CAD TRAINING: SOLIDWORKS BASIC
TRAINING COURSE
COURSE DESCRIPTION
This course provides free SolidWorks basic training by teaching essential computer-aided design (CAD) design skills through engaging lessons and hands-on activities to empower participants to create high-quality designs. It is suitable for beginners and those looking to enhance their skills in SolidWorks.
COURSE OUTLINE & LEARNING OBJECTIVES
INTRODUCTION TO SOLIDWORKS AND CAD HISTORY
• Provide an overview of SolidWorks software and its significance in the realm of CAD
• Explore the historical evolution of CAD technology
UNDERSTANDING SOLIDWORKS FEATURES AND USER INTERFACE
• Familiarise participants with the key features of SolidWorks modelling
• Differentiate between sketch and applied features within SolidWorks
• Identify principal components of the SolidWorks user interface
INTRODUCTION TO 3D MODELLING
• Enable participants to create new parts in SolidWorks
• Instruct on inserting sketches and adding geometry within the software
• Establish an understanding of sketch relations and the state of sketches
• Guide participants in extruding sketches into solid 3D models
BASIC PART MODELLING TECHNIQUES
• Instruct participants on selecting the best profiles for sketching
• Familiarise participants with editing tools for sketches and features, including rollback operations
• Instruct on generating basic 2D drawings from 3D parts
• Facilitate understanding of dimension adjustments and the associativity between 3D models and drawings
CERTIFICATION
Upon successful completion of the SolidWorks basic training course, participants will be awarded a certificate of completion, recognising their dedication to enhancing their proficiency in SolidWorks software and advancing their career in engineering design and modelling.
COURSE REQUIREMENTS
Basic knowledge of Windows operating system
DURATION
12 hours
TRAINING
COST Free CONTACT
TRAINING BOOKING ENQUIRIES
Victoria Bayliss
ECMS Administrator
Elite Centre for ManufacturingSkills
Email: victoria.bayliss@wlv.ac.uk
Tel: 01902 321 678
Visit: www.theecms.co.uk
COURSE RELATED ENQUIRIES
Dr. Manpreet Singh
PhD | M.Sc | FHEA | B.Eng. (Hons)
ECMS Knowledge Exchange Trainer
Elite Centre for ManufacturingSkills
Email: m.singh208@wlv.ac.uk
Tel: 01902 321 908
Visit: www.theecms.co.uk
CAD TRAINING: SOLIDWORKS FUNDAMENTAL
TRAINING COURSE
Master the art of 3D design with SolidWorks
COURSE DESCRIPTION
This course provides a fundamental understanding of SolidWorks and a transformative journey into the realm of precision engineering and innovative design. Whether you’re an aspiring computer-aided design (CAD) professional or an industry veteran seeking to enhance your skills, this course is your gateway to excellence.
COURSE OVERVIEW
FOUNDATIONS OF SOLIDWORKS
Establish a solid foundation by familiarising yourself with the software’s interface, navigation and essential features. Develop proficiency in navigating the design environment.
PARAMETRIC MODELLING MASTERY
Explore in-depth parametric modelling principles. Acquire proficiency in constructing resilient 3D components utilising features such as extrusions, fillets and chamfers. Uncover the significance of design intent.
ASSEMBLIES UNLEASHED
Assemble complex components seamlessly. Explore mates, constraints and assembly techniques. Bring your designs to life by combining individual parts into functional units.
2D DRAWINGS WITH PRECISION
Translate your 3D models into detailed 2D drawings. Master annotations, dimensions and tolerances. Ensure your designs are production-ready and adhere to industry standards.
EFFICIENCY BOOSTERS
Uncover time-saving tricks and shortcuts. Automate repetitive tasks, manage configurations and optimise your workflow. Become a SolidWorks efficiency champion.
COURSE ASSESSMENT
Demonstrate your new-found skills and knowledge through a comprehensive assessment exercise designed to evaluate proficiency in CAD modelling, assembly creation and simulation techniques. This exercise will encompass real-world design scenarios, ensuring readiness for practical application in professional settings.
CERTIFICATION
Upon successful completion of the SolidWorks fundamental training course, participants will be awarded a certificate of completion. This acknowledges their commitment to enhancing their proficiency in SolidWorks software and improving their capabilities in engineering design and modelling.
COURSE REQUIREMENTS
Participants need to have a basic understanding of SolidWorks or completed the SolidWorks basic training course before enrolling in this course.
