carvinworld_april_2010-prosound_hi-res by 郭鼐

c 2010 PRO AUDIO

www.carvinworld.com

XP800L

Stereo 500w 6 Channel Mixer - lightweight only 4.5 kgs

XP1000L

3 Power Amps -1200w 8 Channel Mixer - lightweight only 7 kgs Ideal for:

Ideal for:

Working Bands House PA Theater Groups Larger DJ systems Public Address Churches

Small bands Acoustic & Vocals DJ’s Public Address Churches Installed Music with Announcements

USB power -charge your iPod™ while it plays

XP800L Mixer

GO WIRELESS NOW!

• DSP effect processors with over 256 effects and a control sending the effects back to the monitors • +48V Phantom condenser mic power supply switch • Main R/L, Monitor, and External Effects Send jacks • Class D power amps deliver high dynamic power from the Switchmode power supply that operates at 100,000 Hz for maximum efficiency delivering great sub bass performance while eliminates the weight • No wasted energy from the AC wall plug, plus it runs cool because it operates at 94% efficiency

XP1000L Mixer 8 Ch 1200w Stereo, Ultra light 15 lb powered mixer

6 Ch 500w Stereo, Ultra light 4.5kgs powered mixer • Superb sound from 6 XLR low noise mic pre amps, plus 2 stereo RCA input channel - 8 total inputs • 2 power amps – R/L stereo or switchable to Mono Main and Monitor delivering 500w RMS, 750w peak for medium size venues. Each amp delivers 250wRMS at 4 Ω, 140wRMS at 8 Ω. • 5V USB power port for I-Pods, MP3 players or USB LED lights • Input GAIN switches adjust the input levels for mic and line levels. • Active LOW, MID and HI channel EQ • Two 9 band EQ’s (stereo) - R/L or Main & Monitor

shown with optional wireless systems

OR ADD LATER

Dual Diversity UHF 16 Ch USM16-MC & USM16-BP mic or belt-pack (1 or 2) USM16-MC USM16-BP ANTENNA KIT (plate & connectors)

SEE PG 62 FOR WIRELESS ACCESSORIES

• Auto-switching AC input works for 120V 60 Hz or 240V 50 Hz • Size: 34cmWx 23cmD x19cmH, 4.5 kgs. • top slot for two optional USM16-MC or USM16-BP mic or belt-pack wire less systems – eliminates the clutter • Made in the USA • www.carvinworld.com/XP800L

• Superb sound from 8 XLR low noise mic pre amps, plus one stereo channel wth ¼”-inch R/L & RCA inputs -12 total • 3 power amps – R/L & Monitor delivering 1200w RMS, 1600 watts peak power for large venues. Each amp delivers 400w RMS at 4 Ω, 300w RMS at 8 Ω. • Speakon™ combo ¼-inch connectors. • 5V USB power port for I-Pods, MP3 players or USB LED lights • Variable GAIN controls adjust the in put levels to eliminate noise and input over-driving • Active LOW, MID and HI channel EQ

• Three 9 band EQ’s - stereo for R/L, plus Monitor • 2 DSP effect processors allow 2 effects at one time with over 256 effects each with controls sending the effects back to the floor monitors • +48V Phantom condenser mic power • Music Break switch allows background music while the channels are muted. • Main R/L, Monitor, and External Effects Send jacks • Class D power amps deliver high dynamic power from the Switchmode power supply that operates at 100,000

Hz for maximum efficiency delivering great sub bass performance while eliminates the weight • No wasted energy from the AC wall plug, plus it runs cool because it operates at 94% efficiency • The convenient auto-switching AC input for 120V 60 Hz or 240V 50 Hz • Size:43cmW x 24cmD x 25cmH 7kgs. • Top slot for two optional USM16-MC or USM16-BP mic or belt-pack wire less systems – eliminates the clutter • Made in the USA.

GO WIRELESS NOW! OR ADD LATER

Optional Dual Diversity UHF 16 Channel USM16-MC and USM16-BP mic or belt-pack wireless systems (1 or 2) USM16-MC USM16-BP ANTENNA KIT (mounting plate & connectors) SEE PG 62 FOR WIRELESS ACCESSORIES

R/L, Monitor Speakon Connectors

www.carvinworld.com

S16 STUDIO SERIES USB MIXER

RX1200L 4 Power Amps -1600w 12 CH Rackmount Mixer RW5 ROAD WARRIOR™ CASE

Built-in Power Amps for Studio Monitors

GO WIRELESS NOW! OR ADD LATER

To rackmount remove end-caps

RX1200L

12 Ch 1600w Stereo Rack Mount, Ultra-light 18 lb powered mixer • Superb sound from 12 XLR low noise mic pre amps, plus one stereo channel wth ¼”-inch R/L & RCA inputs • 4 power amps – R/L & Monitors 1&2 delivering 1600w RMS, 2400w peak power for large venues. Each amp delivers 400w RMS at 4 Ω, 300w RMS at 8 Ω. • Rack mountable - remove end-caps to install into a 5U or larger rack case • Speakon™ combo ¼-inch connectors. • 5V USB power port for I-Pods, MP3 players or USB LED lights • Professional Insert jacks at the push of a button on the first six channels • Variable GAIN controls adjust the input

Dual Diversity UHF 16 Ch USM16-MC & USM16-BP mic or belt-pack (1 or 2) USM16-MC USM16-BP ANTENNA KIT (plate & connectors) SEE PG 62 FOR WIRELESS ACCESSORIES

levels to eliminate noise & over driving • Active LOW, MID and HI channel EQ • Four 9 band Graphic EQ’s - R/L, plus Monitor 1 and 2 • 2 DSP effect processors allow 2 effects at one time with over 256 effects each with controls sending the effects back to the floor monitors • +48V Phantom condenser mic power • Music Break switch allows back-round music while the channels are muted. • Class D power amps deliver high dynamic power from the Switchmode power supply that operates at 100,000 Hz for maximum efficiency deliver-

ing great sub bass performance while eliminates the weight • No wasted energy from the AC wall plug, plus it runs cool because it operates at 94% efficiency • The convenient auto-switching AC input for either 120V 60 Hz or 240V 50 Hz • Size: 48cmWx 26cmDx24cmH, 18 kg s. • Top slot for two optional USM16-MC or USM16-BP mic or belt-pack wireless systems – eliminates the clutter • Made in the USA. For more information go to carvinworld.com/RX1200L

S16

R162 Rackmount Kit STUDIO MATE S16 SPECS Freq. response: 20 - 20 kHz ±1 dB THD distortion: less than .002% Equivalent input noise: -128dBm S/N Ratio 100 dB Dynamic Range: 114 dB Mic Gain: 45 dB Line Gain: 30 dB Total Gain: 65 dB (balanced) Max Output: +20 dBm EQ Section HI ±15 dB @ 12k Hz MID ±10 dB @ 2.2k Hz LOW ±15 dB @ 85 Hz Stereo Power Amp: 44w RMS Size/Wt: 40cmW x 30cmD x 8cmH Wt: 3.6 kgs

The S16 new ultra-low noise studio preamps provide noiseless and distortionfree xrecordings. The exclusive 44w stereo power amp section will give ample power to your passive studio monitors • 8 phantom powered XLR Mic pre-amps • 4 stereo (8 mono) channels with gain switches • channel inserts • 3 band channel EQ • dual effects sends • stereo pan • headphone jack • LED VU meters • two balanced XLR outputs and two 1/4” outputs • effects send and return jacks • RCA tape in and out, stereo USB in and out for computer recording. Built-in power amp 22w per ch @ 8 Ωs.

Exclusive 44w Stereo Power Amp

Stereo USB S/PDIF outputs

PM5 125W REFERENCE SPOT MONITOR PM5-B Available March 1

PM5-B

PM5-W

Black–stand mount & 1/4” White (no stand mount jacks & jacks) The PM5-B is simply the best spot/reference monitor made! • As a true 2-Way system, you get the full audio spectrum from 86 to 19.5kHz • This multi-purpose monitor yeilds excellent high frequency and exceptional bass from a heavy-duty 5 1/ ” woofer • 125W capacity • High output level is “big” sounding, not what you’d expect from a small enclosure. • High impact molded enclosure incorporates mounting slots for hanging • The Black PM5-B features a 20-degree angle insert bracket to accept a mic stand for spot monitoring & dual 1/4” speaker jacks (so you can daisy-chain PM5-B’s together) along with wire terminals. The PM5-W (white) features wire terminals. 4

Water Resistant

RX1200R

Rackmount-no power amps

www.carvinworld.com

PM5 TECHNICAL SPECIFICATIONS

Frequency Response: 75 Hz to 19.5 kHz Power Handling: 125w RMS Recommended Amp: 50 to 150 watts Nominal Impedance: 8Ω Inputs/Outputs: Two 1/4”(PM5B) , two spring terminals Woofer Enclosure Type: Vented Box Construction: Molded Enclosure Dim/Wt: 27cmH x 17cmD” x 17cmW • 1.8kgs

For outdoor use

Drop Ceiling

OMNI™ Tweeter swivel adjustment for directional accuracy

Terminals accept wire and banana connectors. PM5-B features 1/4” speaker jacks

www.carvinworld.com

PM5-UB black “U” Bracket PM5-UW white “U” Bracket

PM5-CB Bracket Wallmount/ Ceiling with saftey cable

POWER AMPS - ULTRA-LIGHT 1000w-3800w

ALL MODELS 6.8kgs and under

1/4 to 1/3 the weight of conventional amps

“Carvin DCM power amps are very smooth sounding, very powerful and they don’t quit!” - Don Weiss, Dondi Sound Clients include Miramar Air Show, studio engineer for The Beach Boys, Rush, Robert Palmer...

