Micro Studio DS1a

PROJECT

DATE

SCALE

DRAWING NAME

DRAWING NO.

Side View

Front View

PORTFOLIO Wade Wilson's apartment DRM - DS1A - 2020

CONTENTS

KIT OF PARTS

MICRO STUDIO

CINESPACE

ITERATIONS 1-5 + REFLECTIVE TEXT

SITE EVALUATION

SCENE STILLS

URBAN CONTEXT

PLAN DRAWING

PRECEDENT STUDIES 1-3

MODEL

ITERATIVE SKETCHES ELEVATION DRAWINGS PLAN, SECTION DRAWINGS FUSION 360

USER EXPERIENCE CARD AND SKETCH UP MODELLING BREAK DOWN OF SPACE ELEVATION AND SECTION DRAWINGS AXONOMETRIC AND PLAN DRAWINGS PERSPECTIVE (AUTOCAD)

KIT OF PARTS

Iteration 1

This model focuses on using the elements to create one large central space, with a small open space above. From the rear (Left image) the model looks messy and is difficult to understand, I believe this is because of the use of putting multiple elements over one another. However from the side (Centre image) the model looks very neat and can be easily understood. Furthermore, from above (Right image) the model is very difficult to understand and looks very messy, again I believe this is because many elements have been placed over one another also because some elements have their sides exposed. Overall, I dislike this model due to it being so unorganised and not very practical. From this model I can take away a few things, the slanted ‘roof ’ could be further adapted to cover the above space, possibility of layering a few elements to give the model some depth. This would allow for some of the elements to be used else where. In addition, this model is very rectangular and doesn’t really have its own character.

Iteration 2

This model focuses on creating many separate spaces, these spaces vary with heigh, size and surroundings. From above (Right image) you can clearly see the separate spaces that have been created. In addition you can also see the different shapes that have been created by the outer elements of the model. From the rear (Centre image) of the model you can see how the model has an addition layer and also how some elements have been used in order to create a fan shape that starts from the ground and separates a part of the model. The left side (Right image) shows how an element has been used in order to create curved section. Overall, I like this model as it has lots of variation in shape, and the design is simple and clean looking. From this model I can take away a few things like how elements can be used to create curves which add shape to the model. Also how elements can be combined to create interesting shapes.

Iteration 3

This model focuses on using the elements to create different shapes for ‘roofs’ whilst also creating an open and closed space. The image on the left shows how you can layer multiple elements to create a unique slant, this design would not be practical as it only covers a small space.

Furthermore, you can also see the separation between the enclosed and open space. Multiple elements have been used to build the front of the model. The centre image shows how you can use larger elements in order to cover a larger space. This creates a shape that looks very clean and practical. The image on the right shows how the two ‘roof ’ spaces are different. The layered roof stays mostly flat and covers little space however the ‘roof ’ that uses larger elements. This also shows the height difference between the two. Overall, this is a good model for experimentation however practically it is not. This is because there is very little space and the front is very messy and hardly makes sense.

Iteration 4

This model focuses on creating two separate indoor spaces and an ‘antenna’ like feature. The image on the left shows the ‘antenna’ feature, this has been created using a variety of different elements. From the model the elements used look random. From this image you can also see the rear of one of the spaces. The centre image shows the two interior spaces, the spaces use a variety of random elements in order to work. The image on the right shows the model from above, from this we can see the make up of the ‘roofs’ and also some of the make up of the ‘antenna’ feature. Overall, I dislike this model because it has little to no character and the design is very random and messy.

Iteration 5

This drawing way without

Elevation and Plan Drawings Plan View

Do NOT sca

Top View

All written dim checked on s

DRAWING

REVISION

This model focuses on creating different spaces using a variety of different shapes. The front (Right image) of the model shows the use of a curved element in order to create an ‘entrance’. Also some elements have been used to create a ‘roof ’ (not shown on image). The rear left side (Centre image) shows multiple elements used to create the outer edge of the model. The rear uses large flat elements to build ‘walls’, this space has a ‘roof ’ that uses rectangular elements. The left side has a element that branches. From this image you can also see how the centre space has no ‘roof ’ this is create a variety of spaces. The rear right (Left image) of the model uses an element in order to create a small space on the outside of the model. From this angle you can also see the ‘roof ’ of both the rear corner and the entrance located on the front of the model in further detail. Overall, I like this model because it uses a variety of different spaces, shapes and heights. This is my favourite of the five models due to its variety.

