Solutions in Metal
climb. work. rescue.
Photo courtesy of LBO, Norway
Welcome to the ISC product catalogue
forefront of climbing, rigging and rescue product development for more than 15 years and our products are distributed and used in over 25 countries worldwide.
ISC es una empresa conocida mundialmente que se especializa en el diseño, desarrollo y fabricación de componentes de seguridad crítica y otras ‘Soluciones de Metal’. Hemos liderado el desarrollo de productos de alpinismo, jarcia y de rescate durante más de 15 años y nuestros
We supply products globally to the working at height industry which includes Rope Access, Arborists, Emergency Services, Ropes Course, Climbing Walls and Industrial Fall Protection users as well as the Motor Racing, Military and other specialist markets.
Suministramos productos en todo el globo para los trabajadores de sectores de trabajos en alturas, como la arboricultura, los servicios de emergencia, los circuitos de cuerdas, las paredes de escalada y la prevención de caídas en la industria, además de las carreras de motor, el sector militar y otros mercados especializados.
audited and accredited by SGS.
Los productos ISC cumplen con los estándares internacionales, como la Directiva 686/89/CEE relativa a los equipos de Protección Individual, la norma ANSI Z359 y la NFPA 1983, y se fabrican de acuerdo con el sistema de garantía de calidad ISO9001/2008 auditado y reconocido por la organización SGS.
Bienvenue dans le catalogue de produits ISC
conception, le développement et la fabrication d'éléments d'ingénierie développement de produits d'alpinisme, de levage et de sauvetage depuis plus de 15 ans et nos produits sont distribués et utilisés dans plus de 25 pays à travers le monde. Nous fournissons des produits à des entreprises pratiquant le travail en hauteur, notamment les arboriculteurs, les services d'urgence, les centres proposant des parcours acrobatiques ou des murs d'escalade protection contre les chutes. Nous fournissons également le secteur des courses automobiles, l'armée et d'autres marchés spécialisés.
protection audité et accrédité par SGS.
Welkom bij de productcatalogus van ISC
ontwerp, de ontwikkeling en de productie van machinaal vervaardigde onderdelen voor veiligheidsuitrusting en andere 'Oplossingen van Metaal'. We nemen al meer dan 15 jaar het voortouw als het gaat om de ontwikkeling van klim-, hijs- en reddingsproducten en onze producten worden in meer dan 25 landen overal ter wereld verkocht en gebruikt. wordt gewerkt, waaronder bosbouw, hulpdiensten, touwparcoursen, specialistische sectoren zoals de motorsport en het leger. De producten van ISC voldoen aan internationale normen, waaronder CE (richtlijn 686/89/EEC betreffende persoonlijke beschermingsmiddelen), ANSI Z359 en NFPA 1983, en worden vervaardigd in overeenstemming met een ISO9001/2008-kwaliteitsbewakingsysteem dat door SGS is getest en goedgekeurd.
Contents About Us
4
Descenders
6
D2 Escape Descender Kits D4 Work Rescue Descender A-B Descender/Pro Allp Decsnder Figure 8 & Fiqure 9 Descenders Edge Protection
Back-up & Ropegrab Devices
10
tm
RED Back-up Device Ropegrabs & Rockertm
Hand Ascenders
12
Anchors & Accessories
13
Girder Grips/Dyvdag Anchors Wire Anchor Strops Rigging Plates
Climbtechtm Portable Anchors
14
Deadweight Portable Anchors
16
Deadweight Trolley A-Frame
Tripod Systems
18
Tripods Accessories/Brackets Winch Herzlich willkommen zum ISC-Produktkatalog
ISC ist ein weltweit anerkanntes Unternehmen, das sich auf die Konzeption, Entwicklung und Fertigung von Sicherheitskomponenten und sonstigen ‘Lösungen aus Metall‘ spezialisiert hat. Wir stehen seit über 15 Jahren an der Spitze der Produktentwicklung für Kletter-, Spannsystem- und Rettungslösungen, und unsere Produkte werden in über 25 Ländern vertrieben. Wir liefern weltweit Produkte für alle Arten von Höhenarbeiten wie Baumpflege, Rettungsdienste, Hochseilparcours, Kletterwände und industrielle Absturzsicherung sowie für Motorsport, militärische Zwecke und sonstige Spezialmärkte. ISC-Produkte entsprechen internationalen Standards wie CE (PPE Richtlinie 686/89), ANSI Z359 und NFPA 1983. Sie werden gemäß einem ISO9001/2008-Qualitätssicherungssystem von der SGS hergestellt, geprüft und zugelassen.
Benvenuti al catalogo prodotti ISC
ISC è un'azienda di livello mondiale specializzata in progettazione, sviluppo e realizzazione di importanti componenti tecnici di sicurezza e altre ‘Soluzioni in Metallo’. Da oltre 15 anni siamo all'avanguardia nello sviluppo di prodotti per l'alpinismo, per i sistemi di paranchi e per le operazioni di salvataggio e i nostri prodotti vengono distribuiti e utilizzati in più di 25 paesi nel mondo. Forniamo prodotti a livello globale per il settore del lavoro in quota, che include arboricoltura, servizi di emergenza, percorsi elevati, arrampicate e utenti di protezioni anticaduta industriali, oltre a vari mercati specialistici come quello automobilistico o militare. I prodotti ISC sono conformi agli standard internazionali fra cui CE (Direttiva sui dispositivi di protezione individuale 686/89/CEE), ANSI Z359 e NFPA 1983 e vengono realizzati in conformità al sistema di gestione della qualità ISO9001/2008, verificato e certificato da SGS.
Arachnipod Edge Management System
20
Slix100tm Stretcher
21
Fall Arrest Blocks
22
Progress Capture Pulleys
24
R-ALFtm & LH-ALFtm Auto-locking Pulleys
25
tm
ALF
Climb Assist Pulley
26
SmartSnaptm Continuous Attachment Device
27
Zipspeed Tandem Trolleys
29
Pulleys
30
Shear Reduction/Top Roping Eiger Lightweight Heavy-duty Prussiks Cast Rigging Pulleys
PortaWraps
36
Singing Tree Rope Wrench
37
Karabiners
38
Aluminium Steel Stainless Steel
Snaphooks
43
Tactical/Military Products
44
Buckles & Components
45
Quick Release Buckles (QRBs)
48
Terms & Conditions
50
www.iscwales.com
Our philosophy here at ISC is to provide our customers with the best products possible. To achieve this we actively consult with and listen to our customers’ ideas, feedback and expectations. This valuable information is then fed in to our new product development process. Feedback about existing products helps to drive our process of continuous product improvement.
which they are used.
demanding environments in
Our quality system is regularly audited by external auditors SGS UK Ltd and is certified to ISO9001:2008.
Engineering & Design
Manufacturing Facilities
Our engineers use the latest state of the art software, hardware, and systems through the entire product life cycle. This is all
Our highly skilled manufacturing department is where our innovative product ideas are transformed from raw material to finished goods, within our 25,000 ft2 facility in North Wales.
Universities giving us access to the latest thinking, materials
advanced
apprenticeships.
grows, and as we continue to increase the level of technology within our products.
Design, Prototype, Manufacture & Testing
Software & Prototyping
Testing & Quality Control
Image extracted from Solidworks 3D Model of the ISC D4 Descender
– see page 7 for product details
Using the latest Solidworks™ 3D Computer Aided Design (CAD) software provides us with a complete design and virtual enables our engineers to interact in virtual reality with the products to visualise, test, and optimise the design. To complement our design abilities we have advanced in house prototyping facilities. These include both manual and Computer machines are networked to our MasterCAM X™ Computer Aided Machining (CAM) software which allows rapid programming of machinery to produce complex 3D surfaces and shapes. The accurately and repeatedly reproduce our designs in any metal or plastic material required.
relevant national and international standards, as well as our own rigorous standards. At ISC we believe that it is vital that every piece of safety critical equipment that we ship has been thoroughly tested and inspected by highly competent people, reassuring the user that each and every component has been handled by a real person to ensure that it meets the highest standards.
05
Escape Descender
Photo courtesy of ClimbTech, USA
controlled. Either side of the sweet spot there is an auto-lock function -when the user lets go of the handle it automatically stops and when the user pulls the handle too hard it automatically stops (often referred to as a ‘panic-stop’).
