CEAS 2015: Conference programme Technical sessions Main Auditorium Monday 7 September 2015
Senate room
van Hasselt room
Commission room 3
Commission room 2
Commission room 4
10:00 - 11:00
Opening ceremony
11:30 - 12:30
Keynote 'Challenges for the European Aeronautical Industry' Axel Flaig, Head of R&T Airbus & Hans Buethker, Chairman & CEO Fokker Technologies
13:30 - 14:30
Keynote 'Challenges for European Access to Space' Franco Ongaro, Director TEC & head ESA-ESTEC & Arnaud de Jong, CEO Airbus Defense and Space Netherlands
14:30 - 16:00
EU-project Pulsed Chemical Rocket with Green High Performance Propellants (PulCheR) workshop
Eco Design & Space
Aircraft Design Methodology 1
Flight Control 1
Aerodynamics
Remotely Piloted Aircraft Systems 1
62 Ecodesign for space and aerospace: what happens when we make ecodesign relevant for demanding applications?
41
187
37
18
A multidisciplinary design optimization advisory system for aircraft design
Continuous Measurement of Perceived Visual/Inertial Motion Coherence in a Motion Simulator
Fuselage aerodynamic drag prediction method by cfd
Comparative study of European RPAS regulations
Brief overview of the PulCheR Project
Hoogreef, Maurice (Delft University of Technology)
Cleij, Diane (Max Planck Institute for Biological Cybernetics)
Della Vecchia, Pierluigi (University of Naples Federico II"")
Cuerno-Rejado, Cristina (Technical University of Madrid)
Angelo Pasini (Sitael S.p.A.)
Pettersen, Johan Berg (Asplan Viak)
1
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room Venrooij, J. (Max Planck Institute for Biological Cybernetics), Pretto, Bergsdal, H. (Asplan P. (Max Planck Viak), Bjørnbet, M.M. Institute for Biological (Sintef Raufoss D'Ippolito,R. (Noesis Cybernetics), Pool, Manufacturing), Silva, Solutions), La Rocca, D.M. (Delft University E.J. (ISQ), Ringen, G. G. (Delft University of of Technology), (Sintef Raufoss Technology) Mulder, M. (Delft Manufacturing), University of Estrela, M.A. (ISQ) Technology), Bülthoff, H.H. (Max Planck Institute for Biological Cybernetics) 140 125 87 Eco-Space Project - Environmental Impact of new technologies
Global-local Knowledge Coupling to Support Airframe Design
On the minimization of cruise drag due to pitch trim
Saint-Amand, Maud (Airbus Defence and Space)
Wang, Haiqiang (Delft University of Technology)
Campos, Luis (Instituto Superior Técnico)
2
Commission room 3
Commission room 2
Nicolosi, F., Ciliberti, D., Cusati, V. (University of Naples)
Cresto Aleina, S., Viola, N. (Politecnico di Torino)
74 21 Numerical and Experimental Design of UAV for Investigations on photogrammetric Subsonic Air Intakes mission in Antarctic with Serpentine area Ducts for UAV Configurations GoetzendorfBerens, Thomas (Airbus Grabowski, Tomasz Defence and Space) (Warsaw University of Technology)
Commission room 4
High frequency pulses: a feasible way of making propulsion?
Angelo Pasini (Sitael S.p.A.)
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Commission room 3
Commission room 2
Ouziel, J.O. (Airbus Defence & Space)
La Rocca, G. (Delft University of technology), Nicolosi, F., Attanasio, L. (University of Naples Federico II"")
Marques, J.M.G.M. (Instituto Superior Técnico)
Delot, A.L. (ONERA), Tormalm, M.M. (Swedish Defence Research Agency (FOI)), Ruiz-Calavera, L.P., Funes-Sebastian, D.E. (AIRBUS Defence and Space), Rein, M. (DLR), Säterskog, M. (SAAB AB, Aeronautics)
Rodzewicz, M.R. (Warsaw University of Technology)
228
194
147
133
Introducing ecodesign to ESA - An overview of the activities towards a coherent ecodesign approach
An advanced aircraft design framework for aircraft preliminary design and optimization
Feasibility Study for a Tailless Aircraft with Post Stall Maneuvering Capability
Aerodynamic Validation of a Parametric Airfoil Description
Huesing (European Space Agency)
De Marco, Agostino (University of Naples Federico II"")
Krus, Petter Melin, Tomas (Linköping University) (Linköpings Universitet)
-
Kozakiewicz, A.K., olejnik, A.O. (Military University of Technology)
Hajduk, J.H. (Air Force Institute of Staack, Munjulury, Gårdhagen, R. Technology), R.C., Melin, T (Linköpings Universitet) Rodzewicz, M.R. (Linköping University) (Warsaw University of Technology)
3
23 Methods of flightpath planning for UAV photogrammetry missions with consideration of aircraft dynamic properties Glowacki, Dominik (Warsaw University of Technology)
Commission room 4
High frequency pulses: a feasible way of making propulsion?
Angelo Pasini (Sitael S.p.A.)
CEAS 2015: Conference programme Technical sessions Main Auditorium Life Cycle 16:30 - 18:00 Assessment 145 Integrating sustainability in the design of space activities: development of eco-design tools for space projects
Senate room Aircraft Design Methodology 2 1
van Hasselt room
Commission room 3
Flight Control 2
Flow Control
54
Methodology for the Validation of Loads in Rational Turning Analysis
Open Cavity Flow Control Using Simultaneous Jets at the Separation and Impingement Edges
Chanoine, Augustin (Deloitte)
Chorro Martínez, José Manuel (Airbus Defence and Space)
Al Haddabi, Naser (University of Glasgow)
Le Guern, Y., Witte, F. (Deloitte)
Parra Adan, S., Martínez Pérez, A.D., Gómez Viñas, J.E., Juan Antonio, J.A. (Airbus Group), Tito Carrillo, J. (Sertec)
-
237 Developing a standardised methodology for space-specific Life Cycle Assessment
49 Collaborative aircraft design using an integrated and distributed multidisciplinary product development process
Commission room 2 Remotely Piloted Aircraft Systems 2 69
75 Aerodynamic modelling of an active flow control Decision making for system for flapless unmanned flight in flight control in the icing conditions preliminary design stages Stadlberger, Korbinian Armanini, Sophie (Technische Universität (Delft University of München) Technology)
Commission room 4 PulCheR workshop
Green propellants: alternative to Hydrazine and its derivatives
Angelo Pasini (Sitael S.p.A.)
