the SuDS design approval process.

Dedicated water storage on valuable land and associated excavation and construction costs are avoided, and this technique can help satisfy SuDS requirements on high-

density urban schemes without expensive storage structures. It is also useful for controlling flows through the pavement construction, maximising storage on sloping sites and increasing treatment times to optimise removal of pollutants within the paving construction.

Retrofit Overlay Systems

And concrete block permeable paving is being used in other innovative ways too. For example retrofit overlay systems can be applied over existing road bases allowing treated, attenuated water to simply discharge sideways into adjacent rain-gardens or basins.

A real strength of concrete block permeable paving is an ability to remove water-borne pollution offering the important – and often missed – opportunity of a gradual flow of clean water for landscape design and biodiversity. This capability is also central to the role of permeable paving as a source control, passing clean water to open SuDS features such as swales.

Of course, paving will help to define the character of any development and its landscape design. The growing choice of concrete block permeable paving products

available from Interpave manufacturers –with numerous shapes, styles, finishes and colours – allows real design freedom. At the same time, they can provide completely level, well-drained, firm and slip-resistance surfaces that are accessible to all, without the need for cross-falls, channels, gulleys or other interruptions. Rainwater ‘ponding’ is eliminated, reducing the risk of ice forming on the surface and preventing splashing from standing water.

Guidance on SuDS and concrete block permeable paving can be downloaded via the Interpave information resource at: www.paving.org.uk

Interpave – Enquiry 10

Does the industry have the energy for sustainability?

IN THE DRIVE TOWARDS GLOBAL SUSTAINABILITY EVERY ASPECT OF BUILDING DESIGN AND PERFORMANCE HAS COME UNDER THE MICROSCOPE, ESPECIALLY ENERGY CONSUMPTION AND CARBON EMISSIONS. TOM TAYLOR, PRINCIPAL CONSULTANT, SUSTAINABILITY AT BRE, EXPLAINS HOW BREEAM IS TACKLING THE ISSUE.

ccording to the United Nations Environment Programme (UNEP), more than 30 per cent of global greenhouse emissions are buildingsrelated, and emissions could double by 2050 if we carry on business as usual.

The ultimate aim of BREEAM with respect to energy is to help drive reductions in energy consumption and CO2 emissions associated with the built environment. In line with this aim, BRE pledged a commitment ahead of the COP21 climate negotiations in Parts in December 2015 to work with industry to deliver over 9,000 BREEAM certified buildings with predicted emissions savings in excess of 900,000 tonnes of CO by 2020.

Often the forerunner of regulation, and continually challenging the industry to go beyond standard practice and innovate, BREEAM has been driving reductions in building energy consumption and CO2 emissions since the first scheme for new construction was launched in 1990.

The challenge of reducing building energy consumption is not however something that can be achieved solely through good building design as there are many more factors at play. In recognition of this, energy performance is now considered across the full range of BREEAM schemes that cover different stages of a building’s lifecycle.

At design stage, the New Construction scheme builds on regulatory requirements to provide a framework for projects wishing to demonstrate improvements in performance beyond standard practice, whilst encouraging a ‘fabric first’ approach to design through a ‘triple metric’ approach. The triple metric approach introduced in 2011 awards credits based on performance against energy demand and primary energy in addition to the CO2 emissions parameter that has always been assessed. The approach means that in order to score well, designers must first look to make reductions in heating and cooling demand before seeking to meet any remaining demand efficiently, and then offsetting CO2 emissions where possible through the installation of low or zero carbon technologies.

A more recent addition to the BREEAM family, the In-Use scheme considers actual operational performance and is a key part of the BREEAM energy offering in this respect. Real building energy consumption data is compared to building type specific industry benchmarks in order to quantify performance and determine how well a building scores.

Energy performance is a key part of any assessment, but BREEAM also seeks to ensure quality through an accessible, holistic and balanced measure of environmental

impacts. This holistic approach is essential, since this helps to ensure that decisions are not made in isolation without considering all potential impacts.

One of the main aims of the energy strategy moving forward is to strengthen the links between schemes covering different lifecycle stages, with a particular focus on the relationship between the New Construction and In-Use schemes, and associated opportunities for addressing the performance gap.

Changing regulatory requirements will influence the assessment of buildings at the design and construction stage and could mean that there will be very limited scope for requiring performance beyond mandatory minimum standards.

Other external drivers like advances in technology and changes in the design, procurement, construction and management processes will have implications for the delivery of BREEAM as a whole, and in particular the assessment of energy consumption and CO2 emissions.

BREEAM

– Enquiry 12

CPD FOCUS

POLYFLOR REFRESHES VINYL FLOORING CPD OFFERING

Polyflor has announced the launch of three new CPD seminars approved by both the Royal Institute of British Architects (RIBA) and Society of British and International Design (SBID). Polyflor’s CPD offering includes updated sessions on the “Specification of Vinyl Floorcoverings”, “Specification of Safety Vinyl Floorcoverings” and a new seminar about the “Specification of DementiaFriendly Flooring”. The hour long SBID and RIBA approved CPD seminars cover the different types of vinyl floorcovering and their applications, or contact cpd@polyflor.com.

Web: www.polyflor.com Enquiry 15

REYNAERS KICKS OFF NEW PROGRAMME FOR ARCHITECTS

Reynaers has proved its commitment to provide high quality CPD material to architects and specifiers with its new programme, which is independently certified and approved by RIBA and the CPD Certification Service. The latest in the company’s modules of CPD presentations covers sustainability and aluminium systems. The new Reynaers RIBAapproved CPD module is now available to help architects and specifiers develop their knowledge and earn points. The material is exclusive to architects and specifiers and is offered as a 45-minute seminar across the UK. To register go to www. reynaers.co.uk/CPD.

Web: www.reynaers.co.uk Enquiry 16

FACTORY TOURS FORM PART OF CPD PROGRAMME

Following the recent acquisition of EOS Facades by dry construction solutions company Siniat, EOS has announced it will be launching a series of CPD Factory Tour events. These unique CPD events will take place at the company’s site in Newton Aycliffe, County Durham, on: 28 September 2016 –9.00am-12.00pm or 1.00pm-4.00pm; and 29 September 2016 –9.00am-12.00pm or 1.00pm-4.00pm. The Factory Tour and CPD Seminar sessions are completely free of charge with complimentary refreshments throughout the event.To book, simply email Julie.richards@ radar-communications. co.uk with your preferred date and time.

Web: www.eos-facades.co.uk Enquiry 17

Web: ???????????? Enquiry ??

ARMSTRONG CEILINGS PERFORMS A HEALTH CHECK CPD

A health, wellbeing and productivity CPD from Armstrong Ceilings is now RIBA-approved.

Information on the market drivers and impact of building design and construction on occupant health, wellbeing and productivity are contained in a new RIBA-approved CPD from Armstrong Ceilings.

The “Health, Wellbeing and Productivity” CPD meets the RIBA CPD core curriculum subjects of designing and building it (design, construction, technology and engineering) on a general awareness knowledge level.

Designed to explain how to integrate user-centered interior design to positively impact the health, wellbeing and productivity of occupants, the CPD presents the cost to major economies of not getting it right, with acoustics being a major bugbear alongside lighting, air quality, temperature and décor.

Armstrong’s CPD suggests user-centered design as an evolution of conventional design where the project is divided up into small parts, with individual team members only really looking at their own part and not always considering the whole project and how people interact with it. Whereas the user-centred integrated approach is designed by a whole team at the same time so all options can be considered and improved.

It also presents the results of surveys on indoor air quality, where the use of low VOC (Volatile Organic Compounds) materials can improve the environment, and on thermal comfort, where the use of PCM (Phase Change Material) ceilings can optimise the internal temperature of spaces using passive energy-saving materials.

With acoustics being a main irritant, consideration is given to solutions for spaces with varying acoustic requirements, while the part ceilings can play in harvesting natural light is explained as part of improving productive working via enhanced visual comfort.

The CPD also explains how ceilings systems which deliver solutions for a variety of user comforts can also deliver green building credits such as BREEAM, LEED and Ska, with the ability to recycle old ceiling tiles adding further credits in all three schemes.

Case studies also quantify the return on investment for using ceiling solutions to deliver improved wellbeing in education and healthcare environments.

To book the new “Health, Wellbeing and Productivity” CPD please contact Armstrong on Freephone 0800 371 849 or by email at salessupport@armstrong.com

All of Armstrong’s CPDs are available to preview on http://www.armstrong.co.uk/commclgeu/eu1/uk/gb/RIBA_seminars. html?intcid=promo_en-gb_RIBA-SeminarsHP_2014Feb

www.armstrong.co.uk

When quality combines with economy

Whatever the project, you need quality and economy – which makes Schueco aluminium façades, windows and doors ideal for so many different applications. Such as offices and shop fronts, schools and colleges, housing association new-builds and refurbishments.

With energy costs increasing, everybody needs solutions that use good design, excellent engineering and unbeatable thermal insulation to deliver greater comfort and reduced running costs. www.schueco.co.uk

Not all roofing underlays are created equal

FOR YEARS THE DEBATE ON HOW TO ACHIEVE A TRULY VENTILATION FREE COLD PITCHED ROOF HAS CONTINUED ACROSS THE CONSTRUCTION INDUSTRY. NOW, REPUTABLE ROOFING CONTRACTORS AND LEADING HOUSING DEVELOPERS SUCH AS BELLWAY, BOVIS HOMES AND CREST NICHOLSON, BACKED BY THE NHBC, AND INDEPENDENT INDUSTRY RESEARCH, HAVE COME TO THE REALISATION THAT SOME UNDERLAYS PERFORM AT AN EXCEPTIONAL LEVEL, PROVIDING A FAILSAFE OPTION, WITHOUT THE NEED FOR ADDITIONAL VENTILATION.

mproved thermal and moisture performance of pitched roofs

The A. Proctor Group developed Roofshield 20 years ago in response to problems caused by the requirements of the UK’s demand for cold-pitched roof construction, and the drive towards ever increasing thermal performance requirements. Today, trusted by architects, developers and contractors, the Roofshield brand is synonymous with the highest quality, providing a pitched roof underlay, which is both air and vapour permeable.

The combination of cold-pitched roof construction, and increasing thermal performance requirements has fuelled the tendency to place additional insulation above the ceiling joists, leading to an increased risk of condensation in the roof space. In an effort to combat this problem, the industry developed

a series of breathable membranes, which were designed to be installed over the rafters as roof underlay, and allow the vapour to escape.

The majority of these membranes were vapour permeable, but air tight, rather like a Gore-Tex jacket. While water resistant, they did not completely prevent condensation within the roof space, meaning additional ventilation had to be introduced in order to allow air to circulate.

Not all roofing underlays are the same Generally, two types of technological solutions have been presented to specifiers; 1.Vapour permeable, but airtight solutions, based on film laminated polypropylene technology, or 2. A vapour and air permeable version, such as Roofshield, alleviating the need for additional ventilation.

Iain Fairnington, Technical Director of the A. Proctor Group, explains, “Roofing underlays come in all manner of different colours, but it’s what you can’t see that does most of the work – the middle layer. Whilst the colour of the top surface or underside is useful for identification, it is irrelevant in terms of performance. This middle layer can be likened to the same robustness as normal kitchen cling film, and needs the protection of the sandwich construction to make this suitable and fit for purpose in a pitched roof. Taking a microscopic view of the middle layer clarifies the difference between an airtight and air permeable membrane. Fig.1 shows the Roofshield membrane, Fig.2 shows a typical airtight roofing underlay. The difference between air permeability and air tightness is fundamental to the products performance and use.

In a traditional UK cold pitched roof construction, the large cold void above the horizontal insulation requires the quick release of vapour laden air that is reaching its dew point and potentially causing damaging condensation; Roofshield is certified by the BBA and accepted by the NHBC for use without ventilation or a VCL in even these most demanding circumstances. This is particularly advantageous in refurbishment

projects where the installation of the VCL can lead to owners or tenants having to move out if a non-ventilated roof strategy is adopted.”

Independent research and NHBC guidance

Iain Fairnington, explains the building physics around why air tight membranes’ limited vapour permeability means that condensation can still occur: “If you have a big cold roof space, and you have a sudden drop in temperature, you want to have air movement. People assumed that because they were installing a vapour permeable membrane you didn’t need to ventilate your roof, but in certain circumstances moisture levels were too high or temperatures too cold to allow the vapour to permeate without condensing.”

By contrast, Roofshield has a far higher degree of vapour permeability, as well as air permeability, so will still perform in conditions in which air tight alternatives will not. Between 2001-2004 independent research was carried out, conducted on a cross-industry basis with Glasgow Caledonian University. The Partners in Innovation study was necessary, because there was a need for consensus on whether it was still necessary to ventilate buildings where vapour permeable membranes were installed.” says Fairnington.

In fact, the study contained the crucial finding that when a roof was unventilated, and used an air and vapour permeable underlay, such as Roofshield, this would further reduce and inhibit the formation of condensation on the underlay. This contributed to the NHBC making a statement in their Technical Extra bulletin Issue 6 that independently certified air and vapour permeable underlays, such as Roofshield, could be used without additional ridge ventilation in cold roofs.

As Roofshield is accepted by the NHBC without the requirement of ventilation or a VCL, even in cold-pitched roof constructions, the choice of underlay becomes simple. Another independent research report undertaken in 2014 by property consultants Hardies shows that the use of Roofshield without ventilation or a VCL is the most economical choice. When looking for the best vapour permeability, combined with the added benefit of air permeability – Roofshield is the only membrane that meets both these criteria. The evidence is clear for architects, house builders and contractors looking for a failsafe roof that is cost effective, and delivers the highest performance, Roofshield is in a class of its own.

Fig. 2 Airtight Underlay

Fig. 1 Roofshield

OSB provides quality airtight solution for low-energy homes

IF THE UK IS TO MEET ITS TARGET OF AN 80% CUT IN CARBON EMISSIONS BY 2050 WITH ALL NEW HOMES BUILT TO BE ‘ZERO CARBON’, SMARTPLY PROPASSIV WILL PLAY A VITAL ROLE AS PART OF A HIGHLY SUSTAINABLE AND FABRIC FIRST APPROACH.

As the only product recommended by the Passivhaus Institute as a panel system for providing outstanding airtight performance, SMARTPLY PROPASSIV is ideal for ultra-low energy buildings.

The specification of PROPASSIV recently ensured a private two-storey house exceeded Passivhaus levels for airtightness despite taking just over two weeks to build. It was used as the Maidenhead home’s airtight layer and provided the integrated vapour barrier which removed the need for an additional air and vapour control layer (AVCL). With SMARTPLY PROPASSIV having created the perfect insulation envelope, tests showed the completed home achieved 0.55 Air Changes per Hour (ACH), which exceeds the Passivhaus requirement of 0.6 ACH!

In just 19 days the client was presented with a sustainable, low energy house which it’s estimated will result in a 90% reduction in heating demands compared to the average home.

The outstanding level of airtightness is achieved by alternating layers of wood strands coated with a high quality formaldehyde-free resin and wax, coated with a special vapour control barrier, this all ensures a premium performance OSB solution for super-insulated and passive buildings.

The smooth and durable surface has also been developed to provide superior bonding of airtight tape at panel joints. Where AVCL membranes are notoriously difficult to seal, SMARTPLY PROPASSIV offers excellent seal adherence to prevent air leaks, condensation and consequential structural damage.

Manufactured from FSC-certified timber to the specification detailed in BS EN 300:2006, the rigid OSB3 panel is a sustainable, robust and cost-effective alternative to specialist AVCL membranes. With minimal risk of damage during assembly, transport and installation, airtightness should not be compromised thereby ensuring the panel performs as well on the construction site as in factory controlled conditions.

Suitable for both new build and renovation projects, SMARTPLY PROPASSIV is a revolutionary addition to the timber frame industry.

Available in a standard 2397mm x 1197mm size. For more information on the SMARTPLY PROPASSIV panel go to: www.mdfosb.com

SMARTPLY – Enquiry 21

SE Controls helps keep residents safe at Extra Care development

DERBY’S SUNNYFIELD DEVELOPMENT OF 70 SELFCONTAINED ‘EXTRA CARE’ FLATS FOR PEOPLE OVER 60 IS USING A COMBINED SMOKE AND HYBRID NATURAL VENTILATIONS SYSTEM FROM LEADING SPECIALIST, SE CONTROLS, TO HELP KEEP RESIDENTS SAFE IN THE EVENT OF A FIRE WHILE ALSO PROVIDING FRESH AIR TO CORRIDORS AND COMMUNAL SPACES.

The flats are located over three stories plus a lower ground level with access provided by stairwells, lift shafts and a corridor network.

SE Controls upgraded the smoke ventilation equipment with an environmental ventilation system, which is fully automated and provides day to fresh air ventilation to the communal corridors. The system also keeps these areas clear of smoke in the event of a fire when triggered by the network of SHEVTEC controllers and temperature sensors.

While the primary function is to provide essential smoke ventilation, the system’s versatile design enables it to be configured as a natural ventilation solution to provide a supply of fresh air to corridors and communal spaces. This not only allows comfortable temperatures to be maintained and avoid the possibility of overheating during summer months, but also removes stale air from the building to create a better environment.

Throughout the development, the extensive SE Controls system uses an array of sensors, control panels, roof vents and ventilation louvres, located in each corridor, as well as the four stairwells and glazed atrium areas, to ensure that smoke control and fire safety is maintained at all times for residents and staff, should a fire occur.

SE Controls’ Commercial Director, Martin Oates, explained: “There is increasing interest and concern about building overheating, particularly in relation to building air tightness regulations and the effects of climate change and we are already helping address these effects with related technologies to help provide cost effective cooling, ventilation and smoke control solutions.”

Manufacturers are going back to the future

REFURBISHMENT AND RETROFIT REMAINS A STRATEGICALLY IMPORTANT SECTOR. INCREASINGLY, MANUFACTURERS ARE USING PROJECTS THAT BREATHE NEW LIFE INTO OLD

Buildings to showcase some very 21st century products.

Liverpool Philharmonic Hall is an Art Deco wonder. Built in the 1930’s, its structured clean lines encompass interior detail which echoes the elegance of a bygone era.

But the venue is also a thriving contemporary arts and entertainment venue – home to the Royal Liverpool Philharmonic Orchestra and presenting more than 350 concerts and events annually, including music, comedy and film – and therefore opens its doors to all.

So, when it came to a £14.5 million refurbishment, it was vital to fuse functionality with sensitivity within the Grade II* listed building. Improved accessibility needed to be incorporated and the remotely located control box was concealed within the Art Deco fittings. The solution was found in GEZE UK’s TSA 160 UFO automatic under floor operator for swing doors.

GEZE UK was the immediate choice for building contractor Gilbert Ash which had to incorporate the new with the old – a bank of timber-leaved doors with etched glass insets that front the imposing building. The TSA

160 UFO not only powers the heavy doors with ease but has the added bonus of being virtually silent in operation – making them ideal for a building renowned for its acoustic properties.

The doors were designed by Liverpool Philharmonic Hall’s architect Herbert Rowse as one of its many decorative elements. The designs on the etched glass relate to the fluidity of music and the ensemble of instruments that make up the orchestra. However, as manual swing doors incorporating plate glass they could be difficult to manoeuvre for young visitors and those with restricted mobility.

And with close to 1700 people attending performances, the need to provide an automatic alternative was a must to allow visitors ease of access – from front to lobby and lobby to foyer.

In order to fit the under floor operators part of the original stone floor needed to be lifted and carefully reinstated to preserve the authenticity of the Art Deco interior.

The TSA 160 UFO was specified because the operator is fully concealed under the floor allowing the ornate doors to take pride of place. The TSA 160 UFOs are tamper proof, easy to maintain and virtually silent in operation and can operate door leaves of up to 120kg in weight.

Kaz Spiewakowski, managing director of GEZE UK, said: “This is a landmark building in the city and we are very happy that GEZE’s automatic swing door operators could improve the ease and accessibility of this prestigious venue.”

This is a prime example of companies using modern technological advances to create 21st century solutions for older buildings.

GEZE UK

Create a unique ceiling aesthetic with outstanding acoustic control. Perfect for large open spaces with a high level of sound, the new BXD Ceiling System turns noisy environments into spaces with a comfortable acoustic ambiance. Design with panels in varying widths and heights with a choice of finishes and colours to let you perfectly express your design vision.

Take control of your next ceiling project with Hunter Douglas Architectural Projects

Tel: 01604 766251 l Email: info@hunterdouglas.co.uk l www.hunterdouglas.co.uk

And although not all have the immediate architectural appeal of the Liverpool Philharmonic Hall, providing that all-important new lease of life to any building in need of refurbishment is proving a useful showcase for manufacturers.

When Enfield Council Housing decided to modernise and re-roof a series of properties on Church Street, North London, Redland’s SpecMaster service was used to give the houses a high quality roofing solution, backed with a 15-year design liability guarantee.

SpecMaster is Redland’s free-of-charge roof specification service. For Enfield Council, which regularly improves its council housing around the borough, SpecMaster is particularly attractive as it provides specification details for all of the tiles and ancillaries required to complete the entire roofing job.

The recent redevelopments were part of a £2.5 billion regeneration programme taking place throughout the borough in 2015. The use of the SpecMaster service is a result of the positive, long-standing relationship between the council and Redland, as well as a need to guarantee the roofs’ durability for the long term.

