UK Power News - November/December 2021 by WIP Magazines

NOVEMBER DECEMBER 2021

THE EAGLE BUILDING, LONDON Powerhire supplied two 200kVA temporary generators to run in sync, providing a total of 400kVA to the building. Pages 16 The specialist high voltage engineering and contracting firm Smith Brothers, has been appointed to provide engineering, procurement, and construction (EPC) expertise to a portfolio of projects – designed to support the transition towards more sustainable power generation. The £78m programme – a joint venture between LMPH and Victory Hill – represents a commitment to fund innovative net zero flexible power generation projects in the UK. Under the scope of works, Smith Brothers will provide EPC support in relation to the pair of planned combined heat and power plants, which will bring together highefficiency, gas-fired engine technology with a carbon capture and re-use system – to provide a clean, net-zero, flexible, and dependable electricity solution for the UK. The Yorkshireheadquartered electrical engineering specialist will also act as the Independent Connection Provider (ICP) for the new 10MW, 33kV Western Power Distribution (WPD) loop connection at the Rhodesia site in Nottinghamshire. Once operational, the projects will

POWER TO THE FALKLANDS woodlands Power has supplied four gensets with upgraded controllers and motorised breakers for the MoD services.

SOUTH-WEST HOSPITAL GETS GENSET HELP The wB Power team installed 2 x 1650kVA Kohler generating sets + fuel tanks onsite in Cornwall in November 2021.

Page 26

Page 20

CENTIEL AD

£78m net zero flexible power generation scheme EPC services provided by Smith Brothers produce highly efficient flexible power, which will help secure the supply within the UK electricity grid and contribute to the growth in renewable generation capacity. Alan Hoyle, project manager, of Smith Brothers added: “This carbon capture project is the first project of its kind in the UK and represents the future of power generation – if we’re to achieve our nation’s net zero ambitions. As such,

NOVEMBER-DECEMBER 2021 UK Power NewS

we’re delighted to be joining such a powerhouse of organisations to deliver on this vital scheme.” Richard Lum, Co-CIO of Victory Hill Capital Advisors LLP said: "The UK harbours ambitious plans to hit net zero carbon emissions by 2050 and is rightly increasing capacity for renewable power generation.The aim of this portfolio is to ensure the UK electricity grid can meet growing demand and keep the lights on.”

UPS Service and Maintenance •24/7/365 Technical Support •Comprehensive Maintenance Packages •Nationwide Emergency Cover •Fan, Capacitor and Battery Replacements •Impedance Testing

www.centiel.co.uk

NEWS Publishing & Events Director: Richard Teasdale richard@wipmagazines.com Publisher/Sales Director: Neb Saric neb@wipmagazines.com Managing Editor: Aidan Turnbull aidan@wipmagazines.com

POWEREX 2022 will be held on on 8th December in London

Accounts Manager: Alison Williams accounts@wipmagazines.com Sales & Marketing Manager Sarah Hallows sarah@wipmagazines.com Far East Sales: Bob Liu Room 926, No.1 Building, Phase II No.100 Jinyu Road, Pudong Shanghai, China Mobile:+86-013817410089 Email: bob.liu@ronco.com.cn Austria & Germany agent Mario Dobresko power@wipmagazines.com Contributors. MWM, Smith Brothers, Perkins, Powerhire, WB Poqwer, Genesal UK, Woodlands Power, National Grid Electricity Transmission, Scottish Power Transmission, Iberdrola, Bells Power, Cenergist, Centiel, Centrica, Cummins, Dale Power Solutions, DTGen, GBE Bunds, KOHLER, Nova Innovations

The next PowerEx event will be held on Thursday 8th December, 2022, at the prestigious Park Plaza, Westminster Bridge, London. Commented Dave Andrews, Chairman of the Claverton Energy Institute: “The last time PowerEx Live was held in London it proved as Lively as its name. The organisers saw a good number of attendees and exhibiting personnel through the doors, with 12 top speakers and two separate Conference strands on CHP and Gensets.

**************** UK POWER NEWS Published by: Power Media International Group Ltd, The Courtyard, 30 Worthing Road, Horsham, West Sussex, RH12 1SL , UK. Tel: +44 (0)1403 888019 Fax: +44 (0)1403 220751 powermediagroup.co.uk © Worldwide Independent Power (ISSN 1468-7100). Subscription price £70 (UK), £140 (overseas) per year. Please send address changes to UK Power News, Power Media International Group Ltd 30 Worthing Rd., Horsham, West Sussex RH12 1SL, UK.

