Construction professional machines
A Company of the SWAROVSKI Group www.tyrolit.com
Floor sawing
81
Floor grinding
101
Ring sawing
115
Pressing and Crushing
121
Table sawing
131
WALL SAWING
69
WIRE SAWING
Power Packs
POWER PACKS
55
FLOOR SAWING
Wire sawing
FLOOR GRINDING
37
Ring SAWING
Wall sawing
CRUSHER
5
TABLE SAWING
Core drilling
CORE DRILLING
Content
3
Core Drilling
ELECTRIC DRILL MOTOR dme18Sd Dry core drilling up to Ø 162 mm
Powerful 1,8 kW motor
Switchable soft impact
Compact and lightweight – ideal for dry drilling Powerful 1.8 kW motor for high productivity Selectable soft impact for hard materials Mechanical and electronic overload protection Optimal system solution with TYROLIT DDL core drills
6
Perfect dry drilling system with TYROLIT DDL core drills
Technical data
System DME18SD***
Voltage/Frequency
ACCESSORIES
230 V / 50 Hz
110 V / 60 Hz
707824
Adaptor 5/8" – M16
Type no.
10990375
10981133
10983964
Dust vacuum adaptor M16
Drill diameter range in masonry
30–162 mm
25–130 mm
10983845
Centering spike 120 mm
10986189
Centering spike 233 mm
10986190
Strap wrench
Nominal power
1.8 kW
1.7 kW
Nominal current
8.4 A
15 A
Load speed
1300 1/min
1050 1/min
No load speed
1850 1/min
1300 1/min
Soft impact
•
Load impact frequency
22000
No load impact frequency
31500
Motor cooling
Air
Tool attachment
5/8"
Operation
Hand-held / rig-based
Application
Dry
Electronic overload cut-out
•
Mechanical overload cut-out
CORE DRILLING
DRILL MOTORS
•
Drill rig attachment
Clamping collar 60 mm
DIMENSIONS & WEIGHT Length
426 mm
Width
101 mm
Height
165 mm
Weight
4.6 kg
Dry-Drill-Set TYPE NO. 10993016
CONTENT Drill Motor with soft impact DME18SD*** (230 V) Core drill DDL*** 81x150xM16 Adaptor 5/8“ – M16 Centering spike 233 mm Dust vacuum adaptor M16
Dry-Core-Bit-Set TYPE NO. 589539
CONTENT Core drill DDL*** 81x150xM16 Core drill DDL*** 67x150xM16 Adaptor 5/8“ – M16 Centering spike 233 mm Dust vacuum adaptor M16
7
ELECTRIC DRILL MOTORS DME20PW | DME20PU CORE DRILLING UP TO Ø 180 MM
Compact and ergonomic design
Built-in performance and service indicators as well as leveling aid
Efficient motor with very high drilling performance New, compact and ergonomic design Extremely robust due to full metal body and 3-gear oil bath gearbox Reliability and endurance based on mechanical and electronic overload cut-out Ease of use due to built-in performance and service indicators as well as leveling aid Universal application: hand-held/rig-based and wet/dry (DME20PU***)
8
Quick conversion between wet and dry drilling at DME20PU***
DRILL MOTORS Voltage/Frequency Type no.
System & Accessories DME20PW***
DME20PU***
230 V / 50 Hz
110 V / 60 Hz
230 V / 50 Hz
110 V / 60 Hz
10992077
10992078
10992079
10992080
Drill diameter range
15-180 mm
Nominal power Nominal current
2.0 kW 9.5 A
18 A
9.5 A
18 A
Load speed
520/1250/2700 1/min
No load speed
1010/2400/5200 1/min
Motor cooling
Air
Tool attachment (external)
1 ¼"
Tool attachment (internal)
½"
Operation Application
Hand-held / rig-based Wet
Wet / dry
Electric overload cut-out
•
Mechanical overload cut-out
•
PRCD protection switch
•
Performance indicator
•
Service indicator
•
Drill rig attachment
Clamping collar 60 mm
DIMENTIONS & WEIGHT Length
435 mm
450 mm
Width
105 mm
Height
300 mm
Weight
7.2 kg
CORE DRILLING SYSTEM DRU160*** 10992077
El. Drill motor DME20PW***
10987400
Drill rig DRU160***
976014
Vacuum set
984035
Vacuum pump CV 45 l/min, 0.8 bar EU
975381
Vacuum hose 3 m complete
CORE DRILLING
Technical data
ACCESSORIES 977593
Fastening bolt assembly for vacuum base
400439
Extension 1/2" 100 mm
359475
Extension 1/2" 200 mm
359476
Extension 1/2" 300 mm
889232
Extension 1/2" 400 mm
707230
Extension 1/2" 500 mm
378198
Extension 1 1/4" 100 mm
359471
Extension 1 1/4" 200 mm
359472
Extension 1 1/4" 300 mm
359473
Extension 1 1/4" 400 mm
359474
Extension 1 1/4" 500 mm
10994809
Anti-friction element 1 1/4"
974984
Supporting ring alum. 1 1/4"
7.4 kg
9
ELECTRIC DRILL MOTORS DME24MW | DME24UW CORE DRILLING UP TO Ø 250 MM
Very compact and light
Built-in performance and service indicators as well as leveling aid
Optimal handling thanks to very compact size and light weight Efficient motor with very high drilling performance Extremely robust due to full metal body and 3-gear oil bath gearbox Reliability and endurance based on mechanical and electronic overload cut-out Ease of use due to built-in performance and service indicators as well as leveling aid Various drill rig attachments: ModulDrillTM-quick change clamping system or universal plate
10
Time saving drill rig attachment using ModulDrillTM-quick change clamping system
DRILL MOTORS Voltage/Frequency Type no.
System & Accessories DME24MW***
DME24UW***
230 V / 50 Hz
110 V / 60 Hz
230 V / 50 Hz
110 V / 60 Hz
10992081
10992082
10992083
10992084
Drill diameter range
40-250 mm
Nominal power Nominal current
2.2 kW 10 A
20 A
10 A
20 A
Load speed
370/590/990 1/min
No load speed
710/1130/1900 1/min
Motor cooling
Air
Tool attachment (external)
1 ¼"
Tool attachment (internal)
½"
Operation
Rig-based
Application
Wet
Electric overload cut-out
•
Mechanical overload cut-out
•
PRCD protection switch
•
Performance indicator
•
Service indicator
•
Drill rig attachment DIMENTIONS & WEIGHT Length
465 mm
Width
115 mm
10992081
El. Drill motor DME24MW***
10987500
Drill rig DRA250***
977619
Fastening bolt assembly dowel feet
CORE DRILLING SYSTEM DRU250*** 10992081
El. Drill motor DME24MW***
10984500
Drill rig DRU250***
960795
Vacuum set
984035
Vacuum pump CV 45 l/min, 0.8 bar EU
975381
Vacuum hose 3 m complete
Accessories
Universal plate
ModulDrillTM
CORE DRILLING SYSTEM DRA250***
CORE DRILLING
Technical data
Height
175 mm
155 mm
Weight
7.6 kg
7.7 kg
977593
Fastening bolt assembly for vacuum base
400439
Extension 1/2" 100 mm
359475
Extension 1/2" 200 mm
359476
Extension 1/2" 300 mm
889232
Extension 1/2" 400 mm
707230
Extension 1/2" 500 mm
378198
Extension 1 1/4" 100 mm
359471
Extension 1 1/4" 200 mm
359472
Extension 1 1/4" 300 mm
359473
Extension 1 1/4" 400 mm
359474
Extension 1 1/4" 500 mm
10994809
Anti-friction element 1 1/4"
974984
Supporting ring alum. 1 1/4"
11
ELECTRIC DRILL MOTORS DME33MW | DME33UW CORE DRILLING UP TO Ø 450 MM
Large drill diameter range up to 450 mm
Built-in performance and service indicators as well as leveling aid
Practical carrying handle
High productivity based on optimal torque settings New ergonomic design Extremely robust due to full metal body and 3-gear oil bath gearbox Reliability and endurance based on mechanical and electronic overload cut-out Ease of use due to built-in performance and service indicators as well as leveling aid Various drill rig attachments: ModulDrillTM-quick change clamping system or universal plate
12
Technical data Voltage/Frequency Type no.
DME33MW***
DME33UW***
230 V / 50 Hz
110 V / 60 Hz
230 V / 50 Hz
110 V / 60 Hz
10992085
10992086
10992087
10992088
Drill diameter range
50-450 mm
Nominal power Nominal current
CORE DRILLING SYSTEM DRA400*** 10992085
El. Drill motor DME33MW***
10987600
Drill rig DRA40***
964906
ModulDrill distance plate Ø +180 mm
977619
Fastening bolt assembly dowel feet
3.3 kW 15.9 A
30 A
15.9 A
30 A
CORE DRILLING SYSTEM DRU400***
Load speed
180/430/750 1/min
10992085
El. Drill motor DME33MW***
No load speed
360/820/1240 1/min
10984600
Drill rig DRU400***
Motor cooling
Air
977368
Vacuum set
Tool attachment (external)
1 ¼"
984035
Vacuum pump CV 45 l/min, 0.8 bar EU
Operation
Rig-based
975381
Vacuum hose 3 m complete
Application
Wet
Electric overload cut-out
•
ACCESSORIES
Mechanical overload cut-out
•
977593
Fastening bolt assembly for vacuum base
PRCD protection switch
•
Performance indicator
•
378198
Extension 1 1/4" 100 mm
Service indicator
•
359471
Extension 1 1/4" 200 mm
359472
Extension 1 1/4" 300 mm
359473
Extension 1 1/4" 400 mm
359474
Extension 1 1/4" 500 mm
969138
Adapter 1 1/4" external - 1/2" internal
400439
Extension 1/2" 100 mm
359475
Extension 1/2" 200 mm
359476
Extension 1/2" 300 mm
889232
Extension 1/2" 400 mm
707230
Extension 1/2" 500 mm
10992646
Easy release element 1 1/4"
Drill rig attachment
Universal plate
ModulDrillTM
DIMENTIONS & WEIGHT Length
CORE DRILLING
DRILL MOTORS
System & Accessories
575 mm
Width
145 mm
Height
185 mm
180 mm
Weight
13.7 kg
13.6 kg
13
ELECTRIC DRILL MOTORS DME36MW | DME36UW CORE DRILLING UP TO Ø 450 MM
The new benchmark in terms of compactness and weight optimization
Innovative, powerful and service-friendly electric motor, based on P2® Technology
The new benchmark in terms of compactness and weight optimization Maximum productivity with innovative and efficient P2® drive technology Optimum drilling speed due to 6 electronically adjustable speeds Easy handling thanks to intelligent control panel with built-in performance and service indicators Reliability and durability due to mechanical and electronic overload protection High degree of protection IP66 against entry of dust and water insures safe operation including overhead drilling Various drill rig attachments: ModulDrill™-quick change clamping system or universal plate
14
Easy handling thanks to ergonomic control panel
System & Accessories
DRILL MOTORS
DME36MW***
DME36UW***
CORE DRILLING SYSTEM WITH DRA400***
Voltage/Frequency
230 V / 50-60 Hz
230 V / 50-60 Hz
10992201
Drill motor DME36MW***
10992201
10992202
10987600
Drill rig DRA400***
50-450 mm
964906
ModulDrill™ distance plate Ø +180 mm (ab Ø320 mm)
Nominal power
3.6 kW
977619
Fastening bolt assembly dowel feet
Nominal current
16 A
Type no. Drill diameter range
Speeds
190/240/290/350/470/580 1/min
CORE DRILLING SYSTEM WITH DRU400***
Motor cooling
Water
10992201
Drill motor DME36MW***
Tool attachment
1 ¼"
10984600
Drill rig DRU400***
Operation
Rig-based
977368
Vacuum plate
Application
Wet (dry)*
984035
Vacuum pump CV 45 l/min, 0.8 bar EU
Electronic overload cut-out
•
975381
Vacuum hose 3 m complete
Mechanical overload cut-out
•
Drill rig attachment
ModulDrill™
Universal
ACCESSORIES
Performance indicator
•
977593
Fastening bolt assembly for vacuum base
Service indicator
•
378198
Extension 1 1/4" 100 mm
359471
Extension 1 1/4" 200 mm
359472
Extension 1 1/4" 300 mm
DIMENSIONS & WEIGHT Length
510 mm
359473
Extension 1 1/4" 400 mm
Width
104 mm
359474
Extension 1 1/4" 500 mm
Height
190 mm
172 mm
Weight
12 kg
11.5 kg
CORE DRILLING
Technical data
* Water bypass valve
15
MODULAR DRILLING GEAR BOX ELECTRIC DGB1000 CORE DRILLING UP TO Ø 1000 MM Technical data MODULAR DRILLING GEARBOX Output at 16 A
8 kW
Output at 32 A
17 kW
Drill diameter range with DRA500***
150 - 500 mm
Drill diameter range with BC-2
150 - 1000 mm
Design 2-stage gearbox Special large hole flange ModulDrill quick change clamping system DIMENTIONS & WEIGHT Length
338 mm
Width
213 mm
Height
226 mm
Weight
15,7 kg
Tool attachment optimized for large hole drilling
Quick and easy drilling of large and deep holes
ModulDrill quick change clamping system – fast, simple and safe attachment
Extremely high performance - even in heavily reinforced concrete Modular use with high-frequency electric motors as well as standard hydraulic motors 8 stages for optimal speed - two stages at drilling gearbox and four stages via drive Optimized tool attachment for large diameters and high torque Self-explanatory and easy to operate
16
Holes up to a diameter of 1000 mm with ModulDrill distance plates
System recommendation
CORE DRILLING
Core drilling system electric from Ø 150 mm to Ø 500 mm
Core drilling system electric from Ø 150 mm to Ø 1000 mm
17
MODULAR DRILLING GEARBOX HYDRAULIC DGB1000 CORE DRILLING UP TO Ø 1000 MM Technical data MODULAR DRILLING GEARBOX Output
20 kW / 25 kW
Drill diameter range with DRA500***
150 - 500 mm
Drill diameter range with BC-2
150 - 1000 mm
Design 2-stage gearbox Special large hole flange ModulDrill quick change clamping system DIMENTIONS & WEIGHT Length
338 mm
Width
213 mm
Height
226 mm
Weight
15,7 kg
Tool attachment optimized for large hole drilling
Quick and easy drilling of large and deep holes
ModulDrill quick change clamping system – fast, simple and safe attachment
Extremely high performance - even in heavily reinforced concrete Modular use with standard hydraulic motors as well as high-frequency electric motors 8 stages for optimal speed - two stages at drilling gearbox and four stages via drive Optimized tool attachment for large diameters and high torque Self-explanatory and easy to operate
18
Holes up to a diameter of 1000 mm with ModulDrill distance plates
System recommendation
CORE DRILLING
Core drilling system hydraulic from Ø 150 mm to Ø 500 mm
Core drilling system hydraulic from Ø 150 mm to Ø 1000 mm
19
Core drilling system DRU160 Core drilling up to Ø 160 mm
Technical data Drill rig Dru160*** Drill diameter range