Kit Options
Features & Applications Our engineers developed a new handle operated cam system specifically so that in a panic situation the Descender would actually stop the descent, rather than just slow it down– the D2 Descender is the only Micro-Descender in the world to offer this function.
Ployester Rope Standard Polyester ropes are ideal for use in other areas (such as Linesman elevating skylifts).
using the thumb) which allows the user to smoothly feed the rope through the device, without the use of the handle. The cam feed feature is particularly useful for fast Bail-out or for work positioning during roof work for example.
emergency hauling (when used as part of a 2:1 ‘Z-rig’).
work
platforms/
Technora Rope Aramid fibres (such as Technora) are perfect for use in applications where fire is the main hazard (such as bail-out or evacuation from wind turbines).
manufacturers have even integrated it into a harness backpack so that self-rescue can be made easy.
DESCEND
STOP & RESET
Technical Information Code
Indicator Arrow
PANIC BRAKE
Rope
Kit Weight
Rope
Rated Load
(excluding Rope) (g)
(oz)
(g/m)
(oz/ft)
(kg)
(lb)
KT860A Polyester
493
17
45
0.5
100
220
KT860B Technora
493
17
46
0.6
100
220
Work Rescue Descender
The NEW D4 Descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is a double-stop device with an auto-lock function which is activated whenever the operator lets go of the handle. The panic brake will only lock out when in free-fall, meaning that the panic brake is not overly sensitive in normal use.
Features & Applications PRIMED
The D4 cam is made from solid Stainless Steel and is very wear and corrosion resistant. The device has an in-built wear indicator. The D4 Descender cams are replaceable (by competent trained personnel), potentially giving the D4 a longer in-use life. DESCEND
device has a double stop mechanism, as although
RESET
PANIC BRAKE
RP880 D4 Descender Weight Rated Load Rope Standards
> > > >
655g (23oz) 240kg (551lb) 10.5-11.5mm (3/8-7/16”) EN12841, NFPA, ANSI
Push-button & location hole
The D4 Descender also has a double safety locking mechanism, rotated open due to the positioning of the Karabiner and as an additional safety feature the D4 has been designed with a push button ‘click-lock’ safety closure. The D4 is easy to attach/ detach from rope without detaching from operators harness, device.
The D4 is suitable for rescue as it has a rated load of 240kg and is suitable for use with 10.5-11.5mm (7/16”) Low Stretch ropes (EN1891).
07
Descenders (continued)
Photo courtesy of TOPROPE, Switzerland
Features & Applications
Features & Applications Pro ALLP
A-B Descender
controlled descent, or screw-controlled descent adjustment. The screw control allows for precise adjustment and can also
The A-B Descender is a ’squeeze style’ device, designed for use in Technical Rope Access, Intervention/Special Forces and is rated for two-person rescue loads.
descent has been achieved, the Auto-lock function can be activated, putting the Descender in to ‘cruise control’.
activated when the user pulls too hard on the handle and/or if the user lets go of the handle.
The Pro ALLP is rated for a two-person load and is suitable for use in rescue applications.
extended, spring-loaded flip down handle which gives extra leverage when a finer degree of descent control is required. The flip down handle is of particular use for extra control of a two-person rescue load.
Screw Control For precise adjustment and cruise control
RP810
Technical Information Weight
Code
RP400 Main Control Lever
(g)
(oz)
Rope Ø (mm)
(inch)
RP810
A-B Descender
449
16
10.5-11
3/8-7/16
RP400
Pro Allp
589
21
10.5-12.7
3/8-1/2
Figure 8 & 9s
Features & Applications
locking. The Figure 9 device performs in a similar way to the Rescue 8, but has the extra benefit of an anti-twist attachment point. The attachment hole has RP110
RP120
Edge Protection protecting ropes from wear. Each Edge Roller box has base rollers and side rollers, to protect the rope from edge wear and lateral movement. Edge Roller boxes are sold separately and boxes can be added or removed to suit the terrain of each application.
RP100 ER100
Technical Information Code RP101
Type
Weight
MBS
Rope Ă˜
(g)
(oz)
(kN)
(lbf)
(mm)
112
4
25
5620
8-13
5/16-1/2
RP100 Rescue (Aluminium) 196
7
35
7868
9-13
5/16-1/2
9-13
5/16-1/2
(inch)
Figure 8 RP110 Standard RP101 Rescue (Stainless) RP120 Micro 8
600
21
80
17985
56
2
25
5620
5-7
3/16- 5/16
200
7
30
6744
9-13
5/16-1/2
445
16
-
-
8-16
5/16-5/8
Figure 9 RP130 Figure 9 RP130
Edge Protection ER100 Edge Roller (1 unit)
09
Back-up Device
Poppertm Cord provides a secondary attachment point for the tow cord.
Poppertm clip releases under the force. RED Device in locked position
The RED is designed for use with an 800mm dynamic cowstail, (shock absorber not required).
Karabiner Attachment Loop retains device in case of accidental dropping
RP891 Fixed
Rotational Braking
RP892 Popper
Technical Information Code
Type
Weight (g)
(oz)
Rope Ø (mm)
(inch)
RP890
No cord
221
8
10.5-11 3/8-7/16
RP891
Fixed cord
222
8
10.5-11 3/8-7/16
RP892
Poppertm cord
224
8
10.5-11 3/8-7/16
Approved Ropes
The RED makes use of ‘Rotational Braking’ which means that the device rotates clockwise creating friction and resistance, which then results in very effective automatic braking in the breakaway tow-cord.
The RED should be used with Low Stretch 10.5—11.0mm (3/8-7/16”) ropes (EN1891) only.
Ropegrabs
ISC Ropegrabs have non-aggressive cam profiles to help prevent rope wear.
Features & Applications Ropegrabs
Features & Applications Rocker
removable (Pip Pin) axles. The Pip Pin axle is quick and easy to fit/release and can be fitted to the rope at any point, without detatching from the user’s harness.
The Rockertm can be fitted to the rope at any point and can be Rockertm is designed for use without a shock-absorber and can accordance with EN358).
ISC Ropegrabs can be used on work positioning lanyard/ fliplines.
RP500
Thumb-catch
RP204
Allows the Rockertm to be ‘parked’ on the rope at any position, for work positioning
RP203
Technical Information Code
RP500
Type
Rocker
Weight
Rope Ø
(g)
(oz)
(mm)
(inch)
168
6
10.5-12.7
3/8-1/2
Fixed Axle Ropegrabs RP203
Small
177
6
10.5-13
3/8-1/2
RP204
Large
300
11
14-16
9/16-5/8
180
6
10.5-13
3/8-1/2
302
11
14-16
9/16-5/8
Removable Pip Pin Ropegrabs RP205 RP209
RP209
Small
RP205
Large
11
Hand Ascenders
Photo courtesy of DIRA Group, Netherlands
Aluminium extrusion and are suitable for heavy-duty use.
Features & Applications ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Hand Ascenders have both primary and secondary attachment holes.
accidentally pulled out between the cam and the
body.
ISC Professional and Ultrasafe Hand Ascenders have moulded versions.
RP220 RP210
Coned Cam Profile
Ultrasafe Cam Pin
For minimal rope wear
For improved rope retention
Technical Information Code
Type
Weight
Rope Ă˜
(g)
(oz)
(mm)
(inch)
Professional RP210
Left Handed
364
13
9-13
5/16-1/2
RP220
Right Handed
364
13
9-13
5/16-1/2
RP230
Left Handed
367
13
9-13
5/16-1/2
RP240
Right Handed
367
13
9-13
5/16-1/2
Ultrasafe RP230
RP240
Anchors & Accessories
Girder Grip & Concrete Anchors are made from high strength materials & can be used in vertical or horizontal plane. Girder/Concrete Anchors & Strops are Approved to CE EN 795. ISC Rigging Plates are made from high strength Aluminium and have 20mm (3/4”) holes, to allow Karabiners to be fully rotated.
Features & Applications GG101
GG201 anchorage solution which can be used in the vertical or horizontal plane. These anchors are operated by using two fingers to pull back the red collar. This action retracts the retention bar, allowing the device to be inserted in to the anchor hole. Once the device is in position, the red collar can be released, causing the retention bar to engage, fixing the device in the anchor hole. ISC Wire Strops are manufactured from Galvanised Steel, fitted with Thimble eyes and a protective PVC cover. They are available i request).