“One of the PowerEx speakers even delivered his lecture ‘virtually’ via Zoom as he couldn’t get to London because of Covid19 restrictions at that time. This was one of the best such professional power events I have attended in 2021.” He explains: “The ‘GENSET LIVE’ and ‘CHP & Renewables LIVE’ conferences will run parallel with prime exhibitor space available in adjoining rooms.” Power professionals everywhere will have the chance to network with experts in all fields of CHP, Data Centres, Renewable Energy, Poawer Industry Consultancy and - most importantly - Gensets. The choice of stands is allocated on a ‘first-comefirst-serve’ basis, so the organisers recommend that exhibitors get in their bookings early for the highlight of the UK’s Energy calendar.

UKPN DIARY £158 million compensation for cable delays for Western Link

he Western Link project, which required an investment of €1,200 million, now enables the transmission of renewable energy from Scotland to homes and businesses located in Wales and England by laying 850 km of high-voltage cable, 770 of which run under the sea. This month, National Grid Electricity Transmission and Scottish Power Transmission agreed to what is effectively a compensation package of £158 million for delays to this Western Link Project, following an investigation by Ofgem, the UK’s energy regulator. NGET and SPT own the licence for the project and contracted to deliver it. The link fell two years behind its expected delivery date of March 2017 to June 2019. Around £15m of the £158m will be paid into Ofgem’s Redress Fund. This is operated on its behalf by the Energy Saving Trust and allows companies to pay a sum of money to appropriate charities, trusts, organisations or consumers as a result of breaches of licence conditions. The remainder of the redress package will be in the form of reduced system charges. These charges are ultimately paid for by consumers as part of their overall electricity bills, so in theory consumers will benefit from this redress package through lower bills. Western Link is a transmission project worth around £1.2 billion, providing a major subsea electricity link between Scotland and Wales. The link is 422 km (262 miles) long, of which 385 km (239 miles) is under the sea, and was designed to transport electricity, often from green sources, between the two countries. It provides an additional 2250 MW of capacity and is crucial to helping Britain reach its targets of net zero greenhouse gas emissions. However, the two-year delay restricted renewable generators in Scotland exporting electricity to England and Wales, because at times there was not enough capacity to do so. This meant that National Grid ESO would have sometimes had to reduce the output from windfarm generators to protect the electricity system. This ultimately led to higher costs for consumers. Ofgem’s investigation found that the root causes of the delay were problems with manufacturing processes, installing the cables and commissioning tests. It acknowledged that NGET and SPT did not cause or exacerbate the delay, but it holds NGET and SPT ultimately responsible, as licence holders, for the delay caused by their supply chain.

All-Energy, the UK’s largest annual renewable and low carbon energy exhibition and conference

All-Energy- Wednesday 11 and Thursday 12 May 2022 at the Scottish Event Campus (SEC) Glasgow. All-Energy, the UK’s largest annual renewable and low carbon energy exhibition and conference, and the co-located Dcarbonise, are scheduled to take place on Wednesday 11 and Thursday 12 May 2022 at the Scottish Event Campus (SEC). All-Energy takes pride in being the UK’s largest low carbon energy and full supply chain renewables event for private and public sector energy end users. The next live edition of AllEnergy & Dcarbonise is taking place in May 2022 where we will be heading back to the SEC, Glasgow for our first face to face event in two years. All-Energy will offer an opportunity to meet, network and make connections with the renewable energy community with two days of uninterrupted business. Join us in Glasgow to drive your business forward in 2022 and beyond. In the meantime, gain exceptional insights and guidance from our Dcarbonise Week sessions, now available on demand. ahead of COP26 - find out what needs to be done to reach our net zero targets.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

