Chapter U - WalzCraftCabinet Refacing Options

Chapter

Cabinet Refacing / Cabinet ReCrafting Options - Table of Contents

Section Name

Page #

U.1 • Cabinet Refacing • Cabinet Refacing Training • Refacing Methods U.2 • WalzCraft Custom Refacing Hand Tools • Door Installation Tool • Drawer Front Installation Tool • Seam Cutting Guide • Drawer Box Installation Supports • Veneer Smoothing Tool • Tri Trimmer • Additional Refacing Tool Recommendations

®

®

.com

C

U.1.2 U.1.2 U.1.3 U.2.1 U.2.1 U.2.1 U.2.2 U.2.2 U.2.3 U.2.3 U.2.4

99.7% American Made

-U

Cabinet Refacing / Cabinet ReCrafting Options

Cabinet Refacing / Cabinet ReCrafting Options

U.1.1

V17.2

U

Cabinet Refacing Training

Cabinet Refacing / ReCrafting Options

WalzCraft's Cabinet Refacing Training Program Comprehensive Training = Quality Installation • Cabinet Refacing is one of the remodeling industry’s fastest growing segments, offering homeowners a high quality alternative to traditional cabinet replacement at a price that’s easy on the homeowner’s budget. It’s an opportunity to leverage your core business strengths and capabilities, while enhancing your customer’s home.

• To address this opportunity, we have drawn on our 30 years of refacing experience to create the industry’s most comprehensive cabinet refacing installation training program.

• The WalzCraft Cabinet Refacing Training Program is a 3 day intensive workshop focusing on the quality installation of cabinet refacing materials.

“Curriculums adapted to practical experience leave you destined for success!”

• Learn how your material selection will directly affect the Refacing Method you elect to use, your measurements, cabinet preparation and installation; achieved in a combination of short classroom sessions and in-depth hands-on workshops.

• Upon completion of this workshop, you’ll have the know-how and skill-sets to provide your customers with a beautiful, long lasting, high quality cabinet refacing project.

U

• Please visit our Refacing Website to submit an inquiry today and begin your quest to become a member of WalzCraft’s elite Cabinet Refacing Training Program Alumni and an expert in one of the fastest growing, high end market trends in today’s woodworking industry.

www.RefacingTraining.com

U.1.2

V17.2

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667

Cabinet Refacing Training

Cabinet Refacing / ReCrafting Options

What is a Refacing Method?

A Refacing Method is an approach to cabinet refacing based upon pre-selected material combinations. An example would be using wood veneer to cover the faces (fronts) of the cabinets in concert with 3-ply hardwoods to cover the sides. WalzCraft has chosen 4 separate material combinations resulting in 4 unique refacing methods. The use of assorted corner moldings is optional with each method.

RM101 • Veneer Face (Front) • Plywood Side

RM103 • Veneer Face (Front) • Veneer Side

RM102 • Plywood Face (Front) • Plywood Side

RM104 • Solid Wood Face (Front) • Plywood Side

U

®

®

.com

C

99.7% American Made

U.1.3

V17.2

WalzCraft Custom Refacing Hand Tools

Cabinet Refacing / ReCrafting Options

Door Installation Tool WalzCraft’s Door Installation Tool helps with the mounting of hinged cabinet doors to the cabinet face frame. The device creates a ledge upon which the installer can rest the door while fastening it to the face frame.

• The device fits into the lower corner of the face frame on the side the door is hinged on. A cross bar and thumb screw hold the device in position.

• With the door resting on the ledge created by the device, the distance from the bottom of the door to the bottom of the face frame remains consistent. The door is easily attached to the face frame with no further measuring.

• Please see our Website at WalzCraft.com for more information on the use of this tool.

Door Installation Tool

#187272

Drawer Front Installation Tool WalzCraft’s Drawer Front Installation Tool firmly holds an installed drawer box in a slightly open position. The advantage is that during installation, the drawer front will not be contacting the face frame, only the front of the drawer box. This is a great aid when using double sided tape to temporarily position the drawer front.

• The device fits over a ¾" thick face frame and is held in position with a screw tensioner.