DCM1000L, DCM2000L, DCM1540L, DCM3000L, DCM3800L

“Power, Reliabilty and Volume that’s what this rack of DCM’s is about.” Rich Bartle – B.I.G. Productions Clients include: Ricky Martin, Christina Aguilera, Sony Pictures, Woodstock ‘99, ESPN, Polygram Records, Capitol Records, Virgin Records, Warner Bros Records and more...

The new DCM1000L and DCM2000L feature Class D output raising power amp efficiency even higher! The DCM1540L, DCM3000L and DCM3800L feature linear Class A/B output stages.

“I like clear defined tone at high volume and you need a lot of headroom to do that...A DCM1000 powers my rig.” Frank Gambale

“DCM’s power our 500 seat main stage and club on Hollywood Blvd. It’s the most versatile system I’ve used.” Fedge - Head Engineer MUSICIAN’S INSTITUTE “I have eight of these and use them to power Carvin subs. I have run them at full power all day on many different occasions and they handle it with absolutely no problem.” Thomas Carroll, Atlanta “Our band uses both Carvin and Berhinger gear. Our DCM1000 is as loud as the Euro2500. Our DCM1500 blows it out of the water.” Jayce Bass, Kansas “I purchased 2 DCM2500s... the sound they produce is outstanding beating out the top brands of Crest Audio and Crown Audio. Along with the two DCM2500‘s I also run a DCM2000 on mids and a DCM1000 for horns and tweeters. At a battle of the DJs I was heard two miles away with total clarity. Thanks Carvin for making great products.” Waymon Mercer, Fl 48

ULTRA-LIGHT SERIES

If you want an amp that delivers exceptional sound/reliability, ultra-light weight 6.8kg from 1000w to 3800w and it’s made in the USA, the DCM is the answer. You should seriously consider the ultra-light feature, which comes in part from its heavy-duty aluminum frame. Aluminum is more expensive, but worth every penny to keep your rack as light as possible. Expect 2/3 to 3/4 savings over conventional amplifiers – 22.6kgs to 27kgs amps become 6.8kgs. High power, uncompromised sound and maximum reliability is at its best for both touring systems and fixed installations. The concert stage is the ultimate test of professional audio and for the last decade the DCM has made its mark serving top artists and concert venues night after night, year after year. The DCM is a proven American made workhorse backed by over 60 years of manufacturing excellence.

- Highest value ultra-light amps in the industry - Heavy-duty aluminum frames - Most models designed for continuous 2 Ωs loads - Power supply designed for superior bass - “Green” design to save engery - Quiet hum-free operation with noise less than -106dB for studio applications - Class D: Low THD: < 0.08% at 8 Ω - Class A/B: Ultra-low THD: < 0.03% at 8 Ω - Handles difficult mismatched or reactive loads - Soft-start power-up prevents tripping AC breakers - Speaker Guard™ protects from harmful DC - Multi speed fans - rear to front flow for cooler racks - Distortion-free limiters to help protect drivers - Independent thermal overload protection - Recessed front to prevent control damage - Percentage of power, clip, bridge, protect and power LED indicators - Balanced XLR and ¼-inch TRS inputs - Speakon™, Binding Post, ¼-inch TS outputs - Convenient Ground Lift & Parallel Input switches - Shock-proof SMT construction - Auto switches to either 120 or 240 VAC 50 to 60 Hz - Fit all racks - only 266mm deep - 3-year warranty - Made in the USA SERIOUS POWER - The DCM’s headroom reveals its high dynamic power from the Switchmode power supply that operates at 130,000 Hz. Extreme currents are delivered to the most demanding subwoofer system, which are driven under 4 Ω bridge - 2 Ω operation. Every DCM easily handles the most difficult mismatched or reactive loads and is AC generator friendly. COOL EFFICIENT DESIGN - A high efficiency heat transfer system offers the most advanced cooling, which is one of the keys to reliable power. Five high ratio 6063-T5 flowthrough aluminum heat sinks remove heat fast with multi-speed fans that runs quiet under 2 Ωs loads. Air is pulled from the rear and exhausted to the front to keep the rear of your rack cool. R & D designed a “direct mount” system for the power output devices to be directly mounted to the heat sink, which eliminates any thermal barrier to keep your amp running cool. ACCESSORY GROUP - The accessory group features recessed front controls with status indicators that won’t get bumped or easily moved.

www.carvinworld.com

ENGINEERED TO A HIGHER STANDARD The DCM Series features a heavy-duty galvanized steel chassis. All printed circuit cards are double-sided FR4 military-grade fire retardant with plated through holes - soldered under, on top and through each component. SMT construction offers “shock-proof” protection. Every DCM is engineered to a higher standard for unsurpassed sound quality and durability making it one of our most successful products.

120/240V operation

8Ωs/CH 4Ωs/CH 2Ωs/CH 8Ωs bridged 4Ωs bridged

DCM1000L 200w 325w 500w 700w 1000w

DCM2000L 350w 550w 1000w 1100w 2000w

DCM1540L 425w 750w – 1500w –

DCM3000L 550w 950w 1500w* 1900w 3000w*

DCM3800L 700w 1150w 1800w* 2300w 3800w*

CLASS D 2U 4.5kgs

CLASS A/B 2U 6.3kgs

CLASS A/B 2U 6.8kgs

OUTPUT MODE Rack Space Net Weight

5 DCM3800L 19,000 watts - 75lbs! All ratings EIA 1% THD at 1 kHz except * tested at 1 k Hz no clipping 33ms on 66ms off THRU

INPUT

BRIDGE

cross-flow heat sinks

Shock-proof SMT construction

SPEAKONS™ ACCEPT 1/4 INCH JACKS

BRIDGE ONLY

The NEW DCM200L has evolved from the ever popular DCM150 encorporating a new switching power supply delivering more power for the studio with less heat and no fan. With a push of the rear impedance button, you get 100w at 8 Ω or 4 Ω. DCM200

The DCM2004L is offered for applications that require 4 high-powered amps in one package. Great for installations.

STEREO AMPLIFIER

SERIAL NUMBER

CUSTOMER COMMENT

Got my 1540L today and have used it with a BMaxT into my Carvin LS1503 3way. First impressions are, WOW, this sucker gets loud. I tried bridging the amp at first, but it was way 1 2 too much for the 1503. I had the 1540 at 9 o’clock. I then switched to single channel, which 2 1 was giving me 475 watts at 8 Ωs. Was able to turn up the BMaxT a bit more, gain at about 12 o’clock and master at about 10 o’clock, 1540 still around 9 -10 o’clock. I was only able to light up the amp on “ green “ which, according to the manual, is not driving the amp hard enough! I DCM1540L, DCM2000L, DCM3000L, DCM3800L turned up the preamp as much as I could , much louder than I ever will play, and still couldn’t get the 1540 to Christmas tree at all. Probably way too much power for my needs, unless I go to a stack, or larger cab. Might be the ticket for you Acme users out there. LIFT

INPUT OUTPUT

120-240VAC 50/60Hz 1000VA

High current components - FR4 fire retardant circuit card

THRU

BRIDGE LIMITER GND PARALLEL

8 OHM 325W/CH - 1200W BRIDGE 4 OHM 600W/CH - 2000W BRIDGE 2 OHM (MIN) 1000W/CH

BRIDGE

STEREO AMPLIFIER

120-240VAC~50/60Hz 225VA

A rear “Ground Lift” switch eliminates ground loops. A “Parallel Input” switch eliminates the “Y” adapter typically used for paralleling channels. The mono “Bridge” switch delivers the full power of the amp (both channels) into one output. The limiters are available at the push of a button to help control peaks protecting your drivers. Connecting is done with balanced XLR and ¼- inch TRS inputs. Three types of outputs feature Speakon™, binding post, and ¼-inch phone connectors for every possible hookup. The soft-start circuit gently turns the DCM on to prevent AC breakers from tripping.

4Ω MIN.

8Ω MIN.

4Ω MIN.