The specification called for Redland’s Cambrian Slate in Slate Grey to be used. Manufactured from 60% recycled Welsh slate, Cambrian gives the traditional look of a natural slate while providing the performance benefits, light weight profile and cost effectiveness of a composite alternative.

Specified to match the neighbouring Victorian-era properties, Cambrian is designed to mimic the traditional look of a Welsh slate, a common historic roofing material and a key feature in the regions’ aesthetic vernacular.

Such speciality products are in evidence across all sectors. The exceptional waterproofing and durability properties of Sika-Trocal single ply roofing membrane has proved its worth on a highly challenging project to refurbish a number of roofs at a busy college campus.

MidKent College is one of the largest further education and training providers in the South East with an estimated 8,500 students enrolled at its Maidstone and Medway-based campuses.

With water ponding on the roofs, leading to water ingress, a solution was required. Sika-Trocal S provided the solution. A total of 4,200m2 of 2mm thick Sika-Trocal S was specified by contractor K&S Construction for the project which was carried out during term-time and with minimum disruption to buildings on site.

The application of Sika-Trocal S was designed to minimise the standing water risk and ensure correct falls towards appropriate outlets and hoppers. This was achieved by

over-roofing existing roofs consisting of a number of different bases including felt and asphalt.

Sika-Trocal’s vapour permeable membrane was mechanically fastened at the perimeters and around penetrations using the product’s innovative laminated metal disc system. This system sees the membrane fixed to the roof in a single process, ensuring a fast installation, minimising components required and reducing overall project costs. A 120mm thick, high performance rigid thermoset insulation was also applied to improve the thermal efficiency of the buildings.

In determining the overall look of the practice and its refurbishment Londonbased practice Aura Dental turned to Archiintelligence and international flooring and interiors specialists Gerflor.

Diana Bayliss, Project Co-ordinator, Archiintelligence commented: “The project at Aura Dental was a total refurbishment, the unit was originally a maternity centre which had been empty for a while.

“Our designers specify Gerflor on the majority of our projects due to the range of products available. The majority of our business is in the clinical arena and the product lends itself to this area of our business.”

Redland

Sika-Trocal

Sika-Trocal

X-TWO from Xtralite

The next generation rooflight

X-TWO sets a new standard in PVCu rooflights, featuring innovative interlocking and interchangeable kerbs that can be raised or lowered to any depth. The unique construction used on X-TWO offers a flexible solution with a host of Xtra benefits:

Triple glazed with Ud value of 1.6 W/M2.K

Reduced risk of cold bridging & condensation

Unique mounting systems for easier attachment and installation

Up to 40% more light transmission with vertical kerb option

Increased ventilation levels

Easy opening and increased ventilation control

Available in 4 glazing colour options

Enhanced security options

20 year insurance backed guarantee

X-TWO is offered as a bespoke construction product with a wide range of shapes and sizes available in manual or electrically operated systems.

Call us on 01670 354 157

Or visit xtralite.co.uk

IF YOU DIDN’T KNOW WE WERE HERE TO HELP YOU’D BE GUTTED.

UNIFOLD® from Ampteam. Another clever product designed to protect.

Ampteam have created a family of innovative products that combat the ever increasing deluge of bad weather we have in the UK. A knowledge based organisation with over 100 years of cumulative technical experience our products are manufactured from the highest quality materials, add all this together and that makes Ampteams products the best on the market today.

UNIFOLD®, the superior gutter lining system manufactured from the highest quality materials is guaranteed for 25 years, with a life span in excess of 50 years. Made from EPDM membrane it is manufactured in 2.8 metre lengths that are easily handled so installation is both quick and easy.

UNIFOLD® is installed by a nationwide network of Approved Contractors.

If you’re concerned about the potential damage caused by poor guttering Ampteam will take that worry away with extensive technical advice and expertise, and if required a site survey where our aim is to make sure you are getting the right product doing the right job for a long time to come.

For free technical and friendly advice please call 01384 252777 More technical data and product animations can be found at www.gutterliners.com Alternatively please email us at unifold@ampteam.co.uk

Weatherproof your business once and for all.

Archiintelligence specified some 120m2 of Gerflor’s Creation 55 Luxury Vinyl CLIC System for the vast majority of the practice including; the waiting areas and corridors, together with the reception, two consulting rooms, the main office, numerous cupboards and the dedicated children’s area. Creation 55 was specified for all the toilets.

Designed for medium traffic areas, the Creation 55 is a sophisticated range offering a brand new palette of realistic wood and mineral finishes in tile and plank formats with beveled edges.

In addition to this, the loose-lay CLIC System’s unique vertical interlocking format allows this product to be laid quickly over most existing surfaces, with no need to close premises during refurbishments saving customers time and money. It’s perfect for the retail, hotel, hospitality, administration, leisure or domestic sectors.

But we finish where we began and show how modern solutions help rejuvenate old buildings, albeit this time with a slight twist. Steel windows are a traditional and wellestablished product, yet they have also benefited from advances in manufacturing.

A HQ for Javelin Block, a design and build company, The Compound is a 15,000ft2

refurbished and reimagined former industrial building in the Jewellery Quarter of Birmingham. Central to the success of the design are steel windows and doors forming screens spanning over 15.5m x 5.5m, manufactured, supplied and installed by Steel Window Association member, Monk Metal Windows.

Javelin Block is interested in buildings ‘as found’. The steel frame of the former textile factory was retained while the brickwork was left exposed and the industrial fixtures and fittings were left in place. With the majority of the building an open volume, the steel screens subdivide the inside and ‘outside’ spaces while maintaining the sense of the overall space and the building’s industrial narrative.

Wherever possible, Javelin Block tries to use local craftspeople so, on behalf of the client; BPN Architects contacted the Steel Window Association for details of suppliers and, as a result, selected Monk Metal Windows for the contract. The company is located around six miles from the Compound and helped to design the windows and then worked alongside the contractors on site.

Manufactured from W20 sections, the feature screen includes five double door sets. It was glazed with high-performance 16mm krypton

Gerflor

gas-filled units to demonstrate compliance with current Part L regulations and achieves a centre pane U-value of 1.2W/m2k. The units were hot dip galvanised and polyester powder-coated in RAL 8022 black brown.

Phill Shepherd, associate BPN Architects, comments: “The steel windows provide authenticity and the slim profiles allow for more glass and the very transparent separation we wanted.

“Monk was incredibly open to ideas and they understood what we were seeking to achieve and bought into the project and the design ethos behind it straight away. That relationship has continued onto other projects with the same client. Being an old building, the structure they were fitting the windows into wasn’t plumb so they did fantastically well to set it all out so successfully.”

SWA

Gerflor

Tobermore aid refurbishment of historic pumphouse

TOBERMORE HAS RECENTLY SUPPLIED TRADITIONAL TEGULA BLOCK PAVING AND MANHATTAN PLANK PAVING FOR THE REFURBISHMENT OF THE HISTORIC PUMPHOUSE, LOCATED AT THE INNOVATION QUARTER IN BARRY, SOUTH WALES. THE PUMPHOUSE IS A GRADE II LISTED BUILDING, ORIGINALLY CONSTRUCTED IN THE 1880’S, AND HAS BECOME THE FIRST PURPOSE-BUILT LIVE/WORK FACILITY AT THE HEART OF BARRY’S COMMERCIAL REGENERATION.

Vale of Glamorgan Council worked with DS Properties to develop the site which offers offi ce units, high end shops, restaurants and cafes. The project was funded by the Welsh Government and the Council itself.

The redevelopment plan was designed by Acanthus Holden Architects and the construction works were then carried out by DT Contractors. As part of the redevelopment, the landscape at The Pumphouse has been given a stunning update with the installation of Tobermore’s Tegula block paving in the mellow tones of Bracken and modern Manhattan plank paving in sparkling Silver.

Tegula features an aged, vintage aesthetic appeal and is ideal for creating an antique, rustic look, complementing the ancient structure perfectly.

Manhattan is a linear paving system that has been delicately intertwined with Tegula to create a stylish square border pattern running throughout the landscape design. Manhattan offers a contemporary aesthetic due to the granite aggregate surface layer that produces a look similar to natural granite.

The integration of Manhattan alongside Tegula creates a fabulous blend of modern and traditional product styles.

The Pumphouse previously formed part of Barry’s historic dock complex, providing hydraulic power to operate coal drops, lock gates, swing bridges and other equipment around the docks.

Up until this point, it had been disused for many years but has always remained a local landmark with its imposing 42 metre high chimney, and is one of the few hydraulic Pumphouse buildings remaining in Wales.

Call 0844 800 5736 or visit www.tobermore.co.uk for more information.

Tobermore – Enquiry 27

Everyone wants to work with an expert, which is why Sika Sarnafil is the specifier’s system of choice.

n Sarnafil Plus package to complete the n eeds of all refurbishment projectslarge and small

n Full technical service, bespoke detailed drawings, wind uplift calculations, and r egular installation inspections by our t echnical experts

n C omprehensive condition survey for each ro of project

n A single point guarantee covering against f ailure of design, materials and installation

n The world’s leading single ply manufacturer e stablished over 50 years ago

n BBA Certified life expectancy of ‘ in excess of 40 years’

Leave your project in the expert hands of Sarnafil Plus - so you can specify in full confidence.

Contact us to find out more or for a complimentary roof survey.

SPORTFIX components installed at redeveloped UCC Mardyke Athletics Track, Cork City, Republic of Ireland

EXCESSIVE RAIN WATER HAS TO BE REMOVED QUICKLY AND RELIABLY FROM SPORTS FIELDS AND COMPETITION AREAS. THE SPORTFIX® DRAINAGE CHANNELS AND OTHER COMPONENTS OFFERED BY HAURATON COMPLY WITH THE LATEST STANDARDS AND ALSO MEET IAAF REQUIREMENTS. IT IS ESSENTIAL SPORTS FACILITIES ARE DESIGNED AND EQUIPPED TO PREVENT SERIOUS INJURY TO SPORTS PEOPLE IF FALLS OR ACCIDENTS OCCUR.

The University College Cork (UCC) has redeveloped their Mardyke Athletics Track in Cork City, Republic of Ireland. The new facility is part of a €10 million budget included a new synthetic eight lane, fully floodlit, running track built to the IAAF standard with an additional 3720 m² (40,000 ft²) added to the original arena. The arena now includes an indoor 60 metre running track, a performance analysis suite, two additional gym areas with over 140 additional pieces of the latest gym equipment and three additional fitness studios.

Hauraton SPORTFIX® drainage channels with aluminium finishing edges were installed around the perimeter of the IAAF, 400 metre track and along its straight. A steeple chase water jump kit was also installed plus

Hauraton SPORTFIX® Sand traps and soft edging were installed around the long jump pit.

Tim Connolly, Managing Director of Hauraton Limited points out, “Our SPORTFIX® range offers products that not only meet the requirements of the IAAF for athletic tracks, there are drainage components for artificial turf playing fields, service channels and retractable shafts for cable management with drainage systems for grassed football fields”.

Specification information for the SPORTFIX® range, showing sizing and installation details, is available digitally on www.hauraton.co.uk. – under the SPORT tabs.

SPORT - SPORTFIX® Digital catalogue available on request via sales@hauraton.co.uk For case studies go to www.drainage-projects.co.uk.

Hauraton – Enquiry 29

TORMAX automates glass arch access

Delivering invisible automation to a new arched glass doorway, TORMAX was contracted to install their technologically advanced iMotion 1401 operator into the stone floor of the entrance to the Porter’s Lodge, Christ Church at Oxford University.

Ideal for period properties such as this, the iMotion 1401 makes it possible to benefit from the convenience of an automatic entrance, without interfering with an historic façade.

Replacing a wooden door, aluminium and glass specialist, Openwood, was contracted to design and manufacture an all-glass frameless arched doorway, with TORMAX providing specialist automation with the iMotion 1401 door drive.

Novus’ efficiency benefits sheltered housing scheme

Novus Property Solutions has signed off its first year of a seven-year contract with Gosport Borough Council by delivering a refurbishment to a sheltered housing scheme in the town. The council commissioned Novus to carry out a comprehensive, 12-week refurbishment of Alec Rose House, a sheltered scheme for residents over the age of 60. The scheme itself comprises of 17 self-contained flats supported by communal facilities such as laundry, lounge, garden and enclosed corridors linking all parts of the scheme for security and safety.

Novus Property Solutions – Enquiry 30

Entirely unique in the marketplace, the TORMAX range of iMotion door operators are recognised for their exceptional life expectancy. This is due to the fact that their high torque motors do not feature any of the parts that generally wear out, such as gears and brushes. This significantly improves reliability in the long term and dramatically reduces required maintenance.

The iMotion 1401 can practically be located within a steel box beneath the floor of the Porter’s Lodge door, delivering reliable yet invisible automation for many years to come.

TORMAX – Enquiry 31

Kawneer wins key partnership with Sunesis

SUNESIS HAS APPOINTED KAWNEER AS AN APPROVED SUPPLIER.

Leading architectural aluminium systems supplier Kawneer has secured the contract to supply glazing systems to Sunesis, the joint venture between Scape Group, the local authority owned built environment specialist, and main contractor Willmott Dixon to deliver pre-designed primary school buildings.

Founded in 2010, the venture’s aim is to drive an evolutionary change in educational buildings procurement, delivering new schools for a fixed price with absolute certainty of specification and programmes as short as 26 weeks.

In the past six years, it has successfully delivered more than £100million of new education facilities to private and public sector clients, providing more than 8,500 new primary school places.

Kawneer is now the preferred supplier for Sunesis and will provide AA®100 curtain walling, AA®541 BRE Green Guide A+-rated casement windows, and series 190 heavy-duty external entrance doors for future Sunesis’ Keynes2, Paxton2 and Dewey school models.

The Keynes2 model features the organisation of classrooms around a large multifunctional central ‘street’ equivalent in size to four classrooms. Constructed without a single load-bearing wall, this model can be reconfigured when needed, with the 1FEN model designed to be easily extendable up to 2FEN provision.

The Paxton2 model comprises two parallel arcs connected by a central corridor. This arrangement ensures each classroom is linked directly to external space and the reception outdoor areas are kept separate from older children with options for a dedicated covered play area.

The building uses natural ventilation in the principal teaching areas and roof lights provide high levels of daylight to the centre of the plan. It is available in 1.5FE and 2FE sizes and its frame design makes it easy to extend in the future.

The Dewey is an efficient multi-storey building suited to urban sites where space is often at a premium. It is available in 2FE and 3FE, each with a further option

to add a nursery. Designed around a regular modular arrangement, it features outstanding teaching spaces, including BB103 recommended 60m2 classrooms throughout.

As part of the new two-year framework agreement Kawneer will deliver technical support at every stage, from initial concept design at BIM Level 2 and the preparation of specifications, through to installation through the manufacturer’s national network of approved specialist sub-contractors.

Kawneer sales and marketing director Mark Clemson said: “This new partnership with Sunesis takes our long-standing involvement with Scape and Willmott Dixon to a whole new level and we are delighted to have secured this much sought after supply chain framework.”

Tel: 01928 502604 www.kawneer.co.uk

Kawneer – Enquiry 35

Example of a Keynes2 2FEN model

CREATE A STUNNING OUTLOOK

Modern, minimalist first class design provides maximum transparency with outstanding safety. Easy Glass®, Q-railing’s glass balustrade systems, are fully modular enabling components to be interchanged in endless combinations. Installation is simple and fast.

A total of more than 130 metres of Q-railing Easy Glass® Slim and 3kN were installed throughout the recently refurbished Stourbridge Campus, part of the Birmingham Metropolitan College, including balustrade and staircases. For further information, to request a visit or to arrange a CPD presentation, please call: 01782 711 676 / 0800 781 4245 or email to sales.uk@q-railing.com.

Kilsaran supply hard landscaping solutions to Sandymoor School, Cheshire

PAVING AND WALLING SPECIALISTS KILSARAN INTERNATIONAL, HAS RECENTLY COMPLETED AN INTRICATELY DESIGNED PAVING PROJECT AT SANDYMOOR SCHOOL IN CHESHIRE.

Landscape Architects, Planit-IE, required a paving manufacturer that was flexible and cost-effective in order to create the desired landscape. Approximately 2000m2 of paving was supplied and hand laid across the new site, which specifically required an unusual 160 gauge laying style. The specification was made for the ever popular Mellifont block paver in a three size mix, using a bespoke Rustic, Charcoal and Curragh Gold colour blend.

“Kilsaran is experienced in providing hard landscaping solutions for unusual and challenging schemes, with a wealth of installations in the public sector field,” said Robert Davenhall, specifications manager at Kilsaran International. “Although we have worked with the architect before, the brief was completely different. It was exciting to be involved in a project that required high attention to detail and adopting a unique style paving installation, the result is visually stunning but still functions as the safe and low maintenance landscape a school environment requires.”

“We worked closely with the landscape architects to achieve the different laying patterns and colour mix blends. We laid out a number of demonstration panels out on the ground using the different blends of colours and block orientations under the architect’s specific instruction. This was to demonstrate what can be done with our standard products and using a little imagination. It helped create an idea of what the bespoke installation would look like prior to installation, and enabled the architect and client to have full confidence in their design and the ratio of colour blends, meeting their expectations above and beyond.”

The result of the high attention to detail given by Planit-IE and Kilsaran is a vibrant, colourful entrance to the school. Kilsaran worked closely with the client and specifiers to deliver the desired aesthetics within the constraints of cost and practicality, we like to think of it as hard landscaping solutions taking shape.

Kilsaran International is an established manufacturer of superior quality paving and walling solutions for domestic and

commercial hard landscaping. Applications range from permeable driveways and residential paving via a nationwide network of independent builders merchants to planning and delivering commercial landscaping solutions for extensive streetscapes, retail developments and social housing renovations with leading project planners, specifiers and architects. Head quartered at Kilsaran’s award-winning concrete manufacturing facility in Dublin, Ireland, a dedicated sales office in Manchester supports the UK business.

– Enquiry 37

Kilsaran

Optimum glazing solutions for optimum learning

Kawneer offers you a uniquely comprehensive aluminium glazing system range, specifically developed for the educational market by a truly global architectural systems manufacturer.

It all adds up to an unbeatable integrated package for the educational sector.

Kawneer UK Limited

Tel: 01928 502604

Email: kawneerAST@alcoa.com WWW.KAWNEER.CO.UK

Pods: No leaks, no tiles, no fuss

JONATHON BRAUNTON, SALES AND MARKETING MANAGER AT TAPLANES, HIGHLIGHTS MANY OF THE BENEFITS OFFERED BY PRE-FABRICATED WETROOM ENCLOSURES, ALSO KNOWN AS PODS...

re-fabricated wetroom enclosures, also referred to as Pods, are durable, quick to install and guarantee a leak proof construction.

Pods are available in both one-piece cubicles or sectional pod designs, where the sectional construction allows units to be manoeuvred easily into restrictive spaces with speed and ease.

The pre-fabricated structure provides many advantages over traditional construction methods and deliver significant long-term benefits. These include:

• Design build: Made to suit specific location and specification requirements

• No wet trades: The products do not require or rely upon silicone sealant and mastic

• Leak proof: This means they overcome the inherent problems of leaks, sealant replacement, mould growth, cracked tiles and trays, cleaning and ongoing

maintenance issues

• Strong material: They are constructed using materials such as 12mm heavy duty Polypropylene

• Speed of installation: Substantially quicker and easier than traditional construction methods

• Longevity: Significantly more durable and reliable than alternative construction methods

• Recycling: The products used in prefabricated wetroom enclosures are fully recyclable.

Although Pods are easily installed, they offer a long-termsolution that reduces maintenance and cleaning costs, making them very popular in the accommodation sector, especially universities, schools, housing associations, hostels and hotels.

Pods come with a choice of colour, shower fitments, lighting, extraction,door types, sanitary ware and they are pre-drilled. And

when it comes to cleaning, it couldn’t be easier - Pods can be cleaned simply by using a soft nylon brush or cloth.

Taplanes – Enquiry 39

Yeoman Shield Protects 24/7 at North Birmingham Academy

Not only does the building cater for the everyday requirements of a school environment for 11-19 year olds but also accommodates out of hours school clubs and activities, some like The Zone sports hall and conference facilities open to the general public.

“Because of the myriad of uses and the amount of people and equipment that moves around the building almost 24/7, we noticed that very quickly the new walls particularly were getting marked and damaged detracting from the appearance of the Academy.

“Image says a lot to both pupils and visitors about a school and with the amount of money invested into the building we were very keen to find a solution that would halt the damage and help to maintain a pristine and attractive interior. That’s when we contacted Yeoman Shield for advice on their wall and door protection products,” explained the premises manager for NBA.

Yeoman Shield’s Area Sales Manager undertook a free site survey and furnished North Birmingham Academy with a fully itemised quotation along with samples of the products.

FalmouthEx 2.0mm thick wall protection panels were fitted, by a team of Yeoman Shield’s directly employed fixing operatives, at 1250mm high along the busy 1st and 2nd floor corridors. Having to co-ordinate with the contemporary decor scheme already in place Yeoman Shield’s new Aubergine colour proved to be the perfect choice.

The wall of the Academy’s frequently used sports changing rooms were also protected with Yeoman Shield FalmouthEx wall panels, this time in a Mushroom colour which whilst guarding against everyday wear and tear has proved easy to clean.