NEWS EDF and JPMorgan Chase collaborate in the UK

PMorgan Chase and EDF, Britain’s biggest generator of zero-carbon electricity, have announced a collaboration to help power JPMorgan Chase’s UK offices with 100% renewable electricity in support of its commitment to carbon neutrality in its operations. As part of this effort, JPMorgan Chase’s electricity consumption will be matched to renewable generation on a 24/7 basis. Matching will take place on a half-hourly basis, through source-specific access to EDF’s 8 TWh of Power Purchase Agreement (PPA) portfolio. This bespoke agreement is thought to be a first for UK large business electricity supply. Such innovative structures will enable organisations to take a real-time view of their energy sourcing and associated carbon footprint. EDF will provide JPMorgan Chase with approximately 120,000 MWh of renewable electricity each year to power more than 3 million square feet of offices across the UK, which is the equivalent of powering nearly 33,000 households in the UK. The energy provided to JPMorgan Chase will be monitored utilising ClearTrace’s patented blockchain-based energy-tracking technology to ensure that the electricity consumed is matched digitally, in real-time, to renewable generation. JPMorgan Chase will have an accurate and auditable view of their carbon footprint, 24 hours a day, 7 days a week. Raghav Singh, Head of Large Business at EDF said: “We are delighted to be working with JPMorgan Chase and supporting them with their sustainability commitments. Thanks to our strength and expertise in renewable PPAs and supply, we have delivered an innovative, tailored solution for JPMorgan Chase. Zero carbon electricity will be essential for British businesses to achieve Net Zero and we are proud to be supporting our customers on their journeys, delivering solutions that meet their diverse requirements.” JPMorgan Chase has set a number of targets to drive progress on operational sustainability, including a commitment to maintain carbon neutral operations annually. The firm continues to support the development of renewable energy, including installing on-site renewable energy systems and executing long-term renewable energy procurement agreements, and has set a goal that these solutions will make up 70 per cent or more of their renewable energy procurement by 2025. Jon Denial, Chief Administrative Officer for JPMorgan Chase in Europe, the Middle East and Africa said: “We are pleased to collaborate with EDF to deploy this leading-edge technology, which gives us around-the-clock visibility into our energy consumption and the corresponding renewable generation across our entire UK portfolio. This construct sets a high bar for responsibility and transparency in renewable energy sourcing.”

NOVEMBER-DECEMBER 2021 UK POwER NEwS

EMEC Hydrogen chooses Genevos to provide new fuel cell power pack

Led by EMEC Hydrogen based in Orkney, HIMET is one of 55 projects selected for funding under the Department for Transport’s flagship Clean Maritime Demonstration Competition, delivered in partnership with Innovate UK. The project will explore solutions for decarbonizing ferries as well as poroviding energy for shoreside activities in ports. To decarbonize ferries, various solutions will be designed and demonstrated during this 7-month project including hydrogen storage, the supply of on-board auxiliary power using a hydrogen fuel cell, and also the application of hydrogen in a conventional

ferry propulsion engine.Genevos was chosen by EMEC Hydrogen to supply one of their recentlylaunched Hydrogen Power Modules (HPMs), which will be installed for demonstration purposes on the deck of an Orkney Ferries RoRo ferry, the MV Shapinsay. The HPM was selected primarily due to its ‘plug and play’ marinised concept, integrating both fuel cell systems and power management. Once project demonstration activities are complete, Genevos will support HIMET partners to facilitate uptake across the UK and further afield.

UK electricity demand likely to increase by 71.6 TWh with rise in electric vehicles The latest figures from Cornwall Insight’s ‘Benchmark power curve’ forecast project that by 2040 demand from electric vehicles will contribute an additional 71.6 TWh, 31 times higher than the current level of demand for electricity from electrified transport and 25% of total annual demand currently, which stands at 299 TWh. The latest ‘Benchmark power curve report’ suggests that electrification of the economy (involving electric vehicles and heat pumps) and the use of green hydrogen as an energy carrier will jointly increase demand. This will go from 298 TWh in 2021-22 to 628.4 TWh in the Central Scenario by 2040 and up to 668.2 TWh in the High Scenario. Tom Edwards, senior modeller at Cornwall Insight, reports: “EVs are widely seen as crucial in reducing emissions to meet net zero. However, the magnitude of the impact that the technology will have on the electricity system should not be underestimated. If EVs increase according to the National Grid’s Future Energy Scenarios (FES) ‘Leading the Way’ scenario, the increase in demand for electricity will be substantial.”

He concludes: “EVs have the potential to offer the system considerable flexible vehicle-togrid (V2G) discharging and smart charging, which reduces the level of investment needed in flexible power supply. “At the same time, greater flexibility may be needed if consumers were to charge whenever it is convenient, and with the wide deployment of EVs needed to meet net zero it is clear that this would currently not be possible.” Edwards says that electrification of transport remains a significant challenge, particularly if the current market design remains the same. It is likely that the market design will need to change to better support the net zero objectives, he explains.