INPUT 1

8Ω/CH 4Ω/CH 16Ω BR 8Ω BR

100W X 200W X

75W 100W 150W 200W

MIN. LOAD SELECT

ST. 8Ω 4Ω

8Ω/CH 4Ω/CH 16Ω BR 8Ω BR

100W X 200W X

BR. 16Ω 8Ω

8Ωs/CH 4Ωs/CH 2Ωs/CH 8Ωs bridged 4Ωs bridged OUTPUT CLASS Rack Space

INPUT 2 GND LIFT

DCM Special purpose amps

PARALLEL

Net Weight

BRIDGE

DCM200L Rear Panel

DCM200L 100w 100w – 200w –

DCM2004L 350w x 4 500w x 4 – – –

CLASS A/B 1U 1.8 kgs

CLASS D 2U 4.5kgs

75W 100W 150W 200W

DCM2004L Rear Panel

DCM200L

DCM2004L

DCM SPECIFICATIONS CLASS D, Freq. Resp.: +0 /- 3 dB 20 Hz - 20 kHz, THD: < 0.1% @ 50% output, < 0.2% 20-20 kHz @ 90% output CLASS A/B, Frequency Response: +/- 0.5 dB 20 Hz - 20 kHz, +/- 1.5 dB 10Hz - 40 kHz, THD: 0.03% @ 50% output, .1% 20-20 kHz @ 90% output Sensitivity: (4 Ωs, vms) 1.0 V, Signal to Noise Ratio: Greater than 106 dB, Input Impedance: >20K Ω balanced, Power Supply: Switchmode, Speaker Guard™ protection circuit immediately disconnects your speakers, Over-Current: protected, Under-Voltage: protected, Thermal: protected, AC Input: 90-250VAC 50-60Hz

www.carvinworld.com

DIGITAL EQ AND LOUDSPEAKER MANAGEMENT

XD88

Eight 30-band Graphic Equalizers are standard on the XD88. Now every input can have a 30 band equalizer assigned for total sonic control. Each band has a full 12dB of cut/boost enabling the user to handle even most difficult feedback situations The XD88 offers unlimited possibilities with its class leading I/O design. Eight fully balanced XLR inputs and outputs coupled with insert jacks on each channel makes the Carvin XD88 a NO LIMITS loudspeaker management system. SPECIFICATIONS:

INPUTS: Connector Female XLR & ¼” TRS 10kOhm electronically balanced Maximum Input +18 dBu Digital Controls: Gain 0dB to -32dB in 0.2dB steps EQ 30 Band Graphic 25Hz to 20kHz, +/- 12dB in 0.1dB steps

XD88 Serial Control LOAD

GENERAL: Dimensions 48cmW x 9cmH x 20cmD Weight 3.31 kgs Power 90-250 VAC, 50/60Hz standard IEC receptacle SYSTEM PROCESSING: Multi DSP 48kHz 24 bit A2D Converters 114dB 24 bit D2A Converters 120dB 24 bit 50

www.carvinworld.com

100 125 160 200 250 315 400 500 630 800

COPY

PASTE

FLAT

1 K 1 . 2 5 K1 . 6 K 2 K 2 . 5 K 3 . 1 5 K 4 K

5K 6.3K 8K

10K 12.5K 16K 20K

+12

-8

0dB

-24

-6

-32

-12

-6 -12 0.0

0.0

OUTPUTS

Control every aspect of the XD88 using the Xdrive software interface. The easy to use layout has all the controls and program settings on one screen so there is no need to toggle between windows. Every XD88 comes standard with the Xdrive software package.

0.0

2 A

H H

4 A

5 A

6 A

7 A

8 A

OUTPUT

-24

www.carvinworld.com

0.0

OUTPUT MUTES

PASTE

2.24

1.52

0dB

800

1.52

0dB

800

1.52

0dB

800

1.52

20 0.0

-12

0.04 800

125

0.04

20 0.0

-6

0.76

-12

0.04 800

125

0.04

-6

0.76

20 0.0

125

-12

0.04 800

0.0

0.04

500 2

1K 4

20K

OFF

125 20

0.04 800

0.0

0.04

20.0

BUT BES L-R

0.0

10K 20K

0.000 msec

DELAY

800

0.76

20 0.0

0.0

HI CUT

LO CUT

GAIN FREQ BW +12 3.00 20K

2.24

-6

PEQ4

GAIN FREQ BW +12 3.00 20K

0.76

0.0

50 100 200

800 125

0.0

+18.0 dB 0. 02 sec

FLAT

PEQ3

PEQ2 GAIN FREQ BW +12 3.00 20K

0.0

OUTPUT

1 2 3 4 5 6 7 8 COPY

0.0

20 16 12 8 4 0 -4 -8 - 12 - 16 - 20 20

-12

0.0

0dB -6

-32

0.0

PEQ1 GAIN FREQ BW +12 3.00 20K

-8

-16

0.0

1 2 3 4 5 6 7 8

GAIN

0dB

0.0

INPUTS

1 A 3 A

The XD88 features a powerful routing tool that allows the user to send any input to any output. The Xdrive router module has a software interface making it easier to route audio to wherever it is needed.

-16

ROUTER

Limit the XD88 output and protect your speakers. Each of the eight outputs have an adjustable limiter module built in with a maximum threshold level of +18dB at full output and down to -14dB at full limit.

U P LOA D F I R M WA R E

CO N N E C T TO D E V I C E

0.0

OUTPUTS: Connector Male XLR 150 Ohms electronically balanced Maximum Output +18 dBu Dynamic Range 120dB un weighted 22Hz – 22kHz Parametric EQ is critical Frequency Response 20Hz – 20kHz to achieve the best sonic Distortion (THD) <0.005%, 20Hz – 20kHz @+10dBu output. The XD88 gives 4 Digital Controls Gain 0dB to -32dB in 0.2dB steps bands of EQ per channel. Phase 0 or -180 degrees Parametric EQ 20Hz to 20.5kHz, +/- 12dB in 0.1dB steps, 0.04 to 3.0 octaves(Q) in 0.04 steps. Limiter +18dB to -14dB(at Output) hard limiting Release time 0.02 to 5.0 seconds Crossover Filters 6, 12, 18, 24, 48dB/oct, Butterworth, Bessel and Linkwitz-Riley Delay 0-456.939mS in 21uS steps (0-507ft 8.52in. in 0.28in steps or 0-152.313 meters in 7mm steps)

SAVE

INPUT GAIN 25 31.5 40 +12 0dB

20K

OFF

BUT

800 18

BES

125 24

L-R

20 48

20.5K

System also includes:

Real Time Analyzer

Delay Module

6 12 18 24 48

XC3000 2/3 WAY STEREO CROSSOVER • Precision 2-way or 3-way stereo electronic crossover • Stereo bi-amped or tri-amp set ups • Sub woofer output sums channels 1 & 2

State-of-the-art Linkwitz Riley 24 dB/octave filters • High slew rate for a transparent, uncolored sound • Phase correcting switches • Balanced XLR & TRS 1/4” inputs and outputs

EQ2015 DUAL 2/3 OCTAVE EQUALIZER

• EQ2015: 2/3 Octave Center Freq: 25,40,63, 100, 160, 250, 400, 630, 1k,1.6k, 2.5k, 4k, 6.3k, 10k, and 16 kHz ± 5%

• Super quiet 104dB dynamic range with high headroom • Balanced XLR and TRS 1/4” connectaors • Level controls plus sweepable high & low cut filters • In/Out bypass to compare the original source • Large precision sliders • Built-in Power Supply – no “wall-wart”

EQ2030 DUAL 1/3 OCTAVE EQUALIZER

• EQ2030: 1/3 Octave Center Freq: 25,31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k,1.25k, 1.6k, 2k, 2.5k,3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16 k and 20k

www.carvinworld.com

CONCERT SERIES MIXERS

NEW!

Larger Consoles with 8 CH Sends,

4 Band Dual Sweep EQ, and bus Compressors

4 BAND DUAL MID SWEEP EQ

8 SENDS - 6 MONITORS 2 EFFECTS

4 SUB

C3248

C2448

8 CH Sends, 4-band EQ Never before has there been so much performance packed into a rugged, compact American made 4 bus console. All models feature R/L USB recording outputs along with ultra low-noise, high slew rate IC’s for exceptional sound. Sealed controls and switches guard against the elements while the “SMT” Surface Mount Technology construction ensures the integrity of each component. The convenient auto-switching AC input is for either 120V 60 Hz or 240V 50 Hz. For information see carvin.com/C1644U or /C3248 Exclusive big board features are now standard in the new 4 bus 24 ch C2448 and 32 ch C3248 consoles with 8 SENDS per channel and XLR outputs – 6 Monitor and 2 Effects, and 4 BAND EQ with LO and HI shelving, LO MID and HI MID sweeps, plus 4 COMPRESSORS for SUB 1-4 with LINK switches. Unparalleled design for live sound. The C844U, C1644U and the C1644P powered mixer offers 6 SENDS per channel – 4 Monitor and 2 Effects, plus a 3 BAND EQ with LO and HI shelving plus a MID sweep. The powered C1644P offers 4 internal power amps delivering 1200w in a Road Warrior™ case.

other models with 6 sends and 3 band EQ

Freq. response: 20-20k Hz ±1 dB THD distortion: .01% 20-20k Hz E I N: -117 dBm S/N Ratio 90 dB Dynamic Range: 104 dB Mic Gain: 52 dB Line Gain: 30 dB Total Gain: 72 dB (balanced) Max Output: +28 dBm Power Req. 90 to 250VAC 50-60Hz, 50VA C1644P 120VAC 60 Hz Dim: (WxDxH) C844U: 36cm x 36cm x 8cm wt: 5kgs C1644U: 57cm x 36cm x 8cm wt: 7kgs C1644P: 63cm x 40cm x 23cm wt. 17kgs C2448: 7 6cm x 41cm x 8cm wt: 10kgs C3248: 9 6cm x 41cm x 8cm wt: 13kgs