Hornung, M. Lucas, A. (AOS (Technische Universität Group), Whidborne, JF München) (Cranfield University)
163
117
71
A semi-empirical methodology for balanced field length estimation of jet-engined aircraft in early design phases
Assessment of Pulsed-Jet Actuators to Increase Maximum Lift of a Mid-Range Aircraft
RPAS Systems Overview and Configuration Tool
4
Green propellants: alternative to Hydrazine and its derivatives (continued)
CEAS 2015: Conference programme Technical sessions Main Auditorium Austin (European Space Agency)
-
241
?
? (European Space Agency)
-
Senate room Moerland, Erwin (German Aerospace Center DLR)
van Hasselt room Angeiras, Tulio (Embraer)
Commission room 3 Vos, Roelof (Delft University of Technology)
Commission room 2 Gruber, Mario (Fach Hochschule Joanneum)
Commission room 4 Angelo Pasini (Sitael S.p.A.)
Daoud, F. (Airbus Defense & Space), Nagel B. (German Aerospace Center DLR)
Orra, T.H. (Embraer), Paula, A.A., Mattos, B.S. (Instituto Tecnológico de Aeronáutica - ITA)
Bertels, F. G. A., Van Dijk, R. E. C. (Delft University of Technology TUD)
Flühr, H.F., Kainrath, K.K., Jelinek-Nigitz, H.J. (FH Joanneum), Fortner, R.F., Ritzinger, M.R. (AAI – Austrian Aeronautics Industries Group)
150 Development of a certification module tailored to Aircraft Multi Disciplinary Optimization
186
201
81
Online Parameter Estimation for Envelope Expansion
Future wing Hybrid Laminar Flow Control suction system design and analysis
Progress in Inverted Joined Wing Scaled Demnostrator Programme
Green propellants: alternative to Hydrazine and its derivatives (continued)
Nusrath, Khadeeja (NAL)
Alderman, James (Airbus Group Innovations)
Galinski, Cezary (Institute of Aviation)
Angelo Pasini (Sitael S.p.A.)
-
Hajduk, J.H. (Air Force Institute of Technology), Rodzewicz, M.R. (Warsaw University of Technology)
Schmollgruber, Peter (ONERA)
Bartoli, N. (Onera), Gourinat, Y. (ISAE)
Basappa, K., Jatinder, Singh (NAL)
Tuesday 8 September 2015
5
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt Commission Commission Commission room room 3 room 2 room 4 Keynote 'Challenges to the European Airlines' Athar Husain Khan, CEO Association of European Airlines AEA & Peter Hartman, Vice-chairman Board of AirFrance/KLM
Air Transport 1
Aircraft Design: Configurations
Guidance & Navigation
Impact of Rockets on Atmosphere
67
91
174 A High-Precision Position Turn-Table as the Reference for Angular Accelerometer Calibration Experiment
154
08:00 - 09:00 09:00 - 10:30
Understanding Fleet Impacts of Formation Flight
Jumbo City Flyer
Boling, Bryan ()
Gangoli Rao, Arvind (Delft University of Technology)
Jatiningrum, Dyah (Delft University of Technology)
Liu, Y. (RWTH Aachen University)
Eitelberg, G (DNWGerman-Dutch Wind Tunnels)
Lu, P., De Visser, C.C., van Paassen, M.M., Mulder, M. (Delft University of Technology)
-
170
188
6
Impact of rocket launches on chemical and aerosol composition of the atmosphere
Space CEAS Trustee Board Sustainability panel meeting session
Panel session with the participation of
Sofiev, Mikhail (Finnish Meteoeological Institute) Wood, C (Finnish O. Sanchez (EU Meteorological Interparliamentary Institute), Vira, J., Space), K.-U. Schrogl Kouznetsov, R. , (UN COPUOS, Legal), Tarvainen, V. (Finnish J.-J. Tortora Meteorological (Eurospace), Institute), Grenard, Th.Pesquet & H. Posch P., Ordonneau, G (ESA) (ONERA) 213
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
-
Aerodynamic Design and Shape Optimization of Transonic JoinedWing Civil Transport
Methods and facilities to be used to evaluate the aircraft flight and navigation equipment in flight tests
-
Zhang, Mengmeng (Royal Institute of Technology)
Yakushev, Vyacheslav (Central Aerohydrodynamic Institute TsAGI)
-
Rizzi, R. A. (Royal Institute of Technology), Nangia, R. K. N. (University of Bristol)
-
171
-
-
van Hasselt room
Harin, E.G., Kopylov, I.A. (Flight Research Institute)
199 Implementation of Characteristics of GNSS-based RNAVlocked and freeflight procedures – wheeling ducted fan quantification of based on wind potential benefits tunnel tests and CFD for business analyses aviation users Rodzewicz, Miroslaw BÜck, Philipp (Warsaw University of (Intraplan Consult) Technology) 7
Commission room 3 Dispersion and chemical composition of Athena II rocket plumes: Model simulations versus in-situ aircraft measurements
Commission room 2
Panel session (continued)
Bekki, Slimane (OVSQ) Cariolle, D.C. (CERFACS), Guenot, L.G. (Herakles), Murray, N.M. (ESA/ESTEC), Toumi, R.T. (Imperial College) 233 Findings and conclusions from the AtILA project
Murray (European Space Agency)
Panel session (continued)
Commission room 4
CEAS 2015: Conference programme Technical sessions
11:00 - 12:30
Main Auditorium
Senate room
-
Bogdanski, Krzysztof. (Warsaw University of Technology)
Air Transport 2
Aircraft Design: Fundamentals
98
34
Autonomous flying: a must for the future
Analysis Of Aircraft Configurations Including Propagated Uncertainties
Graaff, Adriaan (AD Cuenta)
Pfeiffer, Till (German Aerospace Center DLR)
van Hasselt room
Commission room 3
Schubert, M. (Intraplan Consult GmbH)
-
Handling Qualities
Advanced Manufacturing for Space Applications 1
52 Use of simulator motion feedback for different classes of vehicle dynamics in manual control tasks Lu, Tao (Delft University of Technology)
-
Moerland, E., Bรถhnke, D. (German Aerospace Center DLR)
Pool, D.M., Damveld, H.J., van Paassen, M.M., Mulder, M. (Delft University of Technology)
112
-
58
8
159 Optimisation of spacecraft component topology and functionality through additive manufacturing Curtis Rouse, Mike (STFC) Scott, A.S. (RAL Space, STFC), Collingwood, CC (STFC), Vick, V.S. (UK Astronomy Technology Centre), Greenway, P.G., Ward, K.W. (RAL Space, STFC) 208
Commission room 2
Commission room 4
ESA Reusable Launch Vehicle Program panel session
CEAS Trustee Board meeting
IXV project from conception to realization and follow-on
IXV Project Team
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Economical Assessment of Commercial HighSpeed Transport
-
Rotorcraft-Pilot Coupling Research in Europe: A Success Story in Collaboration
Margaretic, Paula (Airbus Operations)
-
Dieterich, Oliver (Airbus Helicopters Germany)
Steelant, J.S. (Johan Steelant)
-
127
206
Commission room 3 New green polymer composites processed by Additive Manufacturing for “clean space” applications Rinaldi, Marianna (University of Rome Tor Vergata"")