Technical Information WSX00 Range
Code
Weight
Type
MBS
(g)
(oz)
(kN)
(lbf)
550
19
28
6294
1160
41
28
6294
680
24
28
6294
Girder/Concrete Anchors
RP300
GG101
Small (Girder Grip)
GG201
Large (Concrete Anchor)
GG301
Medium (Pre-cast Anchor)
Wire Strops- EN795 RP310
(other lengths available on request)
WS100
100cm (39”)
502
18
-
-
WS150
150cm (59”)
780
28
-
-
200cm (78”)
998
35
-
-
93
3
36
8093
40
8992
WS200
Rigging Plates RP320
RP300
Small
RP310
Medium
219
8
RP320
Large
442
16
45 10116
13
Photo courtesy of ClimbTech, USA The Climbtechtm range is perfect for use in construction and demolition as well difficult access applications in rope access, rope rescue and even theatre rigging. The anchors can be used with a variety of work positioning, fall protection and rescue systems.
Removable Concrete Anchors ClimbTechtm Concrete Anchors are portable, reusable devices concrete substrate surfaces. Once a suitable hole has been
CT102
CT103
required. These anchors are available in two sizes/ratings and are suitable for use for fall protection applications.
Technical Information Code
Weight (g)
MBS
WLL
(oz)
(kN)
(lbf)
(kg)
(lb)
CT102
181
6
22
5000
140
310
CT103
181
6
44
10000
140
310
Toggle Lok Anchor
CT104
The ClimbTechtm Toggle Lok Anchor is portable, reusable device which can be used as part of a flexible horizontal life line system (for up to two users) or as a direct anchorage connection (single user). The Toggle Lok can be used in precast concrete and on steel flanges and can be placed in horizontal, vertical and overhead surfaces. This Anchor should be placed in to a 20mm (3/4�) diameter hole.
Technical Information Code
Weight (g)
CT104
181
MBS
WLL
(oz)
(kN)
(lbf)
(kg)
(lb)
6
22
5000
181
400
Portable Anchors Beam Trolley
CT100
The ClimbTechtm Beam Trolley is a mobile anchor point, for use on structural beams. The device is fitted with toggle plates, which allow for simple adjustment of the rollers when installing/uninstalling the device. The Beam Trolley is ideal for use as an anchor connection for fall arrest systems (not suitable for material handling). No surface alteration (i.e. drilling) is required in order to use the Beam Trolley.
Technical Information Weight
Code
CT100
MBS
WLL
(kg)
(lb)
(kN)
(lbf)
(kg)
(lb)
3.5
8
22
5000
140
310
Beam Slider CT101
The ClimbTechtm I-Beam Slider is a lightweight, reusable anchor clamp which can be attached to a range of beam widths. The Beam Slider is quick and easy to fit/adjust and eliminates without surface alteration (i.e. drilling) and with no need of tools. Once mounted, the Beam Slider slides freely and easily along the beam in either direction.
Technical Information Weight
Code
CT101
MBS
WLL
(kg)
(lb)
(kN)
(lbf)
(kg)
(lb)
1.5
3
22
5000
140
310
Concrete/Steel Swivel Anchor The ClimbTechtm Concrete MEGA Swivels rotates through portable use for horizontal lifeline systems, tie-back, staging and rigging. The CT105 Concrete Anchor requires a minimum hole depth of 19mm (3/4�).
Technical Information
CT105 (Concrete) Code CT106 (Steel)
Type
Weight
MBS
WLL
(including bolt) (g)
(oz)
(kN)
(lbf)
(kg)
(lb)
CT105
Concrete
917
32
44
10000
181
400
CT106
Steel
847
30
44
10000
181
400
Distributed in Europe by ISC Please contact us for further information
15
Deadweight Trolley
DW100 Images not shown to scale
The Deadweight Trolley is a Portable Anchor Device for use behind Structural Handrails, Balustrades and Parapet Walls*. The Deadweight Trolley is ideal for use where space is limited. The Deadweight Trolley is quick and easy to set up, store and transport. * Requires minimum upstand of 600mm (24�)
Technical Information Height
141cm (55
1/2
inches)
Length
570cm (22
1/2
inches)
Width
540cm (21
1/4
inches)
No. of Component Parts
7 (inc weights)
Max Component Weight
25kg (55lb)
Total Weight
178kg (392lb)
SWL
250 kg (551lb)
CE Certified
EN795:97 Type B
Rated Use
2 Man
Minimum Upstand Required
600mm (24 inches)
Deadweight Anchors
A-Frame
DW200 Images not shown to scale
The A-Frame Anchor is ideal for use on flat roof surfaces*. The A-Frame can be moved sideways as required, therefore saving job time, by reducing the need for re-rigging. The A-Frame has locking wheels, to prevent unwanted movement. The A-Frame easily breaks down in to 6 pieces (plus 12 weights), for easy transport and storage. * Requires minimum upstand of 300mm (12�)
Technical Information 5/8
Height
215cm (84
Length
193cm (76 inches)
Width
142cm (56 inches)
No. of Component Parts
18 (inc weights)
Max Component Weight
25kg (55lb)
Total Weight
390kg (860lb)
SWL
250 kg (551lb)
CE Certified
EN795:97 Type B
Rated Use
2 Man
Minimum Upstand Required
300mm (12 inches)
inches)
17
Tripod
Fall Arrest Blocks
ISC Tripod Heads are manufactured from Cast Aluminium for strength and durability. The standard version (TP143) is fitted with two pulley wheels and removable captive pins keep the
The UB171 Fall Arrest Block has a cast Aluminium housing, making this block suitable for heavy-duty use, even in harsh environmental conditions. The UB171 is fitted with a retrieval winch, which can be easily engaged in emergency situations.
Tripod also has two swivel-eye anchor points. The Tripod legs are adjusted by R-Clip pins, up to a maximum overall height of 255cm (approximately 89”). ISC Tripods are ideal for work and rescue in confined spaces.
The block is fitted with a Swivel-eye Karabiner, which has a loadindicator. In the event of a fall, the swivel eye will pull out a short way, exposing a red collar.
Attachment Bracket A hard wearing Tripod bracket, for use with the ISC Tripod, Block or Winch system. The GRB150 anti-slip bracket is quick and easy to fit, with a hinged lid and screw design. We manufacture brackets to fit a range of Tripods– please contact further information.
GRB150S2
Winch The Rescue Winch is for use in lifting & lowering applications. We manufacture a range of Tripod attachment brackets.
UB171 15m (50ft) Weight WLL Fall Indicator Gate Type Wire Diameter
> > > > >
9kg (20lb) 136kg (300lb) As standard Twistlock 5mm (3/16”)
Service & Repair
The RW020 Rescue Winch has a working length of 20m (65ft)
RW020 The Rescue Winch is fitted with a Steel Swivel eye, doubleaction Snaphook as standard.
We now offer Service Training courses for our Tripod Systems. These courses take place at the ISC Factory in North Wales,
WLL > 140kg (308lb) Weight > 10.2kg (22.5lb)
*Fees apply
Tripods & Accessories
Basic Dimensions cm inches
255 100
225 89
920 680
36
26
TP143 Tripod 122
48
150
59
(accessories sold separately)
Weight > 27kg (60lb) WLL > 350kg (771lb) Max. Height > 255cm (9ft)
19
Gin Pole
A-Frame
Side A-Frame
THE WORLD’S MOST VERSATILE MODULAR TOTAL EDGE MANAGEMENT SYSTEM Handrail Recovery
Tripod/Quadpod
Bridge
The Arachnipod Total Edge Management System is an innovative design that captures multi-functional capabilities. Simplicity and robust engineering provide the world’s most versatile modular, total edge management system. Components can be added or removed to achieve any of the 8 possible configurations. The Arachnipod in its basic form is a Tripod. It consists of three basic telescoping legs, each pivotally connected to an Anodised Head. connect together with a Quik-link Pin (similar to a hinge), which allows quick and simple addition or removal of legs, or bridge beam, to create different configurations. Each head has a D-shaped shackle for guying to stabilise the structure. The Pulley Leg has an inbuilt Pulley, which is mounted on two Stainless Steel Roller Bearings. The Pulley is Stainless Steel and has two grooves– one to take up to 13mm (1/2”) rope and the other to take up to 8mm (5/16”) wire cable. Stainless detent pins prevent the rope or wire from coming out of the grooves.