• With the device in position, the drawer box is pushed closed, but comes in contact with the device and is therefore held open.

The distance that the box is held open can be controlled with an adjustment screw. The drawer front can now be temporarily attached with double stick tape squares.

• Please see our Website at WalzCraft.com for more information on the use of this tool.

Drawer Front Installation Tool

#171374

U

► For PRICING ► See Section U.2 in our current Wholesale Pricing Catalog.

U.2.1

V17.2

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667

WalzCraft Custom Refacing Hand Tools

Cabinet Refacing / ReCrafting Options

Seam Cutting Guide WalzCraft’s Seam Cutting Guide is an installation tool that allows a refacing installer to quickly and easily cut perfect seams at stile & rail joints when installing thin veneers and 3D Laminate material on the face of cabinets. It is a precision crafted aid that will give years of service to the refacing professional.

• WalzCraft’s Seam Cutting Guide can be adjusted to fit onto the rail of a cabinet face frame. The vertical adjustment slot allows the guide to fit rail widths up to 4".

• Adjusting screws allow the guide to be set to precisely align the edge of the guide with the edge of the stile veneer.

• Once the edge of the guide is aligned with the edge of the stile veneer, a sharp utility knife uses the edge of the device as a guide to trim the rail veneer to length for a perfect fit.

• Please see our Website at WalzCraft.com for more information on the use of this tool.

Seam Cutting Guide

#187273

Drawer Box Installation Supports WalzCraft’s Drawer Box Installation Supports allow an installer to easily find the correct location for mounting of the drawer slide rear brackets during the installation of a drawer box.

• The hook bolt clamps the alignment bar to the front of the drawer box.

• The alignment bar is then clamped to the cabinet face frame. This positions the front of the drawer box in the same plane as the face frame.

• Once in position, the rear brackets are accessed at the back of the cabinet and screwed to the cabinet back.

• Please see our Website at WalzCraft.com for more information on the use of this tool.

#171377

Drawer Box Installation Supports

U

®

► For PRICING ► See Section U.2 in our current Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

U.2.2

V17.2

WalzCraft Custom Refacing Hand Tools

Cabinet Refacing / ReCrafting Options

Veneer Smoothing Tool WalzCraft’s Veneer Smoothing Tool helps to achieve the proper amount of pressure when installing wood veneer or 3D Laminate material with Pressure Sensitive Adhesive (PSA) or Contact Cement.

• The blade on the Veneer Smoothing device is made of a material that minimizes scratching or marring of finished surfaces.

• Please see our Website at WalzCraft.com for more information on the use of this tool. #171376

Veneer Smoothing Tool

Tri Trimmer Tool The Tri Trimmer helps cabinet refacers access and trim difficult spaces with ease. Whether you are using the paired blades for long stretches of exposed material, or using the single blade for hard-to-reach surfaces, the Tri Trimmer helps alleviate frustration while providing perfect, flush edges.

• It is great for refacing cabinets, trimming veneers and edgebanding, and trimming inner and outer face frames.

• This tool uses Carbon Steel 30 degree blades for clean cutting.

• The Tri Trimmer is ergonomically designed for a comfortable grip.

• Often used in conjunction with the Ceramic Edge Trimmer (See Next Page).

• Please see our Website at WalzCraft.com for more information on the use of this tool. #187079

Tri Trimmer

U

► For PRICING ► See Section U.2 in our current Wholesale Pricing Catalog.

U.2.3

V17.2

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667

WalzCraft Custom Refacing Hand Tools

Cabinet Refacing / ReCrafting Options

Additional Refacing Tool Recommendations Miter Trimmer

#160287

#160866

Ceramic Edge Trimmer

** Special Order item. Requires longer Wait-Time. **

#176636

Laminate File

#171501

Flush Cut Trimmer

#170323

Tri-Blade Breakaway Utility Knife

#156872

Veneer Smoothing Tool

#170325 - Replacement Blades

U

®

► For PRICING ► See Section U.2 in our current Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

U.2.4

V17.2

Your Notes Page

Cabinet Refacing / ReCrafting Options ®

1-800-237-1326

www.WalzCraft.com

U

U.2.5

V17.2

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667