Winch P2073
Technical Data Sheet
The P2073 winch is designed for high performance applications such as stunt and camera flying. The direct drive motor and moving-pulley zero fleet system allow for a compact design. As the winches are zero fleet they can be mounted in any position. There is no need for a long distance from the winch to the first pulley. Any number of winches can be combined together with the Visual act Stage Control System to create 2d or 3d rigs of any type. The load cell is part of the zero fleet assembly and provides direct measurement of the line load. The measurement is used to provide an accurate slack line signal, protecting the zero fleet system from fouling. With extra equipment the winches can be fitted with 2 lines, allowing for double lines to increase stability for camera dollies or simple lifts with only a single winch. In this case each line is provided with its own load sensor. Multiple lines (up to 6) can be attached by bypassing the zero fleet system. Standard features • Working loads up to 250 kg • Zero fleet • Adjustable output pulley • Any mounting position • Stroke up to 240 m • Grooved for 4 to 6 mm line • Dual brakes on output shaft • Direct drive synchronous motor • Speeds up to 10 m/s. Higher speeds on request • Dual encoders • Load cell • Weight approx. 400 kg • Size 230 x 55 x 60 cm • Installation by standard 50 mm couplers Model number
P2073 - a - 250 - 8 - 200 - 6 - xx
Generation Options b* L2 = Second line PL = Sprocket for parallel connection Rated load CS = Built into flight case 250 kg 200 kg Rope size 150 kg 6 mm 100 kg 5 mm (150 kg or less) Rated speed Stroke 8 meters / second 200 meters 10 meters / second 240 meters (only 5 mm line) 15 meters / second (150 kg or less) * Generation ’b’ winches does not have operational limit switches. These winches can only be used with control systems that support the use of two absolute encoders to provide safe working limits to the required safety level for the application. Revision 2017:1
Visual act Scandinavia AB. Copyright 2017.
Dimension drawing Suitable drive cabinets D256 - b - 42 - xxx - xxx - xx for 4 m/s2 at full load D256 - b - 42 - xxx - xxx - xx for 3 m/s2 at full load D256 - b - 56 - xxx - xxx - xx for 3 m/s2 at full load
480
Possible combinations P2073 - b - 250 - 8 - 200 - 6 - xx P2073 - b - 200 - 10 - 200 - 6 - xx P2073 - b - 150 - 15 - 240 - 5 - xx
75
550
23
145
Best mounting points (ca. 1940) 2252
The information provided in this document is intended for informational purposes only and is subject to change without notice. Information may be changed or updated without notice. Visual act AB may also make improvements and/or changes in the products, described in this information at any time without notice. Contact information, rentals & sales Värmdövägen 703, SE-132 35 Saltsjö-Boo, Sweden +46 (0)8 522 472 00 / vact@visualact.se / www.visualact.se
692
50mm tube
87
20
600
90