Cacciotti, I. (University of Rome Niccolò Cusano""), Pambaguian, L., Ghidini, T. (European Pavel, M.D. (Technical Space Agency ESAUniversity of Delft) ESTEC), Canala, V., Massarelli, V. (Mecaer Aviation Group), Nanni, F. (University of Rome Tor Vergata"") 134 222
9
Commission room 2 IXV project from conception to realization and follow-on (continued)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium Clusterization of airport cities and cluster dynamics for an air passenger demand network topology forecast based on socio-economic development scenario Terekhov, Ivan (German Aerospace Center DLR)
Gollnick, V G (DLR, Air Transportation Systems)
13:30 - 14:30 14:30 - 16:00
Air Traffic Control 1 29
Senate room
van Hasselt room
Commission room 3
Commission room 2
IXV project from conception to realization and follow-on (continued)
Statistical Time and Market Predictive Engineering Design (STAMPED) Techniques for Preliminary Aircraft Sizing
A distributed simulation framework for rapid deployment of research demonstrators
Additive Manufacturing for Space applications on European Space Programs
Barrett, Ronald (The University of Kansas)
Entz, Ricardo (Airbus Defence and Space)
Bonvoisin (European Space Agency)
-
Tressoldi Moreira, Fernandes de Oliveira, Schubert, Dickmanns, Stenzel, Scherer, Schwening (Airbus Defence and Space GmbH)
-
Keynote 'Challenges in realizing a Single European Sky’ Florian Guillermet, Director SESAR JU & Paul Riemens, CEO LVNL Aircraft Design: Wind Tunnel Wall Space Technologies Measurement Wing & Tail Interference 1 Techniques 63 102 229 14
10
Commission room 4
CEAS Trustee Board meeting
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Commission room 3
Commission room 2
ESA Technology Programmes
Surface pressure measurements at a Lambda wing at steady and pitching angle of attack at vortex dominated flow including transonic effects
Developing Generic Flight Schedules for Airport Clusters
Study of a Simplified Methodology for a Flexible Wing Design
Wind tunnel model support and wall interference corrections in DNW-HSTensuring high data quality standards -
BieĂ&#x;lich, Peter (Hamburg University of Technology)
Garcia, Luis Eduardo (Embraer)
Wubben, Frenk (German-Dutch Wind Tunnels DNW)
Becker, Udo (European Space Agency)
Gollnick, V.G. (Hamburg University of Technology)
Antunes, A. P., De Paula, A. A. (EMBRAER)
Takara, E.K. (Embraer)
-
100
123
116
230
11
Wiggen, Stefan (German Aerospace Center DLR) Klein,C. (DLR/ Institute of Aerodynamics and Flow Technology), Sachs, W. (DLR/ Institute of Aerodynamics and Flow Technology), Henne, U. (DLR/ Institute of Aerodynamics and Flow Technology), Nuhn, J. (DLR/Institute of Aeroelasticity) -
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Senate Auditorium room Integration of Mission Trajectory Design Methodology Management for Trailing-Edge functions into High-Lift CleanSky Mechanisms Technology Evaluation Process Cadot-Burillet, Delphine (Airbus Operations)
Albert, M.A. (Airbus Operations)
110 Decision-making inconsistencies in ATC: an empirical investigation into reasons for rejecting decision support automation
Vos, Roelof (Delft University of Technology)
Zaccai, D. (Delft University of Technology TUD)
191
van Hasselt room
Commission room 3
Commission room 2
Investigations of ETW slotted wall interference using the NASA CRM model
Technology Transfer: The impact os Space Solutions on Terrestrial Applications
-
Kursakov, Innocentiy (Central Aerohydrodynamic Institute TsAGI)
Diaz, Lluc (European Space Agency)
Seyfang, George (Formerly @ BAE Systems)
-
-
231
220
Horizon 2020
Dynamic Measurements on the NASA CRM Model tested in ETW
Bosnyakov,S.M., Glazkov, S.A., Gorbushin, .A., Lysenkov, A.V., Matyash, S.V., Semenov, A.V. (Central Aerohydrodynamic Institute) 169
Integration of a High-fidelity Guidance for scaled Methodology for model testing on Tailplane Design into regional jet design a Transport Airplane Calculator
12
Commission room 4
CEAS 2015: Conference programme Technical sessions
16:30 - 18:00
Main Auditorium
Senate room
Westin, Carl (Delft University of Technology)
Mattos, Bento (Instituto Tecnológico de Aeronáutica)
Borst, C. (Delft Technical University), Hilburn, (Center for Human Performance Research)
Secco, N.R.S., Paula, A.A (Instituto Tecnológico de Aeronáutica)
van Hasselt room Portolon da Silva, Tiago (Instituto Tecnológico de Aeronáutica) Agrico de Paula, A.A.P. (Instituto Tecnológico de Aeronáutica)
EU ESWIRP project - Turbulent / Laminar Flow Testing 141 138 26 An ecological Experimental A Methodology to flow-based Investigation of Enable Automatic 3D decision support Small Scale Routing of Aircraft tool for future 4DHomogeneous Electrical Wiring trajectory Isotropic Interconnection management by Turbulence in Systems air traffic control S1MA wind tunnel Klomp, Rolf (Delft Zhu, Zaoxu (Delft Bourgoin, Mickael University of University of (LEGI / CNRS) Technology) Technology) Air Traffic Control 2
142
Aircraft Systems 1
La Rocca,G. (), J.L. van Baudet, C.B., Tooren, M. (University Mordant, N.M. (LEGI / of South Carolina) CNRS) 177
113
13
Commission room 3
Commission room 2
??? (EC)
Hensch, Ann-Katrin (European Transonic Windtunnel ETW)
-
Quix, H. (ETW)
Advanced Manufacturing for Space Applications 2 224
Remotely Piloted Aircraft Systems 3 109
Characterisation of Material Demisability for Spacecraft Components
Visual tracking of ground and air targets
Merrifield (Fluid Gravity Engineering)
Gafurov, Salimzhan (Samara State Aerospace University)
-
Zakharov, K. (Samara State Aerospace University)
225
120
Commission room 4
CEAS Trustee Board meeting
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Solution SpaceBased Complexity Metric for ATC
An optional APU for passenger aircraft
Mercado Velasco, Gustavo (Delft University of Technology)
van Hasselt room Wind Tunnel Test For Breakthrough Laminar Aircraft Demonstrator Europe at DNW-LLF
Scholz, Dieter Artois, Koen (German(Hamburg University of Dutch Wind Tunnels Applied Sciences) DNW)
Borst, C. (Delft University of Technology)
-
179
185
Bil, Cees (RMIT University)
Mulder, Bram (Delft University of Technology)
Postma, J., Philipsen, I. (German-Dutch Wind Tunnels DNW)
Commission room 3 Impact of additive manufacturing on spacecraft engine design
Commission room 2 Autonomous planning and replanning of a single Unmanned Aerial Vehicle: strategies and simulations
Hyde (European Space Agency)
Fusaro, Roberta (Politecnico di Torino)
-
Cresto Aleina, S., Viola, N. (Politecnico di Torino)