Distributed by ISC Please contact us for further information
Slix 100tm Stretcher Slix100tm Stretcher
Photo courtesy of ClimbTech, USA
material allows easy slide manoeuvring of the stretcher. The Slix tm can be rolled up widthways or lengthways, for ease of transport and storage.
Slixtm Stretcher finished material allows easy slide manoeuvring of the stretcher. The Slixtm can be rolled up widthways or lengthways, for ease of transport and storage. The webbing straps do not pass underneath the stretcher body, keeping them safe from abrasive damage as the stretcher is dragged over surfaces. The Slixtm stretcher is fitted with several durable web handles, to allow accuracy whilst manoeuvring. The lifting strap anchors are positioned for optimal balance and easy of use as the stretcher is hauler in a horizontal or vertical orientation. Under tension, the lifting straps cause the stretcher to mould around the casualty, for addition support & security.
Technical Information Code SL100
Total Kit Weight (packed)> 12kg (27lb)
Width
Max User Weight
Length
(cm)
(inches)
(cm)
(inches)
(kg)
(lb)
92
36
230
91
400
881
93/42/EEC CLASS 1
21
NEW
MERLIN
tm
All ISC Blocks have solid Aluminium Housings, proven to last in all sorts of environments, from rental to off-shore. The internal mechanisms are simple, making them easily serviceable.
NEW Merlintm 10m (32ft) Block
Fall Indicators
The NEW Merlintm 10m (32ft) is the first in the new, improved range. The Merlintm Fall Arrest Blocks are lightweight blocks, with durable cast Aluminium housings.
following a fall. ISC Fall Arrest Blocks* are fitted with a specialist Karabiner, which indicates when a fall has taken place.
The UB100 Merlintm is fitted with a Steel Swivel-eye, loadindicating Karabiner as standard. The UB100 has a total weight of only 4.34kg (9.7lb).
Indicator Ring is exposed to identify that an inspection is required.
* Choice of hook available on Merlin Fall Arrest Blocks
Service & Repair Become an Approved ISC Block Service & Repair Agent... We offer Fall Arrest Block Service Training courses, which take place at the ISC Factory in North Wales, or can be arranged at your own premises*.
Basic Dimensions Code
Name
Height Width
Height Width
(mm)
(Inches)
UB033 Merlin 3.3m (11ft)
150
110
5
7/8
4
3/8
UB066 Merlin 6.6m (20ft)
190
160
7
1/2
6
1/4
UB100 Merlin 10m (32ft)
290
190
11 7/16
7 1/2
UB050 Webbing 5m (16ft)
210
150
8
1/4
UB051 Wire 5m (16ft)
210
150
8
1/4
UB170 Wire 15m (50ft)
340
200
13
3/8
7
7/8
13
3/8
7
7/8
UB171 Wire 15m (50ft)
340
200
5
7/8
5
7/8
Retrieval
Standards *Fees apply
ISC Fall Arrest Blocks conform to CE and ANSI Standards.
Fall Arrest Blocks
Choice of Hook Available See pages 38-43 for Karabiners & Snaphooks
UB033 3.3m (11ft) Weight > 1kg (2lb) WLL > 136kg (300lb) Fall Indicator > Optional
UB050 5m (16ft) Weight > 3kg (7lb) WLL > 136kg (300lb) Fall Indicator > As standard
UB170 15m (50ft) Weight > 9kg (20lb) WLL > 136kg (300lb) Fall Indicator > As standard
Choice of Hook Available See pages 38-43 for Karabiners & Snaphooks
UB066 6.6m (22ft) Weight > 2kg (5lb) WLL > 136kg (300lb) Fall Indicator > Optional
UB051 5m (16ft) Weight > 3kg (7lb) WLL > 136kg (300lb) Fall Indicator > As standard
UB171 15m (50ft) Weight > 9kg (20lb) WLL > 136kg (300lb) Fall Indicator > As standard
23
Progress Capture Pulleys
The latest range of ISC Progress Capture Pulleys (PCP) now feature a new lightweight centre plate, re-positioned wheel to reduce rope friction and a rated Becket, through which even an ANSI Karabiner can be fully rotated. All PCPs are fitted with tamper-proof rivets and are individually serial numbered. The cam-faces are coned (rather than spiked) to minimise rope wear.
Features & Applications RP700/701
Progress-capture Pulleys incorporate a cam which (when lifting/pulling a load or tensioning a line. To lower/release the line the cam must be manually unclamped by using the flexible Dyneema release cord and held/pinned clear of the rope during the lower/release of the line. One-way Locking Bearings bearings (when roped correctly) will not turn, which means operator much more control. Progress-capture pulleys can be used in all sorts of applications, such as hauling, tensioning & work positioning heavy loads.
RP702/704
Technical Information Code
Type
Weight (g)
MBS
(oz)
(kN)
(lbf)
Double Rescue Pulleys
4:1 Mechanical Advantage System
RP701
Standard
660
23
40
8992
RP700
One-way Bearings
649
23
30
6744
Progress Capture Pulleys –Single
RP702
Standard
663
23
40
8992
RP704
One-way Bearings
672
24
30
6744
Progress Capture Pulleys –Double
RP703/705 Coned Cam-face To minimise rope wear
RP703
Standard
905
32
40
8992
RP705
One-way Bearings
900
32
30
6744
R-ALFtm Rescue Auto Locking Pulley
The R-ALFtm has an over-speed brake built in so that it will automatically lock and hold when a fall occurs. The pick-off kit or a 5:1 hauling kit –and whichever combination is used if the user ever loses control of the descent the over-speed brake will automatically kick-in.
Technical Information Code
Type
Weight (oz)
(kN)
(lbf)
1243
44
-
-
(g)
RP431
MBS
RP431
R-ALF (WLL 250kg/550lb)
RP064
Double Prussik
526
19
50
11240
RP065
Single Prussik
235
8
50
11240
2 : 1 LH-ALF Kit
(Other Heights of Lift available on request)
KT433A1-010 10m H.O.L.
(one-way locking -for Material Handling only) (Other Heights of Lift available on request)
3 : 1 R-ALF Kit
KT431A2-010 10m H.O.L.
(two-way locking) (Other Heights of Lift available on request)
5 : 1 R-ALF Kit
KT431A1-010 10m H.O.L
(two-way locking)
Standard Kit Contents
Features & Applications Components
2:1 Kit
3:1 Kit
R-ALF Hauler (2 –way Locking)
0
1
1
LH-ALF Hauler (1-way Locking)
1
0
0
Atlas Scaffold Anchor Connector
1
1
1
Medium Single Prussik (No Becket)
1
0
0
Medium Single Prussik (Becket)
0
2
0
capable of several thousand cycles and many arrests*.
Medium Double Prussik (Becket)
0
0
2
The Standard R-ALFtm (RP431) locks in both directions. The LH-ALFtm Device (RP433) locks in one direction only and therefore the device will only lock to arrest a fall, leaving the user free to haul at higher speeds, without accidentally engaging the locking mechanism.
Professional Hand Ascender
0 2
2
limitation to ‘height of lift’ being rope stretch and/or kit weight. The R-ALFtm can be used as part of a work suspension themselves off by using a hand ascender and a short strop. The unique design of the R-ALFtm means that an internal
apply
5:1 Kit
The above kits are supplied with Rope to allow for 10m / 32ft Height of Lift (other HOL available), Ropebag & Instructions
25
ALFtm Climb Assist Pulley
The ALFtm is designed for climbing vertical structures such as ladders and is ideal for use in Ropes Courses. Fall distance is limited to a few centimetres. be incapacitated, but if this happens a rescue can easily be organised from ground level, unlike the majority of fall arrest devices where a rescuer must climb up (therefore putting himself at risk) to make the rescue .
Rigging
RP430 ALF Climb Assist Pulley
How it Works locking system, which combines a speed sensitive inertia locking brake system, with a grooved pulley wheel. At low speed (during normal use), the rope runs freely through the pulley. In the event of a fall, the rope speed increases causing the inertia brake to kick in, to promptly arrest the fall. Fall distances are extremely short, so in most cases the fallen user can regain their grip on the structure and resume their climb, without the need for assistance/ instruction. The ALFtm Pulley is a two-way locking device which can be rigged in a continuous loop system with Alpine Butterfly attachment loops at opposing ends of the system. This always an attachment loop present, allowing the next user to immediately commence their climb/descent.
