2013-2014 SEA&SEA CATALOG (updated 2014/04)

Page 1

PRODUCT CATALOG

2014


CONTENTS Strobes / Light YS-D1 YS-01

YS-02 YS-250PRO LX-24HID

Camera Housings 04 05 05 06 06

Please note that models with this symbol have been discontinued. Availability is limited.

MDX-RX100/Ⅱ

RDX-100D MDX-70D MDX-6D MDX-5D MarkⅢ MDX-D7100 MDX-D600 MDX-D800 RDX-650D MDX-X10

Samples of systems

Accessories 08 09 11 12 13 14 15 16 17 17 18-19

20-27

System Charts MDX Housings (for Canon)

28-29

MDX Housings (for Nikon)

30-31

RDX Housings (for Canon)

32

MDX-X10

33

MDX-RX100/Ⅱ

33

Product Specifications

34

* Image of illuminated LED is simulated.


The Optical YS Converter revolutionizes underwater photography. SEA&SEA have developed the world's first Optical YS Converter for SLR housings which converts the camera s hot-shoe TTL signal into an LED light TTL signal. Up to now, slave strobes have been triggered by the camera's built-in flash and because of this, flash interval time is totally dependent on how long it takes the camera s flash to recycle. Other drawbacks are that automatic exposure is not so accurate and light reflections inside the housing from the camera's built-in flash can adversely affect image quality.Though external YS converters provide quick strobe recycle time and accurate TTL automatic exposure, they are cumbersome in use and conventional sync cables can be susceptible to water damage.The new Optical YS Converter solves all these problems! By simply sliding onto the camera's hot-shoe, TTL and manual flash modes can be selected from the housing and as a conventional sync cable is not used, the risk of water damage is minimized. Because the strobe is not triggered by the camera's built-in flash, it fires and recycles quickly (in accordance with its specifications) ready to fire again when needed. Above all, the Optical YS Converter's TTL automatic exposure accuracy is phenomenal! The Optical YS Converter is tailored to each compatible camera's specific TTL exposure table and power is provided by two AAA batteries, economical and good for the environment.Future compatible housings will be designed and developed with precision of operation and ease of use foremost in mind to provide the best results possible.

Housings compatible with the Optical YS Converters(as of April 2014):MDX-70D, MDX-D7100, RDX-100D. * Optical YS Converter is an optional accessory. * Fiber-Optic Cable ll is required when using the Optical YS Converter.

RDX-100D U/W Housing for the Canon EOS Rebel SL1/100D

MDX-70D U/W Housing for the Canon EOS 70D

MDX-D7100 U/W Housing for Nikon D7100

Icon Key: Compatible with Compatible with Optical YS Converter Optical YS Converter.

DS-TTL Ⅱ automatic exposure is possible by connecting a DS- Effective Cordless TTL (TTL Slave) TTLⅡ digital camera in housing with the Fiber-optic Cable L-type. TTL function with Digital cameras. DS-

N It corresponds to the 5-pin

Compatible with Housing compatible with Internal YS Converter Internal YS Converter.

connectors of the Nikonos type.

With Target light illuminating Light the Strobe light axis. Target

5pin

By using Dual Sync Cord/N, it is possible to activate two-strobe lighting system.

the strobe manual flash exposure Manual With Test Confirming firing manually. control adjustment.

[Caution for Ni-MH battery] When Ni-MH batteries are used, please follow these instructions. Failure to do so could result in battery leakage or/and battery explosion *Insert the batteries with the polarity shown in the battery compartment . *Remove batteries immediately after use.

TTL photography is possible TTL with sync cord.

Sync Cord

Uses a fiber optic cable for

OPT connection between digital camera and strobe.

TTL Confirming the

Lamp

TTL flash output.

tone indicates flash Beep Audible readiness and TTL confirmation.

* For compatible cameras, please refer to“Compatibility List”for the strobe and digital cameras on the SEA&SEA website.


YS-D1

U/W Strobe

The YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1.

YS-D1(Black)03114 [Accessories] Fixing bolt, Diffuser100, Diffuser120, Ball Mount Strobe Adaptor O-ring Set 10580 *When the YS-D1 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable. * Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular). □Battery cap □LED target light

□Light level  control dial

Target Sync Cord DSTTL Number OPT TTLⅡ Light Manual TTL Lamp :32 Guide

5pin

□Target light switch □Mode switch

The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function.

A high-visibility three-colored LED indicator lamp is easy to read even during shooting.

□Fiber-optic cable socket (for additional strobe) □Ready lamp (red) /  TTL confirmation lamp (green) /  Slave TTL mode lamp (blue)

Powered by only four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32

A red LED will be shown when the strobe has been charged and is ready to fire.

A green LED will be shown for two seconds to confirm DS-TTL Ⅱ exposure.

Compared to the YS-110α, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the YS-D1 suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe s guide number can be reduced to 1. Highly versatile, the YS-D1 offers more automatic and manual control over lighting to get that perfect exposure.

Equipped with SEA&SEA’s new slave TTL system called “DS-TTL Ⅱ” Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system. The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today. The strobe is equipped with DS-TTL Ⅱ mode which is more responsive, more precise and more reliable. The DS-TTL Ⅱ enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras. When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography. YS-D1 PROMOTIONAL MOVIE

04

Beam angle

80° ×80°

By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value. Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable. The YS-D1 s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +-0EV, +0.3EV, +0.7EV, +1EV, +1.5EV).

□Reflector

□Fiber-optic cable socket (slave sensor)

N

A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire.

Two accessory diffusers

In macro photography when a wide beam is not necessary, no diffuser should be attached. For an even strong circular 100x100 light output is desired, mount the Diffuser 100. When a wide-angle lens is used, the diffuser 120 should be attached. Three beam angles can be selected in accordance with the photographer s requirements. Diffuser100 (Standard accessory)

28111

Strobe mount can be selected

/ Diffuser120 (Standard accessory)

With the conventional YS adaptor, the strobe can be moved only upward and downward. However, with the Ball Mount, the strobe can be moved in a variety of angles.

28112


U/W Strobe

Affordable compact DS-TTL and manual strobe with target light.

YS-01

YS-01 (Black)

DS-

O-ring Set

03112

OPT TTL

10580

□LED target light □Reflector

TTL

Lamp

Guide Number

:20

YS-02

YS-02 (Black)

Beam angle

100° ×100°

Compact but very versatile slave strobe, suitable for both macro and wide-angle photography.

Economic compact manual strobe.

03113

O-ring Set 10580

[Accessories] Fixing bolt, diffuser *When the YS-02 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable. *Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular).

Circular beam angle of 100 x 100 degrees.

Guide Number

:20

Beam angle

100° ×100°

Circular beam angle of 100 x 100 degrees. Maximum guide number is 20 (m). Equipped with a ten-level manual control function. Powered by 4x AA batteries, for the optimum number of flashes.

□Reflector

Maximum guide number is 20 (m).

OPT Manual OPT

fiber optic cable

S t r o b es / Lig h t

[Accessories] Fixing bolt, diffuser *When the YS-01 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable. *Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular).

Target

Light Manual

U/W Strobe

Quick recycle time of 1.9 sec. with nickel-metal hydride batteries (2700mAh).

Can be switched between DS-TTL and (ten-level) manual control modes, enabling fine adjustment of the light power output according to the photographer's requirements.

Diffuser for YS-01/02 (Standard accessory) 28109

Diffuser

Powered by 4x AA batteries, for the optimum number of flashes. □Fiber-optic cable socket (for additional strobe)

Equipped with a high-luminance white LED target light (1w) which also indicates the optical axis of the strobe.

□Fiber-optic cable socket (slave sensor) □Battery cap

Diffuser for YS-01/02 (Standard accessory) 28109

Diffuser

□Light level  control dial

□Light level  control dial □Mode switch

□Mode switch

YS-01 PROMOTIONAL MOVIE □Fiber-optic cable hook

□Ready (red) /  confirmation lamp

Product Specifications ↓ P. 34

□Ready (red) / TTL (green) confirmation lamp

Ac c es s or i es P.25(Sync Cords)

□Battery cap

□Fiber-optic cable socket (for additional strobe)

□Target light switch

□Fiber-optic cable socket (slave sensor)

Quick recycle time of 1.9 sec. (with 2700mAh nickel-metal hydride batteries).

□Fiber-optic cable hook

© Andy Sallmon

05


U/W Strobe

YS-250PRO

YS-250PRO (Black)

03526

O-ring Set

62127

[Accessories] Exclusive Ni-MH battery, exclusive battery charger (compatible with 110/240V), fixing bolt, diffuser, slave sensor cap *When the YS-250PRO is used with a camera with built-in flash in housing, use the Fiber-Optic Cable. *Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular). □Fiber-optic cable socket  (slave sensor) □LED target light

Our YS flagship model for professionals is fast and powerful with broad coverage: guide number 32, beam angle 105. N

Target

5pin

OPT Light

Equipped with a high-performance HID lamp that has a max. brightness of 1,750 lumens.

U/W Video Light

LX-24HID LX-24HID (Black)

09106

O-ring Set

62149

[Accessories] Storage bag, filters, multi-volt battery charger, adapter for camera arm, aluminum handle bar, hand strap, fixing bolt, hex wrench

TTL Test Manual TTL Lamp Sync Cord

Guide

Beep Number :32

Beam angle

□Hand grip

105° ×105°

A large circular arc tube produces a guide number of 32 (m/on land at full power). Equipped with 12-step manual flash power adjustment. Recycles in 1.8 seconds with dedicated high-capacity Ni-MH battery.

□TTL confirmation  lamp □N-connector

□Slave switch

□Reflector

LED power indicator on the main body shows how much battery power is remaining (green: FULL, amber, red: Low).

□Fiber-optic cable socket

□Target light switch

A ready lamp and a TTL confirmation lamp (with an audible signal) are situated on each side of the strobe.

□Over pressure  releif valve

□Charger  connector

54102

Battery Charger for YS-250PRO (Standard accessory) 57103

□Power switch

28105

Color Filter Set for LX-24HID 28110

□Mode switch

□Fiber-optic cable socket  (slave sensor)

□Light level  control dial

□Battery run-out  warning lamp /  Charging lamp

Battery for LX-24HID 57107

Battery charger for LX-24HID 57106

*Contact an official SEA&SEA dealer or Distributor when a bulb replacement is required.

06

Max. of 120 minutes of continuous lighting with a fully charged battery. With 3 light filters for different lighting purposes: "Diffusion," to widen the beam angle and to change from sport to flood; "Yellow," for better visibility when foggy; and "Amber," to bring the color temperature down to 5600K.

Battery for YS-250PRO (Standard accessory)

Diffuser for YS-250PRO (Standard accessory)

With use of a highly efficient, high-performance HID (metal halide) lamp, it can provide approx. three times (75W) as much light, even compared to halogen lamps with the same output. With a color temperature of 6500K, which approaches that for sunlight during midday, this lamp can be said to be the perfect light for underwater shooting. If using as a video light, mount the light to the Sea Arm using the accessory adapter for camera arm. If using as a dive light, attach the Hand Grip to the light.

A high-luminance white LED target light in the center shows precisely where the strobe is aimed.

□Ready lamp

Can be used for a variety of applications including as a video camera, digital camera, and diving light.

With a multi-volt type of charger that supports 100V to 240V. Can be used for charging overseas as is. Features an overpressure relief valve for safety. Equipped with an explosion-proof valve as a fail-safe measure to protect against rupture, etc. due to internal chemical reaction dynamics or differences in pressure between internal and external.   * Can be used out of water (for a max. of 60min.).