15 – 160 mm
Max. drill diameter with water collecting ring
130 mm
Max. drill bit length
560 mm
Design Aluminium dowel vacuum foot Feed using hand crank Diagonal adjustment 90°-45° Centre indicator Angle indicator Spirit level Adjustable feet (M12) Adjustable and interchangeable roller guides 2 handles Clamping collar Ø 60 mm Dimensions & weight
The light weight under the drill rigs up to Ø 160 mm Precision drilling using optimised support with stable roller guide
Length
400 mm
Width
200 mm
Height
866 mm
Weight
9 kg
Precise operation using high quality support with stable roller guidance
Universal operating range thanks to diagonal adjustment 90°-45°
Rapid assembly of popular drill motors using standard clamping collar system Time saving drilling rig using a centre indicator, angle indicator and spirit level Convenient operation using user friendly hand crank Maximum flexibility using either dowel or vacuum attachment facility Simplified set-up tasks and utilisation of the entire drill bit length due to well thought out system assembly
20
Efficient drill rig set-up using standard centralisation indicator
Accessories
Core drilling system DRU160***
Accessories
10987400
Drill rig DRU160P
976014
Vacuum set
10992077
El. drill motor DME20PW***
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
976014
Vacuum set
975372
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381
Vacuum hose 3 m complete
975381
Vacuum hose 3 m complete 977394
Quick grip device 1,7 - 3,1 m
977448
Clamp for quick grip device 1,7 - 3,1 m
977593
Fastening bolt assembly for vacuum base
977614
Fastening bolt assembly (masonry); for vacuum base
976136
Water retention ring complete Ø 70 mm
976134
Water retention ring complete Ø 130 mm
977437
Water retention ring holder; with centering device
977348
Gasket Ø 70 mm
976128
Gasket Ø 130 mm
974270
Extraction device for core bits
977353
Extraction device for cores
976616
Tool bag
10991465
Water tank 10 l
CORE DRILLING
System recommendation
21
Core drilling system DRU250 | DRA250 Core drilling up to Ø 250 mm Technical data Drill rig
DRA250***
Drill diameter range Max. drill diameter with water collecting ring Max. drill bit length
DRU250***
40 – 250 mm 200 mm 600 mm
582 mm
Design Aluminium dowel vacuum foot (DRU250***) Steel dowel foot (DRA250***) Two speed feed gearbox i=1:1 & i=1:3,5 Feed using hand crank Diagonal adjustment 90°-45° Centre indicator (DRU250***) Angle indicator Spirit level Adjustable feet (M12) Adjustable and interchangeable roller guides Handle
1
2
ModulDrill quick change clamping system Dimensions & weight
Impressive stability and drilling performance by means of rigid manufacture and robust drilling columns-wide gear teeth
Length
305 mm
447 mm
Width
205 mm
250 mm
Height
933 mm
908 mm
Weight
17 kg
14 kg
ModulDrill quick change clamping system – fast, simple and safe drill motor attachment
Fatigue free, ergonomic operation using fine feed operation (i= 1:3,5)
DRU250*** with aluminium dowel-vacuum foot
Drilling in very restricted space using steel dowel feet DRA250***
Precision drilling thanks to optimised support with stable roller guides Problem free transport together with easy assembly and dismantling due to compact lightweight construction Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system Easy operation with two speed feed gearbox as well as user friendly hand crank Simple drilling of diagonal bores using integrated angle indicator Maximum flexibility using dowel or vacuum attachment facility
22
System recommendation
Core drilling system DRA250***
Core drilling system DRU250***
10987500
Drill rig DRA250***
10984500
Drill rig DRU250***
10992081
El. drill. motor DME24MW***
10992081
El. drill. motor DME24MW***
977619
Fastening bolt assembly dowel feet
960795
Vacuum set
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381
Vacuum hose 3 m complete
Accessories 975378
Vacuum plate complete
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
Accessories
975372
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
960795
Vacuum set
975381
Vacuum hose 3 m complete
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381
Vacuum hose 3 m complete
961614
Ceiling prop
977394
Quick grip device 1,7 - 3,1 m
977448
Clamp for quick grip device 1,7 - 3,1 m
961614
Ceiling prop
977619
Fastening bolt assembly dowel feet
977394
Quick grip device 1,7 - 3,1 m
977448
Clamp for quick grip device 1,7 - 3,1 m
977593
Fastening bolt assembly for vacuum base
977614
Fastening bolt assembly (masonry); for vacuum base
977464
ModulDrill mounting plate
974270
Extraction device for core bits
977353
Extraction device for cores
977464
ModulDrill mounting plate
977392
Trolley chassis
10988902
Water retention ring complete Ø 200 mm
960785
Water retention ring holder; with centering device
960693
Gasket Ø 200 mm
974270
Extraction device for core bits
977353
Extraction device for cores
977392
Trolley chassis
967588
Tool bag
10991465
Water tank 10 l
967588
Tool bag
10991465
Water tank 10 l
CORE DRILLING
System recommendation
23
Core drilling system DRU350 Core drill holes up to Ø 350 mm
Technical data drill rig DRU350*** Drill diameter range
50 - 260 mm
Max. drill diameter with distance plate 180 mm
350 mm
Max. drill bit length
760 mm
Design Aluminium dowel foot Telescopic clamping system Two-speed feed gearbox i=1:1 & i=1:3,5 Feed using hand crank Angular adjustment 0°-180° Drilling and gripping column, rotatable by 360° Included undercarriage Adjustable feet Adjustable interchangeable precision guides 1 handle ModulDrill quick release clamping system Dimensions & weight
Drilling holes in walls, ceilings and floors is child's play thanks to intelligent design with drilling and gripping column that can be rotated by 360°
Length
380 mm
Width
250 mm
Height
1,860 mm
Weight
48 kg
Maximum flexibility thanks to drilling and gripping column that can be rotated by 360°
Quick set-up and dismantling thanks to innovative telescopic clamping system
Time-saving and material-protecting drill rig attachment using innovative telescopic clamping system Quick and reliable drill motor installation using well-tried ModulDrill quick change clamping system Convenient operation using two-speed feed gearbox Problem-free transportation using integrated undercarriage Additional flexibility from extending drilling column for long lead-in holes Universal deployment thanks to wide range of adjusting facilities Large selection of drilling accessories
24
Problem-free drilling of diagonal holes due to intelligent design
Accessories
Core drilling system DRu350***
Accessories
10984112
Drill rig DRU350P
10984542
1 m column extension
10992085
El. drill. motor DME33MW***
964906
ModulDrill distance plate Ø +180 mm
964906
ModulDrill distance plate Ø +180 mm
977464
ModulDrill mounting plate
974270
Extraction device for core bits
977353
Extraction device for cores
10991465
Water tank 10 l
CORE DRILLING
System suggestion
25
Core drilling system DRA400 | DRU400 Core drilling up to Ø 400 mm Technical data Drill rig
DRA400***
Drill diameter range Max. drill diameter with distance plate 180 mm
400 mm
Max. drill diameter with water collecting ring Max. drill bit length
DRU400***
50 – 250 mm 400 mm (250 mm*) 250 mm 746 mm
737 mm
* with vacuum fixing Design Aluminium dowel vacuum foot (DRU400***) Steel dowel foot (DRA400***) Two speed feed gearbox i=1:1 & i=1:3,5 Feed using hand crank Diagonal adjustment 90°-45° Centre indicator (DRU400***) Angle indicator Spirit level Adjustable feet (M12) Adjustable and interchangeable roller guides Handle
1
2
ModulDrill quick change clamping system Dimensions & weight Length
305 mm
Width
205 mm
507 mm 300 mm
Height
1,055 mm
1,063 mm
Weight
19 kg
18 kg
The professional core drilling system for a versatile range of applications Precision drilling using optimised support with stable guide rollers
Trouble free adjustable and interchangeable, low wear roller guides
Simple drilling of diagonal holes using angle indicator
DRA400*** with steel dowel feet
DRU400*** Vacuum fixing – Drilling without dowel fixing
Problem free transport together with easy assembly and dismantling by use of compact lightweight construction Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system Easy operation with two speed feed gearbox as well as user friendly hand crank Time saving drilling rig using a centre indicator, angle indicator and spirit level Maximum flexibility using dowel or vacuum attachment facility
26
System recommendation
Core drilling system DRA400***
Core drilling system DRU400***
10987600
Drill rig DRA400***
10984600
Drill rig DRU400***
10992085
El. drill. motor DME33MW***
10992085
El.drill. motor DME33MW***
964906
ModulDrill distance plate Ø +180 mm
977368
Vacuum plate
977619
Fastening bolt assembly dowel feet
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381
Vacuum hose 3 m complete
CORE DRILLING
System recommendation
Accessories 975378
Vacuum plate complete
Accessories
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
977368
Vacuum plate
975372
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
984035
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381
Vacuum hose 3 m complete
975372
Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381
Vacuum hose 3 m complete
961614
Ceiling prop
977394
Quick grip device 1,7 - 3,1 m
961614
Ceiling prop
977448
Clamp for quick grip device 1,7 - 3,1 m
977394
Quick grip device 1,7 - 3,1 m
977619
Fastening bolt assembly dowel feet
977448
Clamp for quick grip device 1,7 - 3,1 m
977593
Fastening bolt assembly for vacuum base
977614
Fastening bolt assembly (masonry); for vacuum base
964906
ModulDrill distance plate Ø +180 mm
977464
ModulDrill mounting plate
10988898
Water retention ring complete Ø 250 mm
977438
Water retention ring holder complete
977447
Gasket Ø 250 mm
974270
Extraction device for core bits
977353
Extraction device for cores
977392
Trolley chassis
967588
Tool bag
10991465
Water tank 10 l
964906
ModulDrill distance plate Ø +180 mm
977464
ModulDrill mounting plate
974270
Extraction device for core bits
977353
Extraction device for cores
977392
Trolley chassis
967588
Tool bag
10991465
Water tank 10 l
27
Core drilling system DRA500 Core drilling up to Ø 500 mm
Technical data Drill rig DRA500*** Drill diameter range
100 - 300 mm
Max. drill diameter with distance plate 180 mm
450 mm
Max. drill diameter with distance plate 250 mm
500 mm
Max. drill bit length
869 mm
Design Steel dowel foot Two speed feed gearbox i=1:1 & i=1:3,5 Feed using hand crank Diagonal adjustment 90°-45° Centre indicator Angle indicator Adjustable feet (M12) Adjustable and interchangeable roller guides 3 handles ModulDrill quick change clamping system Dimensions & weight
Maximum stability and drilling power for the greatest demands Precision drilling using optimised support with stable roller guides
Length
454 mm
Width
301 mm
Height
1,182 mm
Weight
26 kg
Drill column extensions from 230 to 910 mm
Highest loading capacity by use of extra wide, qualitative high quality drilling column gearing
Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system Easy operation with two speed feed gearbox as well as user friendly hand crank Simple drilling of diagonal holes using integrated angle indicator Increased flexibility using extendable drilling column for long lead-in holes Combined operation with Tyrolit Hydrostress wire saws as well as hydraulic drilling thanks to modular construction easily realisable
28
ModulDrill distance plate for holes up to 500 mm diameter
Accessories
Core drilling system DRA500***
Accessories
10987700
Drill rig DRA500P
974225
Vacuum plate complete
10992201
El. drill. motor DME36MW***
984035
Vacuum pump CV 45 l/min., 0,8 bar EU
964907
ModulDrill distance plate Ø +250 mm
975372
Vakuum pump CV 45 l/min., 0,8 bar CH
977619
Fastening bolt assembly
974524
Vacuum hose complete 3 m
977394
Quick grip device 1,7 - 3,1 m
977448
Clamp for quick grip device 1,7 - 3,1 m
977619
Fastening bolt assembly
984969
Rig extension 230 mm
984970
Rig extension 460 mm
984971
Rig extension 910 mm
977446
Additional support for rig extension; 910 mm
964906
ModulDrill distance plate Ø +180 mm
964907
ModulDrill distance plate Ø +250 mm
977464
ModulDrill mounting plate
974270
Extraction device for core bits
977353
Extraction device for cores
977392
Trolley chassis
964378
Tool box
10991465
Water tank 10 l
CORE DRILLING
System recommendation
29
Core drilling system DRA500 hydraulic Core drilling up to Ø 500 mm Technical data Drill rig DRA500*** Drill diameter range
100 - 250 mm
Max. drill diameter with distance plate 180 mm (Gearbox)
400 mm
Max. drill diameter with distance plate 250 mm (Gearbox)
