SPECIFICATIONS 8RT TRACTORS POWER Rated PTO power (hp SAE) at rated engine speed† * Rated engine power PS (hp ISO) at rated engine speed (ECE-R120)* Max engine power PS (hp ISO) at max engine power speed (ECE-R120)* Intelligent Power Management* (Available) PTO torque rise PTO power bulge ENGINE Manufacturer (US EPA Final Tier 4) Rated speed Aspiration Filter, engine air Displacement Bore and stroke Compression ratio Lubrication Filter, oil TRANSMISSIONS
8RT 310 246 hp (183 kW) 310 hp (228 kW) 341 hp (251 kW)
8RT 370
273 hp (203 kW) 300 hp (223 kW) 340 hp (250 kW) 370 hp (272 kW) 374 hp (275 kW) 407 hp (299 kW) 35 additional engine horsepower PS (hp ISO) at 2,100 RPM (rated speed) 40% 10%
8%
Available: (Forward: 42 km/h @ 1600 ECO erpm; Reverse: 30 km/h)**
Standard: (Variable forward: 0.05 - 42 km/h, 42 km/h @ 1550 ECO erpm Varable reverse: 0.05 - 21 km/h)**
Track width Drive wheel width Midroller width Midrollers STEERING Hydraulic power steering w/ electronic back-up pump HYDRAULIC SYSTEM Rear selective control valves with 1/2 in ISO couplers Rear selective control valves with 3/4 in and 1/2 in ISO couplers Main pump, axial piston (displacement) Maximum pressure Rated flow, 85cc pump Available flow at a single rear SCV 3-POINT HITCH - REAR Lift capacity per OECD: 24 inch / 610 mm behind the coupler Category 4N/3 with Quik-Coupler and sway blocks Category 4N/3 with Quik-Coupler and sway blocks REAR POWER TAKE OFF (PTO) 1-3/4 in (45 mm), 20-spline, 1,000-rpm PTO speed @ engine RPM BRAKES Description CAPACITIES Fuel tank DEF tank WHEELBASE Description AVERAGE BASE WEIGHT e23, 30in tracks, 5 SCVs, CAT4 hitch, HD drawbar, shipping fuel IVT, 18in tracks, 5 SCVs, CAT4 hitch, HD drawbar, shipping fuel
72 - 120 in (1829 - 3048 mm) 112 - 160 in (2845 - 4064 mm) Friction 16 in (406 mm), 18 in (457 mm), 24 in (609 mm), 25 in (635 mm), 30 in (762 mm) 15 in (381 mm), 24 in (610 mm) 15 in (381 mm), 24 in (610 mm) Polyurethane or rubber Tilt & telescope steering with memory function Ratio/turns lock-to-lock: 1.8, speed sensitivity adjustment Closed-center, pressure/flow compensated system with load sensing Standard: 4; Available: 5 - 6 Available: 5 (SCV 1: 3/4 in coupler, SCV 2-5: 1/2 in couplers) Single pump 85cc 2,958 psi (20,400 ± 300 kPa) 60 gpm (227 lpm) 35 gpm (132 lpm) 1/2 in coupler, 42 gpm (159 lpm) 3/4 in coupler Electrohydraulic sensing Available: 15,200 lb (6894 kg) Standard: 20,000 lb (9072 kg) Independent, electrohydraulic switched via oil-cooled multi disk clutch Standard 1000 PTO rpm @ 2000 engine rpm Power, disc 202 gal (764 L) 8.3 gal (31.3 L) 97.5 in (2477 mm) 36,500 lb (16600 kg) 35,850 lb (16200 kg) 34,400 lb (15600 kg)
Specifications and design subject to change without notice. Pre-production models shown. * John Deere Standard RES10080, SAE Standards J1995. ** Base tractor configuration on level ground, with specified tires groups above at mfg recommendation for tire pressure. erpm, are load dependent. † PTO power for IVT models. Does not include available equipment losses. Nominal data is metric. Standard data is converted from metric data. Use metric for all calculations.
28
300 hp (223 kW) 410 hp (302 kW) 443 hp (326 kW)
John Deere PowerTech™ PSS 9.0L 2,100 rpm Single turbocharger, variable geometry turbo Dual turbochargers, variable geometry turbo with fixed geometry turbo in series Dual stage 549 cu in (9.0L) 4.66 in (118.4 mm) x 5.35 in (136 mm) 16.0:1 Full-pressure, full-flow filtration with bypass Replaceable cartridge style oil filter
Drive type
e23, 25in tracks, 5 SCVs, CAT4 hitch, HD drawbar, shipping fuel
8RT 410
John Deere PowerTech™ PVS 9.0L
e23 PowerShift 40K, 26 mph (40 km/h) with Efficiency Manager™ Infinitely Variable Transmission (IVT™) 26 mph (40 km/h) REAR AXLES Tread spacing, standard Tread spacing, available
8RT 340
NA