The busy reception area of The Zone sports hall, which is frequented by students and is also open to the public between 5.00p.m. & 10.00p.m. on an evening and over the weekend, benefited from wall panels fitted around the notice board area in striking Regatta Blue and Mushroom.

“Fitting Yeoman Shield will definitely show a saving on our annual redecoration budgets which can cost anywhere up to £50.00/m2 for the repainting of walls. It will also save staff time who will be able to be re deployed to other important projects helping us get through our workload more efficiently.

“We were thrilled with the service and workmanship from Yeoman Shield and we will be continuing to roll out the wall protection throughout North Birmingham Academy,” concluded the Academy’s premises manager.

For more information on cost saving wall & door protection go to www.yeomanshield.com, email sallyann@yeomanshield.com or call 0113 279 5854.

Yeoman Shield – Enquiry 41

NORTH BIRMINGHAM ACADEMY OPENED THE DOORS OF ITS £23.6 MILLION STATE OF THE ART FACILITIES IN 2013.

the UK’s Leading Education Buildings Event

Whether you are looking at adding new buildings, considering refurbishing existing buildings or ongoing maintenance work, Education Estates is here to help source information, solutions and ideas.

18-19 Oct

2016

Manchester Central

www.educationestates.com

Education Estates is the only event of its kind to focus on the design, build, management and maintenance of the UK’s education buildings.

Register your place today at www.educationestates.com

Design. Build. Manage. Maintain.

Exhibitor List:

Advanced Showers International

AECOM

Apollo Fire Detectors

Arcadis Architects Design Partnership

BIM4Education

Building 4 Education Built Offsite

Carbon and Energy Fund Carillion CBRE

Class of Your Own Collinson

Construction Industry Council

CSG (Cleansing Service Group)

Custom Technology

Delabie

Design Quality Indicator (DQI)

Disposables UK Group

Ecophon Elliott Group

ESP Play Evolution5

Fermacell UK

Forbo Flooring Systems

Fordingbridge Galliford Try

Hamworthy Heating HLM

Honeywell

Independent Education Today

Jefferson Sheard Architects

Langley Design

LapSafe Products Limited

Learnstor®

Legionella Control Association

Legrand MEB Design

MIW Water Cooler Experts

Novus Property Solutions

Pegasus Group

Peter Brett Associates LLP

Planetsaver LED

Playforce

Salix Finance Ltd

TG Escapes

The McAvoy Group

The Transformation Trust

Thorpe Whyman and Briggs

TOA Corporation UK

Trend Control Systems

University Business

Wadsworth Security Products

Water Management Society (WMSoc)

To join this growing list of exhibitors and sponsors email jameslee@stepex.com or call 01892 518877.

From flights and battles in the sky to a peaceful learning environment

YARDS FROM WHERE BRITISH HURRICANES USED TO TAKE FLIGHT DURING THE BATTLE OF BRITAIN, STANDS GRADE II LISTED FORMER NAAFI BUILDING. THE BUILDING MAKES UP PART OF THE KENLEY AERODROME, THE MOST COMPLETE AIRFIELD, ASSOCIATED WITH THE BATTLE OF BRITAIN TO HAVE SURVIVED.

Throughout the Second World War the airfield was used as the front line of national defence, and was was fully operational up until 1978, since that time the building had fallen into a state of disrepair. Successful plans were put forward to not only restore an important part of history, but to renovate the former NAAFI building into an independent secondary school.

As the building is Listed and of great historical importance, serious consideration had to be given on how to make it a comfortable and peaceful learning environment. The current primary windows could not be replaced, despite being draughty and allowing noise ingress. Unispace Global consulted Selectaglaze, the specialist in secondary glazing to provide a discreet solution suitable for the Listed building.

Selectaglaze installed 70 units, using 4 different product types to match the existing primary window styles and sight lines. On the circular windows Selectaglaze used the Series 46 fixed unit, with its discreet slim frame with neat cover channels that conceal the fixing.

All of Selectaglaze’s units are tailor made to ensure the tightest fit and use twin seals to virtually eliminate draughts and reduce heat loss by up to 50%. Secondary glazing can also reduce noise ingress creating a quieter environment; a reduction of 45dB is achievable.

The secondary glazed units are a subtle solution, and from the building’s exterior are difficult to notice. Secondary glazing is an independent window fitted to the room side of a building, and as a reversible adaptation is accepted by most heritage bodies.

With fifty years’ experience and Royal Warrant holders since 2004, Selectaglaze has extensive experience with working on all building types from new build hotels to Listed offices.

– Enquiry 43

Ceiling delivers for school

A stunning new cricket pavilion at Oundle School features a striking bespoke ceiling from leading architectural products manufacturer Hunter Douglas.

A total of 200m2 of Hunter Douglas suspended ceiling panels, using Hunter Douglas Prestige FR MDF 16mm concealed grid panels, finished in birch veneer to complement the modern glass structure of the pavilion, and are decorated with a slot pattern (8mm x 88mm ctc 48mm) that provide superior sound absorption, enhanced by black acoustic tissue on the back of the panels, and also look aesthetically pleasing.

Hunter Douglas – Enquiry 44

Recycling in schools

The new novelty cow, pig, ladybird and tadpole recycling bins from Leafield Environmental have been attracting a lot of attention in schools nationwide, encouraging and educating children to recycle in the playground. The fun loving novelty bins have been specifically designed for children aged 2- 8 years. Ideal for both indoors and outside, and manufactured in durable polyethylene for a long and useful life, each bin has a 60 litre capacity. Optional lock available upon request. Easy to clean, UV resistant and ideal for low volume waste recycling.

Leafield Environmental – Enquiry 45

Floating ceiling adorns building

Hunter Douglas has created an impressive 450m2 circular floating ceiling in the reception area at the Sir Ian Wood Building, part of the £120 Garthdee Campus at Robert Gordon University, Aberdeen.

The open linear ceiling in multi-width module American Red Oak provides a natural feel within an ultra-modern building that is otherwise constructed from glass, hard masonry and cladding.

Hunter Douglas provided three widths to create depth and visual interest. The panels were finished on three sides with UV resistant varnish and were also treated with Magma fire treatment.

Hunter Douglas – Enquiry 46

Selectaglaze

Feature preview

Contractor FK Group and single ply manufacturer IKO Polymeric have completed a 48,000m2 roofing project for one of the world’s biggest online grocery centres – in under four months.

A number of practical innovations developed by project managers FK Group and IKO Polymeric ensured the project was completed on time, with minimal material waste and the best use of resources.

The first time and money-saving measure was IKO Polymeric’s manufacturing bespoke roll lengths for the project. Standard length membrane (20 linear metres) needs cutting or extending to fit required dimensions. On such a large and time-pressured project as the Erith centre this would lead to delays in installation and considerable waste of material –and more time and expense for disposal. So IKO Polymeric manufactured its Armourplan PVC single ply membrane in bespoke rolls of 22.35, 19.20 and 8.00 linear metres to fit the installation’s specific requirements.

Another innovation was manufacturing half the rolls with the membrane overlap on the right of the roll, and half with the overlap on the left. This 50/50 split meant the contractor could use two teams working simultaneously on either side of

the ridge, each rolling the membrane out correctly aligned without having to turn rolls – again, saving time and money.

“The project also benefitted from a new installation technique developed by FK Group,” explained Anthony Carlyle, Managing Director of IKO Polymeric. “The contractor welded together eight bespoke-length rolls to create a large (320m2) membrane ‘blanket’. This was then rolled up and positioned so the installer’s large team could apply adhesive before rolling it out like a carpet – effectively applying eight rolls at once. FK Group completed 20,000 metres in 10 days.

“This was possible because of the properties of IKO Polymeric’s PU lowfoaming adhesive, which can be applied and left exposed for up to 25 minutes, allowing large areas to be applied prior to the membrane’s installation. This allowed FK to minimise idle periods and spend less time working at height.”

Paul Groves reveals what this month’s articles have in store

Traditional looks, ground-breaking innovation: industry-leading clay pantile meets needs of UK specifiers

THE NEW LINCOLN CLAY PANTILE FROM MARLEY ETERNIT, THE UK’S LEADING ROOF SYSTEMS MANUFACTURER, COMBINES BREAK THROUGH INNOVATION WITH A TRADITIONAL AESTHETIC TO MEET THE NEEDS OF UK SPECIFIERS SEEKING A HIGH PERFORMANCE CLAY PANTILE.

Lincoln features a classic s-curve profile and thin leading edge, which can be used to a low minimum roof pitch of just 17.5 degrees, giving Lincoln a great deal of versatility for a wide range of projects.

The new pantile is available in two popular colours; Rustic Red and Natural Red with a comprehensive range of clay fittings and accessories. The Rustic Red has a premium weathered appearance suitable for housebuilding and refurbishment projects, where the project may need to match existing roofs or be subject to local planning approval. Alternatively, the Natural Red has a more uniform appearance with clean lines, giving a classic pantile appearance, ideal for new housing or commercial and local authority projects.

With changing weather conditions, the Lincoln tile and its comprehensive range of fi ttings and accessories provides a new high performance clay pantile solution to help architects and specifi ers meet the requirements of today’s roofs.

Alternatively, Marley Eternit’s Universal system is fully compatible with the Lincoln range of tiles and fittings and offers a maintenancefree mechanical fixing in line with the latest installation requirements.

Sarah Jackson, marketing product manager comments: “At Marley Eternit we’ve focussed on developing new products with low pitch

capabilities that can be installed to the latest fixing requirements quickly and easily.

“The classic curves of the Lincoln ensures it offers all the beauty expected from a traditional clay pantile, but its modern fix and low pitch capability mean it can be installed on a wide variety of projects.

“With changing weather conditions, the Lincoln tile and its comprehensive range of fittings and accessories provides a new high performance clay pantile solution to help architects and specifiers meet the requirements of today’s roofs.”

Discover how the new Lincoln clay pantile can offer you complete design versatility without compromising on tradition by visiting www.marleyeternit.co.uk/lincoln, or calling 01283 722588 to talk to Marley Eternit’s team of advisors.

Marley Eternit – Enquiry 47

Lincoln Rustic Red

Green and Blue: joined up thinking to reduce flood risk

Green Roofs have become an increasingly regular part of construction projects, especially in London and the Home Counties where they are used more to meet planning restrictions or gain BREEAM points. However, they also provide rainwater attenuation amongst their wide range of benefits.

Whilst there is no doubt that Green Roofs help manage rainfall they can only provide a limited contribution to flood risk alleviation, once they are saturated they drain as a normal roof. But there is another technology that can provide a far greater contribution to rainwater management: the Blue Roof.

Consisting of a water storage medium, typically a cellular geocomposite drainage/ retention board, and a discharge control mechanism, Blue roofs attenuate rainwater rather than drain it as quickly as possible. Correctly designing the Blue Roof releases attenuated water at the required discharge rate of the site, providing the integral source control and attenuation required by a SuDS system without the requirement for land consuming ponds and retention basins or below ground geocellular storage tanks.

When incorporated in an inverted roof construction the Blue Roof elements are installed above the insulation and thermal sheet, and can be finished with a green roof (extensive, wildflower, biodiverse or intensive), paving or gravel ballast. Waterproofing materials such as Radmat’s PermaQuik PQ6100 Hot Melt Monolithic Waterproofing are BBA Certified for zero falls applications with a durability for the lifetime of the building, and are ideal for Blue Roof applications where security against water ingress is a priority.

Jonathan Ward, an associate director at Arup simply describes a Blue Roof as ‘a flat roof allows stormwater to be temporarily stored and drain away slowly over a few

hours, thereby reducing flood risks.’ What’s more the roof area doesn’t have to be significant; a roof of less than 300m2 can attenuate 94% of the rainfall volume of a 1 in 100 year 6 hour storm event, draining over a 27 hour period.

Blue Roofs are not a new idea. They have been around in one form or another for well over 60 years, in the UK, Europe and the USA. So why aren’t we building more blue roofs in the UK? The answer to that probably lies in scepticism, outdated concerns over flat roofing materials and a lack of guidance documents and legislation.

Radmat – Enquiry 49

WHILST IT MAY NOT SCORE MANY POINTS ON THE POLITICAL STAGE THE REALITY IS THERE IS NO QUICK FIX SOLUTION TO FLOOD RISK. SUDS REGULATIONS HAVE HELPED MANAGE RAINFALL BUT THEY CURRENTLY IGNORE THE POTENTIAL BENEFITS THAT CAN BE PROVIDED BY USING THE ROOF OF A BUILDING: WHICH WE CURRENTLY AIM TO DRAIN WHILST EVER OTHER LANDSCAPED SURFACE IS BEING DRAINED.

When called upon to create a modern glassmaking studio in the garden of a Victorian terrace, project architects Moon Design + Build specified fibre cement slates. Used as an external envelope, it’s a beautiful contemporary solution that remains sympathetic to its period surrounds. And even more, it’s a solution that’s cost-effective, energy-efficient and pleasingly low-maintenance. Visit marleyeternit.co.uk/designedfortoday or call 01283 722588 to find out more about how our products are designed for today’s world.

Our fibre cement slates are designed for today’s world.

Majority of specifiers risking their liability by reusing roofing specifications

THE MAJORITY (57%) OF SPECIFIERS ADMIT REUSING ROOFING SPECIFICATIONS ON NEW PROJECTS - PUTTING THEIR LIABILITY AT RISK AND POTENTIALLY FALLING FOUL OF CHANGES TO NEW STANDARDS, ACCORDING TO RESEARCH RECENTLY RELEASED BY ROOFING AND FACADES MANUFACTURER, MARLEY ETERNIT.

ticking to specifications that have worked previously is the main reason given by 45% of specifiers who reuse them. Over one in ten (14%) assume all fittings and systems are “pretty much the same” and 22% say it is too time consuming to create a new specification.

When it comes to the particular roofing product area of dry fix, 44% consider the quality of it in the specification process, despite there being significant differences in the performance of systems on the market. This is a significant difference to the 81% who consider this when specifying tiles.

Nearly half (40%) of those who say they do not consider the quality of roofing accessories, like dry fix and ventilation products, say this is because they do not have detailed enough knowledge on the differences between one type of accessory and another. While 13% incorrectly believe all accessories perform to the same level and, 12% wrongly think the quality of the accessories in a full roofing system does not impact the liability for a project.

Gavin White, product manager from Marley Eternit, comments: “We undertook this survey

to understand more about current behaviours in specification. The findings not only show some misunderstandings, but also highlight some of the challenges specifiers face, including how time consuming the process can be. That’s why we’re continuing to work with specifiers to showcase the differences in quality that exist with roofing systems and developing ways to make bespoke specifications quicker and easier to produce - whether it be through our technical department, the on-line self-service facility or with one of our experienced local specification managers.

“Reusing specifications can bring elements of risk to a project and might mean that the highest quality and most suitable systems are not necessarily chosen. That’s why we’d encourage specifiers to take a fresh look at specifications, particularly with a new Dry Fix standard expected to launch at the end of 2016, which is being introduced because of inconsistencies between the quality of systems and reported product failures as a result.”

The research also revealed a desire for greater knowledge about roofing systems. In fact, the significant majority (87%) of specifiers would like to understand more about the differences in quality and

performance of accessories within a roofing system.

Gavin White continues: “As many specifiers would like to improve their knowledge of roofing systems, we’d encourage them to get in touch. They can ensure they are bestplaced to meet the requirements of the new Dry Fix standard if they prepare for it now by ensuring the systems they specify are of the highest quality and future-proofed.

“Specifying a full roofing system from tiles to accessories from one leading manufacturer can be a good way of ensuring a quality solution is selected and therefore, liability can be protected. Marley Eternit has led the way in dry fix innovations, ensuring we offer the best quality systems on the market, so we can work with specifiers to help them in the specification process.”

To find out more visit marleyeternit.co.uk

Marley Eternit – Enquiry

The Purist Approach

Specifying a roof window is one-time decision for a building.

When it comes to choosing one that is in-keeping with the architecture, no other roof window fits the bill quite like ours.

The original and most authentic Conservation Rooflight ® Because modern alternatives just don’t look right. Find out more 01993 833108 www. therooflightcompany .co.uk

Maintaining the Purist Approach –The importance of making your Specification stick

SPECIFYING A ROOF WINDOW IS A ONE-TIME DECISION FOR THE ENVELOPE OF THE BUILDING.

A‘specification’ is defined as a detailed description of the design and materials used to make something. Architects will no doubt agree that the importance of the correct and appropriate specification should never be underestimated. Therefore, it is understandable that switching a specification has long been a contentious issue within the construction sector as the reality is that on many occasions –the original specification is not withheld when ‘Specified Equal or Approved’ is detailed.

In the case of heritage properties, switching an original specification can have a significant and detrimental impact on the integrity of the project. Around 20% of the UK’s current housing stock consists of period properties, which are buildings that pre-date the First World War and legally it is the responsibility of the property owner to ensure such buildings are maintained and restored in an appropriate manner.

However, in a recent survey conducted by the Rooflight Company, 46% of architects felt they should have ultimate responsibility for this, demonstrating the passion many in the profession have for preserving important structures. With the increasing ‘equal or approved’ stamp appearing across specifications there is a risk to any detail listed by the architect to be changed for something that doesn’t meet their original expectations.

Architects, Nicholas Dean designed nine residential units in the Week Farm Listed Barn complex. The key issues for the refurbishment were natural light, ventilation and maximizing the views, but just as importantly the rooflights needed to blend sympathetically with the original features of the barns. By specifying a combination of standard and bespoke conservation rooflights, some up to four meters in length, Nicholas Dean Architects knew this would make it more difficult for the specification to be changed further on in the build.

Similarly, Ed Clare, project architect of Vokins Barn worked with Planning Officers to ensure his specification wasn’t changed “The local planners are quite strict and insist on traditional roof windows on sensitive projects such as this one. The Conservation Rooflight® is ideal for this purpose because they are a faithful reproduction of Victorian models in both size and appearance.” By having a Planning Officer on the scheme who approved the use of an arrangement of several different sizes of the same style of roof window, the specification was impossible to change throughout the build; because the original Conservation Rooflight® range comprises of fourteen standard sizes meaning a single glazing system could be utilised.

To see the findings, download the full report, ‘The Rooflight Company Conservation Report 2015’, at www.therooflightcompany.co.uk. For more information about the Conservation Rooflight® call our technically-trained team on 01993 833108 or visit our website.

Rooflight Company – Enquiry

The

The Conservation Rooflight® range has fourteen standard top hinged sizes and two side hinged egress sizes.

A Bespoke Conservation Rooflight at Week Farm measuring 1070mm x 1870mm

Seven standard Conservation Rooflights® were specified at Vokins Barn measuring up to 1021mm x 1180mm.

New Lincoln. A classic clay pantile

Our new Lincoln clay pantile combines a classic s-curve profile with an innovative easy-to-fix design. Completely open-gauge, and with low pitch capabilities too, Lincoln provides a modern, easy-to-use solution without compromising on tradition.

For more information, or to request your free sample, call us on 01283 722588 or visit marleyeternit.co.uk/lincoln

Weighing up the benefits of fibre cement

CHARLOTTE HUGHES, PRODUCT MANAGER FROM MARLEY ETERNIT, DISCUSSES THE ADVANTAGES OF SPECIFYING FIBRE CEMENT SLATE AS A LIGHTWEIGHT ROOFING AND CLADDING MATERIAL FOR OFFSITE CONSTRUCTION.

As the UK building industry comes under increasing pressure to reduce costs and boost output, there are clear signs that advanced construction methods, such as offsite and modular assembly, are gaining momentum, particularly in the housebuilding sector.

It is hardly surprising given the timescales –homes built using offsite methods, such as timber frame, can be built in a few weeks, rather than a few months. Last year, Barratt Developments said it planned to deliver 3,000 homes using offsite techniques and Legal and General Property is already building modular housing at its factory in Leeds. The Government is also backing this alternative construction approach through its Affordable Housing and Housing Zones programmes.

When specifying for projects using advanced methods of construction, the weight of roof coverings and facades becomes very important. The big

advantage of using a timber frame constructed offsite means that not only can it be erected very quickly on site, but because it is lightweight, the house is much cheaper to build. The less material used in the building, the lighter the overall weight and the fewer foundations required to support the structure, resulting in a significant cost saving on the overall build.

When using a lightweight timber frame, our fibre cement slates are the ideal solution because they only weigh around 20.4kg/ m2, which is less than half the weight of our thin leading edge concrete tile. They can also be installed much more quickly than natural slate, whether on site or in a factory as part of modular construction.

Fibre cement delivers the contemporary slate aesthetic that is very popular in new housing, at a much lower weight, while still being very cost effective. When it comes to the walls, using a fibre cement slate facade, like our Vertigo system, can have significant

weight savings over brick and block. Using a block and timber frame with Vertigo offers a lightweight façade of just 283 kg/m2, compared to a weight of 334kg/m² for traditional brick and block – over 15% lighter.

Vertigo also has the added advantage that it can be used for both offsite and modular assembly, as it is easy to fit the panels to the frame offsite, or they can be installed very quickly once the timber frame is erected on site.

We have seen growing demand for fibre cement slates from specifiers over recent years because of its cost effectiveness, aesthetic and sustainability benefits. Now, with the need to diversify construction techniques to build more quickly, fibre cement slate offers even more advantages as a roofing and facades material. Its light weight and quick speed of installation make it the ideal solution for offsite and modular construction, where both time and weight is of the essence.