181 11 184 High-Speed PIV Advanced A methodological Applied to the composite for approach for the Design, Wake of the NASA space applications: implementation and Air Traffic Flow Product CRM Model in ETW Design and evaluation of a Optimisation using Development at High Re-Number Structural Analysis system to support Wind Models Process optimization Stall Conditions for of CFRP Electronics Well Clear of aircraft Sub- and Transonic Housing components Speeds
Konrath, Robert ()
14
Voicu, Raluca (Romanian Research and Development Institute for Gas Turbines COMOTI)
Theunissen, Erik (Netherlands Defence Academy)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
La Rocca, G. (Delft Assaad, Z., Eberhard, University of A., Moore, M. (RMIT Technology), De Jong, University) H., Van der Elst, S. (KEworks) 18:30 - 20:00
Aeroelasticity
Detailed Aircraft Design
96
17
Automatic Generation of Design and analysis Aeroelastic of the control and Simulation Models stability of a Blended Combined with a Wing Body aircraft Knowledge Based Mass Prediction
van Hasselt room
-
Prognostics and Health Management 24 Impacts of a Prognostics and Health Management System on Aircraft Fleet Operating Cost during Conceptual Design Phase by using Parametric Estimation
Commission room 3
Commission room 2
-
Suarez, B (General Atomics Aeronautical Systems Inc.)
Complex Flows
Clean Sky
50
44
Aerodynamic interaction between ground vortex and propeller investigated by experiments and CFD
Clean Sky Technology Evaluator – Air Transport System assessments
Merino Martinez, Roberto (Polytechnic University of Madrid UPM)
Fioriti, Marco (Politecnico di Torino)
Yang, Yannian ()
Junior, Alf (German Aerospace Center DLR)
Petersson, Ă–, Daoud, F (Airbus Defence and Space)
-
Pavan, G. (Alenia Aermacchi), Corpino, S., Fusaro, R. (Politecnico di Torino)
Eitelberg, G., Veldhuis, L. (Delft Univwersity of Technology)
-
164
165
168
146
248
Maierl, Reinhold (Airbus Defence and Space)
15
Commission room 4
-
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Aeroelastic Concepts in Civil Aircraft Wings Design
Knowledge-based Integrated Aircraft Windshield Optimization for Conceptual Design
Mazidi, Abbas (Yazd university)
Munjulury, Raghu Chaitanya (Linköping University)
Fazelzadeh, S.A., Ranjbar, A. (Shiraz university)
Gårdhagen, R., Berry, P, Krus, P (Linköping University)
Pavan, G. (Alenia Aermacchi), Chiesa, S., Fusaro, R. (Politecnico di Torino)
217
196 Landing Gear Conceptual Design and Structural Optimization of a Large Blended Wing Body Aircraft
175 182 Potential benefits of Prognostics and The influence of the Health drag dynamic stall in the vawt starting Management in conceptual aircraft efficiency design
Aerial Delivery dynamic model validation by Flight Test
van Hasselt Commission room room 3 Expanding customer services perimeter: from Development of strategy to technology and the Flow Structures in the Near-Field other way around. The case of Health Wake Region of the Common Research and Usage Model Monitoring Systems (HUMS) in the management of missiles stockpiles Zimmermann, DinaNicolay, Alexis (MBDA Marie (University of France) Stuttgart)
16
Waldmann, A., Lutz, T., Krämer, E. (University of Stuttgart)
Commission room 2
People, Planet, Profit: the Making of the Clean Sky 2 PPP
van Manen, Ron (Clean Sky JU)
-
-
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Oliver, Mercedes (Airbus Defence and Space)
Cumnuantip, Sunpeth (German Aerospace Center DLR)
Pérez, A.P., Rodríguez, A.J. (ALTRAN), Climent, H.C. (Airbus Defence and Space)
-
van Hasselt room
Commission room 3
Commission room 2
Malael, Ion (Romanian Research and Development Institute for Gas Turbines COMOTI)
-
Dragan, V., Gherman, Torhorst, S. (Collège B. (Romanian des Ingénieurs), Research & Meyer, H., Gollnick, V. Development Institute (DLR - German for Gas Turbines Aerospace Center) COMOTI)
-
Hölzel, Nico (German Aerospace Center DLR)
Commission room 4
Wednesday 9 September 2015 08:00 - 09:00
09:00 - 10:30
Keynote 'Challenges to the European Aerospace Research and Infrastructure' Eric Dautriat, Executive Director CleanSky, Rolf Henke, Member DLR Executive Board & Michel Peters, CEO NLR
EU ESWIRP project - Wind Tunnel Upgrades
10 ESWIRP: European Strategic Wind tunnels Improved Research Potential – Program Overview
Aircraft Systems 2
Structural Design 1
Advanced Manufacturing for Space Applications 3
27
15
221
Thermal Properties of C919X EHAs Operating During Whole Flight Envelope
Development of Additive layer laser beam welding manufacturing of concepts for monolithic catalyst fuselage panels bed
17
International collaboration
40 Overall view of the European Collaboration in Aeronautics Research within GARTEUR
EU-project INcreasing young women's participation in Science Studies and in the Aeronautic Industry (IN2SAI) panel session
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Boyet, Guy (ONERA)
Fu, Yongling (Beihang University)
-
53 Mach number control improvement in ONERA s1ma large sonic wind tunnel Crozier, Pascal (ONERA)
Han, X., Qi, X.Y. (Beihang University), Wang, L.J. (COMAC)
57 Preliminary Design Rules for Electromechanical Actuation Systems – the Effects of Saturation and Compliances Fu, Jian (Institut Clément Ader, INSA)
van Hasselt room Kashaev, Nikolai (Helmholtz-Zentrum Geesthacht)
Commission room 3
Commission room 2
Essa (University of Birmingham)
Consigny, Hervé (ONERA)
Riekehr, S., Falck, R., Enz, J. (HelmholtzZentrum Geesthacht), Robson, J., Tian, Y. (The University of Manchester, School of Materials), Karanika, A. (Hellenic Aerospace Industry S.A., Research and Product Design)
-
Vasseur, O., Delot, A.L. (ONERA)
48
223
114
Robust Aircraft Rotation Planning using Stochastic Optimization
Additive manufacturing of space propulsion hardware
Future of Aviation
Kölker, Katrin (German Aerospace Center DLR)
Smith (European Space Agency)
Szodruch, Joachim (IFAR)
18
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Chargy, C., Pichon, R. (ONERA)
Hazyuk, I., Maré, J.C. (Institut Clément Ader, INSA)
118 DNW innovations in wind tunnel testing - New moving belt system for Large Low speed Facility Hermans, Christophe (German-Dutch Wind Tunnels DNW)
-
192
van Hasselt room Wenzel, S.W. (DLR), Zeile, C.Z. (GeorgAugust-University Göttingen), Westphal, S.W. (Technical University Clausthal), Marco, M.B. (Technical University Clausthal), Lütjens, K.L. (DLR) 83
Commission room 3
Commission room 2
-
Shin, Jai (NASA), Nakahashi, K.N. (Japan Aerospace Exploration Agency)
242
247
The implications of aerospace requirements on the design-space of a permanent magnet starter/generator
FEM analyses of joined wing aircraft configuration
?