A huge school of yellowstripe scads appeared in front of me, changing its shape in a matter of seconds. It became a huge ball and then spread out like low lying clouds. The fishes' synchronized movements were unbelievably spectacular. I continued shooting for a while and then suddenly the shape changed again and the school stretched out in a line like the milky way. Without the YS-D1's wide beam-angle and high power output, the moment could not have been recorded. MDX-5D MarkⅢ YS-D1x2 with diffuser 100 EF17-40mm F4L USM 1/80sec F7.1 ISO400 Location: Ko Tao island, Thailand ⓒ Kyu Furumi

07


MDX-RX100/Ⅱ U/W Housing for SONY DSC-RX100/DSC-RX100Ⅱ

NEW

Housing for high-end digital compact camera SONY RX100 / RX100Ⅱ

MDX-RX100/Ⅱ Housing (Black) (Housing only)

06170 [Accessories] Port cap, Rubber spacers for RX100 and Hand strap Spare O-ring 62134 [Dimensions (WxHxD)] 147 x 97 x 117mm / 5.8 x 3.8 x 4.6 inches (including the port)  [Weight] Approx. 800g / 28.0oz (housing only) [Underwater weight] Approx.900g / 31.7oz (including the camera)  [Depth rating] 100m / 330ft [Construction] Corrosion-resistant aluminum alloy, galvanized (black) [Compatible strobes] YS-01、YS-02、YS-110α、and YS-D1

□Accessory shoe

□Fiber-optic  cable socket (x2)

□ON/OFF button

□MOVIE button

The large dial on the housing front connects to the camera’s control ring and smoothly operates Manual Focus and other functions (depending on mode selected). The multipurpose control wheel on the camera’s rear is operated by the multi-point controller on the back of the housing. All controls can easily be reached and operated by your right hand.

□MENU button

Equipped with two Fiber-optic cable sockets.

□Mode dial

□Zoom lever

□Fn button

□Shutter lever

□Control dial

□Mount for SA8  Fixed Ball Base

□Locking rotary latch

□Strap loop

□LCD monitor  window

□Control wheel □SET button □Delete button

□Tripod screw mount

The lens with an M67 screw mount The port is threaded so the M67 Wide-angle Conversion Lens 0.6x (#52123) can be mounted. * Angle of view increases from 28mm to approximately 17 mm when the M67 Wide-angle Conversion Lens 0.6x is mounted.

Image taken using standard lens

08

Taken with the M67 Wide-angle Conversion Lens

Optional Leak Sensor (#46115) can be built into the housing. Its LED lamp is located in the LCD monitor window and alerts you to any water ingress.

□Playback button

Equipped with two sacrificial zinc diodes (one of the front case and the secondon the rear) to avoid electrolysis damage. Sacrificial Zinc Anode (2 pieces) (#46116)

LCD Monitor Hood (#52121) with Lens can be fitted

SA8 Fixed Ball Base

The hood reduces reflections and provides a clear and complete view of the cameras LCD screen.

Using the SA8 Fixed Ball Base (#22119) allows various light mounting options without needing a tray or stay.

Anti-slip rubber piece located on the upper right-hand rear case, helps hold the housing steady.

Optional Leak Sensor

CD& DSLR

(#46115) The sensor immediately alerts you to any water leakage by super luminosity LED lighting up.


RDX-100D U/W housing for Canon EOS Rebel SL1/100D

RDX-100D Housing (Black) (Housing only) 06168 RDX-100D Housing and Standard Port Set

Compatible with the Optical YS Converter. Housing for the world's smallest and lightest DSLR camera, Canon EOS Rebel SL1/100D.

06646 [Accessories] Housing body cap, camera quick shoe, hand strap O-ring Set 62144 [Dimensions (WxHxD)]200x190x140mm / 7.9 x 7.5 x 5.5 inches[Weight]Approx. 1,770g / 62oz (Housing only)[Depth rating]60m / 200ft[Construction]Polycarbonate

□Accessory Shoe

□Power switch

□Fiber-optic  cable socket (x2)

□Hand strap eyelet

□Main Switch for  Optical YS Converter □Viewfinder

□Focus / Zoom dial

□Info button

□MENU button

□Hougin latch

□Mode dial □AF point selection /  magnify button

□Main dial □Shutter lever

□Live-view shooting/  movie shooting button

□AE lock / FE lock /  Index / reduce button □Exposure compensation/  aperture button □Cross keys □Setting button □Erase button

*Grips and port are sold separately.

□Play back button □Tripod socket

□Pressure balance  control valve

Compatible with the VF180 1.2x (#46112) viewfinders

Compatible with new Optical YS converter/C1 for RDX housing (#50137) which converts the camera s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.

The gear mechanism is now similar to MDX series housings. Perfect gear mesh enables accurate and quick zooming and focusing.

By attaching the VF180 prism viewfinder (magnification ratio of 1.2x) to a SEA&SEA housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

TTL mode shown by blue light . (simulated image)

Manual mode shown by green light. (simulated image)

Large buckle structure (with lock function). Makes it easier to open and close the back cover than existing (metal) locking latches. By attaching an SA8, a SEA ARM 7 Compact (#22124) or a similar arm set to the tripod socket at the bottom of the housing, up to two external strobes can be mounted. When using the optional Grip-Stay L Ⅱ (#22128), you can hold the camera firmly with both hands just as you can with conventional housings.

S y st e m Ch a r t s ↓ P. 3 2- 3 3

Focus/Zoom control has been fully redesigned.

Various ports including NX ports can be mounted with the RDX Port Base L (#30109) or the RDX Port Base S (#30108) in order to accommodate many kinds of lenses.

Ac c es s or i es ↓ P.2 0 -2 7

Optical YS Converter/C can be built into the housing

Features a Optical Viewfinder 0.5x that makes it easy to see the whole field of view. An optional exchangeable viewfinder can be selected as well.

Samples of systems ↓ P.18

□Port mount ring

Two Fiber-optic cable sockets. By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera s built-in flash enabling full-featured strobe photography and creative lighting expression.

・ R DX S er ies MDX S er ies

□ISO button

Compatible with Optical YS Converter

Enlarged image (VF180 1.2x)

09


I always used strobes in manual mode but recently I ve begun to use the TTL function more often. At first I doubted TTL would produce ideal exposures in underwater scenes but my doubts have proven unfounded. Making full use of the fisheye lens attributes, I focused on the lionfish with the school of glassfish in the background. Both the lionfish and glassfish could easily be overexposed but the image was properly balanced as intended. MDX-70D YS-D1x2 with diffuser 120 (DS-TTL mode, -0.3EV) EF 8-15mm F4L Fisheye USM 1/30sec F8 ISO200 Location: Izu Kawana, Japan ⓒ Kyu Furumi

10


MDX-70D U/W Housing for Canon EOS 70D

MDX-70D Housing (Black) (Housing only)

NEW

Compatible with Optical YS Converter, MDX housing for Canon EOS 70D.

06169

[Accessories] Housing body cap, camera quick shoe, light-shielding plate and two hex wrenches.  Spare O-ring 62148 [Dimensions (WxHxD)]337 x 191 x 140mm / 13.3 x 7.5 x 5.5 inches[Weight]Approx. 2,700g / 94.5oz.(Housing only)[Depth rating]100m / 330ft [Construction]Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Port for strobe /  YS converter connector □Lanyard Hook

□Hand Grip □Main Dial □Shutter lever

□Fiber-optic cable socket □Power Switch □Built-in flash  activation button

□Port Lock Lever

□Main Switch for Optical YS Converter □Viewfinder

□Built-in storobe deactivation lever

□Info Button

□AF Operation Selection Button □Drive Mode Selection Button

□Menu Button

□ISO Speed Setting /  AF Start Lever

□Accessory Port □Focus/Zoom Dial □Quick Control Button

□Lens Release  Button

□Metering Mode Selection Button □Live-view Shooting /  Movie Shooting Switch

□Mode Dial

□Locking Latch

□Playback Button □Delete button □Leak Sensor

□Metering Mode  Selection Lever □Start / Stop Lever □AF Point Selection /  Magnify Button □AE lock/FE Lock /  Index/Reduce Button

Port can be replaced without opening the housing. Controls all the Canon EOS 70D essential functions underwater. (Depth-of-field preview button and LCD panel illumination button are not operable from the housing). The camera's built-in flash can be activated and deactivated from the housing. (When the accessory light-shielding plate is fixed, this function cannot be used).

□Setting button

□Quick Control Dial

*Port and strobe connector (*1) sold separately.

Compatible with new Optical YS Converter/C1 for MDX housing (#50136) which converts the camera s hot-shoeTTL signal to a light signal. Both TTL and manual strobe modes can be used and controlled from the housing using a Fiber-Optic CableⅡ.

When using the VF180 (#46112) or VF45 viewfinders (#46111) the magnification increases by 1.2x and the entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

* Fiber-Optic Cable Ⅱ is required when using the Optical YS Converter.

The multi selector (which is often used underwater) is the same design as the camera control and can be operated in eight directions in the same way The multi selector is located on the very right hand side of the rear case so that it is easily accessible and operated with your hand on the grip.

Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage. Sacrificial Zinc Anode (2 pieces) (#46116) The shutter release lever tension can be adjusted in 2 steps with a spring. Built-in leak sensor immediately alerts you to water ingress. *1 The housing is not equipped with a strobe connector when shipped from the factory. Use (a) Fiber-optic Cable(s) when connecting external strobe(s). Optional Sync Cord 2-pin Connector (#50122) is required if you wish to use a conventional hardwired Sync cable.

Enlarged image ( VF180 1.2x)

S ys t em C ha r t s ↓ P. 2 8- 2 9

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

Ac ce ss or ies ↓ P. 20- 27

Optical YS Converter/C can be built into the housing

Equipped with Accessory Port which can be used for HDMI output.

Samples of systems ↓ P.18

□Multi-Controller

□Tripod socket

TTL mode shown by blue light . Manual mode shown by green light. (simulated image) (simulated image)

Equipped with two fiber-optic cable sockets. With the camera's built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as "slave units" by the built-in flash. MDX S er ies

□Accessory Shoe

Compatible with Optical YS Converter

Enlarged image ( VF45 1.2x)

11


MDX-6D U/W Housing for Canon EOS 6D

MDX-6D Housing (Black) (Housing only)

Compatible with the Internal YS Converter. MDX housing for FX format DSLR camera, Canon EOS 6D.

06166 [Accessories] Housing body cap, camera quick shoe, two hex wrenches. O-ring Set 62121 [Dimensions (WxHxD)] 337 x 175 x 140mm / 13.3 x 6.9 x 5.5 inches  [Weight] Approx. 2,700g / 94.5oz. (Housing only) [Depth rating] 100m / 330ft  [Construction] Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Viewfinder

□Accessory shoe

□Power switch

□Shutter lever

□Port for internal  YS Converter dial

□Lanyard hook

□Accessory port

□Hand grip

□YS Converter LED window

□Focus/  Zoom dial

□Mode dial

□Drive mode selection button □Live-view shooting /  Movie shooting switch □Metering mode  selection button □ISO / AE lock /  FE lock lever

□Info button □Menu button

□Start / Stop button □AF point selection  lever □AF start lever □Quick control button □Playback button

□Locking latch □Lens release  button

□Leak sensor

□Port lock lever

□Index / Magnify /  Reduce button □Quick control dial □Erase button

YS Converter/C can now be built into the MDX-6D housing. With the (optional) internal YS Converter/C, the ergonomics of the housing system will be greatly enhanced. TTL exposure-compensation and switching between TTL and Manual modes are controlled from the housing. Remaining battery power can also be checked from the housing.

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

* The internal YS Converter can be installed by your nearest official SEA&SEA service center.

Enlarged image(VF180 1.2x)

12

The housing comes with N type connector (2-pin wired). Equipped with Accessory Port which can be used for HDMI output. * When optional internal YS converter/C is installed, the accessory port is used for this purpose only. Shutter lever tension can be adjusted with a spring. Equipped with the Optical Viewfinder 0.5x as standard. Other (optional) interchangeable viewfinders can be used.

□Multi-controller

*Port is sold separately.

YS Converter/C can be built into the housing

Controls: Almost all the Canon EOS 6D essential underwater functions (except Depth-of-Field Preview button) can be used.

□AF operation selection button

□Strobe connector □Main dial

Compatible with Internal YS Converter

Enlarged image(VF45 1.2x)

Built-in leak sensor immediately alerts you to water ingress.

Port can be replaced without opening the housing Port lock can be now activated from outside the housing. The housing is also equipped with a ‘lens-lock release’ button which allows the lens to be replaced without opening the housing. The port lock can also be activated from inside like previous SEA&SEA housings.

Internal YS Converter/C for MDX-6D (#50125) Contact an official SEA&SEA service centre near you to install the internal YS Converter/C.

▶ Accessor y connector (supplied with the converter) is fixed in the accessory port. ▶ LED showing battery charge remaining is situated above the viewfinder on the rear of the housing. ▶3 mode strobe selection switches (for Left and Right) are located inside the housing. ▶Battery box (for CR2 lithium battery) is situated inside the housing. ▶ Battery box (for CR2 lithium battery) is situated inside the housing. Compatible strobes: YS-D1, YS-110α and YS-250 * When using external strobe(s) either the 5-pin Sync Cord/N(#17100) or the 5-pin Dual Sync Cord/N (#03470) is required.