Marley Eternit – Enquiry 55

Ruukki supply fire-tested panels for the New Park Regis Hotel in central Birmingham

THE SAFETY AND SUITABILITY OF THE BUILDING MATERIALS USED IN MULTI-STOREY CONSTRUCTIONS IS OF THE UTMOST CONCERN. WITH GREAT FIRE RISKS IN HIGH-RISE COMPLEXES, COMPANIES MUST ENSURE THAT THE PRODUCTS USED IN A BUILDING’S CONSTRUCTION MEET THE STRICTEST FIRE AND SAFETY REGULATIONS AND HAVE BEEN RIGOROUSLY TESTED TO INDUSTRY-APPROVED STANDARDS.

uukki’s SP2D PIR UK sandwich panels have been proven to be both fire-safe and energy-efficient, due to their low thermal conductivity and concealedfixing joint design, and were therefore chosen for the construction of the new, luxury Park Regis Hotel, Birmingham, which opened on 29th March.

The new hotel, constructed by Colmore Tang Construction, used Ruukki’s SP2D PIR composite cladding panels, which are ideal for façades that must combine thermal insulation with appealing appearance.

Panel Safety Testing Prior to use in the construction of the Park Regis, Birmingham,

Ruukki’s SP2D PIR UK sandwich panels were submitted for rigorous testing to BS8414 standard.

The panels were tested at the British Research Establishment (BRE) facility in Watford, and the results confirmed that Ruukki’s panels met the criteria stated within BRE 135 fire performance of external thermal insulation for walls of multi-storey buildings.

The certification provides Ruukki’s SP2D PIR sandwich panels with approval for use in structures over 18 metres in height, and verifies their compliance with the strictest fire and buildings regulations. The panels also have LPCB approval, and are available to be specified on NBS Plus.

Commitment to Health and Safety

With health and safety their upmost priority, Ruukki considered it vital to ensure that the panels were fully compliant with fire regulations. Aware of the disastrous impact of fire within multi-storey complexes, Ruukki is committed to the innovation, research and development of their products.

Gareth Ellison, Sales Director of Ruukki UK Ltd., said ‘The SP2D PIR panel is a superior product we are very proud of, which is tested to BS8414 and meets BRE 135 for fire performance of thermal insulation for the walls of multi-storey buildings, like the Park Regis hotel’.

The new certification has already won Ruukki a contract for a prestigious hotel, leisure and conferencing facility in Birmingham, with further upcoming projects in the pipeline.

Compliance with Building Regulations

Approved Document Part B

For buildings with a storey height in excess of 18m Part B requires that either materials used are defined as of ‘limited combustibility’, or that they are tested to BS 8414 and meet the requirements of BR135. The BS 8414 is a test method for assessing the fire performance of non-loadbearing external cladding systems, rainscreen overcladding systems and external wall insulation systems. The test and fire exposure conditions have been developed to be representative of an external fire source, or a fully developed (post flashover) fire in a room, venting through an opening such as a window aperture that exposes the cladding to the effects of external flames.

The test rig is a full scale sample measuring over 9m in height and incudes a combustion chamber at the base which simulates a window opening. Throughout the testing period damage is recorded in the flame spread on the surfaces, within cavities and areas of façade which are damaged or become detached. The primary test pass or fail criteria is the temperatures recorded over time within the layers of the build-up and at several heights.

(Source: BRE & www.bsigroup.com)

Find out more about Ruukki Panels visit www.ruukki.co.uk or contact 0121 704 7300.

Search by construction or product to find the right BS 5534 and BS 5250 compliant system.

Full technical support and comprehensive step-by-step fixing instructions. Download

Light Transmission – 5 factors you should consider

JOHN GODLEY, TECHNICAL MANAGER AT HAMBLESIDE DANELAW DISCUSSES THE IMPORTANT FACTORS TO CONSIDER FOR AN EFFECTIVE DAYLIGHTING PLAN

Rooflights can provide up to three times more light than vertical glazing, and can provide more even and useable distribution of natural light into a building, particularly in large structures where light is required deep into the building or in enclosed areas that cannot be lit through an external wall.

But it isn’t just as simple as installing some rooflights and the job is done. There are some important factors to consider for an effective daylighting plan.

1. Direct Light vs Diffused Light Direct Light

Light that enters a building through transparent materials, such as glass and polycarbonate, provides a strong and direct light path that can create high localised levels of illumination and provide clear vision to the outside of the building, but in periods of strong sunlight it can create strong contrasts between light and dark, producing undesirable shadows and glare.

Diffused Light

Light ‘spreads out’ as it passes through translucent diffusing materials such as GRP. This makes more efficient use of

the available light by spreading it over a far greater area, significantly reducing the difference between light and shade, minimising shadows thereby creating a more consistently, evenly lit space.

2. Levels of light transmission

Different rooflight and insulant materials provide very different levels of light transmission, and

it is important that all elements of the rooflight assembly are taken into consideration, particularly with ‘multiple layer’ rooflights for improved insulation. Even transparent elements like glass or polycarbonate can suffer from significant reflectance light losses.

Remember the problems with the ‘Walkie Talkie’ building in London? The more ‘plane elements’ in a rooflight assembly, no matter how transparent that element, the greater this reflectance loss can be.

So, whilst multi-walled polycarbonate insulation will improve the thermal performance of a rooflight, it will also reflect away more of the daylight, reducing the effectiveness of that rooflight.

Critically, many building owners ignore the financial value of scheduled maintenance cleaning the rooflights regularly will ensure that dirt retention does not reduce light transmission.

Diffused light – good, even light distribution

Direct light – poor distribution & glare

Too many people grasp the importance of this simple rule too late.

3. Intended building use

Where possible, designers need to consider the intended building use and possible future changes to the use or internal layout of the building. (See Table)

Windows and wall lights become ineffective at distances over 6m into the building and daylighting through rooflights becomes the most effective method. When they’re combined with an efficient automated light control system, those efficiencies can be optimised for the best possible lighting energy consumption reductions and the savings that go with them.

4.Energy Saving

In newer buildings, excellent thermal performance is now being achieved. This means that some of the most significant savings in operational energy can be gained by using the

Activity

free resource of natural daylight. Anything that minimises the need to switch on internal artificial lighting, however efficient that internal lighting may be, can only be a good thing.

In newer, well insulated buildings, the lighting cost per unit can be as much as FOUR TIMES the heating cost losses, making free, natural daylighting a simple, cost effective way to save on fossil fuel usage and building running costs.

5. G-Value (Solar Gain)

But this is not to say that the ideal scenario is to simply bring as much daylight into the building as possible. There has to be a limit. For any building, there is an optimum light level which will give optimum energy savings and daylighting benefits. This formed part of a study conducted by DeMontfort University, which concluded that the optimum rooflight percentage can typically

Recommended Illuminance

Continuously occupied with visual tasks but not requiring perception of detail 200

Moderately difficult visual tasks 500

Difficult visual tasks requiring accurate colour judgement or perception of movement 1000

Precise detailed work requiring accurate perception of intricate detail 2000

be as much as 18% – 20%. Beyond that point, the heat – or total solar gain - which naturally accompanies daylight into a building can begin to create overheating problems without an adequate ventilation strategy. This is a key reason for the need to understand the relationship between Light Transmission and g-value.

Building designers often specify a rooflight with a high light transmission, but with a low g-value, not realising that the two are inextricably linked.

It is not possible, at least with standard Polycarbonate or GRP rooflights, to have high light transmission with low g-value, since the majority of transmitted heat is mainly at the visible range of the solar spectrum.

Hambleside – Enquiry 60

Typical Building Type

General warehousing and storage facilities, reception areas

General retail and manufacturing areas

Clothing and furniture retailing, sports halls

Engineering facilities, craft and design studios (good background plus specialist task lighting)

ZENON

RETHINKING THE ROOFLIGHT

Responding to customer feedback and the increasing demands of today’s metal roofing and cladding envelope professionals, the design team at Hambleside Danelaw are pleased to unveil a package of improvements to the company’s composite panel rooflight following the launch of their new Zenon range.

These improvements address key installation issues and can deliver a range of benefits to the metal building envelope, including:

• Increased light transmission

• Improved light distribution

• Lower U-values

• Reduced cold bridging

• Compression resistant fillers

• Enhanced spanning capabilities

For more information please contact our Sales Department: by email sales@hambleside-danelaw.co.uk or call 01327 701 920

Hambleside Danelaw Rooflights

Glazing Vision meet Part Q

Recent changes to Building Regulations

Approved Document Q: Security in Dwellings means that anyone wishing to install rooflights in ‘easily accessible areas’ will need to ensure that they specify a product which is compliant with Part Q. Glazing Vision’s Secure and Secure+ rooflights have been tested to the latest LPS 2081:1 2015 standard. The range is accredited by the Loss Prevention Certification Board issued by the BRE. Secure and Secure+ rooflights are the first in the UK to be backed by Secured by Design to LPS2081:1 2015.

Glazing Vision – Enquiry 62

Vertigo gives distinct aesthetic

A roof extension project in London has used an innovative Vertigo fibre cement slate from Marley Eternit, specifically designed for vertical application, to create a distinctive, contemporary dormer conversion, which had to meet stringent local planning requirements.

The first of its kind in the UK, Vertigo consists of small 600mm by 300mm slate like panels which can be quickly fixed onto battens, with the desired amount of insulation in between. The fibre cement slates perfectly adapt to the contours of the building, providing a second protective skin.

Bespoke access roof system

Roof-Pro has successfully completed a £22,000 bespoke roof access system project at the Royal Derby Hospital for an extension which houses an MRI scanner and associated equipment. The main elements of this multicomponent project were poviding stable, non-penetrating support for the chiller and Air Handling Units (AHUs), a waterproof method of bringing cables and pipes from the service units down into the building and step-over access to the chiller support platform, enabling the units to be serviced and inspected by maintenance personnel.

Alumasc Roofing – Enquiry 64

90 years’ roofing experience

A new, easy-to-use app delivering 90 years of roofing installation, compliance and specification expertise to the fingertips of specifiers has been made available as a free download on Google Play, Amazon and iTunes by the UK’s leading roofing systems manufacturer, Marley Eternit. The Sitework app features automatically updated information on installation for fitting Marley Eternit’s extensive range of tiles, slates, dry fix and ventilation systems to the latest BS 5534 requirements as well as storage instructions, safety requirements and information on the full range of products.

Marley Eternit – Enquiry 67

Service Mark accreditation

A commitment to deliver “world class customer service” has resulted in Marley Eternit being awarded the coveted Service Mark accreditation from the Institute of Customer Service (ICS). The accreditation from the ICS, the independent, professional membership body for customer service, means that Marley Eternit not only delivers a “world class service” but is committed to upholding those standards for its customers. This means continually striving to increase efficiency, using feedback to enhance and improve service and helping customers to have queries answered quickly and effectively saving them time and money.

Marley Eternit – Enquiry

65

The purist approach

Specifying a roof window is a one-time decision for the envelope of a building. When working on heritage or listed buildings, the original Conservation Rooflight from The Rooflight Company has the most authentic design. The Nicholas Dean Practice specified 20 bespoke Conservation Rooflights for Week Farm in Devon in sizes measuring up to one meter wide by four metres in length. The key issues were lighting, ventilation and maximizing the views and the architects were as pleasantly surprised by the ease of installation of such large roof windows.

The Rooflight Company – Enquiry 68

Topseal HD System for Balconies, Walkways & Stairs

Topseal has designed the Topseal HD system which can be used for roofing but is also ideal for balconies, external walkways and stairs, as it incorporates additional reinforcement, which ensures the roof is completely safe for foot traffic. As well as the increased strength, the Topseal HD system can come with a coated aggregate or anti-slip finish. The anti-slip finish is ideal for foot traffic applications, as it provides a much safer surface to walk on. It also comes with a 25 year guarantee. Topseal approved installers cover the UK and between them have installed a number of balconies and walkways using the Topseal HD system including balconies on local authority housing blocks to balconies and walkways on brand new domestic dwellings.

Topseal – Enquiry 66

Marley Eternit – Enquiry 63

Structural deterioration of the Cavity Wall - Dampness & ratcheting

PARAPET CAVITY WALLS DIFFER FROM CONVENTIONAL CAVITY WALLS BECAUSE BOTH FACES ARE EXPOSED. THE BRITISH STANDARD DETAIL SHOWS A STEPPING DPC WITHIN A CAVITY PARAPET BUILT INTO BOTH THE INNER AND OUTER SKINS. THE PARAPET MASONRY IS THUS EFFECTIVELY SEPARATED FROM THE MASONRY BENEATH ITRESTING ON A DPC SLIP-PLANE AT THE HIGHEST AND MOST EXPOSED PART OF THE BUILDING.

Expansion of both skins takes place when parapet masonry becomes saturated with rain and also when the external air temperature experiences high and low extremes. The parapet DPC’s offer the least line of resistance and cracking results followed by masonry movement within both skins.

Where the amount of expansion movement is not fully compensated by contraction, progressive movement will occur as a result of ratcheting. This is the term used to describe where expansion movement is not fully matched by the retraction movement and masonry above and below the DPC progressively moves out of alignment. Consequently the upper masonry overhangs the masonry below the DPC, forming a ‘ledge’.

Using a preformed profiled Type P parapet cavitray can eliminate such problems. The Type P is ready-shaped and self-supporting and requires building into one skin only. An outward stepping profile is achieved but the opposite masonry skin is not required to provide support. Thus the outer skin remains unpunctuated and the structural integrity of wall continuous. The Type P preformed profile maintains uniform and consistent arrestment and damp protection.

The ratcheting movement and structural weakness shown in this parapet could have been avoided by using a Type P cavitray that avoids interruption and punctuation of the external skin.

Curved parapets can accentuate the ledge problem especially if the curve is between two resilient structural points. Thrust direction at 90º to the arc results in a radius eyebrow ledge. Such movement is commonly accompanied with coping dislodgement at the top of the parapet, where coping pinching occurs.

The right specification ensures a correctly protected structure and masonry continuity. Cavity Trays of Yeovil has been awarded European Technical Approval. 01935 474769 www.cavitytrays.com

Cavity Trays – Enquiry 71

Double success for Bauder at National Roofing Awards

FLAT ROOFING SPECIALIST BAUDER WAS RECOGNISED AT THIS YEAR’S UK ROOFING AWARDS, WINNING TWO OF THE PRIZES ON OFFER FOR ITS WORK ON BYKER WALL IN NEWCASTLE AND ROM’S MANUFACTURING FACILITY IN SHEFFIELD. OW IN ITS ELEVENTH YEAR, THE ROOFING AWARDS ARE AN INDUSTRY-WIDE COMPETITION THAT CELEBRATES OUTSTANDING STANDARDS OF WORKMANSHIP AND SAFETY WITHIN THE ROOFING INDUSTRY.

This year the level of competition was particularly high with almost 300 project entries being submitted for the fourteen award categories available. A wide range of criteria are taken into consideration by the judging panel when determining category winners including: degree of difficulty, aesthetics, problemsolving and environmental qualities.

Bauder’s first win of the night came for its photovoltaic (PV) installation at the landmark, Grade II listed Byker Wall estate, which won the ‘Solar on Roofs’ category. As part of the £26 million refurbishment of the residential properties, work was required to not only repair the failing roof but to also bring Byker Wall to the forefront of modern-day roofing technology with the addition of a photovoltaic system. The works included converting the pitched metal roof back to its original flat roof status and replacing the waterproofing

with Bauder’s high quality reinforced bitumen system, which was expertly installed by Hodgson Sayers. Four of the ten housing blocks were then fitted with 132 state-ofthe-art PV Modules, enabling Byker Wall to generate at least 39.6 megawatt-hours of solar power each year.

Following on from this success, ROM Ltd was then chosen as the winning project for the ‘Reinforced Bitumen Membranes’ category from a group of four finalists that included two other Bauder projects. The phased roof

refurbishment at the manufacturing facility involved replacing the failing waterproofing with over 9,250m2 of Bauder’s premium bituminous system, BTRS, which was installed by Mitie Tilley Roofing. The project had various health and safety implications, with the main-substructure proving unstable due to corrosion and the facility remaining operational throughout the works, however all remedial work was completed on time and to budget much to the delight of the client.

Bauder – Enquiry 72

High

Completely

Sika launches innovative online sustainability hub for specifiers

ARCHITECTS, CONTRACTORS AND CLIENTS ARE SET TO SAVE TIME AND HASSLE WITH SIKA’S SUSTAINABILITY HUB, SARNAFIL.CO.UK/HUB, A NEW WEBSITE PACKED WITH TOOLS FOR THOSE SPECIFYING PROJECTS WITH A SUSTAINABILITY REQUIREMENT.

S

ustainability considerations within a specification, especially if they’re essential to meet certain corporate social responsibility requirements or obey regulations, can take days to research and calculate. Sika’s Sustainability Hub will drastically reduce this time with its all-in-one portal that guides users through the process.

The hub contains information on Life Cycle Assessments (LCA’s), a standardised method used to evaluate the environmental impacts associated with all the stages of a Sika product’s life. Sika can offer specific LCA evaluations for individual projects along with information on BRE green guide ratings and Environmental Product Datasheets (EPD’s), providing the specific information specifiers need to meet sustainability requirements.

In addition, the user can request general sustainability packs or specific packs for green building certification schemes including

BREEAM, (Building Research Establishment Environmental Assessment Method), the standard for best practice in sustainable design, and LEED (Leadership in Energy and Environmental Design).

To maintain a flexible system BREEAM adopts a ‘balanced score-card’ approach to the assessment and rating of building performance. Requesting project specific BREEAM packs through the website, saves time and outlines

the extra points available through the specification of a Sika roofing system.

The launch of this new website is part of Sika’s continued implementation of its 2014-2018 Sustainability Strategy, aiming to enhance the company’s operating practice, reduce negative impacts, and to help its partners and customers do the same.

Sika – Enquiry 74

Jet Cox Shedding Light at Lidl Distribution Centres

CONTINUOUS BARREL VAULT ROOFLIGHT

ILidl are growing fast in the UK and have recently commissioned work on 3 new regional distribution centres, in Southampton, Newton Aycliffe and Wednesbury – all of which have utilised continuous barrel vault rooflights from Jet Cox.

et Cox and Jet Group, are a regular partner Rooflight supplier with Lidl, installing its full range of systems on facilities across the whole of Europe.

SYSTEMS

FROM JET COX HAVE BEEN CHOSEN FOR 3 NEW DISTRIBUTION CENTRES BELONGING TO ONE OF EUROPE’S LEADING RETAILERS.

Continuous Polycarbonate Barrel Vaults have been installed at the Southampton facility, incorporating a Polycarbonate Sprinkler Ceiling. 2000m of Barrel Vaults were installed across the entire roofscape, in accordance with Lidl’s light and fire performance criteria. Jet Cox’s extensive manufacturing capabilities enabled the system to be supplied in 3 weeks following sign-off of the final design, at prices comparable to alternative systems of lower specification. The installation was carried out by Jet Cox’s experienced European

and UK teams, working together to deliver a complete Rooflight system on program and with all elements overseen by the UK contract management team. They worked closely alongside the sprinkler system designer to ensure correct positioning of the integral sprinkler ceiling, and also with the roofing contractor to overcome the logistical challenges posed by the British winter weather.

All Jet Cox Barrel Vaults are manufactured and tailored to individual requirements and offer a light source of unlimited length, in widths ranging from 600mm to 7000mm. The system is supplied as a complete kit of tailor-made components, keeping installation times to a minimum.

For more information on Jet Cox bespoke products and the full range of Daylight and Ventilation solutions, please call 0121 530 4230 or visit www.jet-cox.co.uk

Jet Cox – Enquiry 75

DELIVERING ROOFING EXCELLENCE

THE ONLY ROOFING PARTNER YOU NEED

Langley has a proud history of combining technically sound roofing systems with unrivalled expertise and high-quality workmanship. Whether a design is straightforward or specialist, we take great pride in our ability to provide an end-to-end approach to each project, from initial consultation and design through final installation and after sales care. With our reputation cemented over five decades, we’re the roofing specialist both specifiers and contractors choose to work with, again and again.

LANGLEY ROOFING SYSTEMS

Photovoltaic Solutions

Flat-to-Pitched Green Roofing

Built-up & Single Ply Roofing Liquid Roofing Polymer Modified Asphalt

For more information please call: 01327 704778 | email: enquiries@langley.co.uk | or visit: www.langley.co.uk

Flat is back

Cutting edge performance.

Developed and rigorously tested over 18 months, our new fl at roofi ng range offers solutions with cutting edge thinness and thermal performance. You can thank Joe and our product development team for that. Plus, like all Celotex products, they come with online tools, support and aftercare.

#flatisback celotex.co.uk

Flat Roofing by Celotex

Joe Head of Research & Development

Enhancing external façades with architectural cast stone

THE USE OF ARCHITECTURAL COMPONENTS TO ENHANCE THE FAÇADE OF A PROPERTY HAS BECOME INCREASINGLY POPULAR FOR NEW BUILDS, RESTORATION PROJECTS AND RESIDENTIAL AND COMMERCIAL DEVELOPMENTS. THE BENEFITS AND OPPORTUNITIES PROVIDED BY UTILISING ARCHITECTURAL FEATURES ARE AGAIN BEING APPRECIATED FOR BOTH PUBLIC AND PRIVATE BUILDINGS, IN ORDER TO PROVIDE AN ELEMENT OF GRANDEUR.