Alpine Butterfly Attachment Loop, with Karabiner
RP066 Large Single Prussik
Applications The ALFtm Climb Assist Pulley was developed with users in mechanical method of protecting multiple climbers en route around a ropes course. The ALFtm provides a simple, cost effective solution, which utilises industry standard (EN1891) low-stretch 11mm (7/16�) rope. The continuous competent person. The ALFtm Climb Assist Pulley can also be used as a solution construction applications.
Technical Information Code
Type
View the ALFtm Demo Video:
www.youtube.com/iscmarketing
RP430
ALF Climb Assist
Weight (lb)
(kN)
(lbf)
1330
3
-
-
463
1
70
15736
(WLL 140kg/310lb)
RP066
Large Single Prussik
MBS
(g)
Photo courtesy of ZIPStream Aerial Adventure Parks
SmartSnaptm is a self-belay system which allows a user to traverse all the individual elements of a course without ever being able to detach from the line. SmartSnap tm is really simple to use and therefore doesn’t require in depth user training; it is lightweight and is therefore perfectly suitable for children to use. The SmartSnap tm has been designed so that it can easily be retro-fitted to an existing course.
View the SmartSnap Demo Video: www.youtube.com/iscmarketing How it Works
Each course user wears a SmartSnap Device, attached to their harness by a short lanyard. At the beginning of the course, the Supervisor attaches red gate of the SmartSnap to the wire [Figure 1] and locks the gate, using the wire-mounted key [Figure 2]. The user then travels to the next change-over point, where they clip the blue gate on to the Ring Key lanyard [Figure 3]. The user then inserts the spike of the Ring Key in to a hole [Figure 4]. This action simultaneously locks the Blue gate AND unlocks the Red gate [Figure 5], releasing the user from the previous element, and allowing them to safely attach to the next element.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5 Technical Information
Code
RP420
Type
Weight
SmartSnap
KY004A Ring Key
KY004 Ring Key
KY005 Wire Key
“
We love the SmartSnap system because it embodies two critical values that are central to our operating ethos; it provides 100% tieoff security by disallowing unintentional disconnection from the belay system, while also retaining participant involvement in the transfer process. It’s an ingenious product and is the standard belay system we use for our brand of ZIPStream Aerial Adventure Parks.
”
“ingenious”
Don Stock, President ZIPStream® Aerial Adventures
MBS
(g)
(oz)
(kN)
(lbf)
316
11
25
5620
130
5
25
5620
KY005A Wire Key
[for 13mm (1/2”) Wire]
36
1
N/A
N/A
KY005B Wire Key
[for 10mm (3/8”) Wire]
36
1
N/A
N/A
“user friendly”
“
upgrade its safety system without the need for an expensive course re-design and re-fit. The user friendly SmartSnap has meant that we are now able to allow children as young as 6 year old on the course.
”
William Moyle, Site Manager Bedale Aerial Extreme Ltd
27
Special Projects
Kevin Thomas, ISC Goods Inwards Coordinator
Visitors to the Zipworld attraction take flight on the ‘Little Zipper’ 450m (1476ft) long Zipline and the ‘Big Zipper’, the 1750m (5741ft) long Zipline which plunges down over the quarry from the 213m (700ft) high summit! When approached to manufacture a Zip Trolley worthy of the task, we got straight on to it...
The Brief The Snowdonia National Park in North Wales was to become home to the UK's Heart of Adventure
ZipWorld site- Penrhyn Quarry, North Wales
A Zipline this big and this fast needed a trolley
serious work went into the Zipline construction, harness. ZipWorld has two Zip lines on site in Penrhyn Quarry. The ‘Little Zipper’ is a 450m (1476ft) long line, but the main attraction for the adrenaline hungry thrillseekers is the 1750m (5741ft) ‘Big Zipper’! Those brave enough to take on the Big Zipper will fly down the quarry at speeds in excess of 75mph (110kph)! To achieve this kind of speed, a very special Zipline Trolley was needed. The ZipWorld Trolleys needed to be big, but not too heavy. The trolleys environmental conditions. Each trolley is fitted with top grade wheel bearings, which are capable running at high speeds and perform consistently within a wide range temperatures. The wheels are made from a special material, which capable of tens of thousands of zip miles, without causing undue wear the cable. The wheels also offer a low decibel output during the flight.
of of is to
[Right] The Zipworld Trolley, manufactured by ISC
Wayne Ellis, ISC Commercial Director
Denny Moorhouse, ISC Chairman
Adam Davies, ISC Customer Service
Zipspeed Tandem Trolleys
RP075
RP076
The NEW ISC Zipspeed Tandems represent industry leading Zipline Trolley innovation at its most affordable! The design of these mid-size trolleys uses state of the art engineering techniques to ensure that they run and run. Lightweight but tough, they offer several unique features. The new trolleys have been trialled and are in use at several major parks around the world. These are possibly the fastest, strongest & most durable Zipline Trolleys in their class.
Features & Applications
Zipspeed Trolleys are fitted with special Rubber-sealed, Deep Groove Ball Bearings as standard. These Bearings have been chosen for optimal high speed, low friction performance. The rubber seals retain the grease lubricant, whilst defending the Bearings from moisture and contaminants; giving the Zipspeed a lifespan of several thousand miles/kilometres. The Zipspeed Trolleys are fitted with a rubber brake-buffer* to absorb impact load at the end of the run and have several attachment hole options, including an extra Karabiners and Snaphooks. The rear attachment hole can be used to attach a secondary lanyard and the small central hole can be use to attach an accessory bar/handle. optimal high speed, low friction performance.
*Replaceable wear item
Technical Information
Options Zipspeed Trolleys are available with 50mm (2”) or 75mm (3”) Diameter wheels, to suit lines of varying tension, gradient & speeds.
Code
Type
Axle Colour
MBS
Weight (g)
(oz)
(kN)
(lbf)
50mm (2”) Diameter Wheels
We also offer versions to suit 13mm (1/2”), 16mm (5/8”) or 20mm (3/4”) Wires and each Trolley is fitted with a colour coded collar for quick, easy identification.
RP075A
13mm (1/2”) Wire
876
31
40
8992
RP075B
16mm (5/8”) Wire
874
31
40
8992
[Top Elevation]
RP075C
20mm (3/4”) Wire
875
31
40
8992
Colour-coded identification collar
75mm (3”) Diameter Wheels
RP076A
13mm (1/2”) Wire
1796
63
40
8992
RP076B
16mm (5/8”) Wire
1794
63
40
8992
RP076C
20mm (3/4”) Wire
1789
63
40
8992
29
Shear Reduction/Top Roping
Features & Applications The RP029 Shear Reduction Pulley is made from Stainless Steel and fitted with a top bollard attachment point. The wheel of this pulley does not rotate, giving maximum friction. control when used in lowering applications, such as top roping in Climbing Walls/Gyms and Ropes Courses. Single Prussik Pulleys, in Aluminium and Stainless Steel. See pages 32 & 33 for further information.
RP029 Fixed Wheel Shear Reduction Block
Technical Information Code
Wheel Material
Max Rope Ă˜
Weight
MBS
(mm)
(Inches)
(kN)
(lbf)
(g)
(oz)
13
1/2
45
10116
820
29
Shear Reduction Pulley
RP029
Fixed Wheel Shear Reduction
Stainless Steel
Eiger Lightweight Pulleys
ISC lightweight Eiger Pulleys are made from high strength are fitted with Bushings, which are ideal in lightweight applications.
Pulleys
RP012 Small Single
RP030 Small Double
RP031 Double Re-direct
RP032 Medium Single
RP033 Medium Double
RP034 Medium Single
RP037 Micro
RP037C Micro
(rated bridge)
Stainless Steel
Technical Information Code
Wheel Material
Max Rope Ă˜
Weight
MBS
(mm)
(Inches)
(kN)
(lbf)
(g)
(oz)
13
1/2
36
8093
87
3
Eiger Pulleys
RP012
Small Single
Aluminium
RP030
Small Double
Aluminium
13
1/2
35
7868
150
6
RP031
Double Re-direct
Aluminium
13
1/2
30
6744
126
5
RP032
Medium Single
Aluminium
13
1/2
36
8093
158
6
RP033
Medium Double
Aluminium
13
1/2
36
8093
284
10
RP034
Medium Single (Double Ended)
Aluminium
13
1/2
36
8093
181
6
RP037
Micro Pulley (12kN Rated Bridge)
Aluminium
13
1/2
28
6295
90
3
13
1/2
40
8992
174
6
RP037C
Micro Pulley (Stainless Steel)
Stainless Steel
31
Pulleys– Heavy Duty Prussiks
All Pulleys in our latest Prussik range have tamper-proof Rivets, in compliance with CE EN12278 (2007) Reduction versions are available on request*.