MDX-5D Mark U/W Housing for Canon EOS 5D Mark Ⅲ

MDX-5D Mark Ⅲ Housing (Dark olive metallic) (Housing only)

Compatible with the Internal YS Converter. MDX housing for full-frame DSLR camera, Canon EOS 5D Mark Ⅲ.

06163 [Accessories] Housing body cap, camera quick shoe and two hex wrenches. O-ring Set [Dimensions (WxHxD)] 341x165x140mm / 13.6x6.6x5.6 inches [Weight] Approx. 2,500g / 88.2oz (Housing only)  [Depth rating] 100m / 330ft [Construction] Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Power switch

□Viewfinder

□AF mode selection / drive mode selection button

□Strobe connector □Main dial

□Mode dial

□Playback lever

□Shutter lever □Lanyard hook

□Accessory port □Port for built-in YS converter dial

□Focus /  Zoom dial

□Multi-function lever □Info button □Menu button □Creative photo/ comparative playback/ direct print button □Rating button □Index / magnify / reduce button □Delete button □Leak sensor

*Port is sold separately.

* You may encounter some difficulties to access the info button function if VF45 1.2x is installed on the housing. To avoid this problem, manufacturer suggests using VF180 1.2x instead.

Enlarged image(VF45 1.2x)

With both hands on the grips, further improved ergonomic design provides access to such controls as the main command dial and the sub-command dial the both of which are necessary for manual photography not to mention controls for video function.

□Start / stop button

The housing comes with N type connector (2-pin wired). Equipped with an accessory port for HDMI output.   Shutter lever tension can be adjusted with a spring.

□Quick control button □Setting button □Quick control dial □Multi-controller

Every button equipped with a luminous sticker

Comes with an optical viewfinder 0.5x as standard. Other interchangeable viewfinders are also available (optional). Built-in leak sensor immediately alerts you to water ingress.

Internal YS Converter/C for MDX-5D Mark Ⅲ (#50124)

Contact an official SEA&SEA service centre near you to install the internal YS Converter/C. ▶Power ON/OFF, switching between TTL and manual, TTL and TTL exposure compensation (from +2 to - 2 with in 1/3 increments) are controlled from the housing. ▶Accessory connector (supplied with the converter) is fixed in the accessory port. ▶LED showing battery charge remaining is situated alongside the viewfinder on the rear of the housing. ▶4 mode strobe selection switches (for Left and Right) are located inside the housing. ▶Battery box (for CR2 lithium battery) is situated inside the housing.

S y st e m Ch a r t s ↓ P. 28- 29

By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

The unique design makes the MDX-5D Mark Ⅲ one of the most ergonomically designed housing on the market today

□AF point selection  button □AF start lever

Almost all functions of the Canon EOS 5D Mark Ⅲ can be operated underwater (the sub-command dial).

Ac c es s or i es ↓ P.2 0 -2 7

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

□Live view shooting / movie shooting switch □ISO speed set /  flash exposure  compensation /  AE lock lever

Every detail of the housing is precision-machined from a solid aluminum-alloy block to achieve a high-quality texture and design, the colored anodization strengthens the housing.

Samples of systems ↓ P.19

□Locking latch

□Hand grip

Enlarged image(VF180 1.2x)

□Metering mode selection / white balance  selection button

Compatible with Internal YS Converter

MDX S er ies

□Accessory shoe

62121

Compatible strobes: YS-D1, YS-110α, YS-110, YS-250, YS-120 and YS-60/90. * When using external strobe(s) either the 5-pin Sync Cord/N(#17100) or the 5-pin Dual Sync Cord/N (#03470) is required.

13


MDX-D7100 U/W Housing for Nikon D7100

MDX-D7100 Housing (Black) (Housing only)

Compatible with new Optical YS Converter Housing for Nikon D7100; Nikon's topnotch DX-format SLR camera

06167 [Accessories] Housing body cap, camera quick shoe, light-shielding plate and two hex wrenches. O-ring Set [Dimensions (WxHxD)] 341x192x136mm / 13.4x7.6x5.4 inches  [Weight] 2,700g / 94.5oz. (Housing only) [Depth rating] 100m / 330ft  [Construction] Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Accessory shoe

□Fiber-optic cable socket

□Port for strobe /  YS converter connector

□Exposure mode dial

□Power switch

□Exposure mode  dial lock button

□Exposure compensation  button □Lanyard hook

□Release mode dial

□Viewfinder

62147

Compatible with Optical YS Converter

□Main switch for optical  YS Converter □Built-in flash disablement lever

□Delete button

□Playback lever

□Metering selector button /  formatting memory card button □Main command dial □AE / AF lock lever

□Accessory port □Flash mode /  flash compensation  button

□Shutter lever

□Focus/Zoom dial □Sub-command dial □AF mode button □Focus-mode  dial selector □Hand grip

□Lens release  button □Tripod socket

□Port lock lever

*Port and strobe connector (*1) sold separately.

□Help button /  protect button /  white balance button □Playback zoom in button /  image quality /  size button □Playback zoom out /  thumbnails button /  ISO sensitivity button □i button

□Movie-record  lever □Multi selector □Locking latch □OK button □Live view button □Info button □Live view  selector □Leak sensor

Optical YS Converter/N can be built into the housing

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

Port can be replaced without opening the housing

Compatible with new Optical YS Converter/N1 for MDX housing (#50126) which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable Ⅱ.

By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

Port lock can be now activated from outside the housing. The housing is also equipped with a ‘lens-lock release’ button which allows the lens to be replaced without opening the housing. The port lock can also be activated from inside like previous SEA&SEA housings.

* Fiber-Optic Cable Ⅱ is required when using the Optical YS Converter.

TTL mode shown by blue light. (simulated image)

14

□Menu button

Manual mode shown by green light. (simulated image)

Enlarged image VF180 1.2x

Enlarged image VF45 1.2x

Equipped with two fiber-optic cable sockets. With the camera's built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as ‘slave units’ by the built-in flash. Every detail of the housing is precision machined. The housing is protected by a highly corrosion resistant anodized coating. All edges have been polished carefully for perfection. Controls all the Nikon D7100 essential functions underwater.(Bracketing button, preview button and function button are not operable from the housing) . The multi selector (which is often used underwater) is the same design as the camera control and can be operated in the same way. AF areas and Focus points can be changed by depressing the selector. The multi selector control is located so that it is accessible with your hand on the grip. The camera's built-in flash can be activated and deac tivated from the housing. ( When the accessory light-shielding plate is fixed, this function cannot be used). Equipped with Accessory Port which can be used for HDMI output. Built-in leak sensor immediately alerts you to water ingress. *1 The housing is not equipped with any strobe connector when shipped from the factory. Use Fiber-Optic Cable(s) when connecting external strobe (s). Optional Sync Cord 2-pin Connector (#50122) is required if you wish to use a conventional sync cable.


MDX-D600 U/W Housing for Nikon D600/D610

Housing for Nikon D610 and D600 FX format digital SLR cameras.

MDX-D800 Housing (Dark blue) (Housing only)

06165 [Accessories] Housing body cap, camera quick shoe, light-shielding plate and two hex wrenches. O-ring Set [Dimensions (WxHxD)] 344 x 195 x 137mm / 13.8 x 7.8 x 5.5 inches  [Weight] Approx. 2,700g / 94.5oz. (Housing only) [Depth rating] 100m / 330ft  [Construction] Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Fiber-optic cable  socket

□Port for strobe connector

□Exposure mode dial

□Power switch

□Exposure mode  dial lock button □Release mode dial

□Shutter-release lever □Flash mode /  flash compensation  button □Focus /  zoom dial

□Sub-command dial

□Locking latch

□Metering selector button /  formatting memory card button □Exposure compensation button □Viewfinder

□Delete button □Menu button □Retouch button /  picture control button

□AF mode  button □Focus-mode  dial selector

□Playback zoom in  button / image quality /  size button

*Port and strobe connector (*1) sold separately.

□Main command dial □Live view button □Live view selector □Info button □OK button □Multi selector □Leak sensor

Two Fiber-optic cable sockets By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.

Equipped with an accessory port for HDMI output (*2) The housing buttons are angled for ease of use and enhanced functionality. Equipped with a tripod socket in the center of the bottom of the main body. Comes with an optical viewfinder 0.5x as standard. Other interchangeable viewfinders are also available (optional). A built-in leak sensor immediately alerts you to any water leakage. The quick shoe makes the camera easy to install and remove from the housing. Depth rating of 100m/330ft makes the housing ideal for tech diving. *1 The housing is not equipped with any strobe connector when shipped from the factory. Use Fiber-Optic Cable(s) when connecting external strobe (s). Optional Sync Cord 2-pin Connector (#50122) is required if you wish to use a conventional sync cable. *2 External monitor housing such as Wahoo Monitor HD for SONY CLM-V55 can be used. Contact an official SEA&SEA dealer near you.

Enlarged image (VF180 1.2x)

S y st e m Ch a r t s ↓ P.3 0 -3 1

By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

□Playback zoom out /  thumbnails button / ISO sensitivity button

□Movie-record lever

Almost all functions of the Nikon D610/D600 can be operated underwater (bracketing, pre-view and function buttons are not supported).

Ac c es s or i es ↓ P.2 0 -2 7

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

□AE / AF lock lever

□Playback lever

□Help button /  protect button /  white balance button

□Tripod socket

□Built-in flash  disablement lever

Samples of systems ↓ P.19

□Hand grip

□Accessory port

MDX S er ies

□Accessory shoe

62147

Enlarged image (VF45 1.2x)

13 15


MDX-D800 U/W Housing for Nikon D800/D800E

MDX housing for FX format cameras Nikon D800/D800E.

MDX-D800 Housing (Dark blue) (Housing only) 06162

[Accessories] Housing body cap, camera quick shoe, light-shielding plate and two hex wrenches. O-ring Set [Dimensions (WxHxD)] 349x210x141mm / 14.0x8.4x5.6 inches  [Weight] Approx. 2,800g / 98.7oz (Housing only) [Depth rating] 100m / 330ft  [Construction] Body: corrosion-resistant aluminum alloy (machined) / Grip: corrosion-resistant die-cast aluminum alloy

□Accessory shoe □Exposure mode button / formatting memory  cards button □Exposure  compensation button □Power switch □Shutter release lever

□Sub-command  dial

□Flash pop-up  button

□Image quality button □Fiber-optic cable  socket □Release mode dial lock release

□Flash mode  button □Focus /  Zoom dial □AF-mode button

□Hand grip

□Accessory port

□Focus-mode  selector

62146

□Port for strobe connector

□Metering selector □Lanyard hook

□Bracketing button □White balance button □Viewfinder □Release mode dial □Playback / ISO sensitivity lever □Delete button □Menu button □Protect / help button □Playback zoom-in button □Thumbnail / playback zoom-out button □OK button

□AF-ON button

□Main command dial

Almost all functions of the Nikon D800/D800E can be operated underwater (the Fn button located on the front of the camera is not supported).

□AE / AF lock button

Equipped with an accessory port for HDMI output (*2)

□Movie-record lever

□Locking latch □Live view button □Info button □Live view selector □Multi selector □Leak sensor

*Port and strobe connector (*1) sold separately.

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

The unique design makes the MDX-D800 one of the most ergonomically designed housing on the market today

Two Fiber-optic cable sockets

By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

With both hands on the grips, further improved ergonomic design provides access to such controls as the main command dial and the sub-command dial the both of which are necessary for manual photography not to mention controls for video function.

By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.

Enlarged image(VF180 1.2x) Enlarged image(VF45 1.2x)

16

Every button equipped with a luminous sticker

□Built-in flash  disablement lever

The housing buttons are angled for ease of use and enhanced functionality. Comes with an optical viewfinder 0.5x as standard. Other interchangeable viewfinders are also available (optional). Built-in leak sensor immediately alerts you to water ingress. *1 The housing is not equipped with any strobe connector when shipped from the factory. Use Fiber-Optic Cable(s) when connecting external strobe(s). Optional Sync Cord 2-pin Connector (#50122) is required if you wish to use a conventional sync cable. *2 External monitor housing such as Wahoo Monitor HD for SONY CLM-V55 can be used. Contact an official SEA&SEA dealer near you.