The United Kingdom Cast Stone Association (UKCSA) has recently celebrated its 25th anniversary with an ‘Excellence in the use of cast stone’ awards ceremony. Haddonstone won the Best Commercial Project category, for the stonework façades manufactured for the Marshes Shopping Centre, Dundalk - highlighting the importance of the use of architectural cast stone. Haddonstone also won the Best Housing Development Project category for a luxury private development at Wootton Place, Esher, working closely with the renowned Octagon Developments.

The Marshes Shopping Centre is a prestigious development in the centre of Dundalk, Ireland. At over 400,000 square feet in size the shopping complex required a high quality finish to match the high-end outlets in the centre.

Haddonstone was approached by architects WDR & RT Taggart for their client McLaughlin & Harvey, to supply extensive custom and standard architectural components for all the façades of the shopping centre. The main feature was a magnificent portico design featuring custom made columns, including Corinthian Capitals, measuring eight metres in height and nearly a metre in diameter. In addition to the portico, custom window surrounds were manufactured and a Cupola was created utilising a standard temple design.

Other architectural stonework manufactured by Haddonstone to compliment the key features of the Marshes Shopping Centre include quoins, half columns, balls and bases, string course and extensive cladding to all visible façades of the complex.

Haddonstone is a unique form of cast limestone with a surface texture similar to Portland stone or natural limestone. The company has an extensive standard range and can also create custom-made designs to individual specifications in any quantity. Around 30% of all stonework manufactured

by Haddonstone is custom-made, utilising the company’s extensive mould shop and production facility in Northamptonshire.

Haddonstone also offers alternatives to the dry cast Haddonstone mix -TecStone and TecLite. TecStone is a unique wet cast production that produces a denser cast stone material with a smoother finish to meet demanding design and performance criteria specified in refurbishment projects. TecLite is a high specification material containing drawn glass fibre which benefits from a high strength to weight ratio. Its thin wall construction and GRC technology means the component weight is reduced by approximately two thirds when compared with similar Haddonstone pieces. TecLite is ideal for retro-fit, refurbishments, timber frame and new build projects where weight is an issue.

Whether you are looking to enhance an existing property, restore an historic building or design a new build, architectural cast stone can embellish and compliment an

otherwise perhaps rather ordinary façade, uplifting it to much grander proportions.

For more information on the Haddonstone collection request a copy of the company’s 216 page catalogue email info@haddonstone.co.uk, visit www.haddonstone.com or call 01604 770711.

Haddonstone – Enquiry 78

Nordic Royal. Project: The Curve, Teesside University; Architects: Austin-Smith:Lord; Photo: Martine Hamilton Knight

Creating beautiful beach huts with a long lifespan and low maintenance

A CRYSTAL BLUE SEASCAPE AND GOLDEN SAND MAKE UP MUDEFORD SANDSPIT IN EAST DORSET - HOME TO SOME OF BRITAIN’S MOST EXPENSIVE LUXURY BEACH HUTS.

ff the Isle of Wight and a ferry ride from civilisation, the huts are a little piece of heaven for beachgoers who want a quiet trip and immersive nature experience. Private clients commission SAM’s customer Ecologic Developments to rebuild beach huts on the spit.

But on a sea-locked spit of land, how do you create and transport something that’s beautiful, functional, and also long-lasting in weather that can be more than occasionally temperamental?

Arriving at the Mudeford sandspit is a journey too: getting there requires a 30-minute trek on foot, a ride on a novelty Noddy train (how good is that?) or a short ferry trip.

Complicating matters further is that Mudeford is a delicate site near an SSI – a special site of scientific interest. Pete Samson and the team in Ecologic Developments need to get their huts from the off-site base through an ancient woodland and all the way back to Mudeford.

Getting it right requires impressive logistics and an even more impressive building material. Which is exactly why Pete and his five-man team chose SAM Trimax.

A year ago, Ecologic Developments made the decision to clad entirely with SAM Trimax for the longevity, stability, and peace of mind. With a full off-site construction system making the spine of their builds, Ecologic Developments used SAM Trimax to maximise productivity without any risk to the six-week build from the weather.

“We chose SAM Trimax for the peace of mind,” says Pete. “”It’s got that longevity. We impart that knowledge to our customers and really allow them to make a conscious

decision that they’re using a product that’s not only made through a non-toxic, sustainable process, but something that’s going to pay dividends in the long run in terms of lack of maintenance and looking good.”

Durable and high-quality, SAM Trimax was the perfect choice, especially compared to timber, a cement-based cladding, or UPVC cladding.

A further challenge for Samson’s team comes in getting the fully finished huts on site.

Standard-sized huts make the trek on a low-bedded lorry, but extra-wide huts can’t fit through the ancient woodland on a nature reserve through which the sandspit is accessed. The team devised a novel journey involving a locally-commissioned barge. A finished hut is tied to the back of a low-loader and down to a slipway where it’s craned onto one of the barges and then dragged down the river to complete the journey.

This year, Ecologic Developments have fitted 342 long lengths of profiled cladding in either the shiplap or feather edge profile to their builds, and they’ve been so impressed with the swap to SAM Trimax that Pete recommends it for all their high exposure area projects.

The residents have noticed the difference in quality. “The feedback we’ve had so far from all the local community is that our huts are a cut above the rest,” Pete says.

“Undeniably one of the main factors in that is the neatness, uniformity, and the crisp look you can achieve with the SAM Trimax cladding.”

www.sammouldings.co.uk SAM Mouldings

Royal Crown

A GOLDEN CROWN OF NORDIC ROYAL COPPER ALLOY FROM AURUBIS DEFINES THE NEW CULTURAL CENTRE IN THE

SWEDISH TOWN OF LANDVETTER.

Designed by Fredblad Arkitekter, the new culture centre is intended as an urban hub for the community. It was conceived as a simple white box, crowned by a recessed volume clad in Nordic Royal golden copper alloy and set behind a roof garden. The white rendered base of the building brightens the space around it. Then, for the top floor, the architects needed a colourful and reflective material that would emphasize the angled façade and roof form.

The architects’ choice of Nordic Royal had symbolic as well as architectural and practical reasons. They felt that: “A culture centre should draw attention, be festive and daring in its appearance, but it must also fit in and be a natural part of its context.” They viewed copper

and its alloys as high-end, quality materials with a certain civic status and presence, offering a good contrast to the simpler materials used for the interiors and also referencing musical instruments made of brass.

Innovative Copper Alloy

Nordic Royal is an innovative alloy of copper with aluminium and zinc, giving a rich golden through-colour that is very stable. The surface retains its golden colour and simply loses some of its sheen as the oxide layer thickens with exposure to the atmosphere, resulting in a protective matt finish. It behaves differently to other copper products

over time and does not develop a blue or green patina.

Internally, the building’s plan form revolves around a large open atrium that connects the three floors. This space features large skylights that allow natural light to flow in and also houses the building’s vertical communications, as well as providing relaxed public space for social interaction. The walls are clad with plywood in the same shade as the copper alloy and some interior detailing is in brass, also referencing the exterior copper alloy. The light golden colour glows in the natural light from the skylights.

Colour your thinking

Cembrit’s new range of fibre-cement rainscreen claddings is available in 61 colours. From their new factory, this next generation of fibre-cement claddings is highly engineered, high performance and cost-effective.

A gigantic staircase leads upwards and offers seating for visitors to the building. When all floors are open, the stair functions as seating space for the café. When there is a concert on the building’s top floor, visitors continue up the stairs and arrive in a bright foyer with large windows facing the evening sun. The rooftop terrace offers a fantastic view of Landvetter town centre.

A culture centre should draw attention, be festive and daring in its appearance but it must also fit in and be a natural part of its context.

Leading Copper Group

Nordic Royal is produced by Aurubis, part of the world’s leading integrated copper group and largest copper recycler. Other copper alloys include Nordic Bronze and Nordic Brass – now also available pre-weathered. In addition to Nordic Standard copper, other Aurubis Architectural surfaces include Nordic Green and Nordic Blue factory-applied patinas - developed with properties and colours based on the same brochantite mineralogy found in natural patinas all over the world. Nordic Brown pre-oxidised copper gives either light or dark brown oxidisation that otherwise takes time to develop in the environment.

For more information visit: www.aurubis.com/finland/architectural or email: g.bell@aurubis.com

Aurubis – Enquiry 82

Striking design realised

The Kingspan TEK Building System has helped to alleviate the pressure on an iconic build in Lewes, East Sussex, as featured on Channel 4’s Grand Designs. Clad in CORTEN rusted steel, architect Sandy Rendel’s striking design features the Kingspan TEK Building System, comprising of structural insulated panels (SIPs), which can be pre-cut to each project’s specification. This bespoke approach, combined with the panelised system construction, allowed the construction team to establish a fast and predictable installation programme. Kingspan TEK Cladding Panel and Kingspan TEK Building System panels are now available in a 172 mm thickness.

Kingspan TEK – Enquiry 86

Aluminium panels at the office

Panel Systems has recently supplied aluminium faced glazing panels for the new 3 St Pauls Place office development in Sheffield. The 10 storey building, which offers spectacular views over the Peace Gardens in Sheffield, features Aluglaze panels in two anodised colours: Bronze and Blue-Grey. In total, Panel Systems supplied over 1,100m2 of insulated panels, with a firerated core. The panels were specified to meet u-values as low as 0.19w/m2K. The insulated panels help to reduce energy consumption and the carbon footprint due to their high performance insulated core.

Panel Systems – Enquiry 84

Specifiers go for gold

ROCKPANEL Group is giving specifiers even greater creative freedom with the unveiling of a new eye-catching ROCKPANEL Metallics design. The mellow opulence of ROCKPANEL Metallics Gold will equip architects with an even greater choice of façade cladding boards, inspiring them to dream up and realise their most stunning architectural visions. The ROCKPANEL Group decided to introduce the new design to meet demand from architects across Europe. The engineered lustre of the ROCKPANEL Metallics Gold will ensure the panels bring a touch of class to any building.

ROCKPANEL – Enquiry 85

Knauf offer innovative ThroughWall Solution

The most significant benefit of the ThroughWall Solution is Knauf being able to offer the specifier a single point of contact to provide the complete Knauf technical specification. Design details can now be provided by a single source. This allows for accurate design drawings so that contractors will know exactly what to expect in construction. This simplification of the design and specification process also allows for a range of insurance backed Knauf warranties.

Durable and high quality engineered components of the ThroughWall Solution deliver excellent acoustic, thermal, fire performance properties and air tightness levels while insuring greater sustainability due to Knauf’s responsible manufacturing credentials.

Suitable for use above 18m, the Knauf ThroughWall Solution has met the requirements set out in Annex B of BRE 135 and has successfully passed the test as per British Standard 8414-2.

Knauf – Enquiry 87

Levolux touches down at ESA

The £12 million Roy Gibson building, which will host the European Space Agency’s (ESA) UK branch, has been fitted with an adaptable solar shading solution, courtesy of Levolux. A combination of external Venetian blinds and curved Aerofoil Fins have been incorporated into the façade, providing shade to office areas and the building’s reception and conference wing, respectively. In total, Levolux supplied and installed 411 external, motorised Specialist Venetian Blinds, against glazed openings to office areas. The external blinds feature 60mm wide, perforated, roll-formed aluminium slats.

Levolux – Enquiry 88

Sto bring new life to project

A project to bring new life to a landmark building in London’s Covent Garden has turned the spotlight on the products and technical expertise available from Sto Ltd. A variety of Sto products were used on the exterior of the Dukelease Properties Hop House building, such as StoDeco Plan boards for the front façade, StoTherm Classic K external wall insulation (EWI) system to the rear façade and a top coat of StoSilco silicone render finish was also applied. The render provides excellent protection against weathering and dampness.

Sto Ltd. – Enquiry 89

ThroughWall Solution combines quality Knauf products that give Knauf the unique advantage of being able to specify the façade infill panel through to the internal partitions.

RMIG ImagePerf adds inspiring dimension to architecture

A STRIKING AND UNUSUAL FACADE MANUFACTURED FROM PRECISION PERFORATED ALUMINIUM PANELS

HELPS

TAKE THIS MODERN SCHOOL BUILDING IN A NEW DIRECTION.

When embarking on the challenging project of constructing a secondary school building, Lyngdal Municipality wanted to go in a new direction.

The goal of the project was to create a progressive and innovative school building, with the emphasis on high quality and functional solutions.

Precision perforated aluminium sheets from RMIG are versatile, functional and practical, therefore the ideal solution to create a modern and virtually maintenance-free facade befitting the new school building. Combine all this with RMIG’s capability and know-how and the end result is remarkable.

The facade on the new school building is both simple and complex in its design and has been created with the use of RMIG round hole perforation combined with RMIG ImagePerf, bringing intricate and complex perforation design to life.

An eye-catching two-tone facade has been created with the successful combination of RMIG ImagePerf and RMIG round hole perforation. On the new school building, the appearance of this unusual and attractive

facade changes according to light and distance, bringing character and depth to the images. Technical characteristics of the project are: raw material – aluminium; thickness - 3.0 mm; and surface treatment – anodising.

RMIG has local representation in 13 countries in Europe, with a total of 15 sales offices and production units, plus other local representatives in many overseas countries.

www.city-emotion.com email: info.uk@rmig.com Tel: 01925 839610

RMIG – Enquiry 90

New catalogue and processing plant for Wykamol

WYKAMOL, MARKET LEADER IN THE DEVELOPMENT AND SUPPLY OF REMEDIAL TREATMENT PRODUCTS FOR DAMP, INSECT INFESTATION, AND DRY ROT HAS LAUNCHED A BRAND NEW CORPORATE CATALOGUE, FEATURING NEW INNOVATIONS AS WELL AS TIME-HONOURED STANDARDS.

Aimed at builders, contractors, specifiers and local authority purchasing departments, the compact 100-page booklet features every product in the current Wykamol portfolio, alongside technical drawings, product guides, explanatory diagrams, and illustrations of products in application and in situ.

Insecticides, fungicides and timber and surface treatments have always been staples of Wykamol’s business, and its comprehensive range is presented in its entirety in the new catalogue. It is, however, basement conversion, damp proofing and structural waterproofing with which the Wykamol name is now broadly tied.

“There’s no ‘one size fits all’ solution to water ingress in buildings”, explains Andrew Latimer, Sales Director for the Wykamol Group. “The varying nature of different

constructions, in itself presents challenges in selecting the correct damp proofing method for the job.

“At Wykamol, no matter whether it’s a ‘twoup two-down’ with a mouldy basement, or a new-build multi-storey car park, constructed on a flood plain; we’re confident in offering the product you require and can advise you in making the right decision.”

Wykamol has invested £850k in 2016, extending its Burnley HQ to house a new powder processing and bagging plant. “The new plant is our latest forward-thinking venture – others including our state-of-the-art, in-house product development lab,” added Andrew.

“We’re now able to prepare bespoke powder formulations to customer’s exact specifications, such as cement waterproofing powders, thermal renders, specialist structural grouts and more.”

To find out more about Wykamol, visit www.wykamol.com and, to order your free copy of the new Wykamol catalogue, email salesdepartment@wykamol.com or call 0845 400 6666.

Wykamol – Enquiry 92

AluK help future proof school

The Welsh Government’s 21st Century Schools Programme aims to deliver effective learning environments and to develop best practice in school design. AluK systems were specified for Ysgol Maes Y Gwendraeth’s new Design and Technology building. The architect was looking for a slender selection of profiles that would complement the expanse of brickwork. In total, approximately 340m2 of aluminium profiles was used, with 105m2 used in the AluK SL52 curtain walling system, 215m2 for the AluK top hung 58BW window systems, as well as 20m2 in the AluK single GT55 TB door systems.

AluK – Enquiry 93

BIM objects and NBS Specifications now available for alsecco

alsecco (UK) Ltd has launched Building Information Modelling (BIM) objects for a selection of its external wall insulation and render-only façade systems, plus NBS Specifications are now available for all its façade systems too.

Available to download from www.nationalbimlibrary.com the new BIM objects include alsecco’s Basic 1, Basic 4, Ecomin 300 and Ecomin 400 external wall insulation systems as well as alsecco’s Flexewall render-only system.

NBS Specifications are available for the full range of alsecco’s external wall insulation and render only façade systems. For more contact technical@alsecco.co.uk.

alsecco – Enquiry 94

Outstanding return from Kingspan

A new study from Sweett Group has demonstrated that by specifying the Kingspan TEK Cladding Panel over traditional steel frame wall systems, it is possible to reduce wall thicknesses and increase usable space within commercial properties. The report shows that this can lead to a Return on Investment (ROI) of over 1000% on the cost of the panels. The ‘Real Value of Space’ research was commissioned by Kingspan Insulation. The summary and full report are available to download for free on the Kingspan TEK website: www.kingspantek.co.uk/realvalueofspace

Kingspan TEK – Enquiry 95

Lunar copper

AT THE HEART OF THE RENOVATION AND UPGRADING OF ‘THE MOON’ CHILDREN’S ART CENTRE IN THE BELGIAN CITY OF MECHELEN IS A NEW, SMALL THEATRE COMPLEX – A GOLDEN CUBE DEFINED BY ITS EXTRAORDINARY, CREASED NORDIC ROYAL COPPER ALLOY CLADDING.

The project’s designers, Antwerp based import.export Architecture, were inspired by associations of ‘the Moon’ with the Apollo 11 Lunar Module and its crumpled golden metal underside. This aesthetic is presented as a contemporary reflection on the intricate stone tracery of the neighbouring medieval cathedral tower, despite being achieved within a modest budget.

The architects worked with specialist fabricators Ridder experimenting with pressing and folding flat metal over a blade, resulting in a series of gentle creases –almost, but not quite, 3-D. Then, seven different designs of panels were produced using press moulds, each with folds running across at various angles and intensities. By rotating and intermingling different panels a rich, random effect was created. The verticality of the overlapping panels is

retained, giving structure to the facades, but most transverse joints are not horizontal, further fragmenting the surface.

Nordic Royal is produced by Aurubis, part of the world’s leading integrated copper group and largest copper recycler. Nordic Royal is an innovative alloy of copper with aluminium and zinc, giving a rich golden through-colour that is very stable. The surface retains its golden colour and simply loses some of its sheen as the oxide layer thickens with exposure to the atmosphere, resulting in a protective matt finish. It behaves differently to other copper products over time and does not develop a blue or green patina.

Other copper alloys from Aurubis include Nordic Bronze and Nordic Brass – now also available pre-weathered. In addition to Nordic Standard copper, other Aurubis Architectural surfaces include Nordic Green and Nordic Blue factory-applied patinas - developed

with properties and colours based on the same brochantite mineralogy found in natural patinas all over the world. Nordic Brown pre-oxidised copper gives either light or dark brown oxidisation that otherwise takes time to develop in the environment.

Aurubis – Enquiry 96

Bridging the insulation gap

SOME NEW BUILDS ARE FAILING TO MEET THIS EXPECTATION DUE TO UNFORESEEN HEAT LOSS THROUGH THE BUILDING’S EXTERNAL ENVELOPE. ANDREW ORRISS, HEAD OF BUSINESS DEVELOPMENT AT SIG360, EXPLAINS HOW THE CONSTRUCTION INDUSTRY CAN ELIMINATE A COMMON ISSUE THAT RESULTS IN THIS HEAT LOSS, IN A BID TO HELP COMBAT THE ALREADY GROWING PERFORMANCE GAP SOMETIMES SEEN IN TODAY’S NEW BUILDS.

Thermal bridging, also referred to as ‘cold bridge’, arises when gaps feature in a building’s insulation. Where this occurs the cold areas between the thermal products can produce internal condensation, potentially resulting in mould growth and proving costly for the building owner to repair.

The reveals around windows and doors, junctions between walls and floor, or walls and roofs, and poorly insulated structures that penetrate a building, i.e. a concrete balcony, are common areas where thermal bridging occurs. While this problem is more frequently seen in older buildings, some new builds are experiencing the same problems due to poor designs, poor workmanship or a lack of knowledge on how to install certain thermal products.

Although Approved Document Part L of the Building Regulations requires “the building fabric [to] be constructed so that there are no reasonably avoidable thermal bridges in the insulation layers caused by gaps within the various elements”, some house builders still struggle to get the detail correct.

In turn, this often creates a variance between the ‘as designed’ and ‘as built’ performance, buildings underperform thermally – more commonly known as the performance gap. Over the years there has been substantial research into this performance gap, led by the Zero Carbon Hub (ZCH). Originally set up to achieve the Government’s target of the

zero carbon homes scheme, the ZCH also worked closely with the construction industry to raise building standards.

Its research into the performance gap led to the creation of the Builder’s Book, a guide on how to improve the quality of newly built homes, with a focus on comfort levels and energy bills. The diagram-led guide demonstrates how to deliver good practice and eliminate certain issues, including thermal bridging. Unfortunately, the Government’s decision to withdraw the organisation’s funding in March this year will see the great work carried out by ZCH come to an end.

Along with the scrapping of the Green Deal and the elongation of the Energy Companies Obligation, the decision to close the ZCH highlights the Government’s failure to commit to a long-term carbon agenda, as well as its failure

to recognise the important work done by the organisation to improve energy efficiency and overall building standards. In light of this, there are steps house builders can take.