Rear C3248

8 CH Sends, 4-band EQ MASTER FEATURES CHANNEL FEATURES • 4 BUS GROUP ASSIGN L/R ASSIGN *8 SENDS-6 MONITOR 2 EFFECTS *4 Band EQ with LOW• MID and HI-MID sweeps • Balanced XLR Mic inputs • Balanced LINE inputs INSERTS/DIRECT OUTS • +48v PHANTOM power • CH Gain: 55 dB • R/L STEREO PAN • SIGNAL LED • PEAK LED • MUTE SWITCH • PFL SWITCH • 60mm audio FADER * C844U, C1644U, C1644P - feature 6 sends 4 monitor, 2 effects, and 3 Band EQ with Mid Sweep

CONCERT SERIES SPECS

C2448, 32448 Channel Strip

GROUP COMPRESSORS

• 4 SUB GROUP faders *4 SUB GROUP COMPRESSORS with LINK Switches • L/R Assign switches • L/R MAIN faders • MONO output control *6 MONITOR sends • 2 EFFECT sends • 2 Stereo RETURNS • Record out stereo RCA • 2 built-in 24-BIT EFFECTS reverbs, chorus, echos, flanging - 256 effects each • 2 master effects LEVELS • 4 EFFECT PARAMETERS • 2 EFFECT PEAK indicators • 2 EFFECT MUTE switches • EFFECTS to MONITORS * 2 USB Power ports • 2 - 9 BAND GRAPHIC’s • EQ ASSIGN switches • 10 segment VU meters • VU & PHONES switches Stereo HEADPHONE level • OUTPUTS: BAL XLR’s & 1/4”, USB L/R • OUTPUT:+28dBm • THD less than .01% * Not available on C844U, C1644U & C1644P

OPTIONS FOR C2448 & C3248

Dual Diversity UHF 16 Ch USM16-MC & USM16-BP mic or belt-pack (1 to 4) USM16-MC USM16-BP ANTENNA KIT (1 to 2) (plate & connectors)

SEE PG 62 FOR WIRELESS ACCESSORIES

Stereo L/R USB output except C1644P

Carvin is the official Pro Sound company for Musician’s Institute in Hollywood, CA.

POWERED C1644P

C844U

8 CH, 6 CH Sends, 3-band EQ

C1644U

16 CH, 6 CH Sends, 3-band EQ

16 channels/4 power amps

1200w 4 x 300w @ 4Ω, Freq Resp 20 20k Hz, THD .1%, Outputs: four 1/4” and Speakon™, Built-in ROAD WARRIOR™ case RW1644 Road Warrior™ Case for C1644 RW2448 Road Warrior™ Case for C2448 RW3248 Road Warrior™ Case for C3248

www.carvinworld.com

C1644P

6 CH Sends, 3-band EQ USB not available

www.carvinworld.com

LS HIGH PERFORMANCE LOUDSPEAKERS

The LS Series™ are one of the best loudspeaker values on the market today offering superb studio quality sound at high output levels. Your audience will appreciate crystal clear highs with deep, resonate bass making all the difference in your performance. • Rugged black DuraTuff™ carpet that will take a beating holding up on the road

LS2153

• Premium 13-ply Poplar Hardwood – “no MDF” producing lighter stronger cabinets. With Steel handles. • Powder coated steel grill that protect your drivers. • High-end loudspeakers designed for high power applications • Wide angle 90x60 degree horns for wider coverage. • Crossovers with Speaker Guard™ protection - Bi-ampable though NL4 Speakon™ connectors. • American made in San Diego, CA.

LS1202 MAIN

Cover CVS1202A

The LS1202 is the workhorse for the LS Series that delivers the full audio spectrum from a compact tuned enclosure with great efficiency. The heavy-duty 12-inch woofer provides a tight, solid bass with a high frequency driver to match. Designed for small to medium size venues, the audience will hear crystal clear audio. Power: 300w continuous, 600w program, 1200w peak. 8 Ωs Size/ Wt: 59cm x 39cm x 29cm , 16kgs

SS20 6’ 8” SPEAKER STAND

LS1202M

LS1503 The LS1503 is our premier 3-way system that delivers studio

quality sound to the audience. The 6-inch driver enhances the clarity and throw of the mid frequencies leaving the 15-inch LF driver and 1-inch titanium HF driver to work in their optimum frequency ranges. Power: 400w continuous, 800w program, 1600w peak. 8 Ωs. 73cm x 48cm x 38cm, 26kgs

LS1523

Cover CVS1202M

The LS1523 provides the ultimate in 3-way high power performance. Featuring dual vertically aligned 6-inch mid range drivers that provide a line array affect for cleaner mids that project further into the audience, and dual 15-inch heavy-duty LF drivers for maximum punch. The high power, extended range HF driver delivers great clarity. Power: 800w continuous, 1600w program, 3200w peak. 4 Ωs, 111cm x 58cm x 38cm , 41kgs

The LS1202M is a 30-degree vertical monitor format using the same LS1202 components. Exceptional intelligibility makes this monitor a best seller. Deep bass from its heavy-duty 12-inch woofer and crystal clear highs from its titanium 1-inch HF driver delivers high levels to the performer - even on the loudest stages. Feedback suppression is a special feature from the HF horn lens design. Power: 300w continuous, 600w program, 1200w peak. 8 Ωs. 65cm x 39cm x 37cm , 15kgs

LS1202

Cover CVS2153B

The LS2153 is a compact dual 15-inch high power 3-way main that takes up very little floor space on stage and is also ideal as drum monitor. The unique 3-way design uses one of the heavy-duty 15-inch LF drivers for mid and low frequencies and the other for low frequencies only, providing cleaner mids with all the low-end punch of a dual 15-inch design. The high power extended range HF titanium driver delivers great clarity. Power: 800w continuous, 1600w program, 3200w peak. 4 Ωs 111cm x 42cm x 38cm , 33kgs

LS1202M

LS1801NA Lightweight Switch Mode Power Supply Net wt: 28kgs

LS1501/LS1801

LS1801NA POWERED SUBWOOFER

The powered LS1801NA features 1400w peak, 700w continuous for extra power. 28kgs Cover CVS151

SS5

LS1502 MAIN The LS1502 is Carvin’s best selling

enclosure because of its extended bass and high frequency range for sound reinforcement. With its heavy-duty 15-inch woofer in a compact computer-tuned enclosure, the system delivers plenty of deep bass along with crystal clear highs from its 1-inch titanium horn. Power: 400w continuous, 800w program, 1600w peak. 8 Ωs 65cm x 47cm x 29cm, 19kgs

SS20 6’ 8” SPEAKER STAND

LS1523

• SS4-2 two adj. poles

SS5-2 two spk side-mounts

LS1502M

The LS1502M is the perfect monitor match for any LS sound reinforcement system. With a heavy-duty 15-inch woofer and 1-inch HF driver, which fits into a tight 30 degree vertical monitor format, the LS1502M takes up less stage space than conventional 15-inch monitors, but delivers more output because of its efficient design. Power: 400w continuous, 800w program, 1600w peak. 8 Ωs, 65cm x 47cm x 40cm, 20 kgs

LS1502

LS1801N SUB

SS4

The LS1801N is a compact, high output Neodymium subwoofer designed to add extra punch to any system. The compact design competes in size with most 15-inch subs, Yet it out performs other 18-inch subs due to a high Q 4-inch voice coil. Power: 800w continuous, 1600w program, 3200w peak. 8 Ωs. Includes a pole mount for the optional SS15 dual speaker pole or PL42 single speaker pole to be used with the LS1202, LS1502 or LS1503. For stacking, the LS1523 and LS2153 have a matching footprint of the LS1801. 60cm x 50cm x 58cm, 26 kgs

LS1501 SUB

A great sub at a great price. 400w continuous, 800w program, 1600w peak. 8 Ωs. 60cm x 50cm x 57cm, 29 kgs

LS1802N SUB

The LS1802 is a high output Neomymium subwoofer system. The high Q 4-inch voice coil, 18-inch drivers outperforms most dual 18-inch subs on the market. 1600w continuous, 3200w program, 6400w peak. 4 Ωs, 60cm x 101cm x 57cm , 45kgs

LS1502M 56

www.carvinworld.com

Features

Features ♦ Very Compact Vertical monitor design ♦ 30degree near field monitor tilt ♦ Passive full range or Bi-amp crossover ♦ Heavy-Duty 12-inch Woofer 3-inch VC ♦ Neodymium 1-inch exit 1.5-inch VC HF driver The TRxN Series™ steps♦ upBlack the performance, offering thefinish fin- has DuraTex™ weather resistant