Technical Information Part
Becket
Wheel Material
MBS
Max Rope Ø
Weight
(mm)
(Inches)
(kN)
(lbf)
(g)
(oz)
8992
200
7
Aluminium
RP060
Small Single
NO
Aluminium
13
1/2
40
RP061
Small Double
YES
Aluminium
13
1/2
40
8992
340
12
RP063
Medium Single
NO
Aluminium
13
1/2
50
11240
280
10
RP064
Medium Double
YES
Aluminium
13
1/2
50
11240
500
18
11240
RP065
Single with Becket
YES
Aluminium
13
1/2
50
215
8
RP066
Large Single
NO
Aluminium
16
5/8
70
15736
463
17
RP067
Large Double
YES
Aluminium
16
5/8
70
15736
760
27
RP069
Extra Large Single
NO
Aluminium
19
3/4
70
15736
440
16
Bushings
Roller Bearings
Ideal for high loads at low speed
Ideal for low loads at high speed
Technical Information Part
Becket
Wheel Material
Max Rope Ă˜
MBS
Weight
(mm)
(Inches)
(kN)
(lbf)
(g)
(oz)
Stainless Steel
RP060
Small Single
NO
Stainless Steel
13
1/2
40
8992
372
14
RP061
Small Double
YES
Stainless Steel
13
1/2
40
8992
674
24
RP063
Medium Single
NO
Stainless Steel
13
1/2
50
11240
584
21
RP064
Medium Double
YES
Stainless Steel
13
1/2
50
11240
1036
37
RP065
Single with Becket
YES
Stainless Steel
13
1/2
50
11240
413
15
RP066
Large Single
NO
Stainless Steel
16
5/8
50
11240
896
32
RP067
Large Double
YES
Stainless Steel
16
5/8
50
11240
1626
58
33
Cast Rigging Pulleys
indentify the correct Block for the task. We have introduced a new fixed bollard dimension, which allows the user to fall in-line with rigging standard practice, whereby the Anchor/Topping Strop should be twice the strength of the Working Line.
Features
Rounded Plates
Markings Plate
Wider Profile
Chamfered Pin Head
Smooth edges minimise rope wear
Quick, easy Pulley identification
Accommodates larger Topping Strops
For quick, easy location of the Spring-lock Pin
Technical Information Part Code
Side Cheeks
Pulley Wheel
WLL
(lb)
(mm)
(Inches)
(kg)
RP050
2000
4400
13
1/2
RP051
2000
4400
16
5/8
RP054
3000
6600
16
RP055
3000
6600
RP056
2000
4400
RP057
4000
8800
MBS
Size
MBS
(kg)
Unit Weight
Topping Strop
Working Line Size
(lbf)
(mm)
(Inches)
(kg)
(lbf)
(kg)
(lb)
4500
9900
19
3/4
10630
24000
1.8
3.5
7720
17000
25
1
17180
37800
1.8
3.5
5/8
7720
17000
25
1
17180
37800
2.5
5
19
3/4
10630
24000
29
1 1/8
21270
46800
2.5
5
16
5/8
7720
17000
25
1
17180
37800
1.6
3.5
19
3/4
10630
24000
29
1 1/8
21270
46800
3.8
8.5
TRIED, TESTED...
RP050
RP051
RP054
RP055
RP056 Flame
RP057
35
Portawraps
Application & Features ISC Portawraps are designed for lowering loads of up to 1000kg, with consistent friction for total control. ISC Portawraps have main and secondary attachment points , to offer extra stability of the device against the tree. giving a bend ratio of approximately 3.5 : 1 and can be used with ropes of up to 13mm (1/2”), to lower loads of up to 750kg (1653lb). The large Portawrap (AE160) has a 75mm (3”) diameter, giving a bend ratio of approximately 4.5 : 1 and can be used with rope of up to 16mm captive attachment points, where Karabiners can be attached around the working line, to keep the working line in place.
AE160 Large Weight > 2.7kg (6lb) SWL > 1000kg (2200lb) Max Rope > 16mm (5/8”)
AE150 Small Weight > 2.3kg (5lb) SWL > 750kg (1653lb) Max Rope > 13mm (1/2”)
Rope Wrench
126g (5oz)
The Singing Tree Rope Wrench (STRW) creates a “bend” above the climbers hitch on the single line which, with the addition of the tether to connect to the STRW, creates a “contained doubled rope the tree allowing for a level of consistency of friction on the hitch which is impossible to duplicate in doubled rope climbing. The Singing Tree Rope Wrench (STRW) is manufactured and distributed by ISC
How it works The Rope Wrench is a unique and innovative device, designed by Kevin Bingham of Singing Tree. RP280
The STRW allows so many more options for safe movement in the tree friction control than that achieved using double rope. The STRW allows far greater flexibility and opens up a wide range of new working possibilities. In double rope climbing, friction levels never remain constant due to rope running over limbs, re-directs and Pulleys. The STRW
technique). The STRW also allows the user to easily pass any limbs which obstruct their route- it is possible to pass obstructions when using DRT, but it can be a very tricky manoeuvre!
ZK-2 New Features The smaller, lighter design works well with the stiff tether, which keeps the STRW away from the hitch. The ZK-2 Rope of a Pulley wheel keeps the rope round, so there’s less rope flattening than with the ZK-1 version.
RP281 Rope Wrench Pulley (Parallel Sides)
Kit Code KT280
NOTE: The STRW is not for primary life support. primary life support.
The hitch provides the
37
Aluminium Karabiners Aluminium Karabiners
ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Aluminium Karabiners are of sleek ergonomic design, with a high strength to weight ratio.
Basic Dimensions
Colour Coded ISC Aluminium Karabiners have colour-coded Barrels/ Ferrules for quick, easy identification.
(double-action) Turn, open
Unscrew, open
Supersafe
Quadlock
(triple-action)
(quad-action)
Lift, turn, open
Turn, lift, turn, open
W
H
(mm)
KH214 Twistlock
Screwgate
H
Name
Code
Mini HMS
102
W (inch)
74
3
4
3
1/3
KH204
HMS
124
78
4
7/8
KH411
Luke
112
70
4
3/8
2
3/4
KH453
Gator
105
65
4
1/8
2
1/2
KH452
Gecko
115
75
4
1/2
3 3
1/2
KH451
Mongoose
133
88
5
1/4
KH301
Captive Eye
137
75
5
3/8
3 2
3/8
2
7/8
KK215
Link
113
61
4
1/2
KH255
Twister
175
72
6
7/8
Gate opening measurements are approximate, based on Supersafe Gates
Blind Nose ISC Performance Karabiners are forged with a blind nose, to prevent snagging.
B
Options
P
Blind Nose
Captive Pin Available Captive pins can be fitted to keep lanyard/webbing in place, to prevent unwanted rotation, therefore reducing the risk of side loading. Captive pins are supplied loose and can be easily fitted as necessary.
UNIQUE to ISC
F
Fall Indicator Available Swivel-eye Karabiners can be supplied with fall indicating rings. In the event the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.
TL
B
B
TL
TL
SSQ
SS
SS
SSQ
SSQ
KH204 HMS
Weight > 98g (3.5oz) Gate Opening > 19mm (3/4”) MBS > 27kN (6070lbf)
B
Weight > 80g (2.8oz) Gate Opening > 20mm (3/4”) MBS > 25kN (5620lbf)
SG
B
SG
TL
TL
TL
SS
SS
SS
SSQ
SSQ
SSQ
KH453 Gator
KH452 Gecko
Weight > 47g (1.7oz) Gate Opening > 15mm (5/8”) MBS > 25kN (5620lbf)
KH451 Mongoose
Weight > 86g (3oz) Gate Opening > 21mm (7/8”) MBS > 30kN (6744lbf)
SG TL SS
B
Weight > 118g (4.2oz) Gate Opening > 24mm (1”) MBS > 30kN (6744lbf)
SG TL
P
SS
SSQ
B
SG TL
F
SS
SSQ
KH300 Captive Eye Weight > 99g (3.5oz) Gate Opening > 20mm (3/4”) MBS > 30kN (6744lbf)
KH411 Luke Oval
Weight > 103g (3.6oz) Gate Opening > 22mm (7/8”) MBS > 27kN (6070lbf)
SG
B
SG
SS
KH214 Mini HMS
B
B
SG
KH215 Link Weight > 90g (3.2oz) Gate Opening > 15mm (5/8”) MBS > 25kN (5620lbf)
SSQ
KH255 Twister Weight > 142g (5oz) Gate Opening > 15mm (5/8”) MBS > 27kN (6070lbf)
Bentgate Karabiners
B
P
The KH453 Gator Bentgate is ideal for use as a Toolhook and Restraints.
