Winch C2075
Technical Data Sheet
The C2075 is custom designed to provide fiber optic signal transfer and power to vector rigged cameras. Built in slip rings provide up to 4 fiber optic channels and 4 electrical circuits. The winch is zero fleet and can be mounted in any position. There is no need for a long distance from the winch to the first pulley. A load cell directly monitors the force on the cable, protecting against both underload and overload.
Specifications, winch • Zero fleet • Any mounting position • Designed for cables up to 6.9 mm • Stroke up to 200 meters • Speeds up to 10 m/s • Dual brakes on output shaft • Direct drive synchronous motor • Dual encoders • Load cell for overload and underload • Size 230 x 55 x 60 cm • Weight approx. 400 kg Specifications, signal • Fiber channels – 1 to 4 • Fiber type – single mode or multimode • Power transfer – 220 VAC 2A Other signal combinations are possible. Model number
C2075 - 75 - 10 - 160 - F
Rated load Options 75 kg F = Fiber Rated speed Stroke 10 meters/second 160 meters 200 meters Revision 2017:1
Visual act Scandinavia AB. Copyright 2017.
Dimension drawing Possible combinations C2075 - 75 - 10 - 160 - F C2075 - 75 - 10 - 200 - F
Suitable drive cabinets D253 - x - 10 - xxx - xxx - xx for 2.5 m/s2 at full load D253 - x - 10 - xxx - xxx - xx for 2.5 m/s2 at full load
The information provided in this document is intended for informational purposes only and is subject to change without notice. Information may be changed or updated without notice. Visual act AB may also make improvements and/or changes in the products, described in this information at any time without notice. Contact information, rentals & sales Värmdövägen 703, SE-132 35 Saltsjö-Boo, Sweden +46 (0)8 522 472 00 / vact@visualact.se / www.visualact.se