Future Sky
Brink, Emile (Aeronamic)
Mieloszyk, Jacek (Warsaw University of Technology)
? (European Space Agency)
Eijssen, Paul (EREA)
-
-
Gerber, M. (Aeronamic), Geest, M. (Technische MSc Kalinowski, M. Universiteit Delft), (Warsaw University of Zeilstra, D. Technology) (Aeronamic), Boer, A. (NLR)
19
Commission room 4
CEAS 2015: Conference programme Technical sessions
11:00 - 12:30
Main Auditorium EU ESWIRP project - NASA Common Research Model 103
Senate room Multi-Disciplinary Design 43
Validation of Fluid- Cooling channel flow Structure Coupled characterization Wing Deformation using Particle Image Velocimetry and Simulations for the NASA Common Laser Induced Research Model Fluorescence Keye, Stefan (German Aerospace Center DLR)
Rochlitz, Henrik (TU Braunschweig)
van Hasselt room Structural Design 2 3 Ground Test Vibrations as nonconservative mean of compliance for vibration airworthiness requirements of A/C mechanical systems design Palomares, Angel (Airbus Defence and Space)
Rudnik, R. (DLR)
Scholz,P.S. (TU Braunschweig)
-
158
95
107
Commission room 3
Commission room 2
Commission room 4
Re-entry assessment
Space Technologies 2
IN2SAI panel session
99
234
Development of a Break Up Re-Entry Sensor
European Space Technology Harmonisation
Greger, Ralf (RUAG Space)
Williams, Edmund (European Space Agency)
Murray, N.P. (ESA), Benkeser, C., Coppoolse, W. (RUAG Space), Prof. Roesgen, T. (ETH), Weihs, H., Dittert, C. (DLR) 173
20
-
235
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Using wing modal deformation for improvement of CFD results of ESWIRP project
Multidisciplinary design optimization of flight control system parameters in consideration of aeroelasticity
Modeling method of strength analysis for thin-walled structure
RADID – Vehicle Design Optimization for Demise and Destructive Reentry Assessment
Vrchota, Petr (Aeronautical Research and Test Institute)
Nussbächer, Daniel (Airbus Defence and Space)
Wang, Zhijin (Nanjing University of Aeronautics and Astronautics)
Weikert, Sven (Astos Solutions GmbH)
Prachar, A.P. (Aeronautical Research and Test Institute)
161 Analysis of the NASA Common Research Model European Transonic Wind Tunnel Test Data and NASA Test Data
van Hasselt room
Hanel, M., Daoud, F. (Airbus Defence and Space), Hornung, M. (Technical University of Munich)
Kang, Longhui, Kretov, A.S., Huang, Sheng
115
198
Integrated multidisciplinary engineering solutions at Fokker Aerostructures
Citric acid aerospace stainless steel passivation: a green approach
21
Commission room 3
Commission room 2 Identifying trends in space technology - an industry perspective & The added values of SME's in Europe's Space R&D programmes Lionnet, Pierre (Eurospace), Bracquene, Hans (SME4Space)
Fritsche, B. (HTG Hyperschall Technologie Goettingen GmbH), Eggert, J., Kossev, I. (Astos Solutions GmbH), Huertas, I. (ESA / ESTEC) 243
236
A potential framework for the safe and permanent passivation of a LEO battery bus power system
France Space R&D programme & Uncover rough diamonds: Switzerland's National Space initiatives
-
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Rivers, Melissa (NASA Langley Research Center)
Berg, Tobie (Fokker Aerostructures)
Quest, J.Q. (European Transonic Windtunnel), Rudnik, RR (German Aerospace Center DLR)
13:30 - 14:30 14:30 - 16:00
van Hasselt room Bragaglia, Mario (University of Rome Tor Vergata"")
Rinaldi,M. (University of Rome Tor Vergata""), Cacciotti, Laan, A.H., Hootsmans, I. (University of Rome L.M. (Fokker Niccolò Cusano""), Aerostructures) Mori, S., Nanni, F., Montesperelli, G. (University of Rome Tor Vergata"")
Commission room 3 Alcindor (SSTL)
-
Commission room 2 Blanco, Dampier (CNES - French Space Agency), Richard, Johann (Swiss Space Office)
Commission room 4
-
Keynote 'Challenges to the European Aerospace Education' Hester Bijl, Dean TU-Delft Aerospace Faculty, Frithjof Weber, Head of Knowledge and Competence Management Airbus & Franco Bernelli, Politecnico di Milano, Aerospace Science and Technology Greenhouse Gas Maintenance Repair Future Education De-orbiting 4th IN2SAI partner Space Design 1 Emissions 1 and Overhaul and Training Needs Technologies meeting 76 Aviation – Environmental Threats Simplified methodology of NOx and CO emissions estimation
33
25
162
21st Century Skills Accelerating MRO Analysis of Electric for the Aerospace procedures for Propulsion for DeIndustry Workforce composite materials Orbiting of Sunand Their using innovative Synchronous Translation to the detection techniques Satellites Classroom
22
6 A New SDRE method to Design a Control Law for a Rigid-flexible Satellite
CEAS 2015: Conference programme Technical sessions Main Auditorium Glowacki, Pawel (Institute of Aviation)
Senate room Schoemaker, Christiaan (Hogeschool van Amsterdam)
Commission room 3 Fromm, Christian (German Aerospace Center DLR)
Commission room 2 Gadelha de Souza, Luiz (Brasilia University)
Kourousis, K.I.K. (University of Limerick)
Herbertz, A. (DLR)
-
-
128
226
56
-
Giving Space to Space: Bachelor Education in Space Engineering at Delft University of Technology
-
Cervone, Angelo (Delft University of Technology)
-
Zandbergen, B.T.C., Noomen, R., Gill, E.K.A., Mooij, E., Kamp, A. (Delft University of Technology)