500 mm
Max. drill bit length
825 mm
Design Steel dowel foot Two speed feed gearbox i=1:1 & i=1:3,5 Feed using hand crank or hydraulic drive Diagonal adjustment 90°-45° Centre indicator Angle indicator Adjustable feet (M12) Adjustable and interchangeable roller guides 3 handles ModulDrill quick change clamping system Dimensions & weight
Economical drilling with hydraulic drill and feed motor Precision drilling using optimised support with stable guide rollers
Length
454 mm
Width
301 mm
Height
1,182 mm
Weight
26 kg
Time saving drill motor mounting using ModulDrill quick change clamping system
Step less controllable drilling using powerful hydraulic feed
Problem free transport together with easy assembly and dismantling by use of compact lightweight construction Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system Easy operation with two speed feed gearbox through two-speed feed gearbox of hydraulic feed Increased flexibility using extendable drilling column for long lead-in holes Combined operation with Tyrolit Hydrostress wire saws as well as electric drilling thanks to modular structure is easily realisable
30
Maximum stability using rear solid double column support
Hydraulic drill motors (on drill spindle)
Core drilling system DRA500***
With hydraulic feed
10987700
Drill rig DRA500P
976156
Motor complete B 75 ccm / FD incl. PRV
976032
Motor complete B 145 ccm / FD incl. PRV
976157
Motor complete B 100 ccm / FD incl. PRV
974276
Drill spindle 1 1/4" complete incl. key
976032
Motor complete B 145 ccm / FD incl. PRV
960630
ModulDrill spindle clamp 250 mm
976033
Motor complete B 160 ccm / FD incl. PRV
960541
Hydraulic feed unit
977619
Fastening bolt assembly
CORE DRILLING
System recommendation
With manual feed (with control valve) 976146
Motor unit B 60 ccm / FD incl. PRV
Accessories
976147
Motor unit B 75 ccm / FD incl. PRV
977394
Quick grip device 1,7 - 3,1 m
976148
Motor unit B 100 ccm / FD incl. PRV
977448
Clamp for quick grip device 1,7 - 3,1 m
976023
Motor unit B 145 ccm / FD incl. PRV
977619
Fastening bolt assembly
976024
Motor unit B 160ccm / FD incl. PRV
984969
Rig extension 230 mm
984970
Rig extension 460 mm
984971
Rig extension 910 mm
977446
Additional support for rig extension; 910 mm
964906
ModulDrill distance plate Ø +180 mm
964907
ModulDrill distance plate Ø +250 mm
974270
Extraction device for core bits
977353
Extraction device for cores
977392
Trolley chassis
964378
Tool box
10991465
Water tank 10 l
31
CORE DRILLING SYSTEM BC-2 Core drill holes up to Ø 1,000 mm
Technical data Drill rig BC-2 Drill diameter range
100 - 400 mm
Max. drill diameter with distance plates
1000 mm
Max. drill bit length
980 mm
Design Steel dowel foot Two-speed feed gearbox i=1:2 and i=1:9 Feed using hand crank Can be adjusted to any angle Adjusting feet (micro) Dimensions & weight Length
460 mm
Width
290 mm
Height
1,340 mm
Weight
30 kg
Good stability and light weight due to 2-column guiding principle
Holes up to a diameter of 1000 mm with ModulDrill distance plates
Ideal for carrying out large hole drilling User-friendly working due to lightweight construction method using the 2-column guiding principle Convenient operation using two-speed feed gearbox Combined use of Tyrolit Hydrostress wire saws and hydraulic drilling is easy to achieve thanks to modular design Large selection of drilling accessories
32
Effortless drilling thanks to two-speed feed gearbox i=1:2 and i=1:9
Accessories
Core drilling system BC-2
Accessories
974266
Drill rig BC-2
964906
ModulDrill distance plate Ø +180 mm
984076
Fastening plate for ModulDrill
964907
ModulDrill distance plate Ø +250 mm
10991100
Drill gearbox DGB1000P
977464
ModulDrill mounting plate
10988900
Electric drive motor WSE1217P
974263
Feed gear 1:2/1:9 2-speed
974270
Extraction device for core bits
10989300
Electric control unit WSE1217P
977353
Extraction device for cores
10987583
Feed motor
977619
Fastening bolt assembly
977462
Handwheel complete
974264
Trolley chassis
975746
Tool box
10991465
Water tank 10 l
CORE DRILLING
System suggestion
33
Core drilling system BC-2 Hydraulic Core drill holes up to Ø 1,000 mm Technical data Drill rig BC-2 Drill diameter
100 - 350 mm
Max. drill diameter with 700 mm gear reduction arm
700 mm
Max. drill diameter with 1,000 mm gear reduction arm
1,000 mm
Max. drill bit length
830 mm
Design Steel dowel foot Two-speed feed gearbox i=1:2 and 1:9 Feed using hand crank or hydraulic drive Can be adjusted to any angle Adjusting feet (micro) Dimensions & weight Length
460 mm
Width
290 mm
Height
1,340 mm
Weight
30 kg
Gear reduction arm allows drilling of holes with diameter of up to 1,000 mm
Effective drilling using hydraulic feed
Economic drilling with hydraulic drilling and feed motor Ideal for carrying out large hole drilling User-friendly working due to lightweight construction method using the 2-column guiding principle Convenient operation using two-speed feed gearbox Combined use of Tyrolit Hydrostress wire saws and electric drilling is easy to achieve thanks to modular design Large selection of drilling accessories Core catching device bis 1000 mm
34
Good stability and light weight due to 2-column guiding principle
Accessories
Core drilling system BC-2, hydraulic
Hydraulic
974266
Drill rig BC-2
977462
Handwheel complete
976157
Motor complete B 100 ccm / FD incl. PRV
974276
Drill spindle 1 1/4" complete incl. key
977619
Fastening bolt assembly
974210
Extension arm 350 mm
974240
Hydraulic feed kit
974947
Adaptor BC 1 1/4" A
974263
Feed gear 1:2/1:9 2-speed
974270
Extraction device for core bits
977619
Fastening bolt assembly
977353
Extraction device for cores
974264
Trolley chassis
975746
Tool box
10991465
Water tank 10 l
Gear reduction arm
Hydraulic drill motors (on drill spindle)
Gear reduction arm module Gr700
With hydraulic feed
974283
Reduction ext. arm 700 mm i= 1:11
976156
Motor komplett B 75 ccm / FD inkl. DBV
976163
Motor complete B/S 30 ccm / FD
976157
Motor complete B 100 ccm / FD incl. PRV
976032
Motor complete B 145 ccm / FD incl. PRV
976033
Motor complete B 160 ccm / FD incl. PRV
Gear reduction arm module Gr1000 974280
Reduction ext. arm 1000mm i = 1:14
976163
Motor complete B/S 30 ccm / FD
CORE DRILLING
System suggestion
With manual feed (with control valve) 976146
Motor unit B 60 ccm / FD incl. PRV
Accessories for gear reduction arm
976147
Motor unit B 75 ccm / FD incl. PRV
974226
Extension GR 190 mm
976148
Motor unit B 100 ccm / FD incl. PRV
974227
Extension GR 360 mm
976023
Motor unit B 145 ccm / FD incl. PRV
974228
Extension GR 530 mm
976024
Motor unit B 160ccm / FD incl. PRV
977321
Large diameter flange
971294
GR-flange M30
10978286
GR-flange M30 with adapter 1 1/4"
974947
Adaptor BC 1 1/4" A
973925
Triplex chain for GR 1000
973926
Core catcher bush to GR
Hydraulic motors for gear reduction arm 976160
Motor complete B/S 16 ccm / FD
976161
Motor complete B/S 18 ccm / FD
976162
Motor complete B/S 22 ccm / FD
976523
Motor complete B/S 26 ccm / FD
976163
Motor complete B/S 30 ccm / FD
35
Wall Sawing
wall saw Ex Cutting depths up to 320 mm
Controller for 16 and 32 A operation. Light and easy to transport - weighs just 19 kg
All functions controllable via remote control unit
11 kW of power with overall weight of just 26 kg thanks to ergonomic design
Lightweight aluminium rail with guide inserts and toothing made from steel. 5.5 kg / 1.1 m
Different blade diameters can be used, max. 750 mm Optimum cutting speed due to integrated automatic feed mechanism Suitable for floor cutting and flush cutting due to the adjustable saw head (50 mm) Useful for quick, easy door and window cutting thanks to rail system with rotating rail support Quick and handy ALL-IN-ONE blade guard for corner, flush and normal cutting
38
Technical data
System & Accessories Wall saw system ex
Max. cutting depth
320 mm
10980700
Wall saw EX incl. feed motors
Max. saw blade Ø
750 mm
10978650
Electric main drive motor EX / 400V / 50Hz
Free detachable up to Ø
625 mm
10980800
Electric control unit EX - 400V/50Hz
Blade flange mounting
Central screw
10979519
Remote control EX
Saw blade fixing (flush cuts)
6 countersunk head screws, 90 mm graduated circle
10981778
Transport trolley EX
10980155
Blade guard 750 EX (all-in-one)
10978640
Track EX - 1100 mm
10978879
Track EX - 2200 mm
10980156
Rotary rail support EX
10980156
Rotary rail support EX
10980156
Rotary rail support EX
10980347
Tool box
Electric motor Water-cooled high-frequency motor Output at 16 A
8 kW
Output at 32 A
11 kW
Control unit Voltage
400 V
Frequency
50 Hz / 60 Hz
Weight
19.5 kg
Weight incl. drive motor and 2 feed motors
26 kg
with 2 feed motors only
11.8 kg
WALL SAWING
Saw blade
Accessories 10982508
Radio remote control EX
10981196
Track EX - 800 mm
10978640
Track EX - 1100 mm
10978879
Track EX - 2200 mm
10980260
Track connector for track
10980156
Rotary rail support EX
10983408
Swivel-stairs track foot EX
39
WALL SAW WSE1217 CUTTING DEPTHS UP TO 520 MM
Innovative, powerful and service-friendly electric motor without gearbox
Optimized radio remote control for better mobility and safety
Significantly increased reliability and cutting performance thanks to innovative Tyrolit P2 Technology Higher productivity due to reduced service costs and maintenance-friendly design Easy assembly and transport because of very lightweight, compact system components Optimized cutting characteristics thanks to new automatic feed mechanism Compatible with proven VAS rail system 4 applications using the modular system: Wall sawing / wire sawing / circular wire sawing / drilling
40
Lightweight control unit allows operations at 16 and 32 A
Technical data
System & Accessories WALL SAW SYSTEM WSE1217***
Max. cutting depth
520 mm
10989000
Wall Saw WSE1217*** incl. feed motors
Max. saw blade Ø
1200 mm
10988900
Electric main drive motor WSE1217*** 400 V | 50 Hz
Free detachable up to Ø
825 mm
10989300
Blade flange mounting
Quick-release flange
Electric control unit WSE1217*** 400 V | 50 Hz incl. radio remote control
Saw blade fixing (flush cuts)
6 countersunk head screws, 130 mm graduated circle
10981719
Transport trolley
10984100
Blade guard 1000 mm 3 parts All-In-One
10982079
VAS G Track | 1100 mm | alu
ELECTRIC MOTOR
10981818
VAS G Track | 2200 mm | alu
Water-cooled high-frequency motor without gearbox
977523
Track connector for VAS and VS tracks
Output at 16 A
8 kW
965987
V-Track feet alu, flat
Output at 32 A
17 kW
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
10980346
Tool box
CONTROL UNIT Voltage
400 V
Frequency
50 Hz | 60 Hz
ACCESSORIES
Weight
22 kg
977523
Track connector for VAS and VS tracks
10977882
Blade flange ST compl.
10984099
Blade guard 800 mm 3 parts All-In-One
WEIGHT Wall Saw WSE1217*** incl. feed motors
22 kg
10984100
Blade guard 1000 mm 3 parts All-In-One
Electric main drive motor WSE1217***
15 kg
10984101
Blade guard 1200 mm 3 parts All-In-One
965987
V-Track feet alu, flat
961983
V-Swivel track feet
10977452
V-Rotary rail support compl.
WALL SAWING
SAW BLADE
41
WALL SAW WSE2226 CUTTING DEPTHS UP TO 1005 MM
Optimal blade speed and torque due to innovative drive concept with 2-stage gearbox
Extremely low weight and robust All-In-One blade guard for normal, corner and flush cutting
Outstanding 26kW power and high reliability thanks to innovative TYROLIT P2® Technology Deeper cutting as well as universal fields of application due to cutting depths up to 1005 mm with blade diameter 2200 mm Quick service and low service costs provided by a maintenance-friendly design Easy handling and more safety thanks to radio remote control standard Timesaving assembly and transport because of very lightweight and compact system components
42
Cooling water bypass for dry cutting
Technical data
System & Accessories WALL SAW SYSTEM WSE2226
Max. cutting depth
1005 mm
10986600
Wall Saw WSE2226 incl. feed motors
Max. saw blade Ø
2200 mm
10986800
Electric main drive motor WSE2226 400 V / 50 Hz
Free detachable up to Ø
1025 mm
10986700
Blade flange mounting
Quick-release flange
Electric control unit WSE2226 400 V / 50 Hz incl. radio remote control
Saw blade fixing (flush cuts)
6 countersunk head screws, 130 mm graduated circle
10981719
Transport trolley
10989200
Blade guard 1200 mm All-In-One CL
10982079
VAS G Track / 1100 mm / alu
ELECTRIC MOTOR
10981818
VAS G Track / 2200 mm / alu
Water-cooled high-frequency motor
977523
Track connector for VAS and VS tracks
Output at 32 A
17 kW
965987
V-Track feet alu, flat
Output at 63 A
26 kW
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
10980346
Tool box
CONTROL UNIT Voltage
400 V / 50 Hz
Frequency
50 Hz
ACCESSORIES
Weight
26 kg
977523
Track connector for VAS and VS tracks
10977882
Blade flange ST compl.