PROJECT

DATE

SCALE

DRAWING

DRAWING

Side View

Front View

Site Evaluation

Site This image shows the main footpath that is used to reach the top of the Pike.

This image shows the site i have chosen. It is located on Rivington Pike, Chorley.

MICRO-STUDIO

This image shows The Pike Tower which is located behind the site.

This map shows the site from a birds eye view with contours and footpaths being visible. The site sits at 362m above sea level.

Urban Context Bolton City Centre

Precedent #1 Project Name: Location: Architect: Date:

Winter Hill TV Transmitter Station

Lostock Train Station

Site

Bolton University Stadium

Horwich

Lower Rivington Reservoir

Relocatable House (Prototype) Bath, England Invisible Studio March 2018

The aim of the project is to create a cost effective, versatile and usable space which could also be used as a kit of parts. This allows self-builders to easily adapt to the structure and to improvise. The space originally created was to be used domestically however it can function as the user requires. At the two gable ends there are interlocking polycarbonate panels to allow natural light into the space.

The exterior structure is clad with steel and corrugated fibreglass and the interior is lined with recycled sheets of shuttering plywood. At either end there is corrugated material which creates a small sheltered outdoor porch. Inside there is a main living space which takes up the whole base of the structure, in the centre of this space there is a gas stove with a toilet and a petite cooking area located in the largest parts of the structure. In addition to the main living space there are two sleeping platforms which can be accessed via ladders and also via a walkway one on the platforms.

This project inspires the design through its shape and use of windows.

The project shape is that of an elongated pentagon that has been extruded, this shape is aesthetically pleasing to look at and also practical in the way that it doesn’t allow for rain water to be collected. The use of windows allows natural light to flood the space and for the outside to be seen from within.

Sketches Design one is just a simple A-frame style with walls at 90 degrees to the base, there ae windows that allow for the space to be lit sufficiently.

Design two follows the precent a bit closer using the angled walls, the top of the design is semi-circular and allows for a large in set window towards the front of the design.

Design three follows the precent very slightly with the use of the walls at the base, and the apex shape which has been changed to fit the purpose. the apex has been cut in half and one half has been pushed back to create a separate space within. there are multiple windows to allow light into the spaces.

Design four again uses the angled base walls as in the precedent and three triangular sections that are joined together. The center section is used as a passage into the front of the build.

This creates individual spaces within the design.

Block, I. (2018). Low-cost micro home is made from timber and scavenged materials. Retrieved 10 November 2020, from https://www. dezeen.com/2018/03/31/invisible-studio-micro-mobile-home-trailer-architecture-bath-uk/

Precedent #2 Project Name: Location: Architect: Date:

Woodland Cabin Deciduous Wood (Not Specified) AR Design Studio Summer 2019

The aim of this project is to create a space to be used as accommodation for guests and as a separate space for the children. “The brief was to create a compact, off the grid, self-build ancillary space for the clients house, whilst also being of a simple design so work can be carried out by the client”. In addition to this, the allotted space was 25m2 and needed to sleep 4.

The initial design started as a 6x4m box, it was then manipulated to maximise the amount of floor space available. To begin with the roof was significantly pitched in order to create space for a mezzanine, then one side of the structure had its volume increased so that storage could be incorporated without losing much floor space. From here the front truss was angled towards the north west in order to create a sun trap within the building, this also created a small sheltered terrace. In plan there is a large terrace that has been formed that wraps around the side of the cabin.

Towards the front is a kitchenette, living and dining space that take use of the large window. At the rear of the building there is a set of bunks for the children and a double bed on the mezzanine level. From the sleeping areas there are small windows with views of woodland, the bunks for the children also have access to the terrace.