By taking a ‘fabric first’ approach, where the building’s external envelope is prioritised in the design and construction phase of a build, house builders can guarantee their property is well built, thermally efficient and doesn’t require expensive renewable energy systems to make up for any unexpected heat loss.

By prioritising the energy efficiency of a building, the construction industry can continue the great work of the Zero Carbon Hub to eliminate common problems such as thermal bridging altogether, and continue its commitment to improve the performance of UK homes. SIG360 – Enquiry 98

Geberit’s reliable and innovative sanitary and piping systems provide the ultimate solution for better acoustics. We cover the complete solution, from supply through to sanitary and drainage, to ensure that everyone gets a good night’s sleep whenever water passes through the building. For acoustically optimised sanitary installations, find out more from the experts. → www.geberit.co.uk/silence

SIG360 Provides Insulation Support for Residential Project

AN INNOVATIVE OFFERING BY SIG INSULATION HAS PROVIDED COST AND SPACE SAVINGS FOR A NEW RESIDENTIAL PROJECT IN WARWICKSHIRE.

The technical experts at SIG360, who offer energy efficiency expertise for new build and retrofit projects, have provided insulation guidance for the four-bedroom family home in Wellesbourne, Warwick.

Appointed by the project’s developers Harrison Projects Ltd, the SIG360 Technical Centre was tasked with ensuring the building met the Approved Document Part L of the Building Regulations without using products that would add to the width of the walls,

reducing the internal living space available. Due to the 100mm cavity width already in the property, SIG360 was required to find a solution that would ensure the correct U-Values were achieved, without using thicker insulation products.

By specifying a new fulfil Celotex 100mm cavity wall insulation product, the energy experts were able to guarantee the house met its desired thermal performance without adding to the cavity width, maximising saleable floor area.

Speaking on the project, Carmen Hennerly, Business Development Manager the SIG360 Technical Centre, said “As the Celotex cavity wall insulation that we specified was a new product to market, our customer wasn’t aware of the installation process.

“As part of our advisory offering, we arranged for an area representative from Celotex to come to the site. This meant we could show to the customer how the product would work and benefit their project, putting their mind at ease.”

Neil Harrison, Technical Director at Harrison Project Ltd said “By working with the SIG360 Technical Centre who recommended a new type of cavity wall insulation, we were still able to achieve the required U-Values without having to using thicker insulation and compromising on floor space.”

Work on site started in January 2016, and is expected to be complete by May 2016.

SIG360 – Enquiry 100

Kingspan rises to the challenge

Products from Kingspan Insulation’s Kooltherm and Therma ranges have helped to transform a derelict water tower in North Yorkshire into a striking family home, as featured on Channel 4‘s Restoration Man.

Timber studwork was installed on the inner face of the brick external walls, Kingspan Kooltherm K12 Framing Board was then installed between the battens. To insulate the cavity walled construction of the extension they installed 50 mm Kingspan Kooltherm K8 Cavity Board.

Both products offer premium levels of thermal performance with thermal conductivities as low as 0.020 W/m.K.

Kingspan Insulation – Enquiry 101

Cladding for sustainable housing

The Kingspan TEK Building System has helped to alleviate the pressure on an iconic build in Lewes, East Sussex, as featured on Channel 4’s Grand Designs.

Clad in CORTEN rusted steel, architect Sandy Rendel’s striking design features the Kingspan TEK Building System, comprising of structural insulated panels (SIPs), which can be pre-cut to each project’s specification. This bespoke approach, combined with the panelised system construction, allowed the construction team to establish a fast and predictable installation programme. Kingspan TEK Cladding Panel and Kingspan TEK Building System panels are now available in a 172 mm thickness.

Kingspan TEK – Enquiry 102

More lower LAMBDA products

The future path to energy efficient buildings will be revealed on 1 August when Kingspan Insulation launches four advanced, low lambda insulation products for floors, walls and soffits.

Kingspan Kooltherm K103 Floorboard, K110 and K110 PLUS Soffit Board, and K118 Insulated Plasterboard feature an advanced, fibre-free insulation core, enabling them to achieve an outstanding thermal conductivity of 0.018 W/m.K. As a result, the products can facilitate buildings to be built to the upper levels of fabric performance with minimal thickness. The launch follows the huge success of Kingspan Kooltherm K106 and K108 Cavity Board.

Kingspan Insulation – Enquiry 103

Armstrong launches an even sounder offer to acoustics

A premium ceiling tile which takes acoustic performance to new heights has been launched by Armstrong.

The new Perla OP dB 40mm mineral tile combines the high sound absorption of Armstrong’s OP range with the high sound attenuation of its dB range for ultimate acoustic flexibility.

Its launch is designed to help specifiers particularly in the education sector to reduce the amount of sound transferred from traffic routes to learning areas and also to reduce the noise of rain on lightweight roof constructions, an issue also encountered in the office sector. In this area, using the Perla OP dB tile shows a 20dB improvement compared to roof-only construction

0800 371849 | sales-support@armstrong.com | www.armstrongceilings.co.uk

Marmox Heraklith panels help restore post war church

Hundreds of square metres of thermo-acoustic woodwool boards made by Heraklith and supplied by by Marmox have been employed in the restoration of a significant church building, located in East London, following weather damage. A comprehensive repair contract carried out by Noble & Taylor, Ongar, has been completed with significant funding by the Heritage Lottery Fund to ensure the substantial lantern ceiling was restored to its former glory.

During the painstaking work a total of 135 standard Heraklith panels were consumed by Noble & Taylor’s craftsmen: being readily cut to shape on site and decorated as desired by the consultants to match as closely as possible the original decorative scheme.

T: 01634 835290 E: sales@marmox.co.uk www.marmox.co.uk

Armstrong Ceilings has launched Perla OP dB - a tile combining two criteria of acoustic performance.

Getting it right from floor to ceiling

INTERIOR TRENDS HAVE ALWAYS BEEN FAST MOVING AND MANUFACTURERS HAVE TRADITIONALLY WORKED HARD TO STAY AHEAD OF THE CURVE. THE RESULT IS AN EVER-INCREASING RANGE OF INTERNAL SOLUTIONS FOR EVERY ASPECT OF A PROJECT, NO MATTER HOW BIG OR SMALL.

The ceiling tile market is surprisingly diverse with numerous solutions for different applications and budgets.

David Loasby-Whittle, Category Manager for Sektor – the interiors brand exclusive to CCF – says that as ceilings have grown to be a more central consideration of most interiors fit-outs, the market has developed to offer a more diverse range of materials and finishes.

Furthermore, as buildings have become ‘smarter’ in commercial sectors, ceilings have become a way of concealing extensive cabling and as a result, are more ‘front of mind’ than ever before for specifiers, contractors, and end-users alike.

“The most popular option continues to be mineral tiles,” he explained. “This trend can mainly be attributed to their affordability and the ease of sourcing replacements if needed.

Plus, modern mineral tiles are available in a broader range of finishes and can achieve certain acoustic and fire ratings. Clean, white, sandy finishes are now standardised and act as the ideal blank canvas.

“Alternatively, opting for a slightly higher quality mineral tile with a fleece finish can mean added benefits. For instance, they can improve light reflection, creating a brighter and more stimulating environment which is of course an advantage when working on projects that demand a high-end finish.

“There are also perforated or fissured mineral tiles and, thanks to modern manufacturing processes, these are fresh and contemporary looking with a fine granulated or needled appearance. They can also offer a solid all-round performance and

deliver greater sound intelligibility which is ideal for busy offices or communal areas

“Soft rock and glass fibre tiles are often preferred where additional measures to achieve a high standard of acoustic performance or fire safety ratings are needed. For example, they’re excellent in educational facilities where sound absorption and attenuation rates are vital to the learning environment. This of course also applies to large offices, particularly those with open plan layouts, and other public facilities such as libraries.

“Metal ceiling tiles are still reserved for highend specifications. Not only will a metal tile allow for a monolithic look but it’s likely to be a long-lasting investment with little need for maintenance. However, specifiers must take into account that metal tiles need a specialist installer which will again, have implications on the cost.”

Sektor

Sektor

The same is true for other product areas, such as lighting. Power management company Eaton was selected by the UK’s largest commercial property company, Land Securities, to create a unique lighting solution for the landmark New Ludgate buildings on the strength of its ability to design and manufacture a bespoke lighting solution.

The Priam LED was developed exclusively for this project by Eaton at its UK manufacturing facility. It provides Land Securities with a lighting solution that blends seamlessly into the contemporary interior of the two buildings as well as meeting the rigorous technical requirements relating to output, glare, efficiency and luminosity.

Eaton’s challenge was to create a linear LED solution that could be incorporated uniformly into ceiling tiles throughout the office areas to provide a consistently high quality of light. In response, Eaton designed the Priam LED family of fittings, based on an innovative ‘cassette-style’ concept that would enable simple installation options in harmony with the sweeping curves that characterised the layout of the buildings.

By integrating the luminaires into the ceiling tiles, they become almost unnoticeable when switched off. Incorporating the latest LED technology and micro-polymer materials, the Priam LED offers even distribution of light while eliminating the need for traditional louvered fittings that could detract from the sleek appearance of the interior.

Delivering a speedy project completion together with ensuring that quality is at the forefront of what you do in any market is never easy.

When an opportunity came along for Marineware who are an AkzoNobel

Distributor, to run some product evaluations with one of the leading interiors companies in the UK the chance was too good to miss. It would be an opportunity for AzkoNobel’s Speed and Quantum to really shine.

In the initial trials, the company used Quantum IS160 – a 2K PU Acrylic Isolating Sealer, together with evaluating Quantum Q-T260-30 – a 2K PU Acrylic Clear Semi-Gloss Topcoat. The evaluation also tested Quantum Color QC-IP350 Isolating Primer, Speed SP-S191 Clear Sealer and Speed SP-T290-90 HighGloss Topcoat.

During the tests the coatings were applied on various selections of wood and on all samples the products gave a super-fast build with excellent clarity. The gloss levels proved to be simply outstanding.

There are a lot more factors to consider for architects and specifiers these days.

For example, a special event about creating dementia friendly environments, hosted by Johnstone’s Trade and supported by the Dementia Action Alliance, brought experts from across a number of industries together recently for a highly informative seminar and networking event, where delegates discussed how to create dementia friendly buildings of the future.

Representatives from Johnstone’s took the opportunity to speak about the many ways paint and wall coverings can be used to help those living with dementia to feel comfortable and safe in their surroundings, drawing on the company’s long history of working to dementia-focused design briefs in care homes and hospitals around the UK.

Advice on dementia friendly design also came from flooring company Polyflor, Panaz fabrics, David Phillips Furniture, Find Signage, and Lighting for Health.

Eaton

AkzoNobel

Pendock boosts retail environment at Booths

Booths has relocated one of its stores to Poulton-le-Fylde and selected of high quality column casings from Pendock for the interior fit-out. Pendock supplied nine column casings to surround the standard structural steel sections: three oval in appearance and the other six circular. For continuity of style, both types are clad with attractive brushed finish aluminium bonded to the plywood casings up to one metre in height, while above this a RAL 7037 Dusty Grey shade of the company’s Mouse Laminate was specified, rising to ceiling height. Pendock’s column casings are available with a very wide selection of finishes and can incorporate lighting or other services.

T: 01952 580 590 E: sales@pendock.co.uk www.pendock.co.uk

CDUK makes impact for lawyers

Glacier White Corian from CDUK has been used to create a stunning centrepiece reception desk for the City of London office of international law firm Loyens and Loeff. The entire front of the counter was clad in 6mm Glacier White Corian with a feature backlit logo. To achieve the backlighting effect, the Corian was bonded to an MDF substrate with routering through the MDF removing half the thickness of the Corian, allowing light to pass through. All computer equipment was housed within the oversized Corian desk.

CDUK – Enquiry 114

Indoor blind with Glare Control 3

A new fabric for interior blinds, which combines light and heat control properties and retains good indoor to outdoor visibility, has been unveiled by Hunter Douglas. Sunscreen Panama Chrome uses fibreglass and PVC to provide high levels of durability and also achieves a solar reflectance value of more than 75% - the highest degree for indoor solar control fabrics. Available in five colours – white, white linen, white pearl, black pearl and black –the range has BREEAM-NL/EN145032-based Glare Control 3, which is the highest class for indoor blinds with indoor-to-outdoor visibility.

Hunter Douglas – Enquiry 116

New Lexe seating collection

A fusion of classic and contemporary design is successfully brought to life in a striking new upholstered seating collection unveiled by Lyndon Design. Boasting armchair and sofa options, Lexe is a classic piece designed to add luxury and panache to traditional and contemporary interiors throughout hospitality and corporate settings. Lexe provides designers and specifiers with tremendous scope and choice. Available as a compact sofa, large sofa and matching armchair, it can be upholstered in any fabric or leather and comes with a European Oak or American Black Walnut under frame

Lyndon Design – Enquiry 112

The Queen of Theme

Sam Kopsch is an interior designer who has panache, imagination and the guts to be really bold when needed and when she needs top-end design coupled to high quality she inevitably turns to Gerflor. A perfect example of this relationship is the refurbishment of 20 St Dunstans Hill in the City of London, where the talents of SKS and Gerflor would really shine. The project would entail some 2500m2 of Gerflor’s stunning LVT Creation and GTI flooring providing the perfect look and practical solution that SKS were seeking.

Gerflor – Enquiry 113

Intelligent lighting from Schlüter-Systems

Schlüter-LIPROTEC is an intelligent lighting concept that combines lighting and profiles within the tile and stone covering.

A choice of indirect or direct light is available with Schlüter profile technology, allowing you to emphasise curtain walls and illuminate stairways, foyers, bathrooms and more, all with an innovative, unique appearance.

Intelligent receivers control the LED strips and pre-programmed colour changes can be

Make things quieter with modulyss

With the ability to reduce noise by up to 50% and showing a 15% improvement in the absorption of impact sound, dBack equipped carpet tiles from modulyss provide specifiers and designers with a solution to one of the most common problems in commercial interiors - background noise. Specifying modulyss carpet tiles with dBack is a great way to deal with the problem without resorting to acoustic underlays, which add complexity and expense. dBack uses a dense recycled polyester felt to provide sound absorption and featuring 70% recycled content.

modulyss – Enquiry 117

selected. If your client is looking for a particular ambiance or to bring brand colours into the design, then the system can be programmed from 16 million colours.

Suitable for moisture-rich rooms, the LED strips are completely encapsulated and conform to IP65, allowing subtle detail to be incorporated into the smallest rooms in the house, hotel, or wherever your imagination takes you.

Schlüter – Enquiry 115

Lamp Factory, London creates ‘brass work’ mini collection

THE LAMP FACTORY, LONDON, MAKER OF FINE QUALITY LIGHTING HAS INTRODUCED FOUR STUNNING NEW LAMPS TO THEIR RANGE.

Called the brass work collection, it features The Jasper Bar Lamp, the Connaught Double Bathroom Light, the Cambridge Bookcase Light and the elegant Napier Floor Lamp, four distinctive new designs that share the same Lamp Factory values; attention to detail, craftsmanship and quality.

The elegant Jasper Bar Lamp has been handcrafted from a striking combination of solid brass and walnut to provide a sturdy, luxurious statement lamp. The Connaught is well designed, refined solid brass light available in single or double lamp format.

The Cambridge Bookcase Light is a beautifully engineered wall lamp with wonderful wingnut detailing created from

a collection of handmade solid brass components. The Napier Floor Lamp is the fourth new edition to the lamp factory range, it’s a charming, understated floor lamp featuring a reverse tapered body/neck that flows elegantly into a tripod base.

Russell Sidney, Managing Director commented: “As we come into our eighth year I’m extremely pleased on how the business is progressing and the high quality of the work my team is producing.

“Every day throws up a new challenge due to the requests we get for bespoke designs and solutions, but I can honestly say I love it, coming up with a solution the customer is pleased with gives me great satisfaction.”

Bespoke ceiling design for barn conversion

In addition to the range of wall, floor, table and ceiling lamps, the Lamp Factory, London undertakes restorations and conversion work.

Factory – Enquiry 118

A CONVERSION OF AN EARLY 20TH CENTURY BARN FEATURES AN INTRICATE CUSTOM-MADE SOLID WOOD FEATURE GRILL PANEL CEILING, BESPOKE DESIGNED BY THE EXPERT HUNTER DOUGLAS TEAM.

Hunter Douglas was commissioned to manufacture and supply 245m2 of the grill panels to create an individually designed ceiling that softened industrial-style roof of the 600m2 single-storey building.

Using ayous solid wood stained to look like oak, the aesthetically attractive fire-retardant grill system comprises 35mm x 35mm slats with 17mm gaps, which adds light and airiness to the scheme.

The solid wood system was fitted between a series of roof light panels, while roof windows also ensure maximum daylight can flood the space.

The panels were fitted at different angles and orientations, to create the required aesthetic effect. A patented clip is used to secure the panels to the sendzimir galvanised steel suspension rails, to complement the industrial look and feel.

Juliette Halliday, of Hunter Douglas, said: “This was another example of Hunter Douglas team using its extensive expertise to create a completely bespoke grill panel system for a client. It was a challenging design to recreate because of the directions in which the panels were laid but the team was able to work closely with the installers to ensure that the integrity of the architectural concept was maintained throughout.”

Hunter Douglas uses only the finest quality of wood in the linear wood ceiling system. From raw timber to finished ceiling system, the company’s production process is carried out with the latest computer controlled machinery and closest supervision to ensure a high quality product.

Douglas – Enquiry 119

Lamp

Hunter

Fermacell helps Scotts break the boundaries

TIMBER FRAME MANUFACTURER SCOTTS OF THRAPSTON HAS USED FERMACELL ON A PIONEERING SCHOOL BUILD.

ypsum fibre dry lining boards from Fermacell have helped a specialist timber frame manufacturer make a promising start in a new sector.

Scotts of Thrapston in Northamptonshire have 95 years’ expertise in the equestrian and garden buildings sector but recently decided to try and break into the education sector by supplying modular classroom buildings.

They specified 153 of fermacell’s 1200mm x 2400mm x 12.5mm boards for their first such project, Weldon Church of England Primary School, in their home county, and have not looked back since, also using fermacell for another school and an office building.

The fermacell panels were used to line the walls and ceilings of a £175,000 replacement for a 20-year-old modular building at Weldon in Corby, where pupil numbers have doubled to 200+ in just over 40 years, and have been used throughout the classroom, a group room, lobby, toilets and storeroom.

The 18.5m x 6.5m building, which is also clad in timber and roofed in coated steel profiled panels, was constructed as a flat pack over two weeks at Scotts’ production facility in Thrapston, then transported by truck to Weldon and erected by a team of four men using an all-terrain fork lift truck in just six weeks during term time.

Scotts estimate this is just a fraction of the time it would have taken for a traditional bricks and mortar build, saving contractors and therefore clients considerable amounts of money and reducing reliance on good weather.

The new, well-insulated building is more than double the size of its predecessor, which even lacked running water, and makes use of full-length windows to maximise natural daylight and reduce the school’s reliance on artificial lighting.

Fermacell – Enquiry 120

Multi-purpose acoustic solutions

The new sports complex at Corelli College in London features ROCKFON ceiling throughout to provide the required acoustic control and satisfy BB93 Building Regulation standards.

ROCKFON Samson wall absorbers were chosen for the main sports hall because they deliver exceptional acoustic comfort, are very strong, provide the highest fire safety and are easy to install and maintain. The college’s showers and changing areas feature ROCKFON Koral ceiling tiles, also offering the highest Class A sound absorption. ROCKFON Artic was installed to provide the required sound absorption in circulation areas.

ROCKFON – Enquiry 121

Cladding solution from IDS

The new Altro Whiterock range, Altro Fortis wall cladding, provides a cost-effective, ultra hard-wearing solution for walls, corners and doors in high traffic areas such as schools, hotels, leisure centres and any other environments prone to wear and tear. Quick and easy to install, Altro Fortis does not require any specialist training, tools or certification and is backed by a 20 year guarantee. Strong, durable and impact resistant, the lightly textured surface of the Altro Fortis uPVC sheets offer enhanced protection from impact and scuff damage.

IDS – Enquiry 122

Flooring rides high at cycle shop

High design luxury vinyl tiles from Polyflor’s innovative 2mm gauge Affinity255 PUR collection were recently installed at Tredz cycle shop in Swansea to give a brand new look to their shop floor area. Approximately 400m² of Affinity255 luxury vinyl tiles in Flamed Chestnut were installed by local flooring contractors Artisan Flooring in the specialist shop selling bikes, cycling equipment and accessories. The 16 authentically reproduced wood plank designs within the Affinity255 collection replicate the natural variations found in solid wood through the use of tonal hues and surface textures.

Polyflor– Enquiry 123

The great outdoors with AkzoNobel exteriors

IT’S AN OLD ADAGE, BUT YOU CAN’T BEAT QUALITY. GOING DOWN THE CHEAP AND CHEERFUL ROUTE MIGHT BE OK FOR BAKED BEANS, OR THE ODD PAPERCLIP, BUT IT SIMPLY WON’T DO WHEN YOU NEED A SUPERIOR PRODUCT TO DELIVER A PREMIUM FI NISH. AT BLACKBURN-BASED AKZONOBEL THEY’VE IDENTIFI ED THIS PROBLEM AND HAVE NOW GARNERED THEIR SUBSTANTIAL EXPERTISE INTO PRODUCING THROUGH THEIR SIKKENS BRAND, A NEW ALL-EMBRACING WOOD COATINGS BROCHURE AIMED DIRECTLY AT DELIVERING TOP QUALITY PRODUCTS FOR THE EXTERIORS MARKET. SMART MOVE!