10989200
Blade guard 1200 mm All-In-One CL
WEIGHT Wall Saw WSE2226*** incl. feed motors
26 kg
10992730
Blade guard holder AIO/Alu 2 pcs.
Electric main drive motor WSE2226***
25 kg
10984099
Blade guard 800 mm 3 pcs.. All-In-One
Blade guard 1200 mm All-In-One CL
22 kg
10992724
Uptake AIO800 on WSE2226
10984100
Blade guard 1000 mm 3 parts. All-In-One
10992726
Uptake AIO1000 on WSE2226
10984101
Blade guard 1200 mm 3 parts All-In-One
10992727
Uptake AIO1200 on WSE2226
977606
Blade guard 1600 mm 2 parts
976184
Blade guard 2200 mm 2 parts
10992734
Uptake 1600/2200 2 parts on WSE2226
965987
V-Track feet alu, flat
961983
V-Swivel track feet
10977452
V-Rotary rail support compl.
WALL SAWING
SAW BLADE
43
wall saw DZ-S2 Cutting depths up to 510 mm
Robust saw head with standard hydraulic motors
Blade guard for normal and flush cutting
Popular, well-tried and low-cost entry level model due to robust design and fair price/performance ratio Outstanding reliability and cutting accuracy thanks to extremely stable design Different blade diameters can be used, max. 1,200 mm Drive with 20 kW output
44
Slide guide with ergonomic locking system and fine adjustment
Technical data
System & Accessories Wall saw system DZ-S2
Max. cutting depth
510 mm
10984000
Wall saw DZ-S2 without motor
Max. saw blade Ø
1,200 mm
976162
Motor complete B/S 22 ccm / FD
Free detachable up to Ø
900 mm
10984100
Blade guard 1000 mm 3 parts All-In-One
Blade flange mounting
Central screw
10982079
VAS G Track / 1100 mm / alu
Saw blade fixing (flush cuts)
6 countersunk head screws, 130 mm graduated circle
10981818
VAS G Track / 2200 mm / alu
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
975803
Tool box
977495
Pressure relief valve FD
Design GR2 hydraulic motor with quick-change device Swivel arm, can be rotated by 360° Power transmission in swivel arm via toothed belt Carriage controlled using bronze guide
WALL SAWING
Saw blade
Accessories
Weight incl. drive motor and 2 feed motors
34 kg
with 2 feed motors only
27 kg
973921
1 bronze guide complete
974419
Flush cutting flange DZ, FZ
969460
Tooth belt for DZ-S, DZ-S2
10984099
Blade guard 800 mm 3 parts All-In-One
10984100
Blade guard 1000 mm 3 parts All-In-One
10984101
Blade guard 1200 mm 3 parts All-In-One
Hydraulic drive motor accessories – size 2 with horizontal FD couplings 976034
Motor complete B/S 12 ccm / FD
976160
Motor complete B/S 16 ccm / FD
976161
Motor complete B/S 18 ccm / FD
976162
Motor complete B/S 22 ccm / FD
976523
Motor complete B/S 26 ccm / FD
976163
Motor complete B/S 30 ccm / FD
973892
Quick-change set for motors size 2
45
Wall saw WZ Cutting depths up to 710 mm
Wall saw head made from high-strength aluminium alloy, gear swivel arm and roller guides
Geared swivel arm with quick-release flange holder
Lightweight and ergonomic, since wall saw head manufactured using state-of-the-art technology and high proportion of high-strength aluminium alloy components Quick and easy blade change and easier to use for flush cutting due to quick-release flange on swivel arm Quicker sawing thanks to innovative feed motors Different blade diameters can be used, max. 1,600 mm Drive with 25 kW output
46
Wall saw head is quick and easy to install
Technical data
System & Accessories Wall saw system WZ
Max. cutting depth
710 mm
10982000
Wall saw WZ
Max. saw blade Ø
1,600 mm
10977627
Motor complete WZ 22ccm/FD
Free detachable up to Ø
825 mm
10984100
Blade guard 1000 mm 3 parts All-In-One
Blade flange mounting
Quick-release flange
10982079
VAS G Track / 1100 mm / alu
Saw blade fixing (flush cuts)
6 countersunk head screws, 130 mm graduated circle
10981818
VAS G Track / 2200 mm / alu
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
965987
V-Track feet alu, flat
977495
Pressure relief valve FD
10977996
Tool box
Design GR2 hydraulic motor with quick-change device Swivel arm, can be rotated by 360° Power transmission in swivel arm via gear wheel Carriage guided by rollers
WALL SAWING
Saw blade
Accessories
Weight incl. drive motor and 2 feed motors
29 kg
with 2 feed motors only
24 kg
10977882
Blade flange ST compl.
10984099
Blade guard 800 mm 3 parts All-In-One
10984100
Blade guard 1000 mm 3 parts All-In-One
10984101
Blade guard 1200 mm 3 parts All-In-One
977606
Blade guard 1600 mm 2 parts
977334
Blade guard holder 2 parts for bolt
Hydraulic drive motors – size 2 10977625
Motor complete WZ 16ccm/FD
10977626
Motor complete WZ 18ccm/FD
10977627
Motor complete WZ 22ccm/FD
10977628
Motor complete WZ 26ccm/FD
10978079
Motor complete WZ 30ccm/FD
47
wall saw FZ-4S Cutting depths up to 1,005 mm
Main motor with leakage oil connection
Geared swivel arm with quick-release flange for easy blade change
Guaranteed cutting accuracy even under heavy load due to robust design with gear swivel arm Easy transport and simple installation thanks to quickly removable main motor Quick and easy blade change and easier to use for flush cutting due to quick-release flange on swivel arm Different blade diameters can be used, max. 2,200 mm Drive with 40 kW output
48
Slide guide with ergonomic locking system and fine adjustment
Technical data
System & Accessories wall saw system FZ-4s
Max. cutting depth
1,005 mm
999039
Wall saw FZ-4S
Max. saw blade Ø
2,200 mm
976166
Motor complete S 31ccm/FD; incl. leak oil conn.
Free detachable up to Ø
1,025 mm
10984100
Blade guard 1000 mm 3 parts All-In-One
Blade flange mounting
Quick-release flange
974400
V-Track VS 1100mm steel
Saw blade fixing (flush cuts)
6 countersunk head screws, 130 mm graduated circle
974406
V-Track VS 2200mm steel
974478
V-Track foot steel DZ/FZ
974478
V-Track foot steel DZ/FZ
974478
V-Track foot steel DZ/FZ
974066
Leakage oil hose 8 m FIRG
977495
Pressure relief valve FD
10977020
Tool box
Design GR3 hydraulic motor with quick change device (also possible with GR2) Swivel arm, can be rotated by 360° Power transmission in swivel arm via gear wheel Carriage controlled using Bronce Prisma
WALL SAWING
Saw blade
Accessories
Weight incl. drive motor and 2 feed motors
47 kg
with 2 feed motors only
39 kg
973921
1 bronze guide complete
10977882
Blade flange ST compl.
10984099
Blade guard 800 mm 3 parts All-In-One
10984100
Blade guard 1000 mm 3 parts All-In-One
10984101
Blade guard 1200 mm 3 parts All-In-One
977606
Blade guard 1600 mm 2 parts
976184
Blade guard 2200 mm 2 parts
977334
Blade guard holder 2 parts for bolt
Hydraulic drive motors – size 3 976164
Motor complete S 20ccm/FD; incl. leak oil conn.
976165
Motor complete S 25ccm/FD; incl. leak oil conn.
976166
Motor complete S 31ccm/FD; incl. leak oil conn.
976167
Motor complete S 40ccm/FD; incl. leak oil conn.
974066
Leakage oil hose 8 m FIRG
49
VAs and VS rail system Versatile: can be used for wall saws, corner saws and series-drilled holes
vAS
vS
Lightweight aluminium rail suitable for applications up to 26 kW
Robust steel rail, suitable for applications up to 50 kW
Steel guides
Steel guides
Replaceable steel toothing
Extendable
Extendable
V-rotating rail trestle, can be swivelled by 360°
V-swivel rail trestle, 45° - 135°
V-rail trestle, aluminium, flat
V-rail trestle, steel
Time saved when changing the rail position thanks to innovative V-rotating rail support
50
System & Accessories VAS
VS
Approved power
25 kW
50 kW
10982079
VAS G Track / 1100 mm / alu
Weight at 1,100 mm
9.3 kg
13.8 kg
10982104
VAS G Track / 1375 mm / alu
Aluminium / steel
Steel
10982105
VAS G Track / 1650 mm / alu
•
•
10982106
VAS G Track / 1925 mm / alu
1,100 mm
700 mm
10981818
VAS G Track / 2200 mm / alu
1,375 mm
1,100 mm
1,650 mm
1,400 mm
VAS accessories
1,925 mm
1,800 mm
965987
V-Track feet alu, flat
2,200 mm
2,200 mm
961983
V-Swivel track feet
10977452
V-rotary rail support complete
977523
Track connector for VAS and VS tracks
963917
Centering tube for VAS/VS tracks
Material Extendable Length
Compatible wall saws
VAS rail system
WX-15 / WSE1217 / WSE2226
•
•
10978418
Track stop for VAS track
DZ-S2
•
•
974476
Mounting block for track foot; vacuum base (concrete)
WZ
•
•
977452
Mounting block for track foot: vacuum base (masonry)
FZ-2ST
•
•
10978418
Track stop
FZ-4S
WALL SAWING
Technical data
• VS rail system
Rail trestles V-rail trestle, steel
974398
V-Track VS 700mm steel
•
974400
V-Track VS 1100mm steel
V-rail trestle, aluminium
•
•
974402
V-Track VS 1400mm steel
V-swivel rail trestle
•
•
974404
V-Track VS 1800mm steel
V-rotating rail trestle
•
•
974406
V-Track VS 2200mm steel
VS accessories 974478
V-Track foot steel DZ/FZ
961983
V-Swivel track feet
10977452
V-rotary rail support complete
977523
Track connector for VAS and VS tracks
10978418
Track stop
Well thought-out connecting elements for quick assembly and a rigid connection
Rail stopper for safe working
With V rotating rail support, simple step sawing
51
ALL-IN-ONE blade guard For normal, corner and flush cutting
For normal and flush cutting
Robust swivelling unit
3 models for saw blade diameters up to 800 mm, 1000 mm and 1200 mm Easy handling and long service life due to use of robust materials Quick and easy conversion with just a few manual operations
52
Side parts and middle part are connected with a functional clamping device
Blade guard, all-in-one, 3-piece
Blade guard, 2-piece
10984099
Blade guard 800 mm 3 parts All-In-One
10977132
Blade guard 1460 mm 2 parts
10984100
Blade guard 1000 mm 3 parts All-In-One
977606
Blade guard 1600 mm 2 parts
10984101
Blade guard 1200 mm 3 parts All-In-One
976184
Blade guard 2200 mm 2 parts
977334
Blade guard holder 2 parts for bolt
WALL SAWING
System & Accessories
53
Wire Sawing
Wire saw SK-SD Gross wire length 10.8 m
Quick conversion from drill rig to wire saw
Sophisticated wire store
Suitable for building structures up to 7.4 m in size as standard thanks to large wire store Quick, reliable and simple working by directly attaching the wire saw to the cutting surface Conversion to a core drill rig with just 2 screws
56
Wire can be placed into the machine intact
Technical data
System & Accessories
Wire
Wire saw system sk-sd
Wire store
7.4 m
974266
Drill rig BC-2
Gross wire length
10.8 m
977084
Wire saw kit SK-SD excl. BC-2
Wire Ø, sintered
11 mm
976655
Motor complete S/S 8+19ccm/FD
Wire Ø, galvanic
10 mm
977597
Hydraulic feed kit SK-SD
977592
Protection cover SK-SD
Design
974264
Trolley chassis
Hydraulic motor GR2
975746
Tool box
Diverter rolls Ø 200 mm
Accessories
Wire fed from wire store hydraulically
977235
Motor complete S/S 8+11ccm/FD
976655
Motor complete S/S 8+19ccm/FD
980679
Motor complete S/S 11+22ccm/FD
Dimensions & weight Height
1,340 mm
980680
Motor complete S/S 11+30ccm/FD
Width
920 mm
977597
Hydraulic feed kit SK-SD
Depth
810 mm
10989134
Feed motor incl. PRV
Weight without drill rig
66 kg
977592
Protection cover SK-SD
Weight with drill rig BC-2
96 kg
977083
Water lance 2,5 m
10988618
Water lance 8 m
964254
Pulley Ø 200 mm
964419
Pulley Ø 200 mm with hole Ø 13 mm
977529
Lining for pulley Ø 200 mm
976998
Drive wheel Ø 280mm
977002
Swivel pulley Ø 200 mm with holder
977613
Protective sleeve, cpl.