TRxN PROFESSIONAL NEO LOUDSPEAKERS

to be the biggest driver technological advancement in 30 est Neodymium drivers and Baltic Birch enclosures for audio years, Neodymium magnet drivers sound so good and take reproduction exceedingApplication loudspeakers costing thousands. De- so much power without lugging 100’s of extra pounds. signed for permanent installations, large and powerful Huge voice The TRx12N is a fullvenues range sound reinforcement • monitor. The coils up to 4” handling thousands of watts. 12-inch woofer and 1-inch exit horn driver provides crystal enclosures designed for wide coverage portable systems. • Trapezoid clear vocal reproduction and plenty of low-end to handle most • Tough sprayed on, 2mm thick DuraTec™ finish that is • Narrow angle 60x40 horns for close placement – less monitoring needs. The 30 degree tilt is idea for near field moni moisture resistance &toring. UV protected. reflections in smaller clubs. Effective for both permanent and portable applications, it comes with handles, rubber footpads, and a 1-3/8-inch pole with Speaker Guard™ protection. 2-way • The finest Russian Baltic Birch 13-Ply hardwood with deep • Crossovers mount cup. recessed steel handles. enclosures Bi-amping through NL4 and 3-way enclosures Applications • Heavy-duty Fly hardware. Fly pointsinclude: rated for 10,000 lbs loads. Tri-amping through NL8 Speakon™ connectors. ♦ Small systemfor driver • Splash-guard foam backed 16House gaugeMonitor steel grills • American made in San Diego, CA. ♦ Small House of Worship Specifications TRx12N protection and aesthetics – drivers are not seen. ♦ Band PA Monitors 15-inch Main / Monitor • Considered the finest in the industry, the TRxN series uses System 2-Way Type: 12-inch 2-Way Frequency Response: 65 Hz – 20 kHz (-10DB) NEODYMIUM driversDescription for their ultimate performance. What

TRx115N

Coverage Pattern:

Crossover: The TRx12N’s unique 12-inch coaxial driver proFeatures vides on axis♦ alignment in a Coaxial small 12” package. Withdesign TRx12N Powerful and Compact Trapezoid Crossover Frequency: the Neo horn♦driver mounted to the back oftilt the 12Monitor Cut with 38degree Power: inch woofer, all the sound comes from the same Full Range ♦ Passive full range or Bi-amp crossover source—providing smooth reproduction both on Amplifier Power: ♦ Heavy-Duty Neodymium 15-inch WooferRecommended 3-inch VC and off axis. The compact, 30-degree tilt design Sensitivity (1w @ 1m): Frequency Driver ♦ TitaniumHigh 1-inch exit, 2-inch VC, HF driver Maximum SPL: fits in tight spaces for installations on the stage or ♦ Black DuraTex™ weather resistant finish LF Driver: as the main system using the pole mount. There is HF Driver: Low Frequency Driver no monitor that offers the performance to size ratio Nominal Impedance full range: Application that the TRx12N provides. The system provides 4 Bi-amp LF: fly points for overhead suspension. The enclosure Bi-amp HF: TheofTRx115N is a full range sound reinforcement monitor. TheEnclosure: is constructed CNC machined multi-ply Hard15-inch woofer provides of low-end to handle Suspension/Mounting: all monitorwood with heavy gauge steel powderplenty coated front ing needs. Couple4the with a TRx118N, for an exgrills. The crossover includes pin TRx115N NL4 Speakon Finish: tended low-end drum monitor and ¼” phone connectors mounted on FR4system. double Effective for both perma-Transport: andforportable applications,and it comes with handles, rubber sided circuit nent boards solid construction duGrill: footpads, and a 1-3/8-inch pole mount cup. rability. Carvin’s exclusive Speaker Guard™ HF

Celestion coaxial driver

TRx12N

Driver protection uses a self resetting relay circuit

The TRx12N’s is our tobest performance include: dim sounding, the HFApplications driver highest 10 dB protecting the voicefloor coil ♦ power. Club system Monitor are excessive The benefits the driver monitor. The 12-inch from coaxial Neo driver provides outstanding is not turned♦off losing all high frequencies, the of the Worship projection, delivering articulate highs House and tight lows. One of its best circuit resets♦as Band soon PA as monitors the high frequency conattributes is its small package. Compares tolevels. other monitors selling for tent is back to normal over $1000.

TRx115N Description

TRx215N

Connectors: Dimensions (H x W x D): Net Wt: Rigging Accessories:

70 Hz – 18 kHz (-3 dB) 80 round 2-Way with Speaker Guard™ HF protection 2.5 k Hz Continuous / Program / Peak 300w /600w /1200w 450 – 900w 96dB 121dB 12-inch woofer 1-inch Neodymium 1.5-inch VC 8 ohms 8 ohms 300w /600w /1200w 8 ohms 60w /120w /240w 18mm Multi-Ply Hardwood 1-3/8-inch pole mount cup 4 captive 3/8in –16 nut fly points Black DuraTex™ 1 Recessed Handle Black powder coated 16-Ga steel Acoustically Transparent Foam Backing Two NL-4 Neutrik Speakon’s 17 in x 15.5 in x 15.25 in 430 mm x 395 mm x 390 mm 33 lb (15 kg) TCSHK10 3/8-16 Eyebolt TCSHK15 3/8-16 Quicklink™

Dual Specifications 15-inch 3-Way TRx115N System Type: Frequency Response:

15-inch 2-Way, bass-reflex 54 Hz – 20 kHz (-10DB)

The TRx115N is a trapezoidal, 2-way multi62 Hz – 18 kHz (-3 dB) WORLDis TRADE DRIVE SAN DIEGO, CA multi USA 92128 CARVIN.COM (USA) CARVINWORLD.COM The 12340 TRx115N a trapezoidal, 2-way Coverage Pattern: 60H x 40V Features purpose The Neodymium purpose Main Main or or Monitor. Monitor enclosure. The Crossover: 2-Way with Speaker Guard™ HF ♦ Very15-inch Powerful woofer and Medium throw Trapezoid design features a horn 3-inch voice protection trapezoidal design and 60x40 HF allows Crossover Frequency: 2.5 k Hz ♦ Passive full range or Tri-amp crossover multiple cabinets to work together. high coil that provides punch andThe definition. Power: Continuous / Program / Peak ♦ Dual power, Heavy-Duty Neodymium 15-inch Woofer lightweight Neodymium 15-inch woofer Full Range 600w /1200w /2400w The 60x40-degree andwith 38-degree features 3-inch voice a ♦ Titanium 2-inchaexit, 3-inchHF VC,horn HF coil driver Recommended Amplifier Power: 800 – 1600w enclosure tiltweather makes thecapacity TRx115N power500w/1000w peak power ♦ Black DuraTex™ resistant finishthat aproSensitivity (1w @ 1m): 100dB vides all the from punch 2and definition necessary. Maximum SPL: 128dB ful monitor to 10 feet back. The 38 degree tilt makes the TRx115N a pow-

LF Driver: HF Driver:

Application erful stage monitor from 2 to 10 feet back. The

Nominal Impedance full range: system provides 8 flypoints for overhead susBi-amp LF: The TRx215N is designed to stand alone as aoffull range sound pension. The enclosure is constructed CNC Bi-amp HF: reinforcement loudspeaker andHardwood can be coupled TRx218 for machined multi-ply with with heavy Enclosure: a four waygauge extended Effective both permasteel low-end powder system. coated front grills.forThe Suspension/Mounting: includes 4 pin NL4 Speakon connent and crossover portable applications, it comes with handles, rubber Finish: on FR4 double access. sided circuit footpads, nectors and NL8mounted connectors for tri-amp Transport: boards for solid construction and durability. Grill: Carvin’s Applications include:exclusive Speaker Guard™ HF TRx115N protection uses a self resetting relay ♦ LargeDriver Club system TRx115N horizontal Connectors: the HF driver 10 dB protecting verticle ♦ Largecircuit Housetoofdim Worship Dimensions (H x W x D): the voice coil from excessive power. The ♦ Outdoor system benefits are the driver is not turned off losing Net Wt: all the high frequencies, the circuit resets as Rigging Accessories: soon as the high frequency content is back to normal levels.

Description

TRx215N

15-inch Neodymium 3-inch VC 1-inch exit Neodymium 2-inch VC 8 ohms 8 ohms 600w /1200w /2400w 8 ohms 60w /120w /240w 18mm Multi-Ply Hardwood 1-3/8-inch pole mount cup 8 captive 3/8in –16 nut fly points Black DuraTex™ 2 Recessed Handles Black powder coated steel Acoustically Transparent Foam Backing Two NL-4 Neutrik Speakon’s 27 in x 19 in x 15.5 in 685 mm x 485 mm x 395 mm 45 lb (21 kg) TCSHK10 3/8-16 Eyebolt TCSHK15 3/8-16 Quicklink™

Specifications TRx215N

12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128

CARVIN.COM (USA)