Pelt, M.M.J.M., Boer, R.J., Borst, M.S. (Hogeschool van Czyz, S., Kawalec, M. Amsterdam), Groves, R.M. (Delft University of Technology) 80 Comparison of the Potential Environmental Impact Improvements of Future Aircraft Concepts Using Life Cycle Assessment Johanning, (Hamburg University of Applied Sciences) Scholz, D. (Hamburg University of Applied Sciences)
van Hasselt room Lappas, Ilias (South Wales University)
23
Time-Efficient and Accurate Architectural Performance Design and Testing Prediction and of a De-orbiting Analysis Method for Subsystem Planetary Flight Vehicles Design
Tiedemann (HPS)
Jarzabek, Artur A. (Technical University of Madrid UPM)
-
Moreno Lopez, A.I., Gonzรกlez Hernรกndez, M.A., Perales Perales, J.M. (Technical University of Madrid UPM)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium 183 Rotorcraft Noise and Emissions Reduction Process for CleanSky – The Measurement of Success
van Hasselt room 172
Commission room 3 227
Commission room 2 131
Development and Testing of Deployable Membrane for DeOrbiting Systems
Space Capsule Using Energy of Gravitational Field for Flight Control
Damage identification in composite panels using acoustoultrasonic waves
A Multidisciplinary and Practical view in Aeronautical Engineering Education
Loendersloot, Richard (University of Twente)
De Paula, Adson (Technological Institute of Aeronautics ITA)
Hahn (HTS)
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI)
Smith, C.S. (Agusta Westland), Pachidis, VP (Cranfield University), Stevens, J.S. (National Aerospace Laboratory NLR), Thevenot, L.T. (Airbus Helicopters)
-
Germano, J.S.E., Morales, M.A., Carvalho, F.C., Passador, F.E (Technological Institute of Aeronautics ITA)
-
Brasoveanu, D. (Raytheon)
Greenhouse Gas Emissions 2
Manufacturing Technology
Aircraft Design Methodology 3
Space Debris Mitigation technologies at system level
Personal Air Transport
189
111
8
207
16
D'Ippolito, Roberto (Noesis Solutions)
16:30 - 18:00
Senate room 197
24
Commission room 4
IN2SAI final conference session
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Commission Commission room 3 room 2 Contributing to Orbital Simulation Driven Sustainability with an Independent Design and Additive Environmental Manufacturing. A An automated CFD Decommissioning Next Generation prospects in new design process analysis workflow Device for Satellite Fixed-Wing aviation: a study to unleash potential in overall aircraft and Launcher Personal Aerial from the Air & Space of Additive design applications Vehicle Space Academy FC Implementing Manufacturing freedom Space Debris Mitigation Measures Cervantes Herrera, GU, Xiangyu (German Panayotov, Hristian Joselzon, Alain (Air Antonetti, Stefano (DAlejandro (Altair Aerospace Center (Technical University and Space Academy) ORBIT) Engineering) DLR) Sofia, Plovdiv Branch) Ciampa, P.D., Nagel, Ferrario, L.F., Zafirov, D.I. B. (German Rossettini, LR (D(Technical University Aerospace Center ORBIT SRL) Sofia, Plovdiv Branch) DLR) 190 167 46 238 130 European Personal AeroDesign and CO2 Emissions Transportation. Conceptual Design optimisation From Flights Airbus Defence and Using of the Method for the methodologies for Within And Double-Flutter Space Global Wing Weight Additive Layer Between Estimation of Strut Approach to Space Flight Principle for Manufacturing (ALM) Industrialised Manufacturing of Debris Mitigation Braced Wing considering States Personal FlyingAircraft uncertainties Cars by European Aircraft and Car 25
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Rigaudias, JeanBaptiste (Air and Space Academy, retired Air France VP Environment)
Azevedo, José (CEIIA)
-
Alves, N.A. (Instituto Politécnico de Leiria IPL), Santos, RS (Instituto Superior Técnico IST), Mortágua, JPM (CEIIA)
-
-
195 Micro Laser Sintering capabilities opens the door for long endurance flights supported by light weight and precise micro parts
van Hasselt room
Commission room 3
Commission room 2 Manufacturers
Duhamel (Airbus Defence and Space)
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI)
-
-
Brasoveanu, D. (Orbital ATK), Voicu, R., Deaconu, M., Cican, G., Zavodnic, F. (COMOTI)
215
239
Morphed vertical tailplane assessment for certification requirements
CleanSat
Chiozzotto, Gabriel (German Aerospace Center DLR)
26
203 Thinking out of the Box: unwrapping the ‘Flying Car’. How to combine personal transport in the air and on the road
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium -
-
Senate room Winderlich, Matthias (3D MicroPrint)
van Hasselt room Castillo-Acero, Miguel Angel (Aernnova)
Commission room 3 Soares (European Space Agency)
Goebner, J.G.. Blau, M.B.L., Weber, D.W.E., Starke, T.S.T., Schneck, M.S.C., Lehnhardt, A.L.E. (3D MicroPrint GmbH)
Cuerno-Rejado, C., Gómez-Tierno, M.A. (Escuela Técnica Superior de Ingenieros Aeronáuticos, UPM)
-
Commission room 2
Commission room 4
Jorna, Peter (PAL-V)
Dingemanse, R.D. (PAL-V)
Thursday 10 September 2015 08:00 - 09:00
09:00 - 10:30
Keynote 'Challenges to the European Air Power in Asymetric Conflicts' CDRE Peter Round, Director Capability EDA & Lt-Gen Sander Schnitger, Commander Royal Netherlands Air Force Composite Structures 1
Active Flow- Loads & Noise control on next generation wing (AFLoNext) workshop
The Future of Air Combat Systems in Europe
Active Debris Removal system studies
119
124