The new AkzoNobel exterior wood coatings brochure is a collection of high quality products that covers; impregnating primers, primers, sealants and fi llers, together with providing a one-stop solution for mid-coats, topcoats, maintenance products, oils and care products…all in one easyto-use reference guide.

range of products for factory applications, delivering a host of solutions for windows, doors, conservatories, together with stable wooden elements, cladding and garden structures, decking and non-stable wooden elements. There are also a number of products available for a wide range of timber substrates; hardwood, softwood and Accoya. A large crosssection of AkzoNobel paints and products have an abundance of industry approvals and can be applied by a variety of methods, whether it be; dip, flow coat, spay, brush or vacuum coating. They can also be tinted to a wide range of colours for both opaque and translucent finishes.

The AkzoNobel Wood Coatings Exterior collection of high quality products also delivers a high-performing topcoat collection with RUBBOL® WF 382 and RUBBOL® WF 387, both of which have DURAFLEX TECHNOLOGY delivering optimal durability whilst demonstrating long term elasticity.

The list of applications in the new AkzoNobel ‘Exteriors’ brochure is varied as it is vast and ranges from… windows, exterior doors, conservatories through to simple garden trellis work, wooden fl oors, cladding, matchboards/bargeboards, together with all types of timbering and sheds. It’s a fully encompassing selection of high quality wood coatings for a myriad of exterior wood applications.

Clive Dove, Technical Service Manager, Wood Finishes and Adhesives from AkzoNobel Wood Coatings said, “this new collection has brought together the best and most successful exterior products we have. It’s unifi ed them into a structured and comprehensive range, as well as adding new and innovative products where needed”. Clive Dove continues, “The product range is versatile in performance, appearance and covers the various application methods that applicators may employ, including fl ow coating, dipping, spraying and brushing”.

The primers and impregnating products from AkzoNobel supply a raft of quality solutions for a vast array of applications and uses. The CETOL® WP products are a range of translucent impregnating primers delivering impregnating and priming all in one easy step. This Includes base stains which protects against blue stain fungi and/or rot and are water-borne with an acrylic binder. They are ideal products for stable, semi stable, nonstable wooden constructions and supporting this is RUBBOL® WP 151, a two pack PU opaque primer with the best insulation against discoloration of soft and hardwood, it’s high fi lling with good pore wetting and is water-borne with an Acrylic-PU binder and again perfect forstable, semi stable wooden constructions together with MDF and HDF.

This pattern of a one-stop shopping basket from AkzoNobel happily doesn’t end there. Many items that end-up looking fantastic on the final project or structure start life being prepared and finished in the factory. AkzoNobel supply a large and varied

It also delivers high resistance to cracking, premium UV protection through innovative new light stabilisers and excellent resistance against the impact of extreme weather.

AkzoNobel also provide a host of maintenance products because maintained wood lasts longer. Regular cleaning and maintenance are essential to be able to enjoy the long-term pleasure of beautifully coated joinery. After all, a regular maintenance and cleaning schedule allows the redecoration intervals to be maximised.

The Sikkens range of maintenance products is deliberately co-ordinated to match the factory applied topcoats, both for gloss level and colour accuracy. This includes an on-site primer RUBBOL WP105 and RUBBOL WF 310 or WF 318, opaque topcoats; all for brush application, which are available in handy smaller one litre pack sizes. Add to this their base stain CETOL WP 511 and CETOL WF 910 or WF 915 translucent topcoats which are suitable to maintain the DURAFLEX factory applied translucent topcoats and it seems very ‘clear’ that this exterior range of products from AkzoNobel ticks all the boxes.

AkzoNobel is a leading global paints and coatings company and a major producer of specialty chemicals. Calling on centuries of expertise, they supply industries and consumers worldwide with innovative products and sustainable technologies designed to meet the growing demands of our fast-changing planet.

To see the list of UK and Ireland distributors www.sikkens-wood-coatings.co.uk

AkzoNobel – Enquiry 127

Looking at life from the inside with AkzoNobel interiors

Making life simple and being able to see a range of products on of fer at a glance can be a challenge for many companies Not so at Blackbur n-based AkzoNobel as they’ve gar nered their substantial expertise into one new all-embracing brochure aimed directly at the interiors market

The AkzoNobel interior coatings ranges from across Europe have now been brought together into one new single brochure The list of applications is varied as it is vast and ranges from fur niture through to kitchen cabinets, bathroom cabinets, table tops, shop-fitting and flooring

The breadth of technical knowledge and skill AkzoNobel also delivers a host of available solutions including PU acr ylic, PU Alkyd and Polyesters through to Acid Curing Waterbor ne, UV Curable together with Oils and Waxes

Over the ‘try-line’ for AkzoNobel

The grunt and grind of professional rugby league may not be everyone’s half time orange, but as a player for over 10 years in this male maelstrom, Adrian Goodall of Herts- based A Plus Joinery in Harpenden knows what kind of graft and commitment it takes to get over the business try-line. It’s this kind of dedication to excellence that also ensures that A Plus Joinery only deal with quality, reliable suppliers like AkzoNobel.

Adrian Goodall commented, “My background is building and I had been looking for three years to buy a quality joinery business.’

A Plus Joinery would now see regular production meetings and the organisation of the work-flow would be smoother and more focused. It’s this concentration that would lend itself to Adrian ensuring that Blackburn-based AkzoNobel would be supplying a line of highend, reliable products to guarantee that the levels of excellence would be consistent.

Carl Circus, UK Distribution Manager, AkzoNobel Wood Coatings said, “A Plus Joinery have been a good, loyal customer for many years. As well as supplying all their product needs, we offer a full back-up advice service regarding all technical aspects of design, build, coating, installation and maintenance of the joinery they produce”.

Adrian Goodall commented, “We recently supplied a new client who was developing a large detached house in the Whipsnade area. He wanted an existing number of Meranti redwood products on the structure to be a lighter oak colour. Carl Circus from AkzoNobel came to a meeting and suggested their Sikkens Cetol WF 952 product. We were also able to use a new water-based dipping system prior to Sikkens Cetol WF 952 to create the desired look and finish. Our client wanted a satin sheen finish, not a gloss. He also wanted to highlight the grain in the timber. The Sikkens Cetol WF 952 system did this perfectly”.

CETOL® WF 952 is a satin sheen joinery product that provides a spray applied translucent mid and top coat for exterior wooden joinery components. offering the highest level of UV protection and long-term elasticity.

Earthborn revamp Ecopro range

Ecopro Matt Emulsion, Lo Sheen Emulsion and Eggshell have been repackaged and are now available in all 98 shades of BS4800, plus black and white. The new palette offers a huge choice and enables colour matching with other decorating features.

The Ecopro Emulsions are available in 5l and 10l plastic tubs while the Eggshell is in 750ml and 2.5l tins. The Ecopro range is uniquely formulated for high performance and all three products are totally oil and acrylic free, with minimal VOCs.

Eggshell is a new addition to the range. Suitable for use on interior walls, ceilings and woodwork, it’s a complete all-rounder. It dries to an attractive sheen

that is durable, washable and scuff resistant. Ecopro emulsions are water-based, low odour, environmentally sound alternatives to conventional wall and ceiling emulsions. The Matt option is particularly suitable for use on new plaster, while Lo Sheen is formulated for enhanced durability and washability, making it suitable for higher traffic areas.

Complying with the strict EU Ecolabel standards, the range is not only eco friendly but newly decorated rooms can be brought back into use quickly because the paints do not give off any harmful emissions or odours.

Earthborn – Enquiry 130

Trims on target in third Sandtex Trade video installment

and preparation and then gives an insight into the different requirements of various substrates.

The attributes of products in the trims range, including Sandtex Trade Flexigloss X-tra, Sandtex Trade Eggshell X-tra and Sandtex Trade Metalgloss X-tra, are also explored.

Sharon Smith, Sandtex Trade Brand Manager, said: “Trims such as window frames and guttering are an integral part of any exterior redecoration.

“As part of the Sandtex trade system approach, specific products for trims are formulated to provide superior protection, as well as a fantastic finish.

Specifiers can gain an insight into how to achieve the best finish for exterior trims in the third episode of the ‘This Is Sandtex Trade’ video series.

Kevin O’Donnell, Product Trainer for Crown Paints, sets out the solutions for wood, metal and PVC-u using Sandtex Trade’s extensive range in this latest short film.

The video starts with on overview of priming

Enhancing concrete structures

Colorite Beton is an anti-carbonation acrylic paint with a smooth finish for coating concrete structures and reinforced concrete, providing a decorative finish to exterior facades. Its semi-transparent properties allows the buildings natural finish to remain visible, without hiding surface structure. This exterior use coating protects against sunlight, CO2 and SO2 damage and is resistant to climatic conditions such as smog and salt. Elastocolor Paint is an elastomeric, crack bridging protective coating, perfect for cracked facades and for protecting against further cracks on deformable substrates.

Mapei – Enquiry 133

“This latest video offers a great way to show how this approach works and provides specifiers with the reassurance of selecting time-proven and trusted coatings, which offer optimum performance.”

All the videos include a wide-range of information presented in the form of studio demonstrations and on site situations.

Sandtex Trade – Enquiry 131

Photograph courtesy of Carmo Wood, Portugal and Câmara Municipal de Arouca, Portugal

Inside products insight

The client, Carmarthenshire County Council, required all new build blocks to achieve BREEAM ‘Excellent’ ratings as part of the project’s sustainability obligations.

AluK systems were specified for Block 21 of the development which incorporates the school’s new Design and Technology building, designed by Lawray Architects. The team of architects were looking for a slender selection of profiles that would complement the expanse of brickwork in the new building. In total, approximately 340m2 of aluminium profiles was used, with 105m2 used in the AluK SL52 curtain walling system, 215m2 for the AluK top hung 58BW window systems, as well as 20m2 in the AluK single GT55 TB door systems, all of which were installed throughout Block 21.

The project is BIM compliant, necessitating the entire supply chain to deliver the required data. AluK was able to exceed project requirements as their standard BIM components are level 2 compliant.

In addition to BIM compliance, safety was a top priority when it came to product specification, with Secured by Design (SBD) accreditation required throughout. Initially, the team at Lawray were unable to find a double

door with test data available to meet SBD requirements. However, the manufacturer was able to provide the required data by carrying out general testing at their South Wales Research and Development (R&D) facility specifically in regards to the 20N opening force of the door, as required under Building Regulations: Part M, whilst incorporating a thermally broken profile.

Further collaboration led to AluK providing additional support in the installation of a bespoke solar shading system.

The Block 21 phase of the project was completed in May 2015 with the overall development scheduled for completion in April 2016.

Paul Groves takes a look at this month’s product news

Ysgol Maes Y Gwendraeth, a new secondary school in Llanelli, South Wales, received an investment of £18 million from the Welsh Government’s 21st Century Schools Programme for the development of education buildings to serve 1000 pupils.

DELIVERING EFFECTIVE LEARNING ENVIRONMENTS AND BEST PRACTICE IN SCHOOL DESIGN IS HELPING TO CREATE A SUSTAINABLE CONSTRUCTION SYSTEM OF EDUCATION BUILDINGS IN WALES THAT MEETS NATIONAL BUILDING STANDARDS AND REDUCES THE RECURRENT COSTS AND CARBON FOOTPRINT.

Myson FLOORTEC is A-rated

A Myson FLOORTEC underfloor heating system has been installed throughout a new build property after Hayward Smart Architects designed a home with an A-rated Energy Performance Certificate (EPC).

The property also boasts a whole house ventilation system with heat recovery, a rainwater-harvesting system to service the toilets, washing machines and outside taps as well as triple glazing and high quality insulation. The culmination of these energy saving features and the Myson FLOORTEC heating system has resulted in the property being one of just

0.04% in the country to achieve an A-rated EPC. Myson FLOORTEC is one of the most energy efficient and versatile heating systems on the UK market. As well as being designed to work with all floor types, including solid, suspended, and floating floors, Myson’s new MICROBOARD fixing system also allows underfloor heating to be retrofitted in existing properties.

For extension and renovation projects Myson also offer FLOORTEC single room heating packs, which contain everything needed to provide additional warmth in rooms of up to 40m2, in one box. This allows single room extensions in places such as the kitchen or conservatory, where wall space can be at a premium, to be easily provided with comfortable warmth.

“We have also recently developed a new range of underfloor heating pipe, PEXcellent 5, that will not only give installers added confidence that they are providing the very best product, it will also provide a long lasting system for end users.” Michelle Taylor, Product Manager for Myson Myson – Enquiry 135

Geberit helps stately home go green

buildings, Saltram now enjoys heating and hot water courtesy of a biomass system, consisting of 220kW and 95kW boilers fuelled by pellets. A district heating system services the main house and the majority of other buildings on the site.

“We use Geberit Mapress on 95% of our jobs,” said James Howard, from Dunster Biomass, which installed the system at Saltram House. “It’s quick to install, easy to use and reliable. The fact there’s no need for hot works makes it ideal for historic buildings.

“At Saltram House, the new biomass system had to be installed within the confines of the existing building and its heating system, while ensuring that it could be easily removed if required. Faced with narrow doorways and cramped spaces, Geberit Mapress was the ideal solution.

Stirling Lloyd for school

Stirling Lloyd’s Integritank system has been specified for the waterproofing of the inverted roofs for the North West phase of the Priority Schools Building Programme.

The first phase of structural protection works was completed in March 2016, benefitting seven schools and around 4,000 school children, ready for their return after Easter for the start of summer term.

The Priority Schools Building Programme is a nationwide government initiative to improve schools that are in urgent need of repair. Under this programme, 260 schools are being rebuilt across the UK, with a completion date set for December 2017.

Authorised Contractor VolkerLaser applied the system as part of their role to provide specialist structural protection works – applying between 1,000 and 2,000m2 of Integritank at each school.

Throughout the first construction phase, as well as approximately 8,500m2 of Stirling Lloyd Integritank waterproofing being applied, over a thousand paving slabs have been laid and over 8,000m2 of vertical insulation and 20,000m2 of horizontal insulation slabs placed.

The waterproofing system would be applied directly to a zero falls flat concrete deck; Stirling Lloyd’s Integritank was selected over the original Hot Melt system as a preferred solution to meet programme requirements.

One of many National Trust premises to get a renewable makeover as part of a general drive to improve the environmental credentials of its

“The age of the building and cramped environment also meant that solder was just not an option because of the fire risk. Geberit Mapress and its press fit assembly is particularly well-suited to jobs of this nature.”

Geberit – Enquiry 136

Bituchem’s heavy duty material used to brighten road

Bituchem’s hard-wearing Natratex landscape material has been used to re-surface a road in the Woodford Bridge area of Redbridge. Approximately 6000m2 of Natratex 10mm Heavy Duty in buff was applied by Kenson Contractors to the town’s main street which offers a durable and aesthetically pleasing highway that complements the surroundings of the London Borough. The specialist heavy duty material is a development of Bituchem’s flagship product, designed especially to withstand the constant flow of traffic whilst maintaining a long-lasting natural finish.

Bituchem – Enquiry 137

A fast curing time was critical to the project, with Integritank curing in 30-35 minutes – essential for completing the waterproofing work on time and enabling other trades to rapidly access the roof to undertake their phase of the work.

In addition, Integritank was specified for its ease of application. The use of this cold, spray-applied membrane meant that it improved on-site health and safety with the added benefit of speed – achieving up to 500m2 per day – typically double the installation rate of the previously specified Hot Melt. And with BBA (British Board of Agrément) approval for use on flat roofs, Integritank met all Morgan Sindall’s requirements for the waterproofing.

Richard Woodward, site manager at VolkerLaser for the 12 sites in the North West comments: “Working together with Stirling Lloyd meant that we could deliver great results in a short space of time. We were safe in the knowledge that using Integritank would ensure valuable time savings.”

Stirling Lloyd – Enquiry 138

Geberit Mapress Carbon Steel has been chosen for its ease of installation and no hot works credentials to install a biomass system at Saltram House, a magnificent National Trust owned Stately Home in Plymouth.

Thermaskirt chosen for school

When Rostock High School in Germany undertook a major refurbishment, the local education Authority decided it should become an ‘Energie Plus’ project - a project that generates more power and energy than it actually consumes - and Discrete Heat’s ThermaSkirt was chosen as the heating solution.

To achieve ‘Energie Plus’, the school was renovated using solar PV panels to the roof and front elevation, and two wind turbines. The school also became connected to the Municipal District Heating system, using warm water from the cooling system of the nearby power station. Torens Hillinger, the school Facilities Manager explains “When the engineers decided to remodel the school, they had to also consider the heating. Radiators were not wanted as we have had trouble with space and also waste materials getting inside. Underfloor heating was not possible as the building is not new and quick on and off heating is very difficult.”

Manufactured in the UK by Discrete Heat Ltd, ThermaSkirt is a radiant heating system that is designed to replicate a skirting board trim or profile. Made from aluminium, the warm water from the primary heat source passes through integral tubes on the back of the profile. The front face then heats up and radiates heat from a low level all around the room. This not only has the advantages of providing a very evenly distributed comfortable heat, it is also very responsive to the rapidly changing heat demands of a busy school. With very low water content compared to a radiator or even underfloor heating, it is an ideal emitter for use with renewable energy or low grade heat sources such as heat pumps.

ThermaSkirt Germany suggested a new profile, Deco PR which has a unique centre mounting enabling a very quick installation. With stainless steel covers at the joints, it is a very durable and robust heating solution.

With a flow temperature of only 45°C and a return of only 35°C, the ThermaSkirt system is still able to provide enough heat to comfortably warm the classrooms to the target temperature of 20°C, even in the winter months as Rostock is on the Baltic coast.

Discrete Heat UK – Enquiry 141

The fastest door in the west

Somerset-based Garador is recognised as Britain’s leading garage door maker, but this innovative company also leads the way for fast and easy fixing.

Ordering a precision engineered Garador Up & Over door with a steel frame gives the quickest and most accurate fit possible.

You can fit the frame straight onto the brickwork with as little as 7 fixings for a canopy gear door and 11 fixings for a retractable gear door. The frame can be fitted either between or behind the opening.

With fast and easy fixing plus a wide choice of design, good pricing and time saving there is little doubt Garador’s Up & Over garage doors will remain Britain’s top selling garage door. All doors from the range also come with a 10 year warranty.

Garador’s Managing Director Simon Hipgrave says “Garador’s wide choice of designs and colours plus good pricing is a big selling point; now with our fast and easy fixing, our Up & Overs

with a steel frame will ensure Garador remains the top favourite among all builders, installers and home owners across the UK.”

Garador products are made within their own group, ensuring product quality can be maintained at all times.

Garador – Enquiry 139

Gatic CastSlot specified for Waitrose car park

to effectively manage surface water for the car park and service yard.

Gatic’s CastSlot is designed to create a continuous interception of surface water, as well as provide a discreet and durable surface opening. Manufactured in three metre lengths of galvanised steel, it benefits from fewer joints and improved flow performance. A high flow inlet and channel capacity meant CastSlot provided a tidy, unobtrusive and functional solution. The cast iron finish gives the system a highly durable and ductile iron top.

Patrick Russell from McCurdy Russell Architects comments: “The longer lengths of CastSlot made it easier to install and the product was delivered within a fast lead time of only one week. The whole process was professional and efficient, with great technical support.”

Gatic’s Slotdrain channels benefit from a unique hexagonal profile making it an extremely versatile range. A V-shaped channel base ensures a self-cleansing flow and a tapered throat helps prevent blockages.

Alumasc Water Management – Enquiry 140

GEZE UK tops the shopping list

Waitrose’s flagship store in Chester required good access and architectural glazing specialists Glassolutions had created a unique curtain wall system that allows the glass façades to visually float. Each of the main entrances feature a pair of bi-parting automatic sliding glass doors powered by GEZE’s Slimdrive SL NT drives. Part of GEZE UK’s popular Slimdrive range, the SL NT automatic operators are ideal for elegant glass façades thanks to an operator height of just 7cm, which makes it almost invisible in elevation. Slimdrive SL NT provides safe and easy access in high traffic areas.

GEZE UK – Enquiry 142

Gatic Civil Drainage was recently specified for Waitrose’s new store in Oxford for its CastSlot system from its market-leading Slotdrain range.

McCurdy Russell Architects, who specified CastSlot, required a robust, yet subtle solution

Specification easier with app

Knauf AMF asked specifiers what would make their lives easier when it came to specifying acoustic ceiling and wall solutions and as a result has launched an innovative app, AMF InfoCentre. AMF InfoCentre is intuitive and incredibly easy to use, enabling architects, acousticians and contractors to download helpful information about the whole of Knauf AMF’s product range. AMF Infocentre and Room Acoustics Calculator are available to download free from Google Play Store and Apple App Store. They are compatible with all smartphones and tablets so users can access them wherever they are.