WIRE SAWING
2 drive rolls Ø 280 mm
57
Wire saw WCE14 Overall WIRE length 14.2 m
Extremely simple operation of wire storage unit
Fine feed control – ensures maximum freedom using new, innovative damping system
Extremely large wire storage and long travel to give the greatest possible application and use Maximum size of unit up to 11 m Fine feed for application control using innovative damping system Electric soft start allows a slow start for the wire and guarantees extreme safety Patented drive roll system Part of the modular TYROLIT Hydrostress system: Main motor, control and remote control also installable for the wall saw and drilling applications
58
Electric main and feed motors for extremely smooth wire conserving sawing
Technical data
System & Accessories
wire
Wire saw system WCE14***
Wire storage
11 m
10987700
Drill rig DRA500***
Overall wire length
14.2 m
10989700
Wire saw kit WCE14*** incl. feed motor
Wire Ø, sintered
11 mm
10988900
Electric main drive motor
Wire Ø, galvanised
10 mm
10989300
Electric control unit WSE1217*** 400 V / 50 Hz incl. remote control
10988525
Protection hood
977392
Trolley chassis
964378
Tool box
Electric motor Power 16 A
8 kW
Power 32 A
17 kW
Voltage
400 V
Frequency
50 Hz / 60 Hz
Weight
22 kg
Design 2 drive rolls Ø 200 mm Diverter rolls Ø 200 mm Feed wire storage electric Dimensions & weight Height
1517 mm
Width
615 mm
Depth
798 mm
Weight without drill rig
83 kg
Weight with drill rig DRA500***
109 kg
977392
Trolley chassis
964378
Tool box
10988555
Template WCU14***
10988525
Protection hood
977083
Water lance 2,5 m
10988901
Water distributor unit complete
10988618
Water lance 8 m
10993808
Damper lock
960575
Drive wheel lining Ø 200 mm
961901
Pulley Ø 200 mm
977613
Protective sleeve, cpl.
10988505
Swivel pulley out
10988533
Swivel pulley in
10988391
Pulley Ø 200 mm (narrow)
10988390
Pulley 11° Ø 200 mm (narrow)
WIRE SAWING
Accessories
Control
59
Wire saw WCH14 Overall rope length 14.2 m
Wire storage up to 14 m – the more wire, the more applications
Problem free starting and extremely wire friendly due to innovative damping system
Faster, safer and simpler wire saws Extremely large wire storage and long travel to give the greatest possible application and use Maximum size of unit up to 11 m Fine feed for application control using innovative damping system Wire saw for direct assembly Heaviest single part 20 kg Patented drive roll system Extreme flexibility, converted in a few minutes from a drill rig to a wire saw
60
Hydraulic main and feed motors for TYROLIT Hydrostress drive units
Technical data
System & Accessories
wire
Wire saw system WCH14***
Wire storage
11 m
10987700
Drill rig DRA500***
Overall wire length
14.2 m
10984300
Wire saw kit WCH14*** incl. feed motor
Wire Ø, sintered
11 mm
976161
Motor complete B/S 18 ccm / FD
Wire Ø, galvanised
10 mm
10988525
Protection hood
977392
Trolley chassis
964378
Tool box
Design 2 drive rolls Ø 200 mm
Accessories
Diverter rolls Ø 200 mm
977392
Trolley chassis
Feed wire storage hydraulically
964378
Tool box
10988555
Template WCU14***
10988525
Protection hood
Dimensions & weight Height
1517 mm
977083
Water lance 2,5 m
Width
615 mm
10988618
Water lance 8 m
Depth
798 mm
10988901
Water distributor unit complete
Weight without drill rig
78 kg
10993808
Damper lock
Weight with drill rig DRA500***
104 kg
976160
Motor complete B/S 16 ccm / FD
976161
Motor complete B/S 18 ccm / FD
976162
Motor complete B/S 22 ccm / FD
973892
Quick-change set for motors size 2
10988496
Hydraulic feed with gearbox
960575
Drive wheel lining Ø 200 mm (75 Shore)
961901
Pulley Ø 200 mm
977613
Protective sleeve, cpl.
10988505
Swivel pulley out
10988533
Swivel pulley in
10988391
Pulley Ø 200 mm (narrow)
10988390
Pulley 11° Ø 200 mm (narrow)
WIRE SAWING
Hydraulic motor GR2
61
Wire saw SB Gross wire length 15.5 m
Good power transmission because of multiple roll drive
Quiet running because of hydraulic wire tensioner
Suitable for building structures up to 10 m in size as standard thanks to large wire store Large wire store in a small space High performance because of multiple roll drive
62
Size of wire store can be decreased or increased without tools
Technical data
System & Accessories
Wire
Wire saw system sb
Wire store
10 m
961946
Wire saw SB
Gross wire length
15.5 m
976165
Motor complete S 25ccm/FD; incl. leak oil conn.
Wire Ø, sintered
11 mm
974066
Leakage oil hose 8 m FIRG
Wire Ø, galvanic
10 mm 976164
Motor complete S 20ccm/FD; incl. leak oil conn.
Hydraulic motor GR3
976165
Motor complete S 25ccm/FD; incl. leak oil conn.
7 drive rolls Ø 200 mm
976166
Motor complete S 31ccm/FD; incl. leak oil conn.
Diverter rolls Ø 200 mm
961902
Pulley Ø 200 mm with hole Ø 13 mm (75 Shore)
Wire fed from wire store using hydraulic cylinder
961901
Pulley Ø 200 mm
960575
Drive wheel lining Ø 200 mm (75 Shore)
977529
Lining for pulley Ø 200 mm
Dimensions & weight Height
1,310 mm
977083
Water lance 2,5 m
Width
735 mm
977613
Protective sleeve, cpl.
Depth
750 mm
10988618
Water lance 8 m
Weight
170 kg
WIRE SAWING
Accessories Design
63
Circular wire saw CCH25/ CCE25 Circular cuts of Ø 500 mm – 2500 mm
Standard hydraulic drive motor
Wire can be easily inserted and tensioned
Flexible water supply
Replaces expensive, heavy large hole drills Safe to use thanks to concealed wires Easy to use thanks to well thought-out design Hydraulic or electric drive Suitable for additional wall saw, wire saw, circular wire saw and drilling work by means of modular expansion system consisting of main motor, controller and remote control.
64
Technical data
System & Accessories
Wire
Wire saw system
Wire length for hole diameter 500 mm (100 mm thickness)
4m
Wire length for hole diameter 2,500 mm (600 mm thickness)
6.2 m
Wire Ø, sintered
11 mm
Wire Ø, galvanic
10 mm
Hydraulic version Hydraulic motor GR2 1 drive roll Ø 200 mm
967610
Circular wire saw base machine
980759
Feed motor hydraulic 50ccm
976160
Motor complete B/S 16 ccm / FD
973892
Quick-change set for motors size 2
Wire saw system CCE25*** 10990500
Circular wire saw CCE25***
10988900
Electric main drive motor WSE1217*** 400 V / 50 Hz
10989300
Electric control unit WSE1217*** 400 V / 50 Hz incl. radio remote control
Diverter rolls Ø 200 mm Wire fed from wire store hydraulically Electric version 1 drive rolls Ø 200 mm (180) Diverter rolls Ø 200 mm (180) Wire fed from wire store electrically Electric motor Output 16 A
8 kW
Output 32 A
17 kW
Control unit Voltage
400 V
Frequency
50 Hz / 60 Hz
Weight
22 kg
964887
Center tube SL adjustment
978788
Cantilever pipe, short (up to 1.25 m dia.)
978764
Cantilever pipe, long (up to 2.5 m dia.)
978786
Splash protection channel (Ø 2,5 m)
978787
Splash protection channel (Ø 1,25 m)
977083
Water lance 2,5 m
964254
Pulley Ø 200 mm
969413
Drive wheel SL Ø 200 mm
977529
Lining for pulley Ø 200 mm
960575
Drive wheel lining Ø 200 mm (75 Shore)
WIRE SAWING
Accessories
Weight Weight
122 kg
65
Wire saw accessories
Plunge tube
3
1 2
4 100% 15%
5
Equipment for cutting a cube out of concrete foundations
6
Immersion wire saw procedure for horizontal and vertical cutting. Cutting depths up to 2.5 m
Diverter rolls for wire guidance
Universal support: Wire can be diverted in any direction
66
Room diverter roll: Wire diversion with two adjustable axes
Diverter roll: Wire diversion with one adjustable axis
Support roll: Eliminates sagging wire and reduces vibration
Diverter rolls
Accessories
Accessories
964256
Plunge wire sawing assembly right side
980712
Frame short
964253
Plunge wire sawing assembly left side
980723
Frame long
977099
Base swivel pulley for plunge tube (left)
977536
Universal pulley frame left
10982439
Base swivel pulley for plunge tube (right)
977535
Universal pulley frame right
980713
Swivel pulley for universal pulley frame
969109
Template for wall mounting; of wire sawing frame
980722
Multi-direction guide pulley; with support
964254
Pulley Ø 200 mm
964419
Pulley Ø 200 mm with hole Ø 13 mm
980714
Individual pulley Ø 200 mm with support
980706
2 support pulleys with holder
WIRE SAWING
Plunge tube
67
Power Packs
Drive unit PPH20 Output 20 kW
Ergonomically arranged control elements
Safe because of top quality electrical components
Suitable for wall saws, wire saws and drilling Ideal cutting speed due to having 2 settings Robust, reliable structure Service-friendly thanks to removable plastic cover
70
Pressure gauge displays for main circuit and feed circuit
Technical data
System & Accessories
Electric motor Output
Drive unit pph20** 20 kW
Hydraulics
10983600 *
Drive unit PPH20S / 380-420V / 50Hz
976206
Hose package 5pieces 8 m FD
975672
Hose package 2pieces 8 m FF (feed)
Pressure stages
2
2 feed circuits
Gear pump
Accessories
Main circuit
Double gear pump
973072
El.-plug CEE 32/5pol.
999578
On/Off valve for wire sawing
Output Stage 1
33 l / min at 260 bar
Stage 2
40 l / min at 210 bar
* Different voltage types are available upon request.
Electrical equipment Voltage
200 V / 400 V / 480 V
Frequency
50 Hz / 60 Hz
Current consumption (400V / 50 Hz)
32 A
Length
720 mm
Width
475 mm
Height
988 mm
Weight
140 kg
POWER PACKS
Dimensions
71
Drive unit PPH20RR Output 20 kW
Freedom of movement thanks to radio remote control. All functions selectable via radio remote control
Direction of rotation switch, secondary connections, hour counter
Suitable for wall saws, wire saws and drilling Ideal cutting speed due to having 4 settings Soft start of wire using potentiometer Service-friendly thanks to quick-release plastic cover
72
The plastic cover can be removed without tools
Technical data
System & Accessories
Electric motor Output
Drive unit pph20RR*** 20 kW
Hydraulics
10983500 *
Drive unit PPH20RRP / 380-420V / 50Hz / Freq. 434MHz
976206
Hose package 5pieces 8 m FD
975672
Hose package 2pieces 8 m FF (feed)
Pressure stages
4
2 feed circuits
Radial piston pump
Accessories
Main circuit
Triple gear pump
973072
Output
El.-plug CEE 32/5pol.
* Different voltage and frequency types are available upon request.
Stage 1
33 l / min at 260 bar
Stage 2
40 l / min at 215 bar
Stage 3
50 l / min at 180 bar
Stage 4
60 l / min at 150 bar
Electrical equipment Voltage
200 V / 230 V / 380 V / 400 V / 480 V
Frequency
50 Hz / 60 Hz
Current consumption (400 V)
32 A
2 secondary connections, 230 V / 50 Hz / 10 A (400 V / 50 Hz only)
Length
760 mm
Width
550 mm
Height
1,140 mm
Weight
160 kg
POWER PACKS
Dimensions
73
Drive unit PPH25 Power 25 kW
Ergonomically arranged control elements
Safer due to use of high quality electric components
Suitable for wall sawing, wire sawing and drilling Ideal cutting speed using 2 stage adjustment Simple operation directly at the equipment with few hand movements Service-friendly thanks to plastic cover
74
Pressure gauges for main and feed circuits
Technical data
System & Accessories
Electric motor Power
Drive unit pph25** 25 kW
Hydraulic
10984200 *
Drive unit PPH25S / 380-420 V / 50 Hz
976206
Hose package 5pieces 8 m FD
975672
Hose package 2pieces 8 m FF (feed)
Pressure stages
2
2 feed circuits
Gear wheel
Accessories
Main circuit
Dual gear pump
973074
El.-plug CEE 63/5pol.
999578
On/Off valve for wire sawing
Power Stage 1
45 l / min at 230 bar
Stage 2
50 l / min at 200 bar
* Different voltage types are available upon request.
Electric Voltage
400 V / 480 V
Frequency
50 Hz / 60 Hz
Current consumption (400 V / 50 Hz)
42 A
Length
720 mm
Width
475 mm
Height
988 mm
Weight
145 kg
POWER PACKS
Dimensions
75
Drive unit PPH25RR Output 25 kW
Freedom of movement thanks to radio remote control. All functions selectable via radio remote control
Pressure stages selectable using rotary switch
Suitable for wall saws, wire saws and drilling Ideal cutting speed due to having 4 settings Soft start of wire using potentiometer Service-friendly thanks to quick-release plastic cover
76
The plastic cover can be removed without tools
Technical data
System & Accessories
Electric motor Output
Drive unit pph25RR*** 25 kW
Hydraulics
10983900 *
Drive unit PPH25RRP / 380-420V / 50Hz / Freq. 434MHz
976206
Hose package 5pieces 8 m FD
975672
Hose package 2pieces 8 m FF (feed)
Pressure stages
4
2 feed circuits
Radial piston pump
Accessories
Main circuit
Triple gear pump
973074
Output
El.-plug CEE 63/5pol.
* Different voltage and frequency types are available upon request.