Green Propulsion 1
68 Experimental investigations based Envisat removal by on a demonstrator Flight-physical aspects robotic and net capture unit to analyze the and methods of future means. Results of the combustion process of military aircraft Airbus DS led e.Deorbit a nitrous oxide/ethene designs Phase A ESA study premixed green bipropellant Hitzel, Stephan Maria Estable, Stéphane Werling, Lukas (Airbus Defence and (Airbus Defence and (German Aerospace Space) Space) Center DLR) 27
European Workshop on Aircraft Design Education (EWADE) 193
The Importance Of Non-Linearities In Aircraft Preliminary Design
Nicolosi, Fabrizio (University of Naples Federico II"")
CEAS 2015: Conference programme Technical sessions Main Auditorium
36 Crash Concept for Composite Transport Aircraft Using Tensile and Compressive Absorption Mechanisms Schatrow, Paul (German Aerospace Center DLR)
Senate room
van Hasselt room
Commission room 3
Commission room 2
Commission room 4
-
Bischof, B.B., Oswald, M.O., Soppa, U.S., Axthelm, R.A., Mistritta, M.S., Voigt, P.V. (Airbus Defence & Space)
Perakis, N., Hochheimer, B.I.J., Gernoth, A., Schlechtriem, S. (German Aerospace Center DLR)
De marco, A., Della Vecchia, P (University of Naples Federico II"")
-
148
-
ANDROID Small Active Debris Removal Mission
-
Escorial Olmos, Diego (GMV Aerospace and Defence SAU)
Waimer, M. (German Aerospace Center DLR)
-
55
-
139 Pulcher-pulsed chemical rocket with green high performance propellants: second year project overview Pasini, Angelo (Alta)
Peters, T.V.P. (GMV Aerospace and Defence SAU), Naudet, J. (QinetiQ Space), Chitu, Torre, L., Pace, G., C.C. (GMV Romania), Pasini, A. (Alta S.p.A.) Sewerin, J.K., Barcinski, T. (Centrum Badari Kosmicznych Polskiej Akademii Nauk) 153
28
-
?
CEAS 2015: Conference programme Technical sessions Main Auditorium Composite laminates simulation using an enhanced peridynamics lamina formulation
11:00 - 12:30
van Hasselt room
Commission room 3
Commission room 2
Commission room 4
-
ESA’s e.deorbit mission and its roadmap to Active Debris Removal
-
?
Zaccariotto, Mirco (University of Padua)
-
Biesbroek, Robin (European Space Agency)
-
Dipasquale, D.D., Sarego, S.G., Galvanetto, G.U. (University of Padova)
-
-
-
Propeller Interactional Aerodynamics
Technologies for Active Debris Removal 1
Space design 2
77
5
Multiscale Virtual Testing – The roadmap to the efficient design of composites for Damage Tolerance
Wind tunnel high speed powered tests of the ERICA tilt rotor model in S1MA - NICETRIP Project
31 Autonomous robotic system for active debris removal: requirements, stateof-the-art and concept architecture of the rendezvous and capture (RVC) control architecture/system
Composite Structures 2
Senate room
AFLoNext workshop
29
EWADE
7
Thermally Induced Vibration Analysis of Flexible Solar Wing
?
CEAS 2015: Conference programme Technical sessions Main Auditorium Lopes, Claudio (IMDEA Materials Institute)
Falcó, O., Naya, F. (IMDEA Materials Institute), Tijs, B. (Fokker Aerostructures B.V.), González, C., Llorca, J. (IMDEA Materials Institute) 78 GARTEUR Structures & Materials Action Group 32 – An European Research Project On Damage Growth In Aerospace Composite Structures Riccio, Aniello (Second University of Naples)
Senate room
van Hasselt room
Commission room 3
Commission room 2
Lebrun, Frederic (ONERA)
Jankovic, Marko (German Research Center for Artifial Intelligence (DFKI GmbH) / University of Bremen)
Kong, Xianghong (Nanjing University of Aeronautics and Astronautics)
-
Kumar, K., (Dinamica Srl) Romero Martin, J., Vasile, M. (Strathclyde University), Ortiz Gómez, N., Walker, S.J.I. (Southampton University), Kirchner, F. (DFKI), Topputo, F. (Politecnico di Milano)
Yang, J. (RMIT University), Wang, Z. J. (NUAA)
152
135
20
COBRA contactless de-tumbling
Interactive 3D Visualization to Support Concurrent Engineering in the Early Space Mission Design Phase
APIAN-INF: a Lowspeed Aerodynamic and Aeroacoustic Investigation of Pylon – Pusher Propeller Interaction Effects Sinnige, Tomas (Delft University of Technology) 30
Peters, Thomas (GMV Deshmukh, Meenakshi Aerospace and Defence (German Aerospace SAU) Center DLR)
Commission room 4
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
-
82 CompoWorld: an innovative approach to innovation and economic development Veldman, Bouke (Stichting CompoWorld) -
13:30 - 15:00
Aeroacoustics 19
AFLoNext workshop
van Hasselt Commission Commission room room 3 room 2 Lynch,K.P., Malgoezar, A.M.N., Wolff, R., Schaus, V. Scheper, K.Y.W., Escorial Olmos, D., (German Aerospace Ragni, D., Snellen, M., Pellacani, A. (GMV) Center (DLR)) Eitelberg, G. (Delft University of Technology) 156 155 144 CFD Analysis of a How many satellites Model Based blowing pylon need de-orbit Design for system for the technologies? Future Automated System APIAN propeller in scenarios for passive Architecture pusher de-orbit devices Generation configuration Sitges de la Sotilla, Oscar (German Palla, Chiara (Cranfield Staack, Ingo Aerospace Center University) (Linköping University) DLR) Márquez Gutiérrez, C.M. (Rolls-Royce Deutschland)
Jennifer Kingston (Cranfield University)
Krus, P. (Linköping University)
Propulsion Integration 1
Technologies for Active Debris Removal 2
Green Propulsion 2
51
132
101
31
Commission room 4
?