Knauf AMF – Enquiry 143

Time saving screed solutions

Mapei’s fast track screed solutions are designed to allow resilient, textile, ceramic and wood flooring coverings to be applied within a very short time. Topcem is one solution from Mapei; a rapid drying special hydraulic binder mixed with graded aggregates and water. Topcem has a high compressive strength and can be installed thinner than conventional screeds, can be foot trafficked within 12 hours, is suitable for the installation of ceramic tiles after only 24 hours, and resilient floor coverings and wood after just 4 days irrespective of thickness.

Mapei – Enquiry 144

Flooring challenge met by Remmers

The new 1,600m 2 workshop facilities at The Trade Centre Wales in Neath, required a breathable anti-slip system to be installed due to the uncertain moisture levels of the relatively new substrate.

The installers TPS360, measured the moisture levels during the installation and to facilitate the curing process, temporary heating and ventilation systems were used to reduce any moisture present.

A FeRFA Type 3 high build floor coating system was then applied in two coats. Remmers BS3000 SG was selected as a high quality, damp tolerant resin, with a wide application spectrum and VOC free properties. ADD 250 Polymer Beads were then added to provide an anti-slip, textured finish to give a surface that remained easy to clean.

The coating system was installed to a timed scheduled which tied in with other key equipment installation phases.

Remmers – Enquiry 146

Explore colour with Antron

Antron carpet fibre, alongside ColourHive, is set to launch four key trend themes influencing colour throughout 2017, presented in Global Trends 2017/18. Based around our desire to explore, a key driver and influencer of consumer trends, Global Trends 2017/18 sees a confident approach as we embrace the latest discoveries that are shaping our future, but what impact will these changes have on design and colour? All is revealed in Global Trends 2017/18 with Antron carpet fibre presenting four themes that refocus palettes for 2017/18 around a central concept of exploration.

Antron – Enquiry 147

Solid oak floor at school

The multi award-winning Lairdsland Primary School is a contemporary building which features over 600m 2 of Junckers solid oak flooring. Following an initiative by Scottish Futures Trust to design a reference primary school for Scotland, Walters & Cohen Architects were appointed. The new school is a sympathetic and impressive addition to the locale with double height glazing and open plan spaces. Ideal for a busy school environment, Junckers’ solid hardwood floors are hardwearing and easy to care for, adding an elegant backdrop to the interior.

Junckers – Enquiry 145

Polyflor makes the grade

High performance flooring from Polyflor has recently been installed in classrooms at The City of London Academy secondary school and sixth form in Southwark, London. Around 2000m² of Classic Mystique PUR sheet vinyl flooring in the cool blue Mountain Lake shade was installed into classrooms on the first floor of the school building. Hardwearing, homogeneous Classic Mystique PUR floorcovering is also enhanced with PUR, Polyflor’s exclusive and robust polyurethane reinforcement which is cross linked and UV cured to provide superior cleaning benefits.

Polyflor – Enquiry 148

Kährs extends Classic Nouveau Collection with four new colours

KÄHRS HAS INTRODUCED FOUR NEW COLOURS TO ITS CLASSIC NOUVEAU COLLECTION. THE NEW WOOD FLOORS - IN WHITE, GREY AND EARTHY TONES - JOIN SIX BEST-SELLING DESIGNS WITHIN RUSTIC-CONTEMPORARY RANGE.

ALL OF THE FLOORS FEATURE A VARIETY OF INDIVIDUAL COLOUR AND TEXTURE FINISHES, WHICH LIFT THE GRAINING AND ENHANCE THE NATURAL LOOK.

The four new designs include pearly white Nouveau Blonde, smoky tinged Nouveau Gray, chestnut coloured Nouveau Rich and chocolate toned Nouveau Tawny. They complete Kährs’ natural spectrum, which spans snowy white to ebony tones.

Tactile surface treatments include brushing, staining and smoking, and all of the designs have a durable matt prefinish, which gives the surface a distinct lustre.

All Classic Nouveau floors are made from sustainable oak and have a multi-layered construction for optimum stability. Individual boards measure 2200/2420x187/200x15mm and feature Kährs glueless Woodloc joint for a fast, gap-free installation.

Kährs more than 150 years’ long history is lined by a row of innovations - some have revolutionised the global wood flooring

industry - as the invention of the multi-layer board and the glueless Woodloc joint. Compared to a traditional solid wood floor, the Kährs patented construction is 75% more stable.

A Kährs floor resists warping, buckling and cracking, even as temperature and humidity

change throughout the seasons. The construction creates a perfectly balanced wood floor that can tolerate even the most dramatic climate changes. This also makes the company’s wood floors the perfect partner for underfloor heating.

Kährs

– Enquiry 149

Safe restoration with FILA solutions

FILA’S SURFACE CARE RANGE INCLUDES A VARIETY OF TREATMENTS FOR FLOOR RENOVATION – FROM ROBUST, TEXTURED PORCELAIN, TO ORIGINAL QUARRY TILES AND ENCAUSTICS. ALL PRODUCTS ARE DESIGNED TO PROVIDE HIGH COVERAGE AND PERFORMANCE, WHILST PROVIDING A SAFE APPLICATION AND PROTECTING ORIGINAL SURFACE CHARACTERISTICS.

To deep clean porcelain and ceramics – including anti-slip tiles with pronounced high and low spots - options include FILAPS87. Used neat, the product removes stubborn coloured, organic stains. When diluted, it deep cleans porcelain and ceramics, as well as unpolished stone and cement tiles.

It is also particularly effective for textured surfaces with a dirt and residue buildup, where it provides a high performance clean, restoring anti-slip ratings. For acidsensitive surfaces, other options include best-selling FILA Cleaner – a concentrated neutral detergent that can also be used at a variety of dilutions to tackle different renovation issues.

After renovation, surfaces that require sealing can be treated with FILAMP90 ECO

PLUS – a solvent free protector that forms part of FILA’s award-winning Green Line. The LEED-approved sealer is designed for natural stone and polished porcelain surfaces, can be applied internally and externally, and is suitable for use on food contact surfaces. As well as safety and eco-benefits, FILAMP90 ECO PLUS can be applied - in just one application - to surfaces with residual moisture, so it cuts application time by up to 80%.

To prevent future dirt build-up on textured and natural unglazed porcelain, FILA has also developed FILASTOP DIRT. The UV-resistant treatment chemically bonds without leaving a film or altering the material’s original degree of slipperiness - as proven in tests conforming to the B.C.R.A. and ASTMC 1028- 2007 methods, and in the English Standard BS 7976 Pendulum tests.

To make an enquiry – Go online: www.enquire2.com Send a fax: 01952 234002 or post our: Free Reader Enquiry Card

FILA’s range includes 36 surface care treatments – from stone and ceramic stain proofers, to grout protectors and cleaners. All production is supported by FILA’s ISO 14001:2014 certification and the range is recommended by 220+ leading tile manufacturers and stone suppliers.

FILA – Enquiry 150

New Altro Showroom London created by Ab Rogers Design

LEADING FLOORING AND WALLING SOLUTIONS COMPANY ALTRO HAS WORKED WITH INTERNATIONALLY RENOWNED AB ROGERS DESIGN TO CREATE AN INSPIRING, INTERACTIVE NEW SHOWROOM THAT SHOWCASES A MULTITUDE OF COLOURFUL AND CREATIVE POSSIBILITIES, AND CHALLENGES PERCEPTIONS OF FLOORING AND WALLING PRODUCTS.

The innovative space was created by Ab Rogers Design in collaboration with Altro to celebrate the colour and creative flexibility of Altro’s products.

The Altro Showroom London has been created as an interactive space, with Altro’s many and varied products available to see, touch and take away, and a range of digital tools to help bring ideas to life. Resources include Altro’s digital kiosk where you can scan product samples, find out more about ranges and colour options and then email the information to your own account - perfect if you don’t want to carry samples around with you.

Altro’s new Space visualiser tool allows you to select Altro flooring and wall cladding

solutions and place them into different 3D environments, including a bathroom and commercial kitchen. The Altro Space visualiser allows you to see how Altro products and shades look like in-situ and from all angles, meaning you can choose the right options for your installation with even more confidence.

Visitors to Clerkenwell Design Week in May were the first to experience all that the Altro Showroom London has to offer. The Altro Showroom London is at 15 Clerkenwell Green. It is open Monday to Friday, 9.30am to 5.00pm, and at other times by appointment. Drop in to see us, or call 020 7490 8237.

Altro – Enquiry 151

Forbo’s floor coverings add style at Matalan HQ

AN INTEGRATED RANGE OF FORBO FLOOR COVERINGS HAS BEEN SPECIFIED AND INSTALLED THROUGHOUT MARO DEVELOPMENTS’ PRESTIGIOUS BESPOKE NEW OFFICE HEADQUARTERS FOR MATALAN AT KNOWSLEY. FORBO WORKED COLLABORATIVELY WITH THE DEVELOPER, THE MAIN CONTRACTOR MORGAN SINDALL, AND MANCHESTER-BASED PROJECT ARCHITECT FLETCHER RAE TO AGREE THE FINAL SPECIFICATION.

The key objective for office areas was to deliver a high-quality finish with a ‘wow’ factor. The Create Space collection of plain and linear patterned Tessera carpet tile ranges met all construction and performance demands and was selected for its quality, overall finish and the design flexibility offered.

Surestep and Safestep safety vinyls were installed in shower rooms, kitchens and other back of house areas where clean, crisp, slip resistant finishes were needed. For more public spaces and common front of house areas such as stairwells, where durable, resilient flooring with a more prestigious feel was required, linoleum from the Marmoleum Piano and Fresco collections was used.

The combination of performance, value for money and realism made Forbo’s Allura LVT

in an oak wood effect an ideal solution for the staff canteen. Completing the integrated floor scheme. Eternal General Purpose Vinyl was fitted in one of the meeting rooms and 12mm grey Nuway Tuftiguard was installed at the main entrance to the headquarters.

John Schofield, Morgan Sindall Senior Design Manager, said: “Forbo put a lot of time and effort into the project in terms of providing numerous samples and alternative colours. Over the last 10 years or so, whenever I have worked with Forbo on various projects over the last ten years or so, they have always provided exemplary customer service and have been great to work with.”

For more information please call 0844 822 3928 or visit www.forbo-flooring.co.uk/offices

To make an enquiry – Go online: www.enquire2.com Send a fax: 01952 234002 or post our: Free Reader

Forbo’s Create Space carpet tiles - part of an integrated floor scheme at the Matalan HQ

FDS helps former british newspaper library make headlines again

AWARD-WINNING SMOKE VENTILATION CONTRACTOR, FIRE DESIGN SOLUTIONS (FDS), HAS BEEN APPOINTED TO WORK ON A NEW RESIDENTIAL DEVELOPMENT ON THE FORMER BRITISH NEWSPAPER LIBRARY SITE IN NORTH LONDON.

Fairview New Homes is building its Edition development of 395 apartments on the site in Colindale in the London Borough of Barnet. Edition will comprise a selection of one, two and three bedroom apartments.

FDS has been appointed to design, supply, install and commission natural and mechanical smoke ventilation systems for the development.

FDS will also install its corridor environmental systems which will be used to mitigate excess heat build-up in the building’s common areas during day-to-day use, increasing residents’ comfort.

Working with the project’s designers, FDS carried out CFD modelling to justify the smoke ventilation system. The technique demonstrates the system’s effectiveness through the creation of a virtual model, which shows how fire and heat will move through the building.

Speaking on the project, Stephen Brown, Area Construction Manager for Fairview, said: “Having worked with FDS previously, we are confident the team will provide the most appropriate smoke ventilation solution to ensure the development meets all of the relevant building regulation requirements, as well as providing residents with a high performance system in the event of fire.”

Nick Waterfield, Managing Director at FDS, said “This is an exciting project to be working on, particularly as it’s on the former British Newspaper Library plot.

“For residential properties such as this, controlling temperatures in common areas is a major priority for the comfort of residents, and by including our corridor environmental system, occupants can rest assured this will be achieved.”

FDS – Enquiry 153

Axis EN wins Polish Award

Advanced’s Axis EN fire panel has won the ‘Devices and Fire Alarms Systems’ category of the Polish POLALARM Awards.

Krzysztof Dembinski from Advanced’s Polish partner Zeto-Project, said: “We’re delighted that that the experts at POLALARM recognise the features of the Axis EN fire panel. For us, it is reassuring to know that the fire safety systems from Advanced which we offer our customers are of the highest quality.”

The Axis EN is Advanced’s highest performance, EN54 approved panel range and is fully compliant with parts 2, 4 and 13.

Advanced – Enquiry 154

Park at the Ark

UK Barrier Services were commissioned to replace a pair of barriers for the ARK Conference and Events centre.

The barriers are now operated through a new wireless GSM intercom and the existing keypads. UK Barrier Services installed Magnetic Microdrive Access barriers which are specifically designed for use in high frequency sites. The Magnetic Access range not only offers a long-life cycle, great reliability and quality but also has an enduring design with extremely low operational costs. For this installation LED illuminated barrier arms were chosen to offer maximum visibility.

UK Barrier Services – Enquiry 155

Growth drives recruitment

With demand for its fire systems growing steadily in all of its domestic and international markets, Advanced has recently completed a major recruitment drive to grow its workforce by over 10% to boost its manufacturing capacity and at the same time add key talent to its international marketing and UK and US Engineering department.

Commenting on this growth Ray Hope, Advanced’s Managing Director, said: “We now have bases, partners and customers in over 60 countries worldwide and while we’ve consistently grown, some of our new product innovations are driving demand in key markets.”

Advanced – Enquiry 156

www.enquire2.com

City Exchange chooses Avire’s flexible LCD lift displays for refurb

E-MOTIVE IS2’S EASE OF USE ALSO A WINNING FACTOR. LIFT SAFETY AND COMMUNICATION SPECIALIST AVIRE HAS INSTALLED ITS LATEST LCD MULTIMEDIA DISPLAY, THE E-MOTIVE IS2, AT THE CITY EXCHANGE OFFICE BUILDING IN TRINITY LEEDS.

City Exchange’s lift service provider suggested the iS2 as a solution. As part of a general refurbishment programme, City Exchange had decided to upgrade the displays in the seven-storey building’s four lifts.

Changing graphics or information on the existing displays had proved an extremely time-consuming and costly process, with an engineer call-out needed to make even the slightest alteration.

“We were looking for a system that was easily installed and easy to use,” explained Dave Downes, technical services manager for City Exchange, “and that’s when we came across the iS2. It ticked all the right boxes.

“We’re always letting and re-letting the floors, but now we can change logos and names ourselves. It’s very flexible, so we can basically do what we need to do. To me, that was the

selling point – the fact that we could program it.”

The iS2 is the first lift display to combine RSS feed technology, wireless connectivity and ecofriendly features. The product’s screen brightness dimming, LED-backlit technology and scheduler for screen power management all reduce LCD power consumption, improving lifespan and

satisfying the green rating required by elevator OEMs. Avire is committed to innovation within the elevator industry and we invest heavily in our research and development facilities in the UK, Singapore and China to ensure we stay at the leading edge of the industry.

Avire – Enquiry 157

Novus called upon for care village expertise

AN OUTSTANDING REPUTATION FOR REFURBISHMENTS TO CARE HOMES HAS HELPED NOVUS PROPERTY SOLUTIONS WIN A CONTRACT TO UPGRADE THE BELONG VILLAGE IN CREWE.

Novus is carrying out the redecoration of communal areas and the majority of the village’s 66 bedrooms during a period of works that is being carefully coordinated in order to cause minimal disruption to the residents of the building.

The project is taking place over a number of months, and the group’s facilities manager has led the designs for the refurbishments, including wallpaper choices for feature walls.

Mark Johnson, operations manager at Novus Property Solutions, said: “The main issue with this contract is the need to be sensitive to the elderly residents, and we will be extremely careful about the placement of dust sheets and other trip hazards.

“Liaising with managers at the centre is vital, so that we can make sure that things can carry on as usual at the home. Each bedroom is completed in a day, moving all furniture into the middle of the room and covering, painting and

moving everything back so that residents aren’t out of their rooms for longer than a day.”

Sophia Talarek, facilities manager at CLS Care Services, said: “Works are progressing well on the site, and we are excited about the transformation taking place at our village.

“The team from Novus Property Solutions have been kind and courteous, and all staff

members have been kept abreast of what is happening with the works each day.

“Novus are doing a great job, and we’re looking forward to seeing the finished result.”

For more information about Novus Property Solutions please visit www.novussolutions.co.uk

Novus Property Solutions – Enquiry 158

TBA PROTECTIVE TECHNOLOGIES Enquiry 159

TBA Textiles, the globally renowned manufacturer of high performance and heat resistant textiles, has rebranded and unveiled its new look as TBA Protective Technologies The new name encapsulates this rich history and points forward to their pioneering research and development of textile technologies to revolutionise the industry. The rebrand also includes a new website, www.tba-pt.com, set to be launched in the upcoming months.

TBA Protective Technologies will continue to uphold its reputation as reliable and proactive industry leaders, who are always ready to share their knowledge and expertise.

CONSTRUCTION EVENT IS BACK! Enquiry 161

UK Construction Week is back following its successful launch in 2015. Bringing together nine shows under one roof to form the most comprehensive industry event in decades, UK Construction Week will return to the Birmingham NEC on 18 – 20 October 2016.

With some of the industry’s biggest names already signed up including JCB, Kingspan, Screwfix and CEMEX, as well as support from a growing number of leading trade associations, visitors will not want to miss UK Construction Week 2016. In 2015, UK Construction Week attracted more than 24,000 trade visitors and 650 exhibitors and this year’s show is set to be even bigger, building upon the solid platform of the inaugural event. Not only will the show provide visitors with the chance to benefit from exclusive deals from leading brands but it will also give them the opportunity to network with fellow professionals, learn more about the latest legislation and the future of the construction industry, see the latest innovations first hand and progress their careers through learning new skills.

Lee Newton, CEO of Media 10, commented: “As the largest event dedicated to knowledge sharing, championing good practice and problem solving, UK Construction Week is the environment for the whole industry to look, talk, plan, learn and do business.

Some of the key issues that will be discussed on the main stage at the event will be diversity in construction, tackling the skills and housing shortages, BIM and much more, while the individual show feature areas will offer a wealth of further, sector-specific information.

In addition to the comprehensive business offering, UK Construction Week will once again host a wide variety of evening entertainment including a casino night at the world-renowned Genting International Casino, the extremely popular UKCW beer festival and an exclusive launch of the Construction Enquirer Awards.

NEW SPECIFICATION MANAGER Enquiry 160

Mark Winstanley has been in the construction industry for over 35 years and brings a wealth of specification experience with him. His role will involve working with the rooflights team to identify and secure project specifications for low carbon GRP Daylight solutions, ensuring these specifications are for relevant projects and driven through to orders.

On joining Hambleside Danelaw , Mark commented: “I am very interested in being part of the design process listening to Architects and Consultants requirements to find if an appropriate solution can be provided. My years of experience have taught me that rather than waste anyone’s time to be honest and walk away if that solution does not sit in what I have to offer and point the Specifier in the right direction if I can. This technical approach and ethos of specification is reflected by Hambleside Danelaw and the exiting prospect of guiding Specifiers through the tricky waters of balancing daylight, insulation, fragility and sustainability in a low carbon GRP daylight solution.”

Hambleside Danelaw’s aim is to provide a balanced daylight solution to fulfil a clients’ practical, energy efficiency and sustainable aspirations.

For more information please call Mark on 07710 573008 or email him at Mark.Winstanley@hambleside-danelaw.co.uk

SWISH MARKS JOINT CENTENARY Enquiry 162

To mark the joint 100-year anniversaries of the first patent for PVC manufacture and the first flight of the World War I Sopwith Camel biplane, PVC Roofline and Rainwater specialists Swish Building Products had a large-scale static model built using their cellular PVC facia boards.

The Sopwith Camel first flew on December 22 1916 and went on to be the most successful allied fighter.

In recognition of the event, Swish built a 1/8th scale model, making the wings, fuselage and control surfaces from their off-the-shelf cellular PVC facia and soffit boards.

Also around 100 years ago, industrial chemist, Friedrich Heinrich August Klatte became the first inventor to receive a patent for PVC with a polymerization method for vinyl chloride using sunlight. Swish is also launching new ranges of their fascia and soffit boards in cream and white foil finishes. These will join Swish’s wider and fully integrated range of robust, cellular PVC profiles.

Like the existing products, they are weather resistant and virtually maintenance free.

RODGER ALLAN JOINS GEZE UK Enquiry 163

GEZE UK has reinforced its presence in Scotland with the appointment of Rodger Allan as area sales manager for automatic door systems.Rodger has 13 years’ industry experience encompassing all aspects of the sales process, from inspiration through to specification, design and purchase negotiation. Throughout his career he has specialised in developing markets for Scotland and Northern Ireland. Rodger will be responsible for building and developing relationships with clients and working with them to find the best solution for each project. He will work closely with fabrication companies as well architects, specifiers and contractors to recommend the right products from the company’s comprehensive range.

STO’S INCREASING SUCCESS Enquiry 164

The appointment of two highly experienced recruits to the Sto UK technical sales team has underlined the increasing popularity of the company’s range of products. Brendan Culleton and Melanie Hayman will expand Sto’s presence in the UK marketplace, and increase the level of support which the company supplies to architects, contractors, developers and applicators. Brendan will operate on a national basis developing Sto’s profile within the UK’s major construction groups. Melanie is appointed to the role of Technical Consultant and will work throughout the London and Home Counties region.