Cable and Earthing Connectors

V17 Series

VISION

TM

Cable and Earthing Connections High Quality

Cutting Edge Design

Purpose Designed Tools

VisionTM Products (Europe) Ltd.

IEC Connectors V17-030 Plug

IEC TV Male Brass/Nickel

V17-021 Plug

IEC TV Male Aluminium

V17-022 Adapter

V17-023 Adapter

V17-024 Adapter

V17-025 Plug

V17-026 Adapter

V17-027 Adapter

IEC TV Female to F Male

IEC TV Female to IEC TV Female

IEC TV Male to F Female Alloy

IEC TV Female to F Male Quick Fit

IEC TV Male Crimp

IEC TV Male to F Female Brass

V17-028 Adapter IEC TV Male to IEC TV Male

VisionTM Products (Europe) Ltd.

BNC Connectors V17-053 Adapter

V17-052 Plug

V17-055 Plug

V17-054 Adapter

BNC Male to F Female

BNC Male Solderless

BNC Male Twist On

BNC Male to IEC TV Female

V5 Multicore Cable

V4 Multicore Cable

V5-500LSF

V4-400LSF

Industry Standard Coding

Industry Standard Coding

For Satellite and Terrestrial IRS

On signal cables of - Red Vertical High - Black Vertical Low - Yellow Horizontal High - Green Horizontal Low - White Terrestrial

Integral Earthing

For Satellite Only IRS

On signal cables of - Red Vertical High - Black Vertical Low - Yellow Horizontal High - Green Horizontal Low

Colour Coded green and yellow

Tough Protective PVC Sheath

Integral Earthing Colour Coded green and yellow

Tough Protective PVC Sheath

For long service life

For long service life

LSF Rating

For compliance to regulatory requirements

LSF Rating

For compliance to regulatory requirements

Earthing Connectors V17-063A F-Connector Module V17-063B Earth Rod and Clamp Screw Boss

locks module in place

Different Number

of modules can be placed on earth rod to suit range of equipment

Fast Fit

F-connectors make fitting extremely easy

Modules Slide

independently to cope with configuration of equipment from all manufacturers

Earth Clamp

Features Hex Nut for professional installation on any brand of Multiswitch or Amplifier

Š2006 Vision Products (Europe) Ltd. Reproduction Prohibited. All offers subject to availability and may be changed without prior notice. All prices exclude VAT, CP&I and E&OE. Offer good while stocks last. Terms apply.

Š VisionTM Produ

www.vision-products.co.uk

Connector Miscellany Crimp Connector Compatibility

Adapter Reference Chart

Heavy Duty Jaws Make short work of even professional thick wall F-connectors

F Type Male Std F Type Male Standard

V17-026 V17-027

IEC TV Male

Large 0.455" Jaw

IEC TV Female

Female

V17-004 V17-020

F Type Male Quick

V17-100

Male

V17-003

Small 0.333" Jaw

Medium 0.368" Jaw

Male Quick

V17-009 V17-006 V17-005 V17-011

F Type Female Standard

V17-101 V17-025

Female Std

IEC TV

V17-023

V17-022

BNC Male

V17-028

V17-053

V17-024

V17-054

V17-125 V17-125RP V17-167

How to fit an F-Connector Using a suitable pair of cable cutters, create a clean and square cut cable end.

Using a two bladed cable-stripping tool, insert the cable until it is flush with the side of the tool. Rotate the cable stripper clockwise around a few times to ensure a clean cut through the outer sheath and the dielectric. The tool may need to be adjusted to suit your cable. Pull the tool away from the cable removing waste material.

Step-by Step Guide 1

7mm 7mm

Using a two bladed cable stripper, strip the cable so that the dielectric and outer sheath are removed without damaging the foil or braid screen. You should be left with a distance from the top of the centre core to the outer sheath of approximately 14mm.

Fold the braid back carefully making sure that the braid is pulled back over the outer sheath. This will be gripped by the connector when crimped.

3

TIP: To help smooth the foil use the Vision connector and put it on upside down and rotate it round twice. This will help flatten the foil down to ensure a smooth and easy fit.

TM

Now place the Vision connector on the correct way round using a light twisting action. The sleeve inside the F-connector should slide between the braid and the foil screen. Push the cable into the connector until the exposed dielectric is flush with the internal body of the connector.

TM

Using a crimping tool with appropriate jaw size place the connector in the jaw of the tool so it sits on the last rib of the connector. Squeeze the tool firmly until the jaws are closed.

Release the crimping tool and the F-connector should be crimped securely and neatly.

cts (Europe) Ltd.

4

Braid Foil

F-Connectors V17-003 Adapter

V17-004 Adapter

V17-005 Adapter

V17-006 Adapter

V17-007 Cap

V17-008 Cap

V17-009 Adapter

V17-010 Plug

V17-011 Adapter

V17-020 Adapter

F Female to F Female

F Male to F Male Quick Link

F Male Terminator 75 Ohm DC Pass

F Male to F Male Nutted

F Male to IEC TV Male

F Male Quick to F Female

F Male Right Angle to F Female

F Male Terminator 75 Ohm DC Block

F Male Twist 125 Reducing Pin

F Male to F Male Quick Fit

F-Connectors V17-001 Plug

V17-002 Plug

V17-167 Plug

V17-100 HQ Plug

F Plug Twist 100

F Plug Crimp 167

F Plug Twist Long Body 100

V17-101 Budget Plug

F Plug Crimp 100 with O Ring

V17-125RP Plug F Plug Crimp 125 Reducing Pin

V17-125 Plug F Plug Crimp 125

Earthing Strap V17-060 For Aerial and Satellite Masts

Durable Construction Copper plated brass

Adjustable

To fit mast diameters 25-60mm

Earth Tag

For low resistance earth connection

Cable and Earthing Connectors Also available:

Coaxial Cable Tester provides audible and visible identification of cabling short circuits

Ingenious F-spanner tightens F-connectors in place and reaches past obstructions

Vision Products (Europe) Ltd Bloxham Mill Barford Road Bloxham, Banbury Oxfordshire, OX15 4FF Switchboard: Fax:

01295 724252 01295 724253

www.vision-products.co.uk

VISION

TM

©2006 Vision Products (Europe) Ltd. Reproduction Prohibited. All offers subject to availability and may be changed without prior notice. All prices exclude VAT, CP&I and E&OE. Offer good while stocks last. Terms apply.

© VisionTM Products (Europe) Ltd.