RDX-650D

U/W Housing for the Canon EOS 650D/700D/EOS Rebel T4i/T5i

High quality polycarbonate housing for the Canon EOS 650D/700D/EOS Rebel T4i/T5i

Ergonomically designed housing for the FUJIFILM X10 / X20 premium compact digital camera. MDX-X10 Housing(Black) (Housing only)06160

06645

[Accessories]Housing body cap, camera quick shoe, hand strap O-ring Set 62144 [Dimensions (WxHxD)]200 x 190 x 144mm / 8 x 7.6 x 5.8 inches[Weight]Approx. 1,780g / 62.3oz (Housing only) [Depth rating]60m / 200ft[Construction]Polycarbonate

[Accessories]Port cap, Power/zoom dial gear, Hand strap Spare O-ring 62154 [Dimensions (WxHxD)]165 x 105 x 125mm / 6.6 x 4.2 x 5.0 inches (including the port) [Weight]Approx. 1,100g / 38.8oz (housing only)[Underwater weight]Approx. 360g / 9.4oz (including the camera) [Depth rating]100m / 330ft[Construction]Corrosion-resistant aluminum alloy, galvanized (black)[Compatible strobe]YS-D1

・ R DX S er ies MDX S er ies

RDX-650D Housing (Black) (Housing only) 06164 RDX-650D Housing and Standard Port Set

MDX-X10 U/W Housing for FUJIFILM X10 / X20

*Grips and port are sold separately.

Two fiber-optic cable sockets Customer-replaceable strobe connector (Optional Sync Cord 2-pin Connector) (#50122) is available.Remove the accessory connecter cap and install the Optional Sync Cord / N. Then the 5-pin Sync Cord/N (#17100) or the 5-pin Dual Sync Cord/N (#03470) will be useable. Features a Optical Viewfinder 0.5x that makes it easy to see the whole field of view. An optional exchangeable viewfinder can be selected as well.

By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.

While mounted inside the housing, the camera flash can be activated or disabled with the flash control button and disablement lever.

S y st e m Ch a r t s ↓ P.3 0 -3 3

Camera Quick Shoe for easy mounting and removal of the camera. Mounting the camera becomes a breeze. You need only to slide the camera quick shoe into the slot, up to the designated position. There is almost no need for complicated position and gear alignments so even beginners can easily mount a camera.

The port end is threaded so that various options including the M67 Wide-angle Conversion Lens 0.6x (#52123) can be mounted.

Ac c es s or i es ↓ P.2 0 -2 7

Compatible with the VF180 1.2x (#46112) viewfinders By attaching the VF180 prism viewfinder (magnification ratio of 1.2x) to a SEA&SEA housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

With the Screw mount for SA8 M10 Fixed Ball Base(#22130), various lighting options are possible.

Anti-slip rubber areas are located in the upper right and left corners of the rear case. These areas hold the housing securely to ensure proper alignment.

13 17


S a mp l es o f s ys te m s MDX-RX100/ Ⅱ System Samples

MDX-70D System Samples

YS-02 x 1 system sample

YS-02 x 1 system sample

YS-01 x 2 system sample

□MDX-RX100/Ⅱ Housing □YS-02 □Fiber-optic Cable Ⅱ S/2 Connectors □SA8 (SA8 Fixed Ball Base / SA8 Strobe Head S /  SA8 Double Ball Arm S / SA8 Ball Clamp x2)

□RDX-100D Housing □RDX Standard Port □YS-02 □Fiber-Optic Cable Ⅱ M/2 Connectors □Grip-Stay L Ⅱ □Housing Lanyard Ⅲ □SA8 (SA8 Strobe Head M / SA8 Ball Clamp x 2 /  SA8 Ball Base For Accessory shoe) *When you shoot close-up photos, part of the image may not be illuminated due to the shadow of the port.

□MDX-70D □NX Compact Dome Port □YS-01 x 2 □Fiber-Optic Cable Ⅱ M/2 Connectors x 2 □Housing Lanyard Ⅲ □SA8 (SA8 Strobe Head M x 2 / SA8 Double Ball Arm S x 2 / □SA8 Ball Clamp x 4 / SA8 Fixed Ball Base x 2)

YS-D1 x 2 + Wide-Angle Conversion Lens system sample

YS-01 x 2 system sample

YS-D1 x 2 system sample

□RDX-100D Housing □RDX Port Base L □NX Compact Macro Port Base □Compact Macro Port S Ⅱ □YS-01 x 2 □Fiber-Optic Cable Ⅱ M/2 Connectors x 2 □Grip-Stay L Ⅱ □Housing Lanyard Ⅲ □SA8(Strobe Head S x 2 / SA8 Double Ball Arm M x 2 / SA8 Ball Clamp x 4)

□MDX-70D □NX Compact Dome Port □YS-D1 x 2 □Fiber-Optic Cable Ⅱ M/2 Connectors x 2 □Housing Lanyard Ⅲ □SA8 (SA8 Double Ball Arm L x 2 / SA8 Ball Clamp x 4 /  SA8 Fixed Ball Base x 2)

□MDX-RX100/Ⅱ Housing □M67 Wide-angle Conversion Lens 0.6x □Lens Caddy for M67 Wide-angle Conversion Lens □YS-D1 x 2 □Fiber-Optic Cable Ⅱ M/2 Connectors x 2 □SA8 (SA8 Double Ball Arm S x 2 / SA8 Ball Clamp x 4 /  SA8 Fixed Ball Base x 2 / SA8 Camera Tray + Grip /  Camera Tray Adapter / SA8 Extra Grip)

18

RDX-100D System Samples


MDX-D7100 System Samples

MDX-6D System Samples

MDX-5D Mark Ⅲ System Samples

YS-D1 x 1 system sample

YS-D1 x 2 system sample

□MDX-D7100 □DX Macro Port Base □DX Macro Port 50 Ⅱ □YS-D1 □Fiber-Optic Cable (L-type) □SA8 (SA8 Double Ball Arm S / SA8 Ball Clamp x 2 /  SA8 Fixed Ball Base)

□MDX-6DHousing □DX Macro Port Base □DX Macro Port 50 Ⅱ □YS-D1 □5-pin Sync Cord/N □SA8 (SA8 Double Ball Arm S / SA8 Ball Clamp x 2 /  SA8 Fixed Ball Base)

□MDX-5D Mark Ⅲ □NX Compact Dome Port □YS-D1 x 2 □5-pin Dual Sync Cord/N □SA8 (SA8 Ball Clamp x 2 / SA8 Fixed Ball Base x 2)

YS-D1 x 2 system sample

YS-D1 x 2 system sample

YS-250PRO x 2 system sample

□MDX-D7100 □NX Compact Dome Port □YS-D1 x 2 □Fiber-Optic Cable (L-type) x 2 □SA8 (SA8 Double Ball Arm S x 2 / SA8 Ball Clamp x 4 /  SA8 Fixed Ball Base x 2)

□MDX-6D Housing □Fisheye Dome Port 240 □YS-D1 x 2 □5-pin Dual Sync Cord/N x 2 □SA8 (SA8 Double Ball Arm M x 2 / SA8 Ball Clamp x 2 /  SA8 Fixed Ball Base x 2)

□MDX-5D Mark Ⅲ □Optical Dome Port □YS-250PRO x 2 □5-pin Dual Sync Cord/N x 2 □SA8 (SA8 Double Ball Arm M x 2 / SA8 Ball Clamp x 4 /  SA8 Fixed Ball Base x 2)

Samples of systems

YS-D1 x 1 system sample

19


Po r t s Dome Ports

Port Bases RDX Port Base S

DX Macro Port 52

Compact Macro Port 111

This high quality dome port is very versatile and suitable for various wide-angle full frame lenses.

[Dimensions (DIAxD)] 102x15mm / 4.1x0.6inches [Weight] Approx. 90g / 3.2oz [Depth rating] 100m / 330ft

Designed exclusively for Canon EF-S 60mm F2.8 Macro Lens. The front of the port is threaded so accessory lenses and filters with M67 mount can be used.

[Dimensions (DIAxD)] 102.5x127mm / 4.1x5.1inches [Weight] Approx. 342g / 12oz [Depth rating] 100m / 330ft

30116

[Dimensions (DIAxD)] 250x104mm / 10x4.2inches [Weight] Approx. 1,270g / 44.5oz [Depth rating] 80m / 262ft

30108

RDX Port Base L 30109

NX Compact Dome Port 56601

[Dimensions (DIAxD)] 174x79.5mm / 7x3.2inches [Weight] Approx. 410g / 14.4oz [Depth rating] 60m / 200ft

[Dimensions (DIAxD)] 132x55mm / 5.3x2.2inches [Weight] Approx. 300g / 10.5oz [Depth rating] 100m / 330ft

DX Macro Port Base 30105

CX Compact Dome Port 46100

[Dimensions (DIAxD)] 174x87mm / 7x3.5inches [Weight] Approx. 360g / 12.6oz [Depth rating] 60m / 200ft

[Dimensions (DIAxD)] 132x42.5mm / 5.3x1.7inches [Weight] Approx. 250g / 8.8oz [Depth rating] 100m / 330ft

30111

[Dimensions (DIAxD)] 132x62.5mm / 5.3x2.5inches [Weight] Approx. 360g / 12.7oz [Depth rating] 100m / 330ft

NX Compact Macro Port Base 56201

Wide Port Compact Wide Port L 30103

[Dimensions (DIAxD)] 154.5x57.8mm / 6.2x2.3inches [Weight] Approx. 680g / 23.8oz [Depth rating] 100m / 330ft

© Marc Montocchio

56261

Standard Ports RDX Standard Port 30107

DX Macro Port 50Ⅱ 30110

The port has a M67 screw mount on the front. [Required component] DX Macro Port Base [Dimensions (DIAxD)] 115x89mm / 4.6x3.6inches [Weight] Approx. 260g / 9.1oz [Depth rating] 100m / 330ft

[Dimensions (DIAxD)] 140x90mm / 5.6x3.6inches [Weight] Approx. 500g / 17.5oz [Depth rating] 100m / 330ft

Extension Rings SX Extension Ring 50261

Compact Macro Port SⅡ (35)

[Dimensions (DIAxD)] 132x66.5mm / 5.3x2.7inches [Weight] Approx. 290g / 10.2oz [Depth rating] 100m / 330ft

20

Macro Ports

Fisheye Dome Port 240

30112

The port has a M67 screw mount on the front. [Required component] NX Compact Macro Port Base [Dimensions (DIAxD)] 103x54mm / 4.1x2.2inches [Weight] Approx. 210g / 7.4oz [Depth rating] 100m / 330ft

Compact Macro Port 52 56241

[Dimensions (DIAxD)] 102.5x68mm / 4.1x2.7inches [Weight] Approx. 259g / 9.1oz [Depth rating] 100m / 330ft [Construction] Corrosion-resistant aluminum alloy (alumite coating) + Tempered glass

[Dimensions (DIAxD)] 135.5x35.5mm / 5.4x1.4inches [Weight] Approx. 277g / 9.7oz [Depth rating] 100m / 330ft

Extension Ring 40 56111

[Dimensions (DIAxD)] 135x56.5mm / 5.4x2.3inches [Weight] Approx. 345g / 12.1oz [Depth rating] 100m / 330ft


Acces s o r i e s ViewFinder VF180 1.2x

YS Converters

46112

DSLR

Straight prism viewfinder compatible with both the RDX and MDX series housings. Can be attached to the housing by replacing the original viewfinder. The magnification ratio is 1.2x without sacrificing the field of view. As the VF180 1.2x is straight finder, you can compose your images as if you are looking directly through the camera s viewfinder. Its 8 element 6 group optical lenses reproduce natural colors. The viewfinder is filled with nitrogen gas to prevent condensation and fogging. The eyepiece guard helps provide a clear view as it does not allow light to enter the viewfinder. [Construction] corrosion-resistant aluminum alloy [anodized body (Black)] [Depth rating] 100m / 330ft [Dimensions (DIAxD)] 45x111mm / 1.8x4.4inches [Weight] 275g / 9.6oz

VF45 1.2x

How to Mount the Product

46111

DSLR

A 45°prism viewfinder (magnification: 1.2x). The optional VF45 Prism viewfinder replaces your housing's original viewfinder and offers superior vision. Covering the entire field of view, the VF45 enhances magnification by 1.2x and enables subtle framing and focusing of subjects. The eyepiece rotates 360°in increments of 90°to provide the ideal camera position in either landscape or portrait.