Architects, C. (2020). Woodland Cabin — AR Design Studio | Contemporary Architects Winchester. Retrieved 24 November 2020, from https://ardesignstudio.co.uk/woodland-cabin

Precedent #3

Sketches Design one is of very close resemblance to the precent as the design has great personality and shape. The front of the design is a large glass wall with a sliding door to access.

Design two is similar to the precedent however changed slightly, the design was inspired by placing the right side of the precedent on the ground and mirroring that which was created. The design was then scaled down with the window still being in place and the entrance to the design at the rear.

Project Name: Location: Architect: Date:

A45/ BIG Shandaken, United States Bjarke Ingels Group 2018

The project was a protype designed for KLEIN. The aim was to create a customisable inside and outs for future home owners. The design takes inspiration from the A-frame style cabin, known for its stee pitched roof and angled walls which allows rain to run off and also for its simple construction.

The project uses a square base with a twisted roof at 45 degrees in order to create more usable space within. The result of this is a crystal-like shape that gives the project an ever-changing appearance and a height of 13ft.

On the inside the project has exposed timber frame with insulating natural cork walls. The project uses handcrafted Nordic furniture to populate the space, including; a small kitechen designed by Københavns Møbelsnedker, a bed fitted with kvandrat fabric designed by Soren Rose Studio and other furniture designed by Carl Hansen. The bathroom is made of cedar wood with fixtures by VOLA.

Design three is again similar to the precedent, this time the walls have been straightened, a door has been added and a sky light has been added.

González, M. (2018). A45 / BIG. Retrieved 27 November 2020, from https://www.archdaily.com/894941/a45-big?ad_medium=office_landing&ad_name=article

Sketches Design one is of a similar shape to the precedent, the design uses the inverted pitched roof however doesn’t touch the base as the precedent does, instead the pitch stops half way down the design. This is to allow for additional space within and a different shape.

User Experience

Cardboard and Google Skeptch Up Modelling

This model has been prioduced from precedent 3, design 1.

This model has been prioduced from precedent 2, design 3.

This model has been prioduced from precedent 2, design 2.

Cardboard and Google Skeptch Up Modelling

This model has been prioduced from precedent 1, design 1.

Cardboard and Google Skeptch Up Modelling

This model has been prioduced from precedent 1, design 3.

Top View

Elevations and Section Drawing

2500

Side View (Right Side) 99°

A

3 1,3 1

34

2500

200

R

250

2240

2100 1000

2500

3500

720

2100 200

99°

440

550

2000

1500

,9

8 22

95

500

1000

714,29

1500

2000

500

3500

2201,45

9,

A

200

,37

,93

98

PATIO

M R O A O N R O D I E B AT X A L E

EA

05

3

°

/

40

,9 40

135

1500

This space is to be used for relaxing or as a bedroom, the space will have a single bed that can be transformed into a sofa. In addition to this due to the shape of the space the bed is able to have storage boxes that line the side of the bed, these can be used to store pillows, blankets, clothes, etc. This can been seen on the section drawing.

2600 1500

1500

1500

This space can be used for a range of things, its main use is as the entrance to the studio. However in the summer it can also be used as a space to relax outside and enjoy the weather.

675,53

27

34

22

1500

550

3500

WORKSPACE

2000

2000

1572,47

135 °

730

This space is used for work, the space will contain little furniture due to the size of the space. The space will have a desk, a chair and storage. The desk space will mainly be used for drawing and inspiration via the large window in front. The desk will span the length of the space (2.5 meters) and will have storage beneath on both sides (Figure 1).

98

9,

2500

95

Break Down of Space

200

120

1500

200

Figure 1

Scale 1:40

1500

4000

Front View

A

Section A-A

A

Axonometric and Plan Drawing

RE

AC RK

SP

BE LA DRO XT IO OM/ NA RE A

Plan View

E

Axonometric

Perspective Drawing

WO

Google Sketch Up Drawing

ACE

SP ORK

M/ ROO EA D E B AR ION T X ELA

W

R

Scale 1:40

Scale 1:50

Screen Stills - Deadpool 2

CINESPACE

Plan Drawing

Model

Wade Wilson's apartment