CARVINWORLD.COM

System Type: Dual 15-inch 3-Way, bass-reflex The TRx215N is our enclosure most powerThe TRx215N is our most powerful Frequency Response: 50 Hz – 20 kHz (-10DB) with dual 15-inch and a 2-inch HF dual driver. The ful enclosure with 15-inch 57 Hz – 18 kHz (-3 dB) trapezoidal design 60x40HF horn enables Coverage Pattern: 60H x 40V and a and 2-inch HF driver. The trapmultiple cabinets to work side by side. The Crossover: 3-Way with Speaker Guard™ HF ezoidal design andlightweight 60x40 HF horn protection system features two high power, Crossover Frequency: 2.5 k Hz multiple cabinets to work Neodymium enables 15-inch woofers with 3-inch voice Power: Continuous / Program / Peak coils and a 2-inch exit,side. 3-inchThe voice coil tita-features side by system Full Range 1200w /2400w /4800w nium HF driver for continuous 1000w/2000w Recommended Amplifier Power: 1600 – 3200w two high power, lightweight peak power. There is also a full range internal Sensitivity (1w @ 1m): 100dB Neodymium 15-inchtriwoofers with crossover with full driver accessible Maximum SPL: 131dB LF Driver: Dual 15-inch Neodymium 3-inch VC ampling capabilities a Neutrik 3-inch on voice coils NL8 and conneca 2-inch HF Driver: 2-inch exit Neodymium 3-inch VC tor. Twelve fly points are provided for titanium overexit, 3-inch voice coil HF Nominal Impedance full range: 4 ohms head suspension. The enclosure is conTri-amp LF: 8 ohms 600w /1200w /2400w driver. There is also a full range structed of CNC machined multi-ply Hardwood Tri-amp MF/LF: 8 ohms 600w /1200w /2400w internal crossover with font full driver with heavy gauge steel powder coated Tri-amp HF: 8 ohms 100w /200w /400w Enclosure: 18mm Multi-Ply Hardwood grills. The crossover includes 4 pin NL4 accessible tri-ampling capabiliSuspension/Mounting: 12 captive 3/8in –16 nut fly points Speakon andties 8 pin Speakon mounted on onNL8 a Neutrik NL8 connector. Finish: Black DuraTex™ FR4 double sided circuit boards for solid conTransport: 6 Recessed Handles fly Carvin’s points are provided struction andTwelve durability. exclusive Grill: Black powder coated steel for overhead Power: Speaker Guard™ HF Driversuspension. protection uses a Acoustically Transparent Foam self resetting1200w relay circuit to dim the HF driver Backing continous, 2400w proConnectors: Two NL-4 Neutrik Speakon’s 10 dB protecting the voice coil from excessive gram, 4800w peak. 8 Ωs. Two NL-8 Neutrik Speakon’s power. The benefits are the driver is not Dimensions (H x W x D): 45.5 in x 19 in x 21 in turned off losing all the high frequencies, the 1155 mm x 480 mm x 535 mm circuit resets as soon as the high frequency Net Wt: 99 lb (45 kg) TRx215N content is back to normal levels. Rigging Accessories: TCSHK10 3/8-16 Eyebolt

www.carvinworld.com

12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128

TCSHK15 3/8-16 Quicklink™

CARVIN.COM (USA)

CARVINWORLD.COM

♦ ♦ ♦ ♦ ♦ ♦

Medium Throw Trapezoid design Passive full range or Tri-amp crossover Heavy-Duty Neodymium 15-inch Woofer Heavy-Duty 8-inch horn loaded MF driver Titanium 1-inch exit, 2-inch VC, HF driver Black DuraTex™ weather resistant finish

Application

TRx153N The TRx153N is our finest 3-way enclosure featuring a

The TRx153N is designed to stand alone as a full trapezoidal range sound design with a 60x40 high and mid frequency horn loading. This trapezoidal design feareinforcement loudspeaker and to couple with our medium TRx218N throw for a four way extended low-end system. Effective fortures both permaa 15-inch Neo driver, 8-inch midrange, and 1-inch nent and portable applications, it comes with handles, rubber exit titanium HF driver. The system features a full range footpads, and an NL8 connector for Tri-amp access.

internal crossover with full driver accessible tri-ampling capabilities on a Neutrik NL8 connector. There are 12 fly points for overhead suspension. Power: 600w continous, 1200w program, 2400w peak. 8 Ωs.

Applications include: ♦ Large Club System ♦ Outdoor Medium Throw 100+Feet ♦ Large House of Worship

Specifications TRx153N System Type: Frequency Response:

Description The TRx153N is our finest 3-way enclosure featuring a trapezoidal design with a 60x40 high and mid frequency medium throw horn TRx153N without grill loading. This trapezoidal design features a 15inch Neo driver, 8-inch midrange, and 1-inch exit titanium HF driver with a total 600w/1200 peak power capacity. The system features a full range internal crossover with full driver accessible tri-ampling capabilities on a Neutrik NL8 connector. There are 12 fly points for overhead suspension. The enclosure is constructed of CNC machined multi-ply Hardwood with heavy gauge steel powder coated front TRx153N grills. The crossover includes 4 pin NL4 Speakon and 8 pin NL4 Speakon connectors mounted on FR4 double sided circuit boards for solid construction and durability. Carvin’s exclusive Speaker Guard™ HF Driver protec8-pin NL8 Neutrik™ connector tion uses a self resetting relay circuit to dim switchable to triamping the HF driver 10 dB protecting the voice coil from excessive power. The benefits are the driver is not turned off losing all the high frequencies, the circuit resets as soon as the high frequency content is back to normal levels.

Coverage Pattern: Crossover: Crossover Frequency: Power: Full Range Recommended Amplifier Power: Sensitivity (1w @ 1m): Maximum SPL: LF Driver: LF Driver: HF Driver: Nominal Impedance full range: Tri-amp LF: Tri-amp MF/LF: Tri-amp HF: Enclosure: Suspension/Mounting: Finish: Transport: Grill: Connectors: Dimensions (H x W x D): Net Wt: Rigging Accessories:

TRx118N

12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128

CARVIN.COM (USA)

15-inch 3-Way, bass-reflex 50 Hz – 20 kHz (-10DB) 60 Hz – 18 kHz (-3 dB) 60H x 40V 3-Way with Speaker Guard™ HF protection 500, 2.5 k Hz Continuous / Program / Peak 600w /1200w /2400w 800 – 1600w 100dB 128dB 15-inch Neodymium 3-inch VC 8-inch Neodymium 1.75-inch VC 1-inch exit Neodymium 2-inch VC 4 ohms 8 ohms 600w /1200w /2400w 8 ohms 200w /400w /800w 8 ohms 60w /120w /240w 18mm Multi-Ply Hardwood 12 captive 3/8in –16 nut fly points Black DuraTex™ 4 Recessed Handles Black powder coated steel Acoustically Transparent Foam Backing Two NL-4 Neutrik Speakon’s Two NL-8 Neutrik Speakon’s 41.75 in x 20 in x 17.25 in 1060 mm x 510 mm x 440 mm 71 lb (32 kg) TCSHK10 3/8-16 Eyebolt TCSHK15 3/8-16 Quicklink™

CARVINWORLD.COM

The TRx118N is our finest lightweight single 18-inch subwoofer system. The high power, lightweight Neodymium 18-inch woofer features a 4-inch voice coil. Besides the outstanding deep bass performance, the weight has been reduced by 11 Lbs. compared to similar systems. A pole mount is featured for suspending a TRx115N or TRx12N. Power: 800w continous, 1600w program, 3200w peak. 8Ωs.

For Subwoofer Specs go to : www.carvinworld.com/trx TRx218N The TRx218N is our finest and lightest dual 18-inch subwoofer. The high power, lightweight Neodymium 18-inch woofers feature 4-inch voice coils. Not only does it provide thunderous bass—the system weighs 22 Lbs. less compared to similar ceramic systems. Power: 1600w continous, 3200w program, 6400w peak. 4 Ωs.

The TRx218N is the ideal match to the TRx153N for a 4-way system. Stack two TRx115’s, TRx215’s, or TRx153’s side by side on a side stacked pair TRx218’s for 120 degrees of uninterrupted coverage at optimum head level placement.

www.carvinworld.com

THE ULTIMATE MOLDED ENCLOSURES - HIFI SOUND, WEATHER RESISTANT, LIGHTWEIGHT See the LM’s in action at

Premium Snakes & Cables featuring Neutrik™ Connectors 8 RETURNS (SENDS) ON 16 & 24 CH MODELS ANTI-REFLECTIVE BLACK

SNAKE CABLES SK8-P SK16-P SK24-P

NEODYMIUM

PM10

Main-Monitor, Heavyduty 10” woofer & titanium horn driver. Pole mount, Speakon™, 200w continuous, 400w program, 800w peak. 8 Ωs

LM12

IUM

3-w NEODYM

LM153 with 6.5” NEO midrange shown with partial grill

LM15

300w continuous, 600w program, 1200w peak. 8 Ωs, 11kgs

475w continuous, 950w program, 1900w peak. 8 Ωs, 14kgs

LM153

Neutrik™ XLR

475w continuous, 950w program, 1900w peak. 8 Ωs, 15kgs

with clamp strain relief

CUSTOMER COMMENT

• The NEO LM12 and LM15 are high powered, high efficient loudspeakers with the capacity of 1200w & 1900w peak. The NEW LM153 3-w features a 6.5” Neo midrange driver enhancing vocals/instruments giving real-life studio sound to your audience. • High-end Neodymium drivers offer a greater range with higher dB output for the same wattage making them more efficient than their ceramic magnet counterparts • The huge 3 inch voice coil in the LM15 and LM153 is conservatively rated to sustain 1900w peak • The Neodymium drivers save up to 20 lbs per enclosure making the LM easy to carry (typical 15” 23kgs, LM15 is 14kgs). • Rugged water resistant virgin polypropylene enclosure. Won’t chip or crack. Drop tested at 9ft • The wide dispersion, asymmetrical high frequency horn offers maximum coverage from the first to last row • Carvin’s exclusive enclosure design facilitates 30 degrees up and 45 degrees down and 90 degree horizontal dispersion – making them ideal for mains or monitors • Equipped with pole cups and 4 fly points, the LM’s are perfect for installations or on tour. • The LM advantage is it’s sonic qualities with its crystal clear highs and rock solid bass at high levels