Optical YS Converter/N1 for MDX housing

50126

Optical YS Converter/C1 for MDX housing

50136

Optical YS Converter/C1 for RDX housing

50137

A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*1). TTL and manual modes can be switched by pushing the mode switch on the housing (*2). *1 SEA&SEA's Fiber-Optic Cable II must be used with an Optical YS Converter.

[Controls] Power ON/Power OFF/TTL mode ※Optical YS Converter/N1 for MDX housing. (indicated by blue lamp)/Manual mode (indicated by green lamp) [Auto Power Off] The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour. [Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V) [Power Source] (*3) Alkaline: 15 hours / Mi-MH: 12 hours [Weight] 154g / 5.4oz. *3 Operating time depends on the battery brand, temperature and frequency of use.

Optional Sync Cord 2-pin Connector

*The viewfinder is not compatible with RDX series housings.

50122 DSLR

User replaceable 2-pin strobe connecter and sync connecter set. The connecter set can be fixed after removing cap for accessory port. *The image is simulated.

Comparison views through the various viewfinders

How to Mount the Product

*The connector set is required to connect the YS series strobes via sync cord to SEA&SEA housings for digital SLR cameras which are equipped with accessory port as standard.

Optional YS Converter / N 5-pin Connector

50123

User replaceable 5-pin strobe connector and sync connector set. The connector set can be fixed after removing cap for accessory port. [ [

[ [

[ [

[ [

0.5x

Optical Viewfinder

0.66x

Optical Viewfinder

0.8x

[ [

View through camera s original viewfinder VF180

VF45

1.2x 1.2x

*All images are simulated. *View through viewfinders may be subject to change with cameras use and/or the users position. *The LCD image pictured here is simulated.

A c c e sso r ie s

[Construction] corrosion-resistant aluminum alloy [anodized body (Black)] [Depth rating] 100m / 330ft [Dimensions (WxHxD)] 57.5x98.7x96mm / 2.3x3.9x3.8inches [Weight] 390g / 13.7oz

Optical Viewfinder

DSLR

DSLR

*The connector set is required to connect the YS Converter / N to SEA&SEA housings for Nikon digital SLR cameras which are equipped with accessory port as standard.

Optional YS Converter / C 6-pin Connector

50121

User replaceable 6-pin strobe connecter and sync connecter set. The connecter set can be fixed after removing cap for accessory port.

DSLR

*The connector set is required to connect the YS Converter/C to SEA&SEA housings for Canon digital SLR cameras which are equipped with accessory port as standard.

21


Acces s o r i e s Stays, Arms & Accessories [SA8]

CD& DSLR

Meticulously machined from a solid aluminum block, the Sea Arm 8 system is highly rigid, but at the same time, incredibly light. The unique structure of the Double Ball Arms was designed with the latest structural analysis software. The Double Ball Arms is available in three lengths, namely, short, medium, and long. The diameter of the ball is 24.8mm. The O-ring for the ball, which is made of synthetic rubber, has high wear resistance and durability. An ergonomically designed clamp enables the Double Ball Arms to be tightened and loosened with little effort. All Sea Arm 8 components are sold separately. O-ring Set for SA8 (4x O-Ring Pack) 62151

① SA8 Double Ball Arm S

⑦ SA8 Double Ball Strobe Head

22112

[Length]143mm / 5.7inches [Weight]60g / 2.1oz

[Length]121mm / 4.9inches [Weight]70g / 2.5oz

② SA8 Double Ball Arm M

22113

[Length]223mm / 8.9inches [Weight]80g / 2.8oz

⑧ SA8 Ball Clamp

③ SA8 Double Ball Arm L

22114

[Length]323mm / 12.9inches [Weight]110g / 3.9oz

[Dimensions (WxHxD)] 65x67.5x25mm / 2.6x2.7x1inches [Weight]67g / 2.3oz

⑨ SA8 Slide Ball Base ⑤

④ SA8 Strobe Head S

Used to mount a YS series strobe.

⑤SA8 Strobe Head M

[Dimensions (WxH)] 33x72mm / 1.3x2.9inches [Weight]83.5g / 2.9oz

22126

⑩ SA8 Fixed Ball Base

Longer than SA8 Strobe Head S. Used to mount a YS series strobe. [Length]121.3mm / 4.85inches [Weight]50.5g / 1.76oz

⑮※

⑥ SA8 Double Strobe Head

22117

Slides into the Bracket Shoe for mounting a Double Ball Arm with the Ball Clamp.

22115

[Length]68.5mm / 2.7inches [Weight]41g / 1.4oz

22116

Used to hold two ball joints together.

22127

A SA8 Strobe Head can be attached to this component.

22119

Attaches to the Extra Grip or the Camera Tray Adaptor and holds a Double Ball Arm in place with the Ball Clamp. [Dimensions (WxHxD)]40x47x15mm / 1.6x1.9x0.6inches [Weight]37g / 1.3oz

22129

Two strobes or lights or a combination can be mounted on the double head for various lighting options.

System sample

⑪ SA8 Ball Base For Accessory shoe

[Length]120mm / 4.8inches [Weight]70g / 2.5oz

22120

Attaches to the Accessory Shoe on a SEA&SEA housing. A YS series strobe can be attached with the Ball Clamp and the Strobe Head S / M. [Length]63mm / 2.5inches [Weight]70g / 2.5oz

System sample

22

CD

© Andy Sallmon

For Compact Digital Camera Housings

System sample

DSLR

For Digital SLR Camera Housings

System sample

CD& DSLR

For both Compact Digital Camera and Digital SLR Camera Housings

Others

Others


© Marc Montocchio

Samples of systems

⑫ SA8 Camera Tray Extension

22121

This component provides you with a comfortable grip when holding the housing with two strobes attached. [Dimensions (WxHxD)] 35x35x15mm / 1.4x1.4x0.6inches [Weight]38g / 1.3oz System sample

⑬ SA8 Extra Grip

22122

Ergonomically designed grip. The Bracket shoe or the Ball Base for Accessory can be mounted on the grip. Equipped with a lanyard hole. [Dimensions (WxHxD)] 52x120x15mm / 2.1x4.8x0.6inches [Weight]111g / 3.9oz

⑭ SA8 Camera Tray Adapter

22123

Adapter for connecting the Camera Tray and the Extra Grip. The position of the grip can be adjusted sideways. [Dimensions (WxHxD)] 100x5x35mm / 4x0.2x1.4inches [Weight]42g / 1.5oz 22118

*Set consists of ⑬, ⑭, and ⑮.

[Dimensions (WxHxD)] 217x130x77mm / 8.7x5.2x3.1inches [Weight]275g / 9.6oz

⑯ M10 Fixed Ball Base

22130

The SA8 M10 Fixed Ball Base can be mounted directly on housings that feature an M10 screw threaded mount. This includes the MDX-GRD IV / MDX-X10 housings (as of April 2014). [Length]62mm / 2.4inch [Weight]25g / 0.9oz

Stays & Accessories [Others] 22124

Sample combination for SLR housings with the Double Ball Arm S

SEA ARM 7 Compact

SA8 Double Ball Arm S, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Slide Ball Base

Arm set with universal camera base.

[Effective length]Approx. 310mm / 12.4inches [Weight]321g / 11.2oz ※Bracket Shoe is required to mount the arm set.

Sample combination for SLR housings with the Double Ball Arm M

CD

[Construction] Plastic reinforced with glass fiber [Components] Head SS, Double Ball M, Camera Base, Ball Base and two sets of Ball joints [Effective length] Approx. 450mm / 18inches [Weight] Approx. 575g / 20.1oz

SA8 Double Ball Arm M, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Slide Ball Base [Effective length]Approx. 390mm / 15.6inches [Weight]341g / 11.9oz ※Bracket Shoe is required to mount the arm set.

Sample combination for SLR housings with the Double Ball Arm L SA8 Double Ball Arm L, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Slide Ball Base [Effective length]Approx. 490mm / 19.6inches [Weight]371g / 13oz ※Bracket Shoe is required to mount the arm set.

Sample combination for compact digital cameras with the Double Ball Arm S SA8 Double Ball Arm S, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Fixed Ball Base, SA8 Camera Tray + Grip [Weight]Approx. 538g / 18.8oz

Sample combination for compact digital cameras with the Double Ball Arm M SA8 Double Ball Arm M, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Fixed Ball Base, SA8 Camera Tray + Grip

SEA ARM 7 Additional Arm

22125

Optional arm set for mounting the second strobe to the SEA ARM 7 Compact.

CD

[Construction] Plastic reinforced with glass fiber [Components] Head SS, Double Ball M, Ball Base and two sets of Ball joints [Effective length] Approx. 450mm / 18inches [Weight] Approx. 450g / 15.8oz

Grip-Stay L Ⅱ

22128

Grips and base stay with adjustable horizontal width and angle. The Sea Arm 8 or a Housing Lanyard Ⅲ can be attached to the grips.

DSLR

[Dimensions (WxHxD)] 376x154x71mm / 15x6.2x2.8inches [Weight]673g / 23.5oz [Construction]corrosion-resistant aluminum alloy (anodized body)

Hot Shoe Arm

29501

CD& DSLR

This shoe arm attaches to a housing port or an accessory shoe on the multi strobe ring. Accept small strobe.

Ac c es s or i es

⑮ SA8 Camera Tray + Grip

Grip with a universal camera housing tray that is compatible with most compact camera housings on the market.

● SA8

[Weight]Approx. 558g / 19.5oz

Mini Shoe Arm Sample combination for compact digital cameras with the Double Ball Arm L SA8 Double Ball Arm L, SA8 Strobe Head S, SA8 Ball Clamp x 2, SA8 Fixed Ball Base, SA8 Camera Tray + Grip [Weight]Approx. 588g / 20.6oz

29511

CD& DSLR

This mini shoe arm attaches to a housing port or an accessory shoe on the multi strobe ring. Accept small strobes.

Bracket Shoe

20100

CD& DSLR

Attaches the SA8 Slide Ball Base to the SA8 Camera Tray + Grip or the SA8 Extra Grip (screws included).

23


Pygmy Blenny couple exhibiting courtship behaviour. The male (left, displaying breeding colouration) was trying to attract the females attention and he successfully lured her into his hole. The act of courtship lasted just a matter of seconds. Because the YS-D1 recycles extremely quickly, I was able to shoot multiple images of this rare behaviour. Also, I feel that I was able to capture the passion of the moment with the YS-D1. MDX-70D YS-D1x2 with diffuser 100 EF100mm Macro USM 1/80sec F8 ISO200 Location: Kume island, Okinawa, Japan ⓒ Kyu Furumi

24


Acces s o r ie s Port Covers & Body Cap

Strobe Sync Cords Fiber-Optic CableⅡ

CD& DSLR

The best quality Fiber-Optic Cable is composed of 613 fibers (cores). Even when the cable is bent, attenuation of light is minimal. Therefore, the light signal will be transmitted to a strobe without loss. Compared with single fiber cables , the Fiber-Optic Cable II is more resistant to distortion, bending and physical impact.

5-pin Sync Cord/N 17100

DSLR

Fits securely over the port mount or face of the port and protect them from dust, debris or scratches. *The following covers and cap are not waterproof.

Front Port Cover <S> 51220

O-ring Set (6x O-Ring Pack) 62156 [Construction]Methacrylic Resin [Fiber Diameter]1.5mm / 0.059 inch [Cable Diameter]2.7mm / 0.105 inch

5-pin Dual Sync Cord/N 03470

50128

50109

51240

Stick the Velcro tape to the underwater housing covering the camera s built-in flash. Connect the Fiber-Optic Cable.

③Fiber-Optic Cable Ⅱ L/2 Connectors 50133

[Length]725mm / 28.5 inches

RDX Rear Port Cover 46113

Rear Port Cover <S> 51250

Housing Lanyard Ⅲ

Single-Core Fiber Cable Core has a wide diameter and when bent, the reflected angle of light is large so transmission loss is significant.

46114

Light

Muti-Core Fiber Cable Each core has a narrow diameter and when bent, the reflected angle of light is small so transmission loss is minimal. Small reflected angle

Large reflected angle

Large reflected angle

Light

Large reflected angle

Small reflected angle

Small reflected angle Small reflected angle

DSLR

New lanyard for carrying SLR housing. The clips have been designed to prevent accidental release. Rubber covers reduce noise for videography. Can be used with all MDX series housings and other SEA&SEA housings mounted on the Grip-Stay LⅡ.