DURATION & COST
4 days | £1,050 + VAT
LOCATION
Springfield Hub University of Wolverhampton Wolverhampton, WV10 0JR
CONTACT
TRAINING BOOKING ENQUIRIES
Victoria Bayliss
ECMS Administrator
Elite Centre for ManufacturingSkills
Email: victoria.bayliss@wlv.ac.uk
Tel: 01902 321 678
Visit: www.theecms.co.uk
COURSE RELATED ENQUIRIES
Dr. Manpreet Singh
PhD | M.Sc | FHEA | B.Eng. (Hons)
ECMS Knowledge Exchange Trainer
Elite Centre for ManufacturingSkills
Email: m.singh208@wlv.ac.uk
Tel: 01902 321 908
Visit: www.theecms.co.uk
CAD TRAINING: SOLIDWORKS ADVANCED
TRAINING COURSE
Explore the depths of 3D design proficiency with SolidWorks expertise
COURSE DESCRIPTION
Step into a professional realm of expertise with our advanced SolidWorks training. Designed for experienced users and newcomers alike, this program is meticulously crafted to refine your skills and instil confidence in your design.
COURSE OVERVIEW
Immerse yourself in our meticulously crafted SolidWorks advanced training program, designed to elevate your expertise in precision engineering and innovative design.
Throughout this comprehensive course, you will acquire indispensable skills, such as proficiently creating virtual parts within assemblies, seamlessly integrating features and hardware, and mastering intricate assembly structures. With a sharp focus on error detection, precise component manipulation and adept configuration management, you will confidently navigate through complex assemblies.
Explore advanced mate techniques, refine your assembly editing prowess through post assembly operations, and gain mastery in personalised property management. Whether you are a novice or a seasoned professional, our program offers a sophisticated approach to mastering SolidWorks assembly modelling and design essentials.
COURSE ASSESSMENT
Showcase your enhanced skills and expertise with a thorough assessment exercise, crafted to evaluate proficiency in computer-aided design (CAD) modelling, assembly creation and simulation techniques. This assessment will immerse you in real-world design scenarios, ensuring your readiness for practical application in professional environments.
CERTIFICATION
Upon successful completion of the SolidWorks advanced training course, participants will receive a certificate of achievement. This certificate recognises their dedication to advancing their skills in SolidWorks software and strengthening their abilities in engineering design and modelling.
COURSE REQUIREMENTS
Exclusively designed for students with a solid foundation in mechanical design. Eligibility criteria includes completion of the SolidWorks fundamental training course or a minimum of six months of full-time experience working with the software.
DURATION & COST
3 days | £950 + VAT
CONTACT
TRAINING BOOKING ENQUIRIES
Victoria Bayliss
ECMS Administrator
Elite Centre for ManufacturingSkills
Email: victoria.bayliss@wlv.ac.uk
Tel: 01902 321 678
Visit: www.theecms.co.uk
COURSE RELATED ENQUIRIES
Dr. Manpreet Singh
PhD | M.Sc | FHEA | B.Eng. (Hons)
ECMS Knowledge Exchange Trainer
Elite Centre for ManufacturingSkills
ENROL NOW AND TAKE YOUR DESIGN SKILLS TO NEW HEIGHTS!
Email: m.singh208@wlv.ac.uk
Tel: 01902 321 908
Visit: www.theecms.co.uk
ANSYS MECHANICAL
Getting started: free career development course
COURSE DESCRIPTION
Unlock the power of engineering simulation with our free career development course on ansys mechanical. Whether you’re an aspiring engineer, student or seasoned professional, this course offers a comprehensive introduction to ansys mechanical, a leading finite element analysis (FEA) software.
COURSE OVERVIEW
• Navigate ansys mechanical interface efficiently
• Explore key structural analysis concepts.
• Set up and solve complex engineering problems
• Interpret and analyse simulation results accurately
• Apply ansys mechanical to real-world projects and challenges
CERTIFICATION
Upon successful completion of the ansys mechanical carrier progress development course in FEA, participants will be awarded a certificate of completion, acknowledging their dedication to enhancing their expertise in FEA and advancing their career in engineering.
COURSE
REQUIREMENTS
Basic knowledge of Windows operating system
DURATION
12 hours
TRAINING COST
Free CONTACT
TRAINING BOOKING ENQUIRIES
Victoria Bayliss
ECMS Administrator
Elite Centre for ManufacturingSkills
Email: victoria.bayliss@wlv.ac.uk
Tel: 01902 321 678
Visit: www.theecms.co.uk
COURSE RELATED ENQUIRIES
Dr. Manpreet Singh
PhD | M.Sc | FHEA | B.Eng. (Hons)
ECMS Knowledge Exchange Trainer
Elite Centre for ManufacturingSkills
Email: m.singh208@wlv.ac.uk
Tel: 01902 321 908
Visit: www.theecms.co.uk
ADDITIVE MANUFACTURING AWARENESS
Basic free continuing professional development (CPD) course
COURSE DESCRIPTION
Begin a transformative journey into the world of additive manufacturing (AM) with our comprehensive basic course. Designed for beginners and enthusiasts, this free 12-hour career development program aims to provide a solid foundation in AM technologies, processes and applications.