NOT for PPE Bentgate Karabiners are NOT for use as PPE purposes and are marked accordingly.
KH453BG Gator Bentgate
KH204BG HMS Bentgate
Weight > 46g (1.6oz) Gate Opening > 22mm (7/8”) MBS > 25kN (5620lbf)
Weight > 88g (3.1oz) Gate Opening > 30mm (1 1/8”) MBS > 25kN (5620lbf)
39
Steel & Stainless Steel Karabiners
ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Steel Karabiners are of sleek ergonomic design, with a high strength to weight ratio.
Basic Dimensions
Gate Options Twistlock
Screwgate
Code
H
Name
(double-action) Turn, open
Unscrew, open
Supersafe
Quadlock
(triple-action)
(quad-action)
Lift, turn, open
Turn, lift, turn, open
Nose Types
B Blind (Non-Snag) noses as standard
K Choice of Standard Hook nose or Keelock Nonsnag nose
W
W
H
(mm)
(inch)
KH219
Iron Wizard (S)
125
72
4
7/8
2
7/8
KH455
Big Dan
137
86
5
3/8
3
3/8
KH212
HMS
127
80
5
3
1/8
KH202
Klettersteig
125
85
4
7/8
3
3/8
KH311
Oval
106
58
4
1/8
2
1/4
KH200
Offset D
113
63
4
1/2
2
1/2
KH260
Twister
175
75
6
7/8
3 2
KK308
D Shape
105
55
4
1/8
KH301
Captive Eye (S)
136
76
5
3/8
3
KH307
Firemans
173
95
6
7/8
3
KH415
Iron Wizard (L)
180
102
7
1/8
3/4
4
KH305
Captive Eye (L)
188
107
7
3/8
KK400
Atlas
200
145
7
7/8
5
3/4
KH407
Scaffold
240
135
9
1/2
5
3/8
4
1/4
Gate opening measurements are approximate, based on Supersafe Gates
Options
P
Captive Pin Available (supplied loose)
F
Fall Indicator Available When a fall occurs, a red indicator ring is exposed
ANSI Compliant (3600lb) Barrels available
F
Fall Indicator Available Swivel-eye Karabiners can be supplied with fall indicating rings. In the event the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.
SG TL
B
SS
SG TL
B
SS
SSQ
SG TL
B
SS
SSQ
SSQ
Side opening
KH219 Iron Wizard (Small) Weight > 264g (9.3oz) Gate Opening > 28mm (1 1/8”) MBS > 70kN (15736lbf)
Weight > 365g (12.9oz) Gate Opening > 27mm (1 1/8”) MBS > 50kN (11240lbf)
K
SG
P
K
TL
SS
SS
SG
K
Weight > 255g (9oz) Gate Opening > 20mm (3/4”) MBS > 50kN (11240lbf)
SG
SG
TL
TL
P
SSQ
K
KH260 Twister Weight > 348g (12oz) Gate Opening > 18mm (3/4”) MBS > 40kN (8992lbf)
SS
KH200
Weight > 188g (6.7oz) Gate Opening > 18mm (3/4”) MBS > 25kN (5620lbf)
SS
TL
P
KH311 Oval
Weight > 250g (8.8oz) Gate Opening > 26mm (1”) MBS > 50kN (11240lbf)
F
Weight > 276g (9.7oz) Gate Opening > 23mm (7/8”) MBS > 50kN (11240lbf)
SG
TL
KH202
B
KH212 HMS
KH455 Big Dan
SS
SG TL
B
SS SSQ
KH308 Weight > 175g (6.2oz) Gate Opening > 17mm (5/8”) MBS > 35kN (7868lbf)
KH301 Captive Eye Weight > 261g (9.2oz) Gate Opening > 18mm (3/4”) MBS > 50kN (11240lbf)
41
SG TL
P
SS
TL SS
B
TL SS
B
Side opening
Side opening
KH415 Iron Wizard (Large)
KH307 Firemans Weight > 400g (14.1oz) Gate Opening > 48mm (1 7/8”) MBS > 40kN (8992lbf)
Weight > 540g (19oz) Gate Opening > 33mm (1 1/4”) MBS > 70kN (15736lbf)
TL
P
KH305 Captive Eye (Large) Weight > 395g (14oz) Gate Opening > 45mm (1 3/4”) MBS > 40kN (8992lbf)
TL
P
KH400 Atlas
KH407 Scaffold Hook
Weight > 816g (28.8oz) Gate Opening > 57mm (2 1/4”) MBS > 45kN (10116lbf)
Weight > 678g (23.9oz) Gate Opening > 53mm (2 1/8”) MBS > 35kN
SG
SG TL
P
SS
TL
P
KH200
SS
SG
SS
SS
KH219 Wizard
Weight > 174g (6.1oz) Gate Opening > 16mm (5/8”) MBS > 22kN (4946lbf)
TL
TL
B
KH308
Weight > 255g (9oz) Gate Opening > 20mm (3/4”) MBS > 35kN (7868lbf)
P
Stainless Steel
Weight > 286g (10oz) Gate Opening > 27mm (1 1/8”) MBS > 50kN (11240lbf)
SG
TL SS
P
TL
F
SS
B Side opening
KH307 Firemans Weight > 400g (14.1oz) Gate Opening > 48mm (1 7/8”) MBS > 40kN (8992lbf)
KH202 Weight > 269g (9.5oz) Gate Opening > 22mm (7/8”) MBS > 35kN (7868lbf)
KH250 Twister Weight > 235g (8.3oz) Gate Opening > 18mm (3/4”) MBS > 23kN (5171lbf)
Snaphooks
B
B
SH901
B
SH901P
3
SH903
Triple-action Gate
3
Small Aluminium Snaphooks are available with the increased gate security.
F
NEW Stainless Steel version
supplied with fall indicating rings. In the event of a fall, the red ring is exposed, altering the user that a fall has taken place.
Also available with triple-action gate
B
B
SH904
SH905
F
SH824
SH826
F
F
3
Technical Information SH999
Code
Type
Weight
MBS
(g)
(oz)
(kN)
4.4
Gate Opening
(lbf)
(mm)
(inch)
27
6070
23
7/8
Standard Snaphooks– Aluminium
Locking Nose
SH901
Double Action
125
SH903
Triple Action
128
4.5
27
6070
23
7/8
SH901P
Double Action
319
11.5
27
6070
26
1
Swivel Snaphooks– Aluminium
(Fall indicating versions available)
SH904
Double Action
191
7.0
27
6070
22
7/8
SH905
Triple Action
200
7.2
27
6070
22
7/8
Large Scaffold Snaphooks– Aluminium
Images not shown to scale
SH979
Double Action
514
18
30
6744
65
2
1/4
SH999
Double Action, Locking Nose
495
17
35
7868
60
2
3/8
Double Action
287
10
27
6070
21
7/8
Standard
SH824
(Fall indicating versions available )
Steel Snaphooks– Swivel
SH979
SH826
Double Action
387
13
30
6744
20
3/4
43
Tactical Finishes
Ascent and Descent devices. Our range caters for Special Forces Black Tactical, Military and NATO operations.
RP120 Micro Figure 8
Matt Black
Sand
Olive Drab
Specialist finishes are available across a range of products including Karabiners, Pulleys & specialist devices. Please contact us to discuss your requirements.
Klick-lock Buckles
We manufacture a wide range of Buckles & Fittings. If you are looking for a Buckle/Fitting which is not shown, please contact a member of our Customer Services Team.
