Precision Lapping & Polishing Machines
MULTIPOL 8 and 10 are versatile lapping and polishing systems capable of preparing the most demanding specimens required by Research and Industry. Primarily designed for failure analysis, research and pilot-scale production applications, they allow for many methods of sample holding - producing a high versatility which is extended by the availability of a range of accessories and polishing plates. Optical Standards of finish can be achieved with the use of the system’s reciprocating sweep mechanism. This control allows maintenance of surface parallelism and flatness. Sample loading is fully variable, as are the sweep and rotation speeds.
All parts that come into contact with polishing media are produced from either stainless steel or heavy duty plastic and are quickly detachable for ease of cleaning and avoiding cross contamination. A spindle lock allows plates to be changed conveniently. The fully-controllable reciprocating arm mechanism allows maintenance of plate flatness. This means that samples of the highest optical standards of flatness and parallelism may be prepared.
Product Highlights
m The exceptional degree of control which is available for all preparation parameters means that MULTIPOL's may be configured for hard, soft, and friable materials, and suits preparations of expensive and unique research materials.
Versatility – all polishing methods can be used including, abrasive, diamond, slurry, CMP and etch polishing
Optical Quality Polishing
m
Easy to clean - All parts which could cause cause contamination can be easily detached. This means downtime is minimized.
All lapping and polishing techniques can be accommodated
m
Tight control of all process variables allows superior performance on most materials
Bench-top and quiet in operation
Precision jig mounted on 6183.M ULTRACOLLIMATOR allows for the production of extremely parallel sided samples
1025 E. Chestnut Ave., Santa Ana, CA 92701 T: 1.714.542.0608 F: 1.714.542.0627 Toll Free (US): 1 877 542 0609
www.ultratecusa.com
Precision Lapping & Polishing Machines
Product Specifications System Part #
6108.1 – MULTIPOL 8 6110.1 – MULTIPOL 10 0 to 90 rpm Variable +/- 8 degrees 21 inches (53cm) wide x 18 inches (46cm) deep x 8 Inches (20cm) high 40 kg (100 lbs) 110 to 240V, 50 to 60 Hz
Spindle Speed Sweep Stroke Footprint Unit Weight Electrical
Key Accessories 6166.2 6166.3 6166.4 6158.1 6230.1
Precision Polishing Jig Kit for maximum 2 inch diameter samples (see separate datasheet) Precision Polishing Jig Kit for maximum 3 inch diameter samples Precision Polishing Jig Kit for maximum 4 inch diameter samples Recirculating slurry pump Slurry containment tray
Lapping & Polishing Plates Order Code
Diameter
Surface
Application
6191.8 6191.1
8 inch 10 inch
Cast Iron scrolled
Initial lapping with loose abrasives, polishing very hard materials
6193.8 6193.1
8 inch 10 inch
Copper-faced scrolled
Polishing hard materials
6195.8 6195.1
8 inch 10 inch
Solder-faced scrolled
Polishing medium-hard materials
6197.8 6197.1
8 inch 10 inch
Cast-iron plain
Preparing brittle and very small samples
6199.8 6199.1
8 inch 10 inch
Stainless steel plain
General purpose, covered with films, cloths, papers and pads
6206.8 6206.1
8 inch 10 inch
Polyurethane-faced plain
Polishing with slurries, used in CMP processes with colloidal silica and alumina suspensions
represented in your area by:
1025 E. Chestnut Ave., Santa Ana, CA 92701 T: 1.714.542.0608 F: 1.714.542.0627 Toll Free (US): 1 877 542 0609 ULTRA TEC is proud to operate a continuous product improvement program. Product specification and appearance are subject to modification without prior notification.
www.ultratecusa.com