COURSE OVERVIEW
• Introduce the fundamentals of additive manufacturing
• Explore various additive manufacturing technologies and processes
• Understand the applications and benefits of additive manufacturing in different industries
• Familiarise participants with basic design principles for additive manufacturing
• Provide hands-on experience with basic additive manufacturing tools and software
CERTIFICATION
Upon successful completion of the course, participants will receive a certificate of completion, recognising their commitment to advancing their knowledge and skills in additive manufacturing.
COURSE REQUIREMENTS
None DURATION
12 hours
TRAINING COST
Free CONTACT
TRAINING BOOKING ENQUIRIES
Victoria Bayliss ECMS Administrator
Elite Centre for ManufacturingSkills
Email: victoria.bayliss@wlv.ac.uk
Tel: 01902 321 678
Visit: www.theecms.co.uk
COURSE RELATED ENQUIRIES
Dr. Manpreet Singh
PhD | M.Sc | FHEA | B.Eng. (Hons)
ECMS Knowledge Exchange Trainer
Elite Centre for ManufacturingSkills
Email: m.singh208@wlv.ac.uk
Tel: 01902 321 908
Visit: www.theecms.co.uk
FOUNDRY AWARENESS COURSE
COURSE DESCRIPTION
This course is designed to provide a basic awareness of the foundry industry to anyone interested in the sector and looking for more information.
COURSE OVERVIEW
The two-hour session begins with a short presentation covering the challenges facing the sector, the several departments found within in a foundry environment, and finishes with a glimpse of the future possibilities achievable.
Participants will have an opportunity to write a CV or update an existing one during the session.
To conclude, participants will have the opportunity to take a tour around a working facility and observe what’s involved in the day to day running of a foundry.
COURSE BENEFITS
This course will be beneficial to people looking at starting a career or interested in changing career and working in the foundry industry.
ADDITIONAL INFORMATION
Safety boots will be required but other personal protective equipment will be provided.
DURATION
Two hours
TRAINING COST
Free
LOCATION
The National Foundry Training Centre Tipton Road Tipton West Midlands DY4 7UW
CONTACT
FOR ENQUIRIES AND BOOKINGS
Nicci Taylor
Email: n.taylor10@wlv.ac.uk
Tel: 01902 321 955
Visit: www.theecms.co.uk
PATTERNMAKING BASIC COURSE
COURSE DESCRIPTION
This course provides an opportunity to gain a basic overview of patternmaking and to achieve insight of practical methods to create a pattern from a drawing.
COURSE OVERVIEW
• Health and safety requirements of all machinery and hand tools employed in the session
• A breakdown of a drawing including draft taper, datums, contraction, centre lines and machining
• Setting out of a pattern including a dimensional check sheet
• Construction of a pattern with supervision, using a bandsaw, sanding disc, bobbin sander and pedestal drill and hand tools
• Finishing with fillets and pattern coat red varnish
• Final dimensional check of the pattern
COURSE BENEFITS
Upon successful completion of the course, participants will have a basic experience of patternmaking and a good grounding to develop their skills further.
ADDITIONAL INFORMATION
This course is only available to SMEs. Only one business assist can be claimed per company, with this training. If you’re unsure if your business is eligible for free training please contact the ECMS.
DURATION
12 hours
TRAINING COST
Free
LOCATION
The National Foundry Training Centre Tipton Road Tipton West Midlands DY4 7UW
CONTACT
FOR ENQUIRIES AND BOOKINGS
Nicci Taylor
Email: n.taylor10@wlv.ac.uk
Tel: 01902 321 955
Visit: www.theecms.co.uk
PATTERNMAKING INTERMEDIATE COURSE
COURSE DESCRIPTION
This course provides a comprehensive view of patternmaking including the creation of a pattern of intermediate difficulty, designing a runner system using principles of metal flow and surface areas and mount into a standard compact for use with chemically bonded sand.
COURSE OVERVIEW
• Health and safety requirements of all machinery and hand tools employed in the session
• A breakdown of a drawing including draft taper, datums, centre lines, contraction and machining
• Setting out of a pattern including a dimensional check sheet
• Construction of a pattern with supervision, using a bandsaw, sanding disc, bobbin sander and pedestal drill and hand tools
• Produce a final dimensional report of a pattern
• Conduct a dimensional check of a pattern with metrology equipment provided
• Design and make a simple runner system to fill the mould cavity effectively using a nomogram, including explanation of laminar flow and best practice of runner design
• Construct a compact for use with chemically bonded sand using a plinth and well design and dowelling operations
COURSE BENEFITS
Upon successful completion of the course, participants will have a deeper understanding of patternmaking including other knowledge advantages of runner systems and calculations and the box less moulding process.
DURATION
Three days
TRAINING COST
£1,200 plus VAT
The course fee includes refreshments and lunch.
LOCATION
The National Foundry Training Centre Tipton Road, Tipton West Midlands DY4 7UW
CONTACT
FOR ENQUIRIES AND BOOKINGS
Nicci Taylor
Email: n.taylor10@wlv.ac.uk
Tel: 01902 321 955
Visit: www.theecms.co.uk