Somehow Carvin has put the full sound, sonic clarity and balance of recording studio monitors into a rugged, reliable and lightweight package on par with the best professional live sound touring gear. Whether you use them for PA mains, or stage monitors, they will never let you down...Recently while I was using them for sound at an airshow, a large jet taxied a little too close and blew one over while it was high atop a stand. I ran over, picked it up, put it back on the stand and it looked and sounded like it did the day I took it out of the box. Don (Dondi) Weiss

LM15A

Bi-amped: 700w peak, 350 RMS,18kgs • Bi-amped/Tri-amped & time-aligned for greater clarity • Accepts input from any mixer to the XLR bal. input • 3 CH PA/acoustic system for mic, instrument & MP3 • Direct connection from your music source (mixer) • IN and OUT XLR’s for daisy chaining • 3-band EQ with mid sweep for stage monitor tuning or acoustic instruments • Separate Instrument EQ featured on channel 2

C20PC CLOTH BRAIDED

LINE

PHANTOM POWER

LINE

PHANTOM POWER

LINE

1- 8

MIC

GROUPS

LINE

EFF SW

PHONES

MIC

MON 2

MON 3

TAPE OUT

MON 4 L

+12 +6 0 -6

MUTE

PFL

1-2

3-4

+12 +6 0 -6

-24

MUTE

PFL

1-2

3-4

+12 +6 0 -6

-24

MUTE

PFL

1-2

3-4

-50

+12 +6 0 -6

-24

-50

MUTE

PFL

1-2

3-4

+12 +6 0 -6

-24

MUTE

+12

PFL

1-2

3-4

0 -6

-24

-50

MUTE

+12

PFL

1-2

3-4

0 -6

-24

MUTE

+12

PFL

1-2

3-4

0 -6

-24

MUTE

+12

PFL

1-2

3-4

-50

0 -6

-24

-50

EFF

MUTE

+12

PFL

1-2

3-4

0 -6

-24 -30 -50

MUTE

PFL

+12 +6 0

1-2

3-4

-6

-24 -30 50

MUTE

PFL

+12 +6 0

1-2

3-4

-6

-24 -30 50

MUTE

+12

PFL

+6 0

1-2

3-4

-6

-24 -30 50

MUTE

PFL

+12 +6 0

1-2

3-4

-6

-24 -30 50

MUTE

+12

PFL

+6 0

1-2

3-4

-6

-24 -30 50

Neutrik connectors, low-noise oxygen free copper wire for superior performance.

5’ 15 ga speaker cable 10’ 15 ga speaker cable 25’ 15 ga speaker cable 50’ 15 ga speaker cable

3’ shielded 1/4” patch cable 10’ shielded 1/4” patch cable 20’ shielded 1/4” instr cable 20’ braided 1/4” cable 20’ shielded rt. angle 1/4” cable

Neutrik™

heavy-duty 12 gauge Speakon™ cables

+12

PFL

+6 0

1-2

3-4

-6

-24

OFF

MON 1

MON 2

OFF

MON 1

MON 3

TO MONITORS ECHO REGEN

EQ 2 LEFT / MON 1

RIGHT / MON 2

+18 +12 +6 0

5 6 34 2

B CHOR ER

-6 -12 -18 -24 -30

5 6 34 2

PARAMETER FLANGE SPEED

CHORUS REV LEVEL

DECAY

SP8250

PEAK

16K

B CHOR ER

SELECT

REVERB DAMPING

TIME

TAPE IN

RTN 3

MUTE

PFL

1-2

DEPTH

+12

MON 4

PFL

+12

PHONES

RIGHT

6 PFL

MONO

MON 3 LEFT

RIGHT

6 PFL

MON 2 LEFT

RIGHT

6 PFL

MON 1 LEFT

RIGHT

MONITORS

RTN 4

LEFT

PFL

L-R 3-4

L-R

-30 50

PARAMETER

RETURN

PAN

R SIG PEAK

-12 L-R

4 5 6

SELECT

2 C

MUTE

POWER EQ 1

C1644

15 -

EFFECTS 2

3 2 1

RETURN 0

500

EFFECTS 1

3 2 1

MUTE

1 5

-12 L-R

14 -

MUTE 10

4 10

EFF

250

24-BIT DUAL STEREO EFFECTS PK

PAN

R SIG PEAK

125

2 10

12+ 8 4 0 4 8 12-

CONCERT SERIES 12+ 8 4 0 4 8 12-

3 10

1 5

MONO

TAPE IN RTN 4

c +12 8 4 0 4 8 –12

4 10

EFF

100 5k

MID LOW

PAN

R SIG PEAK

-12 L-R

13 -

MON

3 10

2 10

3L RETURN 3R

EFF 2

+12 8 4 0 4 8 –12

LO CUT

FREQ

-15 +15

2 0

4 1 5

EFF 1

0 50 GAIN 0

-15 +15

EFF

100 5k

MID LOW

PAN

R SIG PEAK

-12 L-R

12 -

MON

2 10

FREQ

-15 +15

1 5

-12 L-R

11 -

4 10

EFF

INSERT

LO CUT

-15 +15

PAN

R SIG PEAK

100 5k

MID LOW

MON

2 10

0 50 GAIN 0

LO CUT

FREQ

-15 +15

3 10

1 5

INSERT

0 50 GAIN 0

-15 +15

4 10

EFF

100 5k

MID LOW

PAN

-12 L-R

10 -

MON

3 10

2 C

R SIG PEAK

FREQ

-15 +15

2 0

INSERT

LO CUT

-15 +15

2 3

1 5

100 5k

MID LOW

MON

EFF

PAN

R SIG PEAK

-12 L-R

0 50 GAIN 0

LO CUT

FREQ

-15 +15

2 10

INSERT

0 50 GAIN 0

-15 +15

-30

4 10

1 10

PAN

-12 L-R

-30

R SIG PEAK

100 5k

MID LOW

2 10

MON

1 5

FREQ

-15 +15

3 10

4 10

EFF

INSERT

LO CUT

-15 +15

PAN

R SIG PEAK

-12 L-R

-30 -50

2 10

MID LOW

3 10

1 5

100 5k

MON

4 10

EFF

PAN

R SIG PEAK

-12 L-R

2 10

-15 +15

-15 +15 5

0 50 GAIN 0

LO CUT

-15 +15 FREQ

MID LOW

-30

EFF

100 5k

MON

1 10

PAN

R SIG PEAK

-12 L-R

-30 -50

2 10

3 10

1 5

-15 +15

-15 +15 5

0 50 GAIN 0

LO CUT

FREQ

MID LOW

INSERT

0 50 GAIN 0

-15 +15

100 5k

MON

4 10

EFF

PAN

R SIG PEAK

-12 L-R

2 10

-15 +15

-15 +15 5

3 10

MID LOW

MON

INSERT

1k FREQ

100 5k

-15 +15 5

4 EFF

-30

1 10

PAN

-12 L-R

-30

R SIG PEAK

-15 +15

LOW

2 10

MID

INSERT

LO CUT

HI 1k

FREQ 100 5k

MON

1 5

-15 +15

-15 +15 5

4 10

EFF

PAN

R SIG PEAK

-12 L-R

-30 -50

2 10

3 10

-12 L-R

EFF

PAN

R SIG PEAK

MID LOW

0 50 GAIN

LO CUT

HI 1k

FREQ 100 5k

MON

0 50 GAIN

LO CUT

HI 1k

-15 +15

-15 +15 5

4 10

1 10

2 10

-30 -50

EFF

-12 -24

4 10

1 10

PAN

R SIG PEAK

MID LOW

INSERT

0 50 GAIN

LO CUT

HI FREQ

100 5k

MON

3 0

2 C

3 0

4 1

2 0

-15 +15

-15 +15 5

HO RE V EC

2 10

EFF

MID LOW

INSERT

0 50 GAIN

1k FREQ

100 5k

MON

HO RE V EC

-15 +15

-15 +15 5

INSERT

HI 1k

FREQ 100 5k

MID LOW

MON

LO CUT

HI 1k

FREQ

-15 +15

-15 +15 5

0 50 GAIN

LO CUT

HI 1k

100 5k

MID LOW

INSERT

0 50 GAIN

LO CUT

INSERT

0 50 GAIN

LO CUT

INSERT

0 50 GAIN 0

FREQ

MON

INSERT

-15 +15

9-16

MIC

MON 1

INSERT

-15 +15

FLANG US

Top View

C5S C10S C25S C50S

SP64 FLANG US

Neutrik™

INSTRUMENT AND LINE CABLES C3P C10P C20P C20PC C20PR

Turn for Monitor applications

CVL12 CVL15

1/4” 15GA SPEAKER CABLES

heavy-duty 15 gauge speaker cables

C20PR

NL4/NL8

Optional CLV12 or CLV15 (includes LM153) The cover features a front flap and rear access for cable connections. Keeps your cabinet partially covered in bad weather

3’ bal. shielded mic wXLR’s 10’ bal. shielded mic w XLR’s 25’ bal. shielded mic w XLR’s 50’ bal. shielded mic w XLR’s

C10P

Optional Wall mount bracket LMUB

Fly Point

C3XLR C10XLR C25XLR C50XLR

fully insulated connections

Bi-amped: 700w peak, 350 RMS, 15kgs

Optional dual mount S5 Optional adjustable pole S4

SS4

MIC AND LINE XLR CABLES

Neutrik™ 1/4”