Stage 1
45 l / min at 230 bar
Stage 2
50 l / min at 200 bar
Stage 3
60 l / min at 170 bar
Stage 4
70 l / min at 140 bar
Electrical equipment Voltage
380 V / 400 V / 480 V
Frequency
50 Hz / 60 HZ
Current consumption (400 V / 50 Hz)
42 A
2 secondary connections, (230 V / 50 Hz / 10 A (400 V / 50 Hz only)
Length
760 mm
Width
550 mm
Height
1,140 mm
Weight
170 kg
POWER PACKS
Dimensions
77
Drive unit PPH40RR Output 40 kW
Freedom of movement thanks to radio remote control. All functions selectable via radio remote control
Direction of rotation switch, secondary connections, hour counter
Suitable for wall saws, wire saws and drilling Ideal cutting speed due to having 4 settings Soft start of wire using potentiometer Service-friendly thanks to quick-release plastic cover
78
The plastic cover can be removed without tools
Technical data
System & Accessories Drive unit pph40RR***
Electric motor Output
40 kW
Hydraulics Pressure stages
4
2 feed circuits
Radial piston pump
Main circuit
Triple gear pump
10983400 *
Drive unit PPH40RRP / 380-420V / 50Hz / Freq. 434MHz
975672
Hose package 2pieces 8 m FF (feed)
975672
Hose package 2pieces 8 m FF (feed)
976207
Hose package 3pieces 8 m FD
Accessories 973074
El.-plug CEE 63/5pol.
Output Stage 1
65 l / min at 250 bar
Stage 2
75 l / min at 220 bar
Stage 3
80 l / min at 200 bar
Stage 4
90 l / min at 180 bar
* Different voltage and frequency types are available upon request.
Electrical equipment Voltage
380 V / 400 V / 460 V / 575 V
Frequency
50 Hz / 60 Hz
Current consumption (400 V / 50 Hz)
60 A
2 secondary connections, 230 V / 50 Hz / 10 A (400 V / 50 Hz only)
Length
820 mm
Width
560 mm
Height
1,260 mm
Weight
238 kg
POWER PACKS
Dimensions
79
Floor Sawing
Floor saw FSG513 Cutting depths up to 170 mm
User friendly depth of cut setting and simple speed control
Optimised centre of gravity over the cutting shaft
Excellent cutting performance due to intelligent weight distribution Easy handling due to ergonomically arranged operating elements High load resistance and vibration reduction thanks to robust, high quality chassis Increased flexibility due to left and right hand cutting functions as well as corner flush cutting function Problem free and safe transport by means of a balanced transport hook Optimum tool cooling using reliable water supply Service friendly machine construction Reliable Honda petrol engine with cyclone filter Precise cutting guide using a standard cut indicator Maximum safety by using a centrally positioned emergency stop switch and integrated brake
82
Universal operation with left and right cutting function
Technical data
System & Accessories
Saw blade
Floor saw FSG513***
Max. cutting depth
170 mm
10988800
Floor saw FSG513P incl. water tank kit
Max. saw blade Ø
450 mm
10988500
Floor saw FSG513P
Saw blade speed
2600 1/min
Saw blade uptake Ø
25.4 mm
Accessories
Carrier Ø
11.5 mm
10988783
Reference circle Ø
57.4 mm
Water tank kit (water tank holder, water tank, hook for transport)
Drive Drive/motor
Petrol
Type
Honda
Power
8.2 kW / 11 HP
Fuel
Lead free
Fuel tank
6.1 l
Engine cooling
Air cooling
Feed
Manual
Blade drive
Via V-belt
Design Manual, cutting depth adjustment via spindle Cutting depth indicator Tool cooling using water fork Left and right hand cutting function Flush corner cut function 25 l water tank
Length
1136 mm
Width
578 mm
Height
1016 mm
Weight
113 kg
FLOOR SAWING
Dimensions & weight
83
Floor saw FSG620 Cutting depths up to 230 mm
Easy handling due to clearly arranged operating elements
Controlled working thanks to digital operating hours counter and reliable petrol gauge
Convenient operation using hydraulic feed drive Excellent cutting performance due to intelligent weight distribution Additional flexibility due to left and right cutting function Problem-free, safe transport using sturdy transport hooks Easy, smooth cutting depth adjustment using precise and protected spindle Maximum safety due to centrally located emergency stop switch and integrated brake Reliable, easy to maintain Honda petrol motor Precise cut guidance by standard cut indicator Optional fresh concrete set
84
Blade guard side change possible with a few manual operations
Technical data
System & Accessories
Saw blade
Floor saw FSG620**
Max. cutting depth
230 mm
Max. saw blade Ø
600 mm
10984041
Floor saw FSG620S
Saw blade speed
2120 rpm
Accessories
Saw blade holder Ø
25.4 mm
10984389
Carrier Ø
11.5 mm
Reference circle Ø
57.4 mm
Green concrete kit with 350 mm blade guard and transformation set (3000 rpm)
Drive Drive/motor
Petrol
Type
Honda
Output
13 kW / 18 HP
Fuel
Lead free
Fuel tank
7.6 l
Engine cooling
Air cooling
Feed
Hydraulic
Blade drive
Via V-belt
Feed speed
0-24 m/min.
Design Manual, stepless cut depth setting via a spindle Tool cooling using water fork Left/right cutting function 28 l water tank
Length
840 mm
Width
580 mm
Height
1,030 mm
Weight
184 kg
FLOOR SAWING
Dimensions & weight
85
Floor saw HFS811 Cutting depths up to 320 mm
guarantees optimum cutting speeds
Easy loading and transportation of the machine by dismantling into individual parts
Maximum mobility due to cleverly devised modular design Optimum suitability for deployment locations that are difficult to access Quick and easy change from left to right cutting Smooth cutting depth adjustment using precise and protected spindle Maximum safety due to centrally located emergency stop switch and integrated brake Precise cut guidance by standard cut indicator
86
Cleverly devised transport system makes the equipment easier to use, particularly indoors
Technical data
System & Accessories
Saw blade
Floor saw HFS811
Max. cutting depth
320 mm
Max. saw blade Ø
800 mm
Saw blade speed
1,250 rpm
Saw blade holder Ø
25.4 mm
Carrier Ø
11.5 mm
Reference circle Ø
57.4 mm
10981255
Floor saw HFS811
Drive Drive/motor
Electric
Output
7.5 kW
Voltage/frequency
400 V / 50 Hz
Engine cooling
Air cooling
Feed
Manual
Blade drive
Via V-belt
Design Manual, stepless cut depth setting via a spindle Cutting depth indicator Tool cooling using flange Left/right cutting function Corner flush cutting function
Length
1,100 mm
Width
600 mm
Height
980 mm
Weight
158 kg
FLOOR SAWING
Dimensions & weight
87
Floor saw FSD930 Cutting depths up to 350 mm
Easy, controlled working thanks to clearly arranged controls
Water regulation for optimum tool cooling, and useful lighting always close by
High productivity and service life due to well-tried and extremely robust design Excellent cutting performance due to intelligent weight distribution Convenient, ergonomic operation using hydraulic feed drive and electro-hydraulic cutting depth adjustment Additional flexibility due to left and right cutting function and corner flush cutting function Problem-free, safe transport using sturdy transport hooks Service-friendly machine design Maximum safety due to centrally located emergency stop switch and integrated brake Precise cut guidance from standard cut indicator at front and rear Optionally with diesel particle filter, fresh concrete set and transformation set
88
Machine is exactly aligned using cut indicator
Technical data
System & Accessories
Saw blade
Floor saw Fsd930**
Max. cutting depth
350 mm
Max. saw blade Ø
900 mm
10984042
Floor saw FSD930S
Saw blade speed
1400 rpm
Accessories
Saw blade holder Ø
25.4 mm
10984390
Carrier Ø
11.5 mm
Reference circle Ø
57.4 mm
Green concrete kit with 450 mm blade guard and transformation set (2300 rpm)
Diesel particle filter and transformation set on request
Drive Drive/motor
Diesel
Type
Deutz
Output
22 kW
Fuel
Diesel
Fuel tank
22.8 l
Engine cooling
Air cooling
Feed
Hydraulic
Blade drive
Via V-belt
Feed speed
0-61 m/min.
Design Electro-hydraulic cutting depth adjustment Cutting depth indicator Tool cooling using water fork Left/right cutting function Corner flush cutting function
Length
1170 mm
Width
820 mm
Height
1250 mm
Weight
655 kg
FLOOR SAWING
Dimensions & weight
89
FLOOR SAW FSD1049 CUTTING DEPTHS UP TO 430 MM
3 speed gear box for ideal blade speeds and optimal blade life
Comprehensive control panel makes handling and monitoring easy
49 HP Deutz diesel fuel efficient engine 3 speed gear box for ideal blade speeds and optimal blade life; no changing of pulleys or belts High productivity and service life due to well-tried and extremely robust design Simple, smooth hydraulic raise / lower system for accurate cutting depth adjustment Convenient, ergonomic operation using hydraulic feed Quick disconnect blade guard for left / right and corner cutting functions Problem free, safe transport with robust lifting hook Maximum power in hard to reach areas; fits through a 900 mm door Enclosed, oil bath bladeshaft minimizes maintenance and keeps belts protected from slurry Narrowest, most powerful floor saw machine in the power range
90
Quick disconnect blade guard for easy cutting in corners and left / right cutting
Technical data
System & Accessories
SAW BLADE
FLOOR SAW FSD1049***
Max. cutting depth
430 mm
Max. saw blade Ø
1000 mm
No Load saw blade speed
2700 / 1800 / 1200 1/min.
ACCESSORIES
Saw blade holder
25.4 mm
10991715
350 mm (14") blade guard
Carrier
11.5 mm
10989833
500 mm (20") blade guard
Reference circle
57.4 mm
10985254
650 mm (26") blade guard
10989836
750 mm (30") blade guard
10989838
900 mm (36") blade guard
Drive Drive/motor
Diesel
Type
Deutz
Output
36.5 kW / 49 HP
Fuel
Diesel
Fuel tank
34.2 l
Engine cooling
Air
Feed
Hydrostatic
Blade drive
Via V-Belt
Feed speed
0-61 m/min
10986900
Floor Saw FSD1049*** 3 Speed (1000 mm guard)
Diesel particle filter on request
DESIGN Electro-hydraulic cutting depth adjustment Cutting depth indicator Tool cooling using water fork Left / right cutting function 3 speed gearbox
Length
1450 mm
Width
980 mm
Height
1250 mm
Weight
775 kg
FLOOR SAWING
DIMENSIONS & WEIGHT
91
Floor saw HFS1030RC Cutting depths up to 420 mm
Simple to control using remote control
Increased safety aspect due to power connection with water spray protection
Wide range of uses and problem-free transport due to intelligent compact design Convenient operation thanks to electric feed and electric cutting depth adjustment (using remote control) Quick and easy change from left to right cutting Service-friendly machine design Maximum safety due to centrally located emergency stop switch and integrated brake Precise cut guidance by standard cut indicator
92
Universal blade guard provides completely clean cutting right into corners
Technical data
System & Accessories
Saw blade
Floor saw hfs1030Rc
Max. cutting depth
420 mm (520 mm)
Max. saw blade Ø
1,000 mm (1,200 mm)
10981256
Floor saw HFS1030RC
Saw blade speed
700-2,700 rpm
Accessories
Saw blade holder Ø
25.4 mm
10978988
Carrier Ø
11.5 mm
Reference circle Ø
57.4 mm
Protection cover for blade Ø 1200 mm
Drive Drive/motor
Electrical (frequency converter)
Output
22 kW
Voltage
400 V / 50 Hz
Cooling
Air cooling
Feed
Electric
Blade drive
Via V-belt
Feed speed
0-33 m/min.
Design Electric cutting depth adjustment Cutting depth indicator Tool cooling using flange Left/right cutting function Corner flush cutting function Remote control
Length
1,180 mm
Width
720 mm
Height
960 mm
Weight
480 kg
FLOOR SAWING
Dimensions & weight
93
Floor saw FSE1240 Cutting depths up to 480 mm
Building site compatible, well thought-out design with protected electrical components
Continuous control and monitoring facility thanks to precise displays
High productivity and service life due to well-tried and extremely robust design Excellent cutting performance due to intelligent weight distribution Convenient, ergonomic operation using hydraulic feed drive and electrohydraulic cutting depth adjustment Additional flexibility due to left and right cutting function and flush cutting function for corners Problem-free, safe transport using sturdy transport hooks Service work minimised thanks to protected electrical components Maximum safety due to centrally located emergency stop switch and integrated brake Precise cut guidance from standard cut indicator at front and rear With optional transformation set
94
Simple handling due to logically arranged operating elements
Technical data
System & Accessories
Saw blade
Floor saw fse1240**
Max. cutting depth
480 mm
Max. saw blade Ø
1200 mm
Saw blade speed
1075 rpm
Saw blade holder Ø
25.4 mm
Carrier Ø
11.5 mm
Reference circle Ø
57.4 mm
10984045
Floor saw FSE1240S
Tranformation set on request
Drive Drive/motor
Electric
Output
30 kW
Voltage/frequency
400 V / 50 Hz
Engine cooling
Air cooling
Feed
Hydraulic
Blade drive
Via V-belt
Feed speed
0-61 m/min.