EWADE
CEAS 2015: Conference programme Technical sessions Main Auditorium Fly-over noise sources localization and engine settings analysis using a low cost, high resolution acoustic camera Merino Martinez, Roberto (Delft University of Technology)
Snellen, M.S., MerinoMartinez, R., Simons, D.G. (Delft University of Technology TUD)
88
Senate room
van Hasselt room Mathematical Modeling Of Aircraft Gas Turbine Engine In On-Board Control System
Blyumin, Kirill (Samara State Aerospace University)
Commission room 3 Special Equipment Which Uses Concentrated Solar Light for Earth Protection Against Asteroids-Advanced Design and Technology Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI)
Gimadiev,G. (Samara state aerospace university (national Brasoveanu, D. (Orbital research university)), ATK), Anghel, O., Voicu, Nizhegorodtsev, V. R., Zavodnic, R. (Samara state (COMOTI) aerospace university (national research university)) 90
143
32
Commission room 2
Commission room 4
Green MicroResistojet Research at Delft University of Technology: the New Frontiers of Cubesat Propulsion
?
Cervone, Angelo (Delft University of Technology)
Wang, C. (Beihang University), Cordeiro Guerrieri, D., Zandbergen, B.T.C., van Zeijl, H.W. (Delft University of Technology) -
CEAS 2015: Conference programme Technical sessions Main Auditorium On thermoacoustic acousticvortical-entropy waves and flow stability
Campos, Luis (Instituto Superior Técnico) Marta, A.C.M. (Instituto Superior Técnico) 122 A new computational framework for UAV quadrotor noise prediction
Vieira, Ana (CEIIA)
Senate room
van Hasselt Commission room room 3 Increasing Air-Fuel Ratio of Clamping Mechanism Consumption of – Designing a Distributed Tentacles Based Turboelectric Capture Mechanism Propulsion for for Active Debris Blended Wing Body Removal Aircraft using Recuperator Seenivasan, Dinesh Meyer, Jan-Christian Babu (Technical (OHB System) University of Madrid)
-
149 The constructal principle and character law, hyperbolic, of natural design, a new paradigm of aerospace systems Stanciu, Virgil (University Politehnica of Bucharest)
33
Commission room 2
Commission room 4
-
?
-
Scheper, M.S. (OHB System AG), Vazquez, J.V. (SENER Ingeneria y Sistemas), Le Letty, R.L.L. (ESA)
-
240
232
Simulating and testing throw-nets for space debris removal
ESA green propulsion progress
Wormnes (European Space Agency)
Valencia-Bel (European Space Agency)
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
15:30 - 17:00
Community Noise 38 Clean Sky Technology Evaluator – Noise assessment and experience at airport level Eenige, Michel (National Aerospace Laboratory NLR)
-
39
AFLoNext workshop
van Hasselt room Pavel,C. (University Politehnica of Bucharest) Propulsion Integration 2 180
Commission room 3
Commission room 2
-
-
Space Design 3
Green Propulsion 3
94 Combined Launch Computation of System: a new Thermodynamic concept to reduce Cycle for Novel the launch costs for Detonation Aircraft Micro (Cube) Engine Satellites and Debris hunting probes
136 Propulsive performance of a c3h4/h2o2 rocket prototype for future green bipropellant thrusters
Cuciumita, Cleopatra (Romanian Research and Development Institute for Gas Turbines COMOTI)
Ahmed, Hamed (Cairo University)
Pasini, Angelo (Alta)
-
Pace, G., Torre, L. (Alta S.p.A.)
157
212
Porumbel,I. (COMOTI Romanian Research and Development Institute for Gas Turbines) 216
34
Commission room 4
EWADE
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
van Hasselt room
Commission room 3
Commission room 2
Commission room 4
Auralization of novel aircraft configurations
A Mathematical Analysis of a Hydrogen Motor Glider Drive
All moving tail plate interaction on an aerodynamic characteristic of the rocket plane in tailless configuration
Design of Valve Segment for a Hybrid Rocket Engine
?
Arntzen, Michael (National Aerospace Laboratory NLR)
Papucki, Jacek (Warsaw University of Technology)
Kwiek, Agnieszka (Warsaw University of Technology)
Rana, Usman (European Space Agency)
Bertsch, L. (DLR), Simons, D.G. (Delft Technical University)
-
Figat, M.F., Senenko, K.S. (Warsaw University of Technology)
Hink, R.(ERIG)
-
218
219
-
Analysis of the flow in a propulsion nozzle subjected to a fluid injection
Green Solid Propellants for Launchers
Wijntjes, Rik (National Aerospace Laboratory NLR)
-
Chellou, Nassir (Hassiba Benbouali University of Chlef)
Wingborg, Niklas (Swedish Defence Research Agency, FOI)
Tuinstra, M (NLR), Taguchi, H (Japan Aerospace Exploration Agency)
-
Benarous, A, Guendez, M. (Hassiba Benbouali University of Chlef)
-
202 Noise predictions of a hypersonic air transport vehicle concept during the landing and takeoff cycle
Senate room
35
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Commission room 3
Commission room 2
Closing event
17:00 - 18:00 To be placed
van Hasselt room
Structural Design 211 Aircraft Preliminary Design: the Windowless Concept Bagassi, Sara (University of Bologna) Lucchi, F., Persiani, F. (University of Bologna)
Handling Qualities 209 Investigation of Low Fidelity codes on the determination of Stability Derivatives and Characteristics of unconventional BoxWing Aircraft Clark Reis, JosĂŠ Roberto (Embraer) Bustamante Coura, J.C. (Embraer S.A.)
Aerodynamics
Multidisciplinary Design
73
105
Prognostics and Health Management 168
36
Multidisciplinary Design
Flow Control
194
249
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Computational Investigation on the Influence of Rotation on the Aerodynamics of an Isolated Wheel
Kothalawala, Tharaka (Brunel University)
Senate room
van Hasselt Commission Commission room room 3 room 2 Expanding customer services perimeter: from An advanced aircraft strategy to Multi-criterial design framework Active Flow Control technology and the aerodynamic for aircraft Applied at the other way around. synthesis method preliminary design Engine-Wing The case of Health of mission-oriented and optimization Junction and Usage aircraft design Monitoring Systems (HUMS) in the management of missiles stockpiles Kachel, Stanislav (Warsaw Military University of Technology)
Nicolay, Alexis (MBDA)
Kozkiewicz, A.K., Olejnik, A.O. (Warsaw Military University of Technology)
Chiquier, J.-M. (MBDA)
37
De Marco, Agostino (University of Naples Federico II"")
Fricke, Sebastian (previously German Aerospace Center DLR)
Vlad Ciobaca, Anna Nicolosi, F, Attanasio, L Krรถhnert, Jochen Wild (University of Naples (DLR), Olivier Blesbois Federico II") (Airbus Operations)
Commission room 4