Rear Port Cover <L> 51260

DSLR

For Digital SLR Camera Housings

CD& DSLR

For both Compact Digital Camera and Digital SLR Camera Housings

Others

Others

System sample

Others

Soft case for storing the Compact camera and housing set along with a strobe, an arm and other accessories. Includes protective polyethylene foam for shock absorption.

O-ring Remover

DSLR

- NX-series housings - DX-series housings - MDX-series housings

- Fisheye Dome Port 240 - NX Fisheye Dome Port

66103

Maintenance Goods

Housing Body Cap <L> 51280

Port Case

DSLR

- All NX-series ports (except Compact Macro Ports)

51211

For Compact Digital Camera Housings

DSLR

- Compact Macro Ports

NX Dome Port Cover

CD

Port Case DSLR

Ac c es s or i es

Differences between single-core fiber cable and multi-core fiber cable

Large reflected angle

DSLR

Convenient soft case for storing the camera s body and accessories.

- NX Zoom Port

- RDX-series housings

Housing Lanyard

Others

00230

Front Port Cover <L> CD

DSLR

Camera Pouch SEA&SEA Original Camera Pouch

[Length]453mm / 17.8 inches

Strobe Mask Set

Compact Dome Port Cover

DSLR

- NX Custom Flat Port - NX Standard Flat Port

②Fiber-Optic Cable Ⅱ M/2 Connectors

50135

DSLR

46020

DSLR

Front Port Cover <M>

①Fiber-Optic Cable Ⅱ S/2 Connectors

46101

- Compact Wide Port L - RDX Standard Port

- NX Compact Dome Port 51230

[Length]310mm / 12.2 inches

DSLR

- Compact Macro Ports

Wide Port Cover

DSLR

01920

Others

A tool to safely remove O-rings for cleaning and greasing without damaging the O-ring or O-ring channel.

Silicone Grease

01900

Others

SEA&SEA's own brand of lubricant to keep O-rings supple.

25


Conversion Lenses and Accessories M67 Wide-angle Conversion Lens 0.6x

52123

CD

A wide-angle conversion lens with M67 screw mount. When the lens is mounted, the angle of view increases from 28mm to about a maximum of 17mm (35mm film camera equivalent). The lens can be detached and attached underwater; it can also be used on land.

* For starred (*) housings, slightly zoom to telephoto side to avoid vignetting.

Without wide-angle conversion lens

52120

[Weight] 426g / 15oz (220g / 7.8oz underwater) [Dimensions (DIA x D)] 96 x 44mm / 3.8 x 1.7 inches [Construction] corrosion-resistant aluminum alloy, anodized body (black).

[Lens] 3 elements in 3 groups [Underwater angle of view] 85°(106.5° on land) [Magnification] 0.65x

[Depth rating] 60m / 200ft [Weight] Approx. 400g / 14oz (underwater: Approx. 230g / 8.1oz) [Dimensions (DIAxD)] 97x47mm / 3.9x1.9inches

*When used on land, slight vignetting (dimming) may occur in the four corners of the image. Slightly zoom in to telephoto to eliminate vignetting.

Lens Caddy for M67 Wide-angle Conversion Lens

60105

CD

The caddy is made of aluminum alloy and enables accessory lenses with M67 screw mounts to be attached to a SA8 Double Ball Arm (S/M/L) and stored when not in use. The caddy is securely bolted in place ensuring there is no movement or slip. Either the M67 Wide-angle Conversion Lens 0.6x(#52123) can be mounted. Two accessory lenses with M67 mounts can be attached to a SA8 Double Ball Arm if you have two Lens Caddies fitted (one on each side).

Optical Viewfinder 0.5x

With wide-angle conversion lens

46108

Reduces vignetting in the viewfinder s image. Recommended for wide-angle photography or other situations when it is essential to check the overall composition of the picture. Depending on the situation, the viewfinder can be replaced with a standard pick-up viewfinder.

46109

Standard viewfinder that provides good visibility for the entire field of view.

26

For Compact Digital Camera Housings

DSLR

SA8 Double Ball Arm M with one M67 Lens Caddy and M67 Wide-angle Conversion Lens mounted.

For Digital SLR Camera Housings

CD& DSLR

SA8 Double Ball Arm M with two M67 Lens Caddies, M67 Wide-angle Conversion Lens and Close-up Lens 125 (with M67-M62 Step Down Ring) mounted.

For both Compact Digital Camera and Digital SLR Camera Housings

DSLR

*The reflected image appears in the four corners of the viewfinder depending on the camera model.

Optical Viewfinder 0.66x

CD

With the PT-047

With wide-angle conversion lens Without wide-angle conversion lens

SA8 Double Ball Arm M with one M67 Lens Caddy attached.

CD

*The camera s angle of view increases from 28mm to 18mm (35mm film equivalent). (The lens can be used both on land and underwater. Can be attached and detached underwater). *The lens is compatible with Olympus PT-045 / PT-047 / PT-048 / PT-051 / PT-052 / PT-053 / PT-055 waterproof cases as of April 2014.

·The lens is compatible with the MDX-RX100/Ⅱ,MDX-X10* (for the FUJI Film X10/X20), the Nikon WP-N1+ / WP-N2*, the Olympus PT-EP06L, PT-EP05L as of April 2014. [Lens] 3 elements in 3 groups [Underwater angle of view] 94 degrees (150 degrees on land) [Magnification] 0.6x [Depth rating] 60m/200ft

M52 Wide-Angle Conversion Lens

Wide-Angle Conversion Lens for Olympus waterproof cases with M52 screw mount.

Others

Others

DSLR

*The reflected image appears in the four corners of the viewfinder.

Optical Viewfinder 0.8x

46104

We recommend this viewfinder for near-sighted users and for photographers who want to make sure the focus is clear in the center of the image during macro photography. You can interchange this viewfinder with the standard pickup viewfinder to best suit your needs. *The reflected image appears in the four corners of the viewfinder.

DSLR


Wide-Angle Conversion Lens for DX-1G

52116 CD

When the wide-angle conversion lens is mounted, the angle of view increases from 24mm to about 16mm (35mm film equivalent). (The lens can be used on land as well as underwater.) [Lens] 3 elements in 3 groups [Underwater angle of view] 85°(106.5°on land) [Magnification] 0.65x

Equivalent to an angle of view of 16mm: value on the land

With a standard lens at the wide-angle end

With the wide-angle conversion lens for DX-1G at the wide-angle end

M52-M62 Step Up Ring

58123 CD

CD& DSLR

The ring s diameter on the camera/housing side is 67mm and the diameter on the lens side is 62mm.

System sample

LCD Monitor Hood with Lens

58122

52121

The hood attaches to the LCD monitor area of a compact digital camera housing. The hood will reduce light and reflections and provide clear images from the LCD monitor from corner to corner. The lens has an anti-reflective coating to further reduce unnecessary reflections and glare. Ideal for those who would like to have enlarged and clearer views of the LCD monitor. [Compatible model] MDX-RX100/Ⅱ、MDX-GRD Ⅳ、DX-GE5

With the wide-angle conversion lens for DX-860G

Macro Diffuser for DX-1G

28107

CD

By using this product, perfectly lit macro images can be taken with the DX-2G and DX-1G camera s built-in flash.

Lens Caddy for DX-1G

Ac c es s or i es

The ring's diameter on the camera/housing side is 52mm and the diameter on the lens side is 62mm.

CD

[Lens] 3 elements in 3 groups [Depth rating] 45mm / 150ft [Underwater angle of view] 68° [Weight] Approx. 165g / 5.8oz [Magnification] 0.55x [Dimensions (DIAxD)] 64x42mm / 2.6x1.7inches

With a standard lens at the wide-angle end

M67-M62 Step Down Ring

52115

*The lens can be used on land, but slight vignetting (dimming) may occur in the four corners of the image. Slightly zoom in to telephoto to eliminate vignetting.

[Depth rating] 60m / 200ft [Weight] Approx. 406g / 14.2oz (underwater: Approx. 230g / 8.1oz) [Dimensions (DIAxD)] 97x48.5mm / 3.9x1.9 inches

Equivalent to an angle of view of 24mm: value on the land

Wide-Angle Conversion Lens for DX-860G

This wide-angle conversion lens covers a maximum field angle equivalent to approx. 28mm (35mm film camera equivalent) when used with the DX-GE5. (The lens can be used on land as well as underwater.)

60104

System sample

CD

Close-up Lens Ring for DX-GE5 CD

Close-UP Lens Ring

58119

A set-up ring to attach the Close-UP Lens 125 to the DX-2G / DX-1G housings.

CD

58124

CD

A set-up ring to attach the Close-UP Lens 125 to the DX-GE5 housing. Minimum shooting distance on the telephoto side (underwater) :15 cm.

System sample

27


System Ch a r t s System Chart for MDX Housings (for Canon)

MDX-70D, MDX-5D MarkⅢ, MDX-6D, MDX-7D, MDX-PRO 5D MarkⅡ, MDX-PRO MarkⅢ

31155

30105

30111

DX Macro Port 50Ⅱ 30110

DX Macro Port Base 30105

DX Macro Port 50Ⅱ 30110

Canon EF15mm F2.8 Fisheye

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

SX Extension Ring

NX Compact Dome Port

Fisheye Dome Port 240

50261

LENS

Canon EF28mm F2.8 IS USM

GEAR

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

31163

30116

SX Extension Ring

Extension Ring 40

Fisheye Dome Port 240

Fisheye Dome Port 240

50261

NX Compact Dome Port 56601

Fisheye Dome Port 240 30116

SIGMA 10mm F2.8 EX DC FISHEYE HSM

SIGMA 15mm F2.8 EX DG DIAGONAL FISHEYE

70D 7D Focus Gear

70D 5DⅢ 6D 7D 5DⅡ 3 Use auto focus

31152

30116

56111

30116

*1

SX Extension Ring 50261

PORT

Fisheye Dome Port 240 30116

NX Compact Dome Port 56601

Fisheye Dome Port 240 30116

NX Compact Dome Port 56601

Fisheye Dome Port 240 30116

★★ : Image aberration is rarely apparent ★ : Image aberration is sometimes apparent  ☆ : A close-up lens with M67 mount can be attached to the end of the port. *1:Manual focus cannot be used. *2:Auto focus cannot be used.  *3:It may be necessary to remove the dome shades at the widest picture angle so they do not appear in the images. *4:Either the zoom gear or the focus gear can be mounted on the lens. When the zoom gear is used, manual focus is not possible. When the focus gear is used, the zoom gear cannot be used.

28

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

50261

S U B P- O R T

WIDE

31164

Canon EF24mm F1.4L Ⅱ USM

46320

SX Extension Ring

56601

Canon EF24mm F2.8 IS USM

31164

Canon EF14mm F2.8L Ⅱ USM

31149

PORT

PORT

DX Macro Port 52

31132

S U B P- O R T

DX Macro Port Base

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

WIDE

S U B P- O R T

MACRO

31126

70D 5DⅢ 6D 7D 5DⅡ 3 Focus Gear

Canon EF100mm F2.8 Macro USM

GEAR

GEAR

70D 7D Focus Gear

Canon EF100mm F2.8L Macro IS USM

LENS

LENS

CanonEF-S EF-S Canon 60mmF2.8 F2.8 60mm MacroUSM USM Macro

NX Compact Dome Port 56601

Fisheye Dome Port 240

NX Compact Dome Port

30116

56601

Housings with the following marks are compatible

70D

MDX-70D

5DⅢ MDX-5D MarkⅢ 6D

MDX-6D

7D

MDX-7D

5DⅡ MDX-PRO 5D MarkⅡ

[Notice]Unnecessary reflection may be photographed under some conditions. [Notice]The system chart indicates the most recent information as of April 2014.     Please refer to the current system chart on our website at the following address:     http://www.seaandsea.jp/ .