Design Electro-hydraulic cutting depth adjustment Cutting depth indicator Tool cooling using water fork Left/right cutting function Corner flush cutting function
Length
1,700 mm
Width
870 mm
Height
1,160 mm
Weight
840 kg
FLOOR SAWING
Dimensions & weight
95
Floor saw FSD1274 Cutting depths up to 480 mm
Inline engine with right angle, direct drive gear box for greater power transfer to blade shaft
Blade clutch and neutral position for added safety
Inline 74 HP Kubota turbo diesel fuel efficient engine Low maintenance oil bath blade shaft does not expose belts to slurry and has no grease points Electro-mechanical cutting depth stop, optimizes blade life Automatic water shut-off, conserves water and eases operation Dual motor hydraulic drive system with no belts or chains to adjust Blade clutch provides for extra safety when moving saw Patent pending hydraulic handle adjustment, improves maneuverability and reduces operator fatigue Narrowest floor saw machine in the power range
96
Patent pending hydraulic handle adjustment provides better control and less fatigue
Technical data
System & Accessories
Saw blade
Standard
Maximal
Floor Saw fsD1274***
Max. cutting depth
230 mm
480 mm
10985200
Max. saw blade Ø
600 mm
1200 mm
Saw blade speed
1590 1/min
880 1/min
Saw blade holder Ø
25,4 mm
Carrier Ø
11,5 mm
Reference circle Ø
57,4 mm
accessories 10990243
Green concrete kit with 500 mm blade guard and transformation set (2100 1/min) Max. saw blade Ø 500 mm
10990244
900 mm blade guard and transformation set (1165 1/min) Max. saw blade Ø 900mm
10990245
1200 mm blade guard and transformation set (880 1/min) Max. saw blade Ø 1200mm
Drive Drive/motor
Diesel
Type
Kubota
Output
55 kW / 74 HP
Fuel
Diesel
Fuel tank
34,2 l
Engine cooling
water cooling
Feed
Hydraulic
Blade drive
directly flange-mounted angular gear
Feed speed
0-76 m/min
Floor saw FSD1274*** (Standard configuration)
Diesel particle filter on request
Design Electro-hydraulic cutting depth adjustment Electro-mechanical cutting depth stop Hydraulic adjustable handles Blade clutch Tool cooling using water fork Left/right cutting function Standard
Length
1615 mm
Width
927 mm
Height
1335 mm
Weight
937 kg
Maximal
FLOOR SAWING
Dimensions & weight
1010 kg
97
FLOOR SAW FSD1274 3 SPEEDS CUTTING DEPTHS UP TO 480 MM
3 speed gear box for ideal blade speeds and optimal blade life
Neutral gear position provides for extra safety when moving saw
3 speed gear box for ideal blade speeds and optimal blade life; no changing of pulleys or belts Engine cover, for increased safety, noise reduction and easier maintenance Inline 74 HP Kubota turbo diesel fuel efficient engine Low maintenance oil bath blade shaft does not expose belts to slurry and has no grease points Right angle, water-cooled, direct drive gear box for greater power transfer to blade shaft Electro-mechanical cutting depth stop, optimizes blade life Automatic water shut-off, conserves water and eases operation Dual motor hydraulic drive system with no belts or chains to adjust Narrowest floor saw machine in the power range Patent pending hydraulic handle adjustment, improves maneuverability and reduces operator fatigue
98
Patent pending hydraulic handle adjustment provides better control and less fatigue
Technical data
System & Accessories
SAW BLADE
FLOOR SAW FSD1274***
Max. cutting depth
480 mm
Max. saw blade Ø
1200 mm
10989900
Floor Saw FSD1274*** 3 Speed (1200 mm guard)
No Load saw blade speed
1700 / 1250 / 975 1/min.
ACCESSORIES
Saw blade holder Ø
25,4 mm
10985254
650 mm (26") blade guard
Carrier Ø
11,5 mm
10989836
750 mm (30") blade guard
Reference circle Ø
57,4 mm
10989838
900 mm (36") blade guard 1000 mm (42") blade guard
Drive
1200 mm (48") blade guard
Drive/motor
Diesel
Type
Kubota
Output
55 kW / 74 HP
Fuel
Diesel
Fuel tank
34,2 l
Engine cooling
water cooling
Feed
Hydraulic
Blade drive
directly flange-mounted
Feed speed
0-76 m/min
Diesel particle filter on request
DESIGN Electro-hydraulic cutting depth adjustment Electro-mechanical cutting depth stop Hydraulic adjustable handles Left/right cutting function Tool cooling using water fork Engine cover 3 speed gear box with neutral position
Length
1620 mm
Width
927 mm
Height
1420 mm
Weight
990 kg
FLOOR SAWING
DIMENSIONS & WEIGHT
99
Floor Grinding
Floor Grinder FGE270 1-phase, Max. Grinding width 270 mm
Plug and play – connect machine to power supply and start grinding immediately
Trouble-free transportation due to detachable machine parts – no tools needed
Increased productivity and grinding performance due to single-head grinding principle Easy handling thanks to ergonomic control elements, fixed speed as well as low noise and vibration levels Fatigue-proof working and reduction of side forces because of outstanding machine balance Maximum durability and load capacity due to very robust construction Impressive mobility as well as trouble-free transportation thanks to detachable machine parts Timesaving patented quick tool fixing system Dust-free operation because of floating cover in combination with reliable dust collection system
102
Technical data
System & Accessories Floor Grinder FGE270***
Max. grinding width
270 mm
10990281
Floor Grinder FGE270*** 230 V (50 Hz)
Grinding disc width
1 x 270 mm
10990282
Floor Grinder FGE270*** 110 V (60 Hz)
Grinding disc speed
960 1/min
10991272
Floor Grinder FGE270*** 230 V (60 Hz)
Grinding pressure
34 kg
10990811
Floor Grinder FGE270*** Edge-Kit attached 230 V (50 Hz)
Design
accessories
1 Grinding head Direct drive Detachable machine parts Drive Drive/motor
Electric
Type
1-phase
Power
1,5 kW
Voltage / Frequency
230 V / 50 Hz
Voltage / Frequency optional
110 V / 60 Hz | 230 V / 60 Hz
Current
8,3 A
Current optional
17.5 A | 8,3 A
10990287
Dust collection system VCE2600D*** 230 V (50-60 Hz)
10990288
Dust collection system VCE2600D*** 110 V (60 Hz)
10990296
Edge Kit
Tools 10991635
Set-heavy removal GT0*** (9 x single segment)
10991312
Set-removal GT1*** (9 x single segment)
10991313
Set-removal GT1*** (9 x double segment)
10991314
Set-rough grinding GT2*** (9 x single segment)
10991315
Set-rough grinding GT2*** (9 x double segment)
10991316
Set-smooth grinding GT3*** (9 x single segment)
10991317
Set-smooth grinding GT3*** (9 x double segment)
Length
517 mm
Width
370 mm
Height
1245 mm
Weight
53 kg
Weight grinding head
37 kg
FLOOR GRINDING
Dimensions & weight
103
Floor Grinder FGE400 3-phases, Max. Grinding width 400 mm
The single grinding head principle guarantees an outstanding grinding performance
Dust-free operation via intelligent collection system
Increased productivity and grinding performance due to single-head grinding principle Easy handling thanks to ergonomic control elements, fixed speed as well as low noise and vibration levels Fatigue-proof working and reduction of side forces because of outstanding machine balance Maximum durability and load capacity due to very robust construction Impressive mobility as well as trouble-free transportation thanks to detachable machine parts Timesaving patented quick tool fixing system Dust-free operation because of floating cover in combination with reliable dust collection system
104
Reduction of service and maintenance thanks to robust components and protected belts
Technical data
System & Accessories Floor Grinder FGE400***
Max. grinding width
400 mm
Grinding disc width
1 x 400 mm
Grinding disc speed
1430 1/min
accessories
Grinding pressure
47 kg
10990289
10990283
Floor Grinder FGE400*** 400 V (50 Hz)
Dust collection system VCE4000D*** 400 V (50 Hz)
Design
tools
1 Grinding head
10991635
Set-heavy removal GT0*** (9 x single segment)
Direct drive
10991312
Set-removal GT1*** (9 x single segment)
Detachable machine parts
10991313
Set-removal GT1*** (9 x double segment)
10991314
Set-rough grinding GT2*** (9 x single segment)
10991315
Set-rough grinding GT2*** (9 x double segment)
Drive Drive/motor
Electric
10991316
Set-smooth grinding GT3*** (9 x single segment)
Type
3-phase
10991317
Set-smooth grinding GT3*** (9 x double segment)
Power
4 kW
Voltage / Frequency
400 V / 50 Hz
Current
8,2 A
Length
685 mm
Width
480 mm
Height
1300 mm
Weight
78 kg
Weight grinding head
50 kg
FLOOR GRINDING
Dimensions & Weight
105
Floor grinder FGE450 1-phase, Max. Grinding width 450 mm
3 grinding discs and 1 counter rotating grinding head guarantee a smooth grinding result
The floating cover simplifies the handling and improves the dust collection
Perfectly smooth and economical grinding results thanks to planetary drive system Easy handling thanks to ergonomic control elements, fixed speed as well as low noise and vibration levels Fatigue-proof working and reduction of side forces because of outstanding machine balance Maximum durability and load capacity due to very robust construction Impressive mobility as well as trouble-free transportation thanks to detachable machine parts Timesaving patented quick tool fixing system Dust-free operation because of floating cover in combination with reliable dust collection system
106
Ergonomic designed and adjustable control elements
Technical data
System & Accessories Floor Grinder FGE450***
Max. grinding width
450 mm
10990284
Floor Grinder FGE450*** 230 V (50 Hz)
Grinding disc width
3 x 180 mm
10990285
Floor Grinder FGE450*** 110 V (60 Hz)
Grinding disc speed
480 1/min
10991273
Floor Grinder FGE450*** 230 V (60 Hz)
Grinding pressure
63 kg accessories
Design
10990287
Dust collection system VCE2600D*** 230 V (50-60 Hz)
3 Grinding discs
10990288
Dust collection system VCE2600D*** 110 V (60 Hz)
Planetery drive system (belt) tools
Detachable machine parts Drive
10991635
Set-heavy removal GT0*** (9 x single segment)
10991312
Set-removal GT1*** (9 x single segment)
Drive/motor
Electric
10991313
Set-removal GT1*** (9 x double segment)
Type
1-phase
10991314
Set-rough grinding GT2*** (9 x single segment)
Power
1,5 kW
10991315
Set-rough grinding GT2*** (9 x double segment)
Voltage / Frequency
230 V / 50 Hz
10991316
Set-smooth grinding GT3*** (9 x single segment)
Voltage / Frequency optional
110 V / 60 Hz | 230 V 60 Hz
10991317
Set-smooth grinding GT3*** (9 x double segment)
Current
8,3 A
Current optional
17,5 A | 8,3 A
Length
705 mm
Width
490 mm
Height
1305 mm
Weight
95 kg
Weight grinding head
68 kg
FLOOR GRINDING
Dimensions & weight
107
Floor grinder FGE530 3-phases, Max. Grinding width 530 mm
High load capacity thanks to robust design
The powerful motor allows the efficient processing of larger areas
Perfectly smooth and economical grinding results thanks to planetary drive system Easy handling thanks to ergonomic control elements, fixed speed as well as low noise and vibration levels Fatigue-proof working and reduction of side forces because of outstanding machine balance Maximum durability and load capacity due to very robust construction Impressive mobility as well as trouble-free transportation thanks to detachable machine parts Timesaving patented quick tool fixing system Dust-free operation because of floating cover in combination with reliable dust collection system
108
Time-saving, easy and secure change of tools due to patented tool quick fixing system
Technical data
System & Accessories Floor Grinder FGE530***
Max. grinding width
530 mm
Grinding disc width
3 x 230 mm
Grinding disc speed
715 1/min
accessories
Grinding pressure
94,7 kg
10990289
10990286
Floor Grinder FGE530*** 400 V (50 Hz)
Dust collection system VCE4000D*** 400 V (50 Hz)
Design
tools
3 Grinding discs
10991635
Set-heavy removal GT0*** (9 x single segment)
Planetery drive system (belt)
10991312
Set-removal GT1*** (9 x single segment)
Detachable machine parts
10991313
Set-removal GT1*** (9 x double segment)
10991314
Set-rough grinding GT2*** (9 x single segment)
10991315
Set-rough grinding GT2*** (9 x double segment)
Drive Drive/motor
Electric
10991316
Set-smooth grinding GT3*** (9 x single segment)
Type
3-phase
10991317
Set-smooth grinding GT3*** (9 x double segment)
Power
4 kW
Voltage / Frequency
400 V / 50 Hz
Current
8,2 A
Length
790 mm
Width
570 mm
Height
1310 mm
Weight
131 kg
Weight grinding head
102 kg
FLOOR GRINDING
Dimensions & weight
109
Dust collection system VCE2500D 1-phase, Power 2,2 kW
Optimized for dry grinding, but also excellent in other applications with dust extraction Convincing performance thanks to powerful throughput and reliable HEPA 13 filter system Robust and sturdy construction provides high quality and great reliability Simple, user-friendly handling due to easy accessible control elements, low noise level and antistatic hose Intelligent change of dust bags via proven “Longopack” system Trouble-free transportation because of compact lightweight design and adjustable height
110
Technical data
System & Accessories DUST COLLECTION SYSTEM VCE2500D***
Power
2.2 kW
10992803
Dust collection system VCE2500D*** 230V
Voltage / Frequency
230 V / 50 Hz (110 V / 60 Hz)
10992804
Dust collection system VCE2500D*** 110V
Current
9.2 A (18.4 A)
Max. theoretical air flow
375 m3/h (345 m3/h)
Application
Dry
Length
840 mm
Width
585 mm
Height
1180–1575 mm
Weight
56 kg
FLOOR GRINDING
DIMENTIONS & WEIGHT
111
Dust collection system VCE4000D 3-phases, Power 4 kW
Convincing performance thanks to powerful throughput and reliable filter system Simple, user-friendly handling due to easy accessible control elements, low noise level and antistatic hose Intelligent change of dust bags via proven longopack system Trouble-free transportation because of innovative height adjustment system and compact lightweight design Additional capability of connection, to drain off harmful emissions
112
Technical data
System & Accessories Dust collection system VCE4000D***
Power
4 kW
Voltage / Frequency
370 - 415 V / 50 Hz
Current
9A
Max. theoretical air flow
420 m3/h
Application
dry
10990289
Dust collection system VCE4000D*** 400V
Length
1065 mm
Width
720 mm
Height
1540 mm
Weight
169 kg
FLOOR GRINDING
Dimensions & Weight
113
Ring Sawing
RING SAW HRH500 CUTTING DEPTHS UP TO 400 MM
Excellent power transfer to blade and no slippage due to a patent pending self torque, anti-slip, drive roller system
Uniquely cuts up to 400 mm deep
One of a kind hydraulic hand saw, cuts through 400 mm walls or floors Prevents over cuts, eliminates corner drilling, no need for diamond chain Greater productivity and easy set up, much faster than diamond chain sawing Economical alternative to diamond chain saws because of significantly increased diamond tool life Saves costs due to low maintenance and minimal wear parts Excellent power transfer to blade and no slippage due to a patent pending self torque, anti-slip, drive roller system Optional volume splitter available for use with almost any hydraulic power pack
116
Optional volume splitter for use with high pressure hydraulic power units
Technical data
System & Accessories
Saw blade
RING SAW HRH500***
Max. cutting depth
400 mm
Max. saw blade Ø
500 mm
10991469
Ring Saw HRH50***
accessories Drive
10991989
Flow-volume splitter (30 l/min., 170 bar)
Drive/motor
Hydraulic
10991881
Hydraulic seal / bearing rebuild kit
Type
Gear motor
10992895
Upper drive roller
Max. flow
30 l/min.