BU190
BU180 Black versions also available
NEW Stainless Steel version
BU182
Technical Information Code
Buckle Size (mm)
(inch)
Weight
Tang Size (mm)
(inch)
(g)
(oz)
Supplied with Tang & 3 Bar Slide -20kN (4496lbf)
BU180
BU183
BU183
1
45
3/4
1
25
45 45
1
3/4
138
4.9
1
3/4
124
4.4
1
3/4
122
4.3
3/4
108
3.9
94
3.3
Supplied with Sliding Bar Tang -16kN (3597lbf)
BU182 BU185
1
45
3/4
45
BU184
25
1
45
1
BU185
25
1
25
1
Supplied with Tang & 3 Bar Slide– 20kN (4496lbf)
BU184
BU190
45
1
3/4
45
(Stainless Steel)
1
3/4
248
8.7
45
Buckles & Fittings Chest Ascender
designed for use on a full body harness, and therefore it is ideal for use in Rope Access work.
RP229
The cam is spring-loaded and fitted with a catch mechanism, to allow for easy one-handed operation of the device whilst attaching/ removing the device to/from the rope. Suitable for use on 9-13mm (5/16-1/2�) Rope.
The Chest Ascender has an increased grip at low load, even on wet, greasy/oily ropes. The spikes are angled downwards, giving maximum grip, whilst allowing the cam to slide easily up the rope.
Adjuster Buckles
BU170
BU171
BU174
Technical Information Code
(mm)
BU173
Weight
Size (inch)
(g)
(oz)
Web Adjuster Buckles
45
1
BU171 Aluminium
75
3
BU173 Steel
75
3
BU174 Steel
45
1
3/4
3/4
60
2.1
112
4.0
100
3.5
65
2.3
Technical Information Code
Weight
Size (mm)
(inch)
(g)
(oz)
3/4
30
1
40
1.4
34
1.2
45
1.6
3 Bar Slides– Stainless Steel
BU102/106
BL121/122
BU102G
BU121E
BU102
45
BU106
50
1 2
Square Links– Stainless Steel
BL121
45
1
BL122
50
2
3/4
3 Bar Slides– Steel
(*Heavy-duty) 3/4
45
1
30
1
BU200*
50
2
46
1.6
BU101*
75
3
102
3.4
45
1
3/4
48
1.7
45
1
3/4
35
1.2
50
2
78
2.8
45
1
72
2.5
50
2
76
2.7
50
2
86
3.0
45
1
3/4
82
2.9
45
1
3/4
82
2.9
Sliding 3 Bar– Steel
BU200
BU101
AP184
AP184 Square Links– Steel
BL121E Compact Hook
SH101 Pressed Delta
BD302
3/4
D-Ring– Steel
SH101
DD302
BD304
D-Ring with Leg– Stainless Steel
D-Rings– Aluminium
BD600D Flat
Aluminium Rings– 25kN MBS
RIN0011 Large
-
-
38
1.3
-
-
54
1.9
-
-
118
4.1
-
-
166
5.9
Steel Rings– 70kN MBS
BD307
BD600D
BD600C RIN0013 Large RIN0011
RIN0013
RIN0012
RIN0010
Ring Dimensions:
Small Ring:
Large Ring:
ID= 27mm (1 1/8”) OD= 51mm (2”)
ID= 45mm (1 3/4”) OD= 70mm (2 3/4”)
ID= Internal Diameter OD= Outside Diameter
47
Quick Release Buckles (QRB)
Photos courtesy of Corbeau Seats/Luke Racing
We manufacture a wide range of Quick Release Buckles for the Motor Racing Industry, to suit FIA/SFI standards requirements.
Body Type
Tangs ISC Tangs are stamped and have ergonomic, rounded edges. Standard Tangs are available in flat, or 20o cranked versions. Standard Tangs are available with a Silver or Black finish. Long Moustache Tangs are also available.
Lids
Buckle Opening QRBs fitted with a Rotary mechanism release their tangs as soon as the user begins to rotate the lid. With the
AP154A Cranked, Silver
AP154C Cranked, Black
Motion helps to prevent accidental opening.
Positioning QRBs can be supplied with a fixed tang in any position, to allow for driver preference.
AP150A Flat, Silver
Specialist Models We also manufacture a Stainless Steel QRB. This QRB is ideal for use in off-shore & Helicopter SAR use.
AP153 Moustache Tang, Silver
AP150B Flat, Black
QR171 Full Lug Lid (FIA) QRB Streamline, Lost Motion Mechanism (Parking)
QR173 Half Lug Lid (SFI) QRB Streamline, Lost Motion Mechanism (Parking)
QR153 Machined Lid QRB Standard, Rotary Mechanism (Parking)
QR174 QRB Streamline, Lost Motion Mechanism (Non-Parking)
49
Terms & Conditions
1. Incorporation of Conditions of Sale sold by the seller subject to these stipulated or referred to by the buyer, whether in the order or in any document conditions of sale are the only terms or conditions upon which the seller sells or supplies the goods. 2. Payment I) Where credit terms apply, payment is due within 30 days of the date of the seller’s invoice to the buyer. II) If any payments due to the seller are not made on the due date the seller reserves the right to suspend any or all the deliveries of goods ordered by the buyer and/or by notice in writing to the buyer to cancel the contract without being liable for the consequential loss. III) The seller reserves the right to charge the buyer interest on any sum outstanding beyond the period of credit allowed at the rate of 2% per month or part of a month. IV) Accounts are strictly net and remittances by cheques should be accompanied by the remittance advice, indicating the invoices being settled. 3. Credits acknowledged by the seller’s official credit note. 4. Delivery I) Stated delivery terms shall not be binding on the seller. The seller shall not in any event be liable for any cost or damage caused by any reason of any delay in delivery. Ii) A goods delivery will be assumed to have been made unless proof of delivery is requested within 14 days of invoice date. The buyer shall be deemed to have examined the goods at the time of delivery. 5. Force Majeure The seller shall not be liable in any way for loss or damage arising directly or indirectly through or in consequence of delivery of the goods being prevented or delayed by happenings or occurrences due to or by reason of mobilisation, hostilities, acts of the Queen’s enemies or war (whether declared or not), government action, departmental instructions or act of god, riots, combination of workmen, lockouts, strikes or disturbances wherever taking place, shortage of labour, raw materials, fuel or power in consequence of non-delivery or any other cause, want of transport, accidents, fire, flood, blocking of or accidents advertised times, reduction or stoppage of output at the works where the goods are being manufactured or premises to which they are to be provision to the seller of any materials information or instructions pertinent to the fulfilment of the order for the goods by the seller, or any other causes or any circumstances whatsoever beyond the seller’s
and in these circumstances the seller expressly reserves the right to cancel or suspend the whole or any part of any delivery. 6. Quantities will be stated in the invoice. 7. Warranty and Liability I) T set out in the seller’s published literature in relation to the goods current at the date hereof and made available to the buyer and that the goods are of merchantable quality. II) The application, use and processing of the goods is the absolute writing or by way of trials or tests, is given without warranty as to the suitability of the goods for their intended purposes and applications. III) The buyer shall be deemed to have examined the goods at the time of delivery and unless notice of any defect is given by the buyer and received by the seller within 14 days after delivery the seller shall be relieved and discharged from any liability in respect thereof. IV) The foregoing paragraphs inclusive shall apply save that if any act of parliament or other statutory provisions for the time being in force shall avoid or make enforceable any of the provisions thereof such paragraphs shall be deemed to apply with the exclusions of those provisions thereof which shall be void or enforceable as aforesaid. 8. Patents and Trade Marks I) No warranty or representation is given by the seller that the goods do not infringe any letters patent, Trade Marks, registered designs or other industrial rights.
9. Assignments
which these conditions form part is personal to the buyer who shall not assign the benefit thereof without the seller’s written consent. 10. Proper Law The construction, validity and performance of this contract shall be governed by the law of England. 11. Property and Risk I) Delivery of the goods shall be: A) Where the seller undertakes delivery of the goods when they are loaded off the seller’s vehicle, ship or other transport at the station port or address specified by the buyer, B) Where the buyer undertakes to collect the goods, when they are loaded onto the buyer’s vehicle or other transport at the address of the seller. II) Passing of property:
Vent as,Ser vi ci osalCl i ent eyMar ket i ng
T - +52( 272)7289381
cont act o@vdsmx. com www. vdsmx. com
Solutions in Metal
Stay up to date with ISC e-Mail Alerts!
relevant to your chosen industry.