LM12A

ACTIVE POWERED MODELS

SS5

Heat shrink for added strain relief

ACTIVE POWERED 12” & 15”

3 Channels: Mic,Instrument,CD/iPod,or line input for mixer

Speakon™ & 1/4”

8 CH + 4 returns—100’ 16 CH + 8 returns—100’ 24 CH + 8 returns—100’

• Anti-Reflective black connectors • Aluminum black extruded enclosure • Premium Neutrik XLR connectors • Braided steel strain-reliefs • Heavy 22 ga oxygen free copper wire • SK16P & SK24P with 8 XLR send/returns

Features Premium Neutrik Connectors NEODYMIUM

Go online for more adapters

-12

-12 -24

-12

-24

-30

-12

-24

-30

-50

-12

-24

-30

-50

-24

-30

-50

MONO

-30

MON 1-2

-50

MON 3-4 METERS

L R

www.carvinworld.com

NL4 Speakon™ 4-conductor NL8 Speakon™ 8-conductor SP64 Speakon™ coupler SP8250 250’ 12ga 8 conductor spool

www.carvinworld.com

PRO5TL PRO10TL PRO25TL PRO50TL PRO100TL

HIGH CURRENT 12 GA SPEAKON - 4 cond. CABLES

5’ 10’ - 4 cond. 25’ - 4 cond. 50’ - 4 cond. 100’ - 4 cond.

EM900 IN-EAR PERSONAL MONITOR SYSTEM EM901 top controls

EM902

Whether you’re playing live or rehearsing, you need to hear yourself to be your best. That’s what the EMS900 in-ear personal monitor system is all about. With the EM900 you replace your floor wedges hearing everything in hi-fidelity mono or stereo. You can use up to 16 complete EM900 systems simultaneously on stage and “any” number of EM901 stereo receivers on the same frequency. Simply the best, rugged “in ear” system on the market today at any price. Hear yourself like never before - especially at lower volumes • More selectable frequencies, 960 channels. Articulate sound from the 20Hz to 20k Hz frequency response. Built in dynamic limiter keeps the sound pure and intelligible. The EM901 receiver offers a personal “Pan” control, allowing the mix of two independent signals, mono,or stereo - each performer can adjust a 2 channel mix in their ears! LCD display on both the transmitter and receiver – including low battery . PLL (phase lock loop) eliminates annoying static - no squelch control required. Flat response earbuds with 3 sizes of soft earbud tips. Braided cable and clear driver enclosures for reduced audience visibility. Balanced XLR inputs • Sturdy aluminum case and belt clip – not plastic

DYNAMIC AND CONDENSER MICS

EM900 IN-EAR SYSTEM

M50

EM901 960 CH receiver, EM900 960 CH Transmitter, EM902 Earbuds

EM901 EXTRA RECEIVER (9v battery not included) EM902 EXTRA EARBUDS

with 3 sizes of soft earbud tips

M67

UNIDIRECTIONAL DYNAMIC VOCAL MIC

DRUM MICS

The UX1000 is our finest wireless system featuring 960 user selectable channels with diversity UHF receivers. Superb tone, anti-feedback control, low battery indicator and assignable groups are just some of the features of the UX1000. Select either the UX1000-MC hand held mic or the UX1000-BP belt-pack transmitter. Step up to a wireless system that will meet all your expectations.

System: Diversity- PLL Synthesized, Stability: ± 0.005%, Image Rejection: >60 dB, THD: ≤1% @ 1kHz, RF Sensitivity: -107dBµ for 12 dB S/N AD, Audio Output: -12 dBµ / 800 Ω -unbalanced, Output Conn.: Unbalanced 1/4” phone jack, Balanced XLR, Steel case, 8.3” W x 1.6” H x 5.4” D, Net Weight: 2.3 lbs, Warranty: 90 days, batteries not included.

SPECIFICATIONS: 50 Hz to 19 kHz. S/N ratio: 101dB, Receiving

UX1000-BP

Body pack and UX1000 receiver • UBP1000 body pack

Order instrument cable, headset mic or lavalier mic separate

UX1000-MC

Hand Held Mic and UX1000 receiver

BASS DRUM MIC

960 CHANNELS 4 USER GROUPS

To take the kind of abuse that I tend to dish out on stage to my gear... Carvin wirelesses must be made of steel. Cause thats what it seems like. Sturdy and absolutely the most reliable piece of equipment I own. Hands down. – Mike D. Killswitch Engage

D42

SNARE-TOM TOM MIC

3 MIC KIT: One D44, Two D42

M90S

UNIDIRECTIONAL CONDENSER MIC

DMK7

7 MIC KIT: One D44, Four D42, Two M90S DRUM MIC SPECIFICATIONS: FREQUENCY RESP.: D42: 80Hz to 13kHz D44: 20Hz to 10kHz, MAXIMUM SPL (@1%THD) D42: >130dB, D44: >140dB

CONDENSER MIC

ACCESSORIES FOR UX & USM SYSTEMS UX1000 rear

UX-LP1

UX-HM2

Headset mic for body packs Lavalier mic for body packs

UX-GT

Mini XLR to 1/4” instr. cable for body packs

UX-DR 1U rackmount kit for 1 or 2 UX16 or UX1000

www.carvinworld.com

The CM87S is a high quality, multi-purpose Large Diaphragm Studio Condenser mic. It features a cardioid pattern with a Gold Sputtered, 6 micron element and premium, noiseless FET electronics. A 10 dB pad switch handles hot signals and a low cut switch reduces rumble. Ideal for stunning vocals as well as capturing nuances of an acoustic guitar. A max. SPL of 145dB (with 10dB pad) SPECS: Freq. Resp.: 30Hz20 kHz, Dynamic Range: 133 dB, Output Imp.: 200 Ωs, Pad Switch: 10dB, Low Cut Switch: -6dB @ 80Hz , Shockmount: eliminates low freq. vibration & handling noise (-72 dB below 40Hz), Power Supply: 48V (Included) Cable: Oxygen-free 30 ft. cable Mic Dimensions: 7.5”L x 2.75”W, Case: Custom flight case

FREE 20ft XLR mic cable The new M90S is offered for either choir or drums • Extremely flat response and wide frequency range of 30Hz to 20kHz will provide accurate results in recording and sound reinforcement • High sensitivity for use in distant miking • Excellent for overhead drums • max SPL at 132dB • -10dB pad switch for use with extremely loud sources. Low-cut switch reduces “boomy” low frequencies. Cardioid polar pattern gives maximum rejection of off-axis sounds for excellent feedback control.

DMK3

Together with Carvin’s M90’s as overhead mics, the D44 and D42 unidirectional dynamic mics are all you need to mic your drums. Both models can handling high sound pressure levels and the unidirectional cardioid polar pickup pattern will reject unwanted sound.

UNIDIRECTIONAL DYNAMIC VOCAL MIC

FREE 20ft XLR mic cable

EM-DR 1U rackmount kit

UHF UX1000 MIC/BELTPACK

M68

UNIDIRECTIONAL DYNAMIC INSTRUMENT MIC

FREE 20ft XLR mic cable

D44

The M68 microphone is our most popular unidirectional handheld dynamic microphone. It is renowned for its presence and crisp output for live vocal applications. • Frequency response is 45Hz to 15kHz • Built-in foam wind screen for excellent pop, breath and wind noise rejection • Cardioid polar pattern for excellent off-axis performance and feedback control.

The M67 microphone is a unidirectional dynamic instrument microphone. It is ideal for use on guitar amps, and many instruments for both live and recording use • Frequency response is 45Hz to 15kHz • Built-in foam wind screen for excellent pop, breath and wind noise rejection • Cardioid polar pattern for excellent off-axis performance and feedback control. • Designed for high sound pressure levels direct cabinet miking.

The M50 is Carvin’s “value priced” professional vocal mic that is not to be compared with the poor performance of other $49 mics. Unidirectional with a cardioid polar pattern. Features a convenient on/off switch built in foam wind screen for pop, breath & wind noise rejection. Freq. Resp. is 50 Hz to 14 kHz.

CM87S

CONDENSER STUDIO MIC Optional pop screen WS87:

Case Included!

TUBE CONDENSER MIC The CTM100 is perfect for recording both critical vocals and instruments for the warmest, fullest, smoothest sound. The dual diaphragm, multi-pattern design gives you 9 different polar patterns to get the perfect sound every time! You will not need to EQ this mic - it sounds awesome right out of the box! The CTM100 features dual 1” gold sputtered 5 micron diaphragms in a special shock mounted capsule and a vacuum tube pre-amp. The included power supply houses the control for the 9 different polar patterns. The shock-mount suspension virtually eliminates vibration and handling noise. If you want your recorings to sound as warm and full as your favorite artist, the CTM100 is the ultimate in classic sound reproduction! SPECS: Freq. Resp.: 20 Hz - 20 kHz, Dynamic Range: 133 dB, Output Imp.: 300 Ωs, Power Supply: 48V Cable: 30 ft. Gold 7-pin cable, Mic Dimensions: 9.75”L x 2.75”W Includes: travel case, foam windscreen, shockmount suspension, XLR cable and carry pouch for mic.

CTM100

Case Included!

TUBE CONDENSER STUDIO MIC