10991813
Lower drive roller
Max. pressure
172.5 bar
Length
660 mm
Width
260 mm
Height
483 mm
Weight
12.6 kg
Ring SAWING
Dimensions & weight
117
RING SAW HRG500 CUTTING DEPTHS UP TO 400 MM
Excellent power transfer to blade and no slippage due to a patent pending self torque, anti-slip, drive roller system
Uniquely cuts up to 400 mm deep
One of a kind gas hand saw, cuts through 400 mm walls or floors Reliable Dolmar 64 cc, 2 stroke petrol engine Prevents over cuts, eliminates corner drilling, no need for diamond chain Greater productivity and easy set up, much faster than diamond chain sawing Economical alternative to diamond chain saws because of significantly increased diamond tool life Saves costs due to low maintenance and minimal wear parts Excellent power transfer to blade and no slippage due to a patent pending self torque, anti-slip, drive roller system
118
Reliable Dolmar petrol engine
Technical data
System & Accessories
Saw blade
RING SAW HRG500***
Max. cutting depth
400 mm
Max. saw blade Ø
500 mm
10991778
Ring Saw HRG500***
accessories Drive Drive/motor
Petrol, 2 stroke
Type
Dolmar 6400
Power
4.8 HP
Displacement
64 cc
10992895
Upper drive roller
10991813
Lower drive roller
Length
640 mm
Width
260 mm
Height
510 mm
Weight
13.5 kg
Ring SAWING
Dimensions & weight
119
Pressing and Crushing
Press tool CP-110 / BTH350 Pressing force of 110 and 260 tons
Special hose and connection system provide safety
Pressure plates provide even pressure distribution and stroke extension
Suitable for controlled, large-volume break-up of reinforced concrete Concrete dismantling without water, noise, dust and vibration Maximum force with maximum mobility
122
System & Accessories Cp-110
BTH350***
CP-110
Pressing force
108 tons
260 tons
975756
Number of pistons
3
2
Stroke
24 mm
50 mm
BTH350***
Required core bore hole Ø (with pressure plate)
130 mm
200 mm
10986983
Required core bore hole Ø (without pressure plate)
110 mm
Not recommended
Hydraulic hoses
Weight
15 kg
36 kg
Connecting lines
2 off (short / straight)
2 off (long / curved)
High-pressure connection
Screw version
Burster head CP-110 with screw connection
Burster head BTH350P
975604
HP-hose 5 m screwed
975608
Low pressure hose 5 m
Concrete press system accessories 973886
Male coupling for LP-hose
979401
Cap Ø 20mm LP-hose
970285
Double fitting for HP-hose
980397
Cup 1/4" HP-hose
970301
HP-pipe short straight CP/SP
970303
HP-pipe long straight CP/SP
971383
HP-pipe long bended SP
970271
Pressure plate
978272
Pressure plate CP-110 250 mm
CRUSHER
Technical data
123
Drive unit au Working pressure up to 2000 bar
User friendly thanks to clear control and operating elements
Accessories: Distribution head for 8 press tools
Suitable for press tools CP110 and BTH350*** Pressing force of up to 2100 tons Robust due to compact design
124
Two separately controllable outputs for controlled pressing work
Technical data
System & Accessories
Hydraulics
Drive unit au
Press force
0,5 l / min at 2000 bar
975754 *
High pressure drive unit AU 400/50 EU
Low pressure
2.4 l / min at 150 bar
975761
Tool box
Booster pressure
14.4 l / min at 80 bar
Oil tank capacity
13 litres
Motor
Accessories 973071
El.-plug CEE 16/5pol.
974045
4-way HP adaptor unit
Electric motor
Air-cooled
960827
2 way inlet connection
Voltage
200 V / 230 V / 380 V / 400 V / 460 V
970300
Adaptor M24-G1/4" for SP
Current (400 V / 50 Hz)
10 A
974053
Return nipple complete CP/SP
Frequency
50 Hz / 60 Hz
974054
Screw nipple complete CP/SP
Output
2.2 kW
974050
Screwing set CP/SP
Connections
* Different voltage types are available upon request.
High pressure
2 off (optionally 8 pcs.)
Low pressure
4 off (optionally 8 pcs.)
Length
750 mm
Width
560 mm
Height
755 mm
Weight
127 kg
CRUSHER
Dimensions & weight
125
Crusher bz For wall thicknesses of 120 to 300 mm
Spacer rings (25 and 50 mm) for different wall thicknesses
Different pressure heads as accessories
Simple, safe operation
Crushing force 30 tons Concrete dismantling without water, noise, dust and vibration Light weight due to high-strength aluminium body
126
Technical data
System & Accessories
Crusher bz
Crusher bz
Crushing force
30 tons
975197
Crusher BZ
Wall thicknesses
120 - 300 mm
975728
Tool box BZ
Accessories
Length
530 mm
977522
Steel point BZ
Width
290 mm
974203
Special head BZ for stair removal
Height
910 mm
974204
Pressure head BZ for min.; thickness <150mm
Weight
47 kg
970632
Distance washer 50mm
970630
Distance washer 25 mm
CRUSHER
Dimensions & weight
127
Drive unit BW-2 Working pressure up to 750 bar
Easy transport due to detachable motor
Suitable for crusher BZ Small, handy and light due to detachable main motor Easy to use thanks to intuitive operation
128
Technical data
System & Accessories
Hydraulics
Drive unit Bw-2
Hydraulic power
7.4 l / min at 750 bar
Oil cooling
Oil / water heat exchanger
Oil tank capacity
6 litres
975698 *
High pressure drive unit BW-2 400/50 EU
Accessories 973071
El.-plug CEE 16/5pol.
Motor Motor
Water-cooled electric motor
Voltage
200 V / 230 V / 380 V / 400 V / 460 V
Current (400 V / 50 Hz)
16 A
Frequency
50 Hz / 60 Hz
Output
10 kW
* Different voltage types are available upon request.
Length
800 mm
Width
510 mm
Height
1,050 mm
Weight with motor
64 kg
Weight without motor
34 kg
CRUSHER
Dimensions & weight
129
Table Sawing
Tile saw TTE250 Cutting depths up to 60 mm
Innovative telescopic system makes long cut lengths possible (up to 730 mm)
Required cutting depth is quick and easy to set additional deployment options due to cap cutting function
Long cutting lengths with short overall saw length Clean cutting thanks to precise saw table guidance Practical handling and problem-free transport due to compact design and lightweight construction Simple to clean due to detachable water tank made from high-quality, robust plastic Maximum safety due to centrally located emergency stop switch High flexibility due to many adjusting and usage options
132
Precise angle and mitre cutting using included stops
Technical data
System & Accessories
Saw blade
Tile saw TTE250***
Max. cutting depth
60 mm
10983906
Tile saw TTE250P / 230 V
Max. saw blade Ø
250 mm
10984480
Tile saw TTE250P / 110 V
Cutting length
730 mm
Saw blade speed
3,420 rpm
Accessories
Saw blade holder Ø
25.4 mm
10984479
Fold-up saw table
10985921
Table extension arm
10988374
Mitre stop (Jolly table) for 600 mm tiles
Drive Drive / motor
Electric
Output
1.1 kW
Standard voltage/frequency
230 V / 50 Hz
Optional voltage/frequency
110 V / 60 Hz
Engine cooling
Air cooling
Saw blade drive
Direct
Design Infinitely adjustable cutting depths Angle cutting function (angle stop) Mitre cutting function (mitre stop) Cap cutting function Included table extension Plastic water tank (detachable) Electric water pump Dismantlable
Length
900 mm
Width
600 mm
Height
500 mm
Weight
26 kg
TABLE SAWING
Dimensions & weight
133
Masonry saw TBE350 Cutting depths up to 110 mm
Swivelling saw head allows 45° mitre cuts to be made
Two robust castors provide optimum manoeuvrability at the deployment location
Uncompromising price/performance ratio Clean cutting thanks to solid saw table with non-slip surface Mitre cuts are child's play to make using the swivelling saw head Continuous tool cooling and minimal amount of service work due to water pump location that prevents soiling Problem-free transport thanks to removable table feet Maximum safety due to centrally located emergency stop switch High flexibility due to many adjusting and usage options
134
Included angle stop for cuts from 30° to 90°
Technical data
System
Saw blade
Masonry saw TBE350**
Max. cutting depth
110 mm
10981423
Masonry saw TBE350S / 230 V
Max. saw blade Ø
350 mm
10981424
Masonry saw TBE350S / 110 V
Cutting length
600 mm
Saw blade speed
2,800 rpm
Saw blade holder Ø
25.4 mm
Drive Drive / motor
Electric
Output
2.2 kW
Standard voltage/frequency
230 V / 50 Hz
Optional voltage/frequency
110 V / 60 Hz
Engine cooling
Air cooling
Saw blade drive
Direct
Design Infinitely adjustable cutting depths Angle cutting function (angle stop) Mitre cutting function (swivelling saw head) Cap cutting function Water tank made from powder-coated steel Electric water pump Dismantlable
Length
1,140 mm
Width
640 mm
Height
1,230 mm
Weight
79 kg
TABLE SAWING
Dimensions & weight
135
Masonry saw TME650 Cutting depths up to 270 mm
Pull-out water tank makes cleaning work easier
Stable, balanced transportation hook makes problem-free crane transport possible
Maximum stability and loadability due to torsionally strong steel chassis Clean cuts thanks to precise saw table guide made from stainless steel Continuous tool cooling and minimal amount of service work due to water pump location that prevents soiling Problem-free, safe transport thanks to central crane hook and fork lift guides Simple positioning of machine at deployment location using building site-compatible steering roller Quick and easy blade installation using intelligent blade guard construction Cleaning is simple due to pull-out, robust water tank Maximum safety due to centrally located emergency stop switch High flexibility due to many adjusting and usage options
136
Precise mitre cuts thanks to mitre stop
Technical data
System & Accessories
Saw blade
Masonry saw tme650***
Max. cutting depth
270 mm
Max. saw blade Ø
700 mm
10987200
Masonry saw TME650P / 400 V
Cutting length
600 mm
Accessories
Saw blade speed
1,400 rpm
10978735
Saw blade holder Ø
60 mm
Carrier Ø
11.5 mm
Reference circle Ø
120 mm
Mitre stop (Jolly table)
Drive Drive / motor
Electric
Output
5.5 kW
Voltage/frequency
400 V / 50 Hz
Engine cooling
Air cooling
Saw blade drive
Direct
Design Infinitely adjustable cutting depths Angle cutting function (angle stop) Mitre cutting function (optional mitre stop) Transport hook and fork lift guides Pull-out steel water tank Electric water pump
Length
1,470 mm
Width
910 mm
Height
1,350 mm
Weight
215 kg
TABLE SAWING
Dimensions & weight
137
Masonry saw TME900 Cutting depths up to 380 mm
Large cutting depths of up to 380 mm possible (with saw blade Ø 1,000 mm)
Precise mitre cuts thanks to mitre stop
Maximum stability and loadability due to torsionally strong steel chassis Clean cuts thanks to precise saw table guide made from stainless steel Continuous tool cooling due to water pump location that prevents soiling Service work minimised by low-maintenance saw blade drive via a gearbox Problem-free, safe transport thanks to central crane hook and fork lift guides Simple positioning of machine at deployment location using building site-compatible steering roller Quick and easy blade installation using intelligent blade guard construction Cleaning is simple due to pull-out, robust water tank Maximum safety due to centrally located emergency stop switch High flexibility due to many adjusting and usage options
138
Forklift truck guides for simple and safe transport
Technical data
System & Accessories
Saw blade
Masonry saw TME900***
Max. cutting depth
380 mm
Max. saw blade Ø
1,000 mm
10987300
Masonry saw TME900P / 400 V
Cutting length
660 mm
Accessories
Saw blade speed
910 rpm
10978735
Saw blade holder Ø
60 mm
Carrier Ø
11.5 mm
Reference circle Ø
120 mm
Mitre stop (Jolly table)
Drive Drive / motor
Electric
Output
7.5 kW
Voltage/frequency
400 V / 50 Hz
Engine cooling
Air cooling
Saw blade drive
Via gears
Design Infinitely adjustable cutting depths Angle cutting function (angle stop) Mitre cutting function (optional mitre stop) Transport hook and fork lift guides Plastic water tank (pull-out) Electric water pump
Length
1,800 mm
Width
1,030 mm
Height
1,500 mm
Weight
324 kg
TABLE SAWING
Dimensions & weight
139
Our worldwide subsidiary companies can be found on our website at www.tyrolit.com
www.tyrolit.com
20048313-GB-0514
Tyrolit Schleifmittelwerke SWAROVSKI K.G. Swarovskistraße 33 | 6130 Schwaz | Austria Tel +43 5242 606-0 | Fax +43 5242 63398