3

MDX-PRO MarkⅢ


© Andy Sallmon

LENS

Canon EF 8-15mm F4L Fisheye USM

GEAR

5DⅢ 6D 5DⅡ 3 Zoom Gear

Canon EF 16-35mm F2.8L Ⅱ USM

Canon EF 16-35mm F2.8L USM 70D 5DⅢ 6D 7D 5DⅡ 3 Zoom Gear 31114

※1

5DⅢ 6D 5DⅡ 3 Focus Gear

70D 7D Zoom Gear

70D 7D Focus Gear

70D 7D Zoom Gear

70D 5DⅢ 6D 7D 5DⅡ 3 Zoom Gear

31161

31154

31161

31125

31114

31154 *4

S U B P- O R T

ZOOM

Canon EF-S 10-22mm F3.5-4.5 USM

*4

*4

*4

*1

*1

*1

PORT

Extension Ring 40

Extension Ring 40

Extension Ring 40

Extension Ring 40

NX Compact Dome Port

Fisheye Dome Port 240

Fisheye Dome Port 240

NX Compact Dome Port

56111

56111

56111

56111

*3

*3

NX Compact Dome Port 56601

NX Compact Dome Port

Fisheye Dome Port 240

Fisheye Dome Port 240

56601

30116

56601

30116

30116

30116

56601

LENS

Canon EF-S 18-55mm F3.5-5.6 IS

SIGMA 10-20mm F4-5.6 EX DC /HSM

SIGMA 18-50mm F2.8 EX DC MACRO /HSM

SIGMA 17-70mm F2.8-4 DC MACRO OS HSM

Tokina AT-X 107 DX Fisheye 10-17mm F3.5-4.5(IF)

GEAR

70D 5DⅢ 6D 7D 5DⅡ 3 Zoom Gear

70D 7D Zoom Gear

70D 7D Zoom Gear

70D 7D Zoom Gear

70D 7D Zoom Gear

70D 7D Zoom Gear

31109

31119

31142

31151

31169

S U B P- O R T

ZOOM

Canon EF 17-40mm F4L USM

*1

*1

*1

50261

NX Compact Macro Port Base 56201

56201

SX Extension Ring 50261

30116

31114

*Use zoom gear for EF16-35mm *1

*1

SX Extension Ring

NX Compact Macro Port Base

Fisheye Dome Port 240

SX Extension Ring

SX Extension Ring

Fisheye Dome Port 240

NX Compact Dome Port

Fisheye Dome Port 240

50261

50261

50261

Extension Ring 40

S y st e m Ch a r t s

PORT

SX Extension Ring

56111

Fisheye Dome Port 240 30116

Compact Wide Port L 30103

Fisheye Dome Port 240 30116

NX Compact Dome Port 56601

Compact Wide Port L 30103

★★ : Image aberration is rarely apparent ★ : Image aberration is sometimes apparent  ☆ : A close-up lens with M67 mount can be attached to the end of the port. *1:Manual focus cannot be used. *2:Auto focus cannot be used.  *3:It may be necessary to remove the dome shades at the widest picture angle so they do not appear in the images. *4:Either the zoom gear or the focus gear can be mounted on the lens. When the zoom gear is used, manual focus is not possible. When the focus gear is used, the zoom gear cannot be used. ※1:Setting of the aperture value more than F8 is recommended.

NX Compact Dome Port 56601

30116

56601

Housings with the following marks are compatible

70D

MDX-70D

5DⅢ MDX-5D MarkⅢ 6D

MDX-6D

7D

30116

MDX-7D

5DⅡ MDX-PRO 5D MarkⅡ

3

MDX-PRO MarkⅢ

[Notice]Unnecessary reflection may be photographed under some conditions. [Notice]The system chart indicates the most recent information as of April 2014.     Please refer to the current system chart on our website at the following address:     http://www.seaandsea.jp/ .

29


■How to use system chart (example) As an example, selecting ports for the Canon EF-S 10-22mm F3.5-4.5USM lens using the SEA&SEA system chart. In this example, the following zoom gear must be used. When the zoom gear is mounted on the lens, only auto focus (photography) is possible. In the case of this lens, three port choices are available. 1) Combination of NX Compact Dome Port and RDX Port Base L, 2) Combination of Optical Dome Port and RDX Port Base L. Select one port choice in accordance with your shooting style or other lens combinations.

System Chart for MDX Housings (for Nikon)

MDX-D7100, MDX-D800, MDX-D600, MDX-D7000, MDX-D300s, MDX-D300, MDX-PRO D700 LENS

Nikon AF-S Micro NIKKOR 60mm F2.8G ED

Nikon AF-S DX Micro-Nikkor 85mm F3.5G ED VR

Nikon AF-S VR Micro-Nikkor ED 105mm F2.8G(IF)

GEAR

D7100 D800 D600 D7000 300s 300 700 Focus Gear

D7100 D800 D600 D7000 300s 300 700 Focus Gear

D7100 D800 D600 D7000 300s 300 700 Focus Gear

PORT

30105

DX Macro Port 50Ⅱ 30110

56201

Compact Macro Port SⅡ 30112

LENS

Nikon AF DX Fisheye-Nikkor ED 10.5mm F2.8G

Nikon Ai AF Nikkor ED 14mm F2.8D

Nikon Ai AF Fisheye-Nikkor 16mm F2.8D

GEAR

D7100 D800 D600 D7000 300s 300 700 Focus Gear

D7100 D800 D600 D7000 300s 300 700 Focus Gear

D7100 D7000 300s 300 Focus Gear

S U B P- O R T

WIDE

31120

31108

56410

NX Compact Macro Port Base

DX Macro Port Base 30105

56201

Compact Wide Port L 30103

DX Macro Port 50Ⅱ 30110

D800 D600 700 Focus Gear

56410

SIGMA 10mm F2.8 EX DC FISHEYE HSM

SIGMA 15mm F2.8 EX DG DIAGONAL FISHEYE

D7100 D800 D600 D7000 300s 300 700 Focus Gear

D7100 D800 D600 D7000 300s 300 700 Focus Gear

31138

Zoom Gear

Housing out of the box

100 650 600 550 500 450

31125

Zoom gear is mounted on the lens

*1 *4

Mount RDX Port Base L (ring-shaped) on the housing (bayonet mount).

RDX Port Base L 30109

Mount NX Compact Dome Port (ring-shaped) on the housing (bayonet mount).

NX Compact Dome Port 56601

31114 *Use zoom gear for EF16-35mm

Extension Ring 40 SX Extension Ring 56111

PORT

Fisheye Dome Port 240 30116

50261

NX Compact Fisheye Dome Fisheye Dome Dome Port Port 240 Port 240 56601

30116

30116

NX Compact Fisheye Dome Dome Port Port 240 56601

30116

NX Compact Dome Port

★★ : Image aberration is rarely apparent ★ : Image aberration is sometimes apparent  ☆ : A close-up lens with M67 mount can be attached to the end of the port. *1:Manual focus cannot be used. *2:Auto focus cannot be used.  *3:It may be necessary to remove the dome shades at the widest picture angle so they do not appear in the images.

30

Canon EF-S 10-22mm F3.5-4.5 USM

S U B P- O R T P O R T

30112

NX Compact Macro Port Base

DX Macro Port Base

56201

Compact Macro Port SⅡ

31133

GEAR

NX Compact Macro Port Base

31153

LENS

S U B P- O R T

MACRO

31135

56601

NX Compact Dome Port

56601

Fisheye Dome Port 240 30116

Housings with the following marks are compatible

D7100

MDX-D7100

D800

MDX-D800

D600

MDX-D600

D7000

MDX-D7000

300s

MDX-D300s

300

MDX-D300

[Notice]Unnecessary reflection may be photographed under some conditions. [Notice]The system chart indicates the most recent information as of April 2014.     Please refer to the current system chart on our website at the following address:     http://www.seaandsea.jp/ .

700

MDX-PRO D700


© Andy Sallmon

System Chart for MDX Housings (for Nikon)

MDX-D7100, MDX-D800, MDX-D600, MDX-D7000, MDX-D300s, MDX-D300, MDX-PRO D700 LENS GEAR

Nikon AF-S DX NIKKOR 10-24mm F3.5-4.5G ED

AF-S DX Zoom Nikkor ED 12-24mm F4G(IF)

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

※1

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

31157 *1

31107

*1

S U B P- O R T

ZOOM

31121

Nikon AF-S 16-35mm F4G ED VR

*1

SX Extension Ring

Extension Ring 40

Extension Ring 40

Fisheye Dome Port 240

Fisheye Dome Port 240

50261

56111

SX Extension Ring 50261

PORT

Extension Ring 40

NX Compact Dome Port

Fisheye Dome Port 240

56601

30116

NX Compact Macro Port Base

SX Extension Ring 50261

Fisheye Dome Port 240 30116

56201

Fisheye Dome Port 240 30116

Compact Wide Port L 30103

NX Compact Macro Port Base

SX Extension Ring 50261

56201

56111

56111

NX Compact Dome Port

CX Compact Dome Port

46100

56601

30116

30116

LENS

Nikon AF-S NIKKOR 18-35mm f/3.5-4.5G ED

SIGMA 10-20mm F4-5.6 EX DC /HSM

SIGMA 17-70mm F2.8-4 DC MACRO OS HSM

Tokina AT-X 107 DX Fisheye 10-17mm F3.5-4.5

GEAR

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

D7100 D800 D600 D7000 300s 300 700 Zoom Gear

S U B P- O R T

ZOOM

31142

31160

31114 *Use zoom gear for EF16-35mm

31169

*1

*1

*1

SX Extension Ring NX Compact Macro Port Base 56201

30103

56111

Extension Ring 40 56111

SX Extension Ring 50261

50261

SX Extension Ring 50261

SX Extension Ring

SX Extension Ring

SX Extension Ring

Fisheye Dome Port 240

NX Compact Dome Port

Fisheye Dome Port 240

50261

Extension Ring 40

50261

50261

56111

NX Compact Dome Port 56601

Fisheye Dome Port 240 30116

Fisheye Dome Port 240 30116

NX Compact Dome Port 56601

★★ : Image aberration is rarely apparent ★ : Image aberration is sometimes apparent  ☆ : A close-up lens with M67 mount can be attached to the end of the port. *1:Manual focus cannot be used. *2:Auto focus cannot be used.  *3:It may be necessary to remove the dome shades at the widest picture angle so they do not appear in the images. ※1:Setting of the aperture value more than F8 is recommended.

NX Compact Dome Port 56601

30116

D7100

MDX-D7100

D800

MDX-D800

30116

56601

Housings with the following marks are compatible

D600

MDX-D600

D7000

S y st e m Ch a r t s

PORT

Compact Wide Port L

Extension Ring 40

MDX-D7000

300s

MDX-D300s

300

MDX-D300

700

MDX-PRO D700

[Notice]Unnecessary reflection may be photographed under some conditions. [Notice]The system chart indicates the most recent information as of April 2014.     Please refer to the current system chart on our website at the following address:     http://www.seaandsea.jp/ .

31


System Chart for RDX Housings (for Canon)

RDX-100D, RDX-650D, RDX-600D, RDX-550D, RDX-500D, RDX-450D LENS

LENS

Canon EF-S 60mm F2.8 Macro USM

Canon EF100mm F2.8L Macro IS USM 100 650 600 550 500 450

Focus Gear

31155 *4

*1

30108

RDX Port Base L 30109

S U B P- O R T

RDX Port Base S

WIDE

S U B P- O R T

MACRO

30108

Focus Gear

Use auto focus

31126 *4

RDX Port Base S

100 650 600 550 500 450

GEAR

GEAR

100 650 600 550 500 450

Canon EF15mm F2.8 Fisheye

Canon EF24mm F1.4L Ⅱ USM

100 650 600 550 500 450

650 600 550 500 450

Canon EF24mm F2.8 IS USM

100

Focus Gear

Use auto focus

31163

*1

100

650 600 550 500 450

Use auto focus

31164

100

650 600 550 500 450

Use auto focus

Focus Gear

*1

SIGMA 10mm F2.8 EX DC FISHEYE HSM

Canon EF28mm F2.8 IS USM

Focus Gear 31164

*1

650 600 550 500 450

Use auto focus

Focus Gear

RDX Port Base S RDX Port Base L 30108

31152

*1

RDX Port Base S

30109

30108

NX Compact Macro Port Base 56201

56241

Compact Macro Port 111 56261

Compact Macro Port SⅡ 30112

LENS

Canon EF 8-15mm F4L Fisheye USM

GEAR S U B P- O R T

ZOOM

Zoom Gear 31125

*1

*1 *4

PORT

RDX Port Base L

RDX Port Base L

CX Compact Dome Port

NX Compact Dome Port

NX Compact Dome Port

46100

30109

56601

Zoom Gear

30107

Zoom Gear

*1

RDX Standard Port

30107

RDX Standard Port

30107

31114 *Use zoom gear for EF16-35mm

*1

31142 *4

30107

RDX Standard Port

RDX Standard Port

30107

30107

Housings with the following marks are compatible

100

RDX-100D

650

RDX-650D

600

RDX-600D

550

CX Compact Dome Port 46100

*1 *4

RDX Port Base L

RDX Port Base S

RDX Port Base L

NX Compact Dome Port

CX Compact Dome Port

NX Compact Dome Port

30108

30109

RDX Standard Port

30107

Zoom Gear

Zoom Gear

*1

RDX Standard Port

30107

100 650 600 550 500 450

100 650 600 550 500 450

31119 *4

RDX Standard Port

Tokina AT-X 107 DX Fisheye 10-17mm F3.5-4.5 (IF)

30109

56601

RDX Standard Port

30107

SIGMA 10-20mm F4-5.6 EX DC /HSM

100 650 600 550 500 450

31158 *4

★★ : Image aberration is rarely apparent ★ : Image aberration is sometimes apparent  ☆ : A close-up lens with M67 mount can be attached to the end of the port. *1:Manual focus cannot be used. *2:Auto focus cannot be used. *3:It may be necessary to remove the dome shades at the widest picture angle so they do not appear in the images. *4:The location of the gear on the lens is different from that described on the instruction sheet. Please see addendum sheet included with the housing.

32

RDX Standard Port

Canon EF-S 18-55mm F3.5-5.6 IS

100 650 600 550 500 450

RDX Port Base S 30108

56601

Canon EF-S 18-55mm F3.5-5.6 IS STM

100 650 600 550 500 450

Zoom Gear

NX Compact Dome Port

CX Compact Dome Port 46100

Canon EF-S 10-22mm F3.5-4.5 USM

650 600 550 500 450

31154

PORT

PORT

Compact Macro Port 52

RDX-550D

46100

56601

500

RDX-500D

[Notice]Unnecessary reflection may be photographed under some conditions. [Notice]This is a concise system chart. The full system chart can be found at:     http://www.seaandsea.jp/.

450

30109

56601

RDX-450D

RDX for Nikon system chart is available at: http://www.seaandsea.jp/.

100

Use auto focus *1


System Chart for MDX-RX100/Ⅱ SA8 Ball Base For Accessory shoe 22120 M67 Wide-Angle Conversion Lens

LCD Monitor Hood with Lens 52121

52123

SA8 Camera Tray+ Grip MDX-RX100/Ⅱ

SA8 M10 Fixed Ball Base 22130 SA8 Fixed Ball Base 22119

22118

SA8 Ball Clamp 22116

SA8 Double Ball Arm S 22112

SA8 Ball Clamp 22116

06170

SA8 Strobe Head S 22115

03114

SA8 Double Ball Arm M

Optional Leak Sensor

Bracket Shoe

46115

20100

22113

SA8 Slide Ball Base 22117

SA8 Strobe Head M

SA8 Double Ball Arm L

22122

Fiber-Optic Cable Ⅱ M/2 Connectors 50128 SA8 Double Ball Strobe Head

SA8 SA8 Camera Tray Camera Tray Adapter Extension 22123

Fiber-Optic Cable Ⅱ S/2 Connectors 50135

22126

22114

SA8 Extra Grip

YS-D1

22129

Fiber-Optic Cable Ⅱ L/2 Connectors 50133

22121

SA8 Double Ball Strobe Head 22127

System Chart for MDX-X10 SA8 Ball Base For Accessory shoe 22120 M67 Wide-Angle Conversion Lens

SA8 M10 Fixed Ball Base 22130

52123

SA8 Camera Tray+ Grip MDX-X10

SA8 Fixed Ball Base 22119

22118

SA8 Ball Clamp 22116

SA8 Double Ball Arm S 22112

SA8 Ball Clamp 22116

06160

SA8 Strobe Head S 22115

20100

SA8 Slide Ball Base 22117

22113

SA8 Double Ball Arm L

SA8 Strobe Head M 22126

22114

SA8 Extra Grip 22122

SA8 SA8 Camera Tray Camera Tray Adapter Extension 22123

Fiber-Optic Cable Ⅱ S/2 Connectors 50135

Fiber-Optic Cable Ⅱ M/2 Connectors 50128 SA8 Double Ball Strobe Head 22129

S y st e m Ch a r t s

Bracket Shoe

YS-D1 03114

SA8 Double Ball Arm M

Fiber-Optic Cable Ⅱ L/2 Connectors 50133

22121

SA8 Double Ball Strobe Head 22127 * The system chart indicates the most recent information as of April 2014.

33


A: Alkaline, Ni-MH: Nickel-Metal-Hydride

Item

YS-D1

YS-01

Guide Number (ISO 100/m) (land) 32, 24 (with Diffuser 100 attached),

YS-02

Item

YS-250PRO

LX-24HID

20

20

32

Bulb type

24W HID

100° x100° (with diffuser 110° x110° )

100° x100° (with diffuser 110° x110° )

105° ×105° (with diffuser 115° x 115° )

Light output 1750 lumens

20 (with Diffuser 120 attached) Beam Angle

80° x80° (without diffuser), 100° x100° (diffuser 100),

Beam angle 36°(90° with diffusing filter)

120°x 120° (diffuser 120) Batteries

■ 4xAA ● A: 6V ● Ni-MH: 4.8V

■ 4xAA ● A: 6V ● Ni-MH: 4.8V

■ 4xAA ● A: 6V ● Ni-MH: 4.8V

Battery for YS-250PRO

Run time

Approx. 120min.

Number of Flashes*1

● A: 150 ● Ni-MH: 200

● A: 230 ● Ni-MH: 330

● A: 230 ● Ni-MH: 330

200

Battery

Rechargeable lithium-ion battery

Recycle time (full)*2

● A: 2.8 sec. ● Ni-MH: 1.9 sec.

● A: 2.5 sec. ● Ni-MH: 1.9 sec.

● A: 2.5 sec. ● Ni-MH: 1.9 sec.

1.8 sec.

Color temperature 6,500K (at max. light intensity)

Color temperature

5600K

5600K

5600K

5,600K

Charging time Approx. 6 hours using the exclusive charger

Color temperature w/diffuser 5250K

5250K

5250K

5,200K

Battery charger Input voltage AC 100V - 240V

75m / 250ft

75m / 250ft

60m / 200ft

Depth rating 120m / 400ft

68x108x129mm / 2.7x4.3x5.2inches

107x130x223mm / 4.3x5.2x9inches

Dimensions 75x250mm / 3.0x10inches

445g / 15.6oz (w/o batteries)

1,383g / 48.4oz (w/o batteries)

100m / 330ft

Depth rating

(Excluding protruding part(s) and the arm holder.) : 68x108x129mm / 2.7x4.3x5.2inches

Dimensions (WxHxD)

87x135x111mm / 3.5 x 5.4 x 4.4 inches

Weight

650g / 22.9oz (w/o batteries) * Attached a YS Mount Strobe Adaptor and a fixing bolt to the Strobe.

Underwater weight

0.5g / 0.02oz(w/ batteries)

Others

□Exposure control: DS-TTL II, Slave TTL,  Light level control dial (GN): 1/1.4 /2/2.8/4/5.6/8/  11/16/22/32 (11 steps) □Pre-flash control:  Equipped with pre-flash cancel mode □DS-TTL II function □Slave function □Auto power OFF function □Sync cord : 5-pin Sync cord/N,  Fiber-Optic Cable □Over-pressure relief valve □LED target light

(not including projections)

(DIA×D) 450g / 15.8oz (w/o batteries)

(underwater: Approx. 700g / 24.5oz)

* Attached a fixing bolt to the Strobe.

* Attached a fixing bolt to the Strobe.

-10g / -0.4oz(w/ batteries)

-10g / -0.4oz(w/ batteries)

80g / 2.8oz(w/ batteries)

□Exposure control:  Light level control dial (GN): 1/1.4/2/2.8/4/5.6/8/11/  16/20 (10 steps) □Pre-flash control:  Equipped with pre-flash cancel mode □Slave function □Auto power OFF function □Sync cord : Fiber-optic cable □Over-pressure relief valve

□Exposure control: TTL,  Light level control dial (GN):  0.7/1/1.4/2/2.8/4/5.6/8/11/  16/22/32 (12 steps) □Pre-flash control:  Equipped with pre-flash cancel mode □Slave function □Sync cord : Sync cord/  N, Fiber-optic cable □Over-pressure relief valve □LED target light □Test flash function □TTL / READY confirmation audible signal

□Exposure control: DS-TTL,  Light level control dial (GN): 1/1.4/2/2.8/4/5.6/8/  11/16/20 (10 steps) □Pre-flash control:  Equipped with pre-flash cancel mode □DS-TTL function □Slave function □Auto power OFF function □Sync cord : Fiber-optic cable □Over-pressure relief valve □LED target light

Approx. 1,550g / 54.3oz

Weight

* Attached a fixing bolt to the Strobe.

Construction Body: corrosion-resistant aluminum alloy

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use. *2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries. * For compatible cameras, please refer to Compatibility List for the strobe and digital cameras on the SEA&SEA website.

O-ring

[Strobes and lights] Code

10580 62127 62142 62102 62116 18430 17210 62130

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

Set Set Set Set Set Set Set Set

for for for for for for for for

[DSLR and other housings] Item

YS-30 / 90 / 110α / 01 / 02 / D1 YS-250PRO YS-17 YS-25DX / AUTO YS-55TTL/E YS-120/N 5-pin Sync Cord/N LX-33

[Housings for compact cameras] Code

62134 62114 62107 62143 62128 62123

34

O-ring O-ring O-ring O-ring O-ring O-ring

Set Set Set Set Set Set

for for for for for for

Item

MDX-RX100/Ⅱ / DX-1G / 2G DX-5000G / 8000G DX-3000 / 3000G DX-1200HD / GE5 DX-860G DX-750G

Code

62144 62148 62146 62137 62136 62147 62138 62154 62155 62139 62125 62109 62121

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

Set Set Set Set Set Set Set Set Set Set Set Set Set

for for for for for for for for for for for for for

Item

RDX series housings MDX-70D / MDX-7D / D7000 MDX-D800 / D700 MDX-40D / PRO 5D Mark Ⅱ MDX-PRO MarkⅢ / D3 MDX- D7100 / D600 / D300s MDX-D300 MDX-X10 MDX-GRD Ⅳ MDX-G9 DX-5D DX-10D / 300D / D70 MDX-PRO MarkⅢ / DX-D50 / 350D / D200 / D80

[DSLR Ports and other accessories] Code

62145 62132 62101 62153 62140 62126 62152 56290

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

Set Set Set Set Set Set Set Set

for for for for for for for for

[Video housings] Code

Item

RDX ports DX macro ports NX ports Optional Strobe Connector TTL Converter Ⅲ / TTL Converter 250 / YS Converter TTL Converter Ⅱ VF45 / VF180 Compact macro port / CX compact dome port

Item

62120 O-ring Set for VX-G1 62118 O-ring Set for VX-FX1 62131 O-ring Set for VX-S1


Isla de Malpelo is a remote, solitary island off Colombia in an ocean famous for giant fish such as hammerhead sharks and whale sharks; however, I was more interested in clingfish! This is a charming little fish with a very appealing face. To avoid touching the attendant spiny sea urchins, I positioned my strobes from the sides. They reproduced the colours of the fish brilliantly, painting the fishes faint pink colour very naturally. MDX-70D YS-D1x2 with diffuser 100 EF100mm Macro USM 1/160sec F9 ISO200 Location: Isla de Malpelo, Columbia ⓒ Kyu Furumi

35


SEA&SEA SUNPAK Co., Ltd. R

B1F, TOCAD-Bldg., 1-4-6 Kitasenzoku, Ota-ku, Tokyo 145-0062, JAPAN TEL. +81-3-5701-5533 / FAX. +81-3-5701-5561 www.seaandsea.jp

●Specifications, external design of products and product features in this catalog may change without notice to improve products. ●There may be slight differences between actual products and product images in this catalog. ●The LCD images pictured in this catalog are simulated. ●The contents in this catalog are current as of April 2014. ●Company names and products are all trademarks of their respective companies. ●The use of the photographs, illustrations, and part or all of the text in this catalog without written prior consent is prohibited. 2014©SEA&SEA All Rights reserved.

Distributor / Dealer


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.