NEWS Correct sizing ensures efficiency in system designin UPS installations,

STEP will generating power for the UK by the early 2040s

or UPS installations, correct sizing ensures efficiency in system design and reduces the overall total cost of ownership (TCO) for the client, size matters, explains Aaron Oddy, Sales Engineer, CENTIEL UK Ltd. To find the right size for the UPS, understanding the size of the load is necessary. UPS systems are commonly measured in power ratings of kVA or kW, depending on the load requirement. Historically, sizing in kVA was standard practice as it is understood that the apparent power is different to the actual power. For example, a 100kVA UPS designed with a power factor (pf) of 0.8 can only deliver 80kW of true power. Factoring apparent and actual is critical in making the right calculation for your system. The gap between apparent and actual power has become less over time with the latest technology of UPS systems offering a unity power factor of 1.0, meaning kVA = kW. However, it is still necessary to check to see if the actual load has a power factor to size the system correctly using the equation below. Actual Power (KW) = (Apparent Power (KVA) x UPS Power Factor) Here’s a working example comparing 0.9pf and 1.0pf: If the Unity Power Factor of a UPS is 1.0, a load with apparent power of 60KVA will be 60KW. Simple. However, if the Power Factor of the UPS is 0.9 then the true or actual power of a 60KVA UPS will be 54KW of actual power. Therefore, it’s important to understand the actual rather than apparent load to determine the size of the UPS needed. We also don’t want to oversize a UPS as this is inefficient. A UPS which is too big can cost more to buy, more to run and more to maintain, adding significantly adding to the TCO over time. With standalone or monolithic UPS, there is less flexibility on rightsizing. If a UPS is required to support a 100kW load on day one with projected load growth of up to 200kW, installing a 200kW at day oneinitially would be inefficient and unnecessary. Although the system is future proofed, it is double the size required from day one. A modular system is far more flexible and a 100kW (Unity Power Factor) UPS could be installed with the capacity to add modules using a pay as you grow approach up to full capacity. Only the infrastructure around the UPS needs to be ready for future growth, allowing for system upgrades without the need to transfer the load to bypass or a site shutdown. Rightsizing the UPS from day one reduces overall capital expenditure and minimises running and maintenance costs. It's the same with the DC components of an installation. To right-size batteries we need to understand a client’s shut down procedure. If there is a power cut, how long does it take to safely shutdown the critical load safely? Is a three-hour run-time really needed? For example, Hospitals, adhere to HTM compliance of a one-hour autonomy. However, other clients may only need, half an hour or 40 minutes. It’s all dependant on site requirements. Lead is priced on weight, so it’s possible to reduce the investment in the lead-acid batteries proportionally. This also influences the amount of space needed to house batteries and cooling to keep them at their optimum working temperature of <200C. The term efficiency also requires attention. Most marketing material will state the efficiency level of the UPS, but it’s important to look more deeply at what this means. Most UPS are incredibly efficient if run at 100% load. However, when the load demand reduces significantly so can the overall system efficiency. The pandemic is a prime example of where equipment was not being used to full capacity and a reduced load meant that some UPS systems were not operating at the best point in their efficiency curve. Particularly systems with aging technology. To mitigate this, look for a UPS that has a flat efficiency curve meaning it sill performs optimally even at lower loads. So, when it comes to UPS systems, size is definitely important. Calculate the rating of the UPS system based on the actual power of the load measured in KW; don’t oversize systems; query the necessary autonomy and ensure the UPS can remain efficient if the load tails off. Our sales engineers at CENTIEL are experienced in making these kinds of calculations to ensure UPS systems are perfectly sized to perform optimally, reducing the TCO for power protection for clients all over the world. : www.centiel.co.uk

final decision on a site for the UK’s prototype fusion energy plant – the Spherical Tokamak for Energy Production, or STEP – will be made by the minister for Business, Energy and Industrial Strategy around the end of 2022. A shortlist includes five prime sites: Ardeer, in North Ayrshire, Scotland, Goole (in the East Riding of Yorkshire), Moorside, in Cumbria, Ratcliffe-on-Soar, in Nottinghamshire, and Severn Edge in Gloucestershire. The programme reflects the aims of STEP - a government-backed initiative to build a prototype fusion energy plant in the UK. The STEP plant aims to generate net electricity as well as demonstrate how the plant will be maintained and how it will produce its own fuel. STEP will pave the way for the commercialisation of fusion and the potential development of a fleet of future energy plants around the world. The UK Atomic Energy Authority (UKAEA) is projecting that it first operations in the early 2040s. UKAEA carries out fusion energy research on behalf of the UK

and estimates that operations could commence in the early 2040s. UKAEA currently carries out fusion energy research on behalf of the UK government. In addition to its initial £222 million commitment to STEP, the government has already invested £184 million for new fusion facilities, infrastructure and apprenticeships at Culham Science Centre near Oxford and at Rotherham, South Yorkshire. The planned UK facilities would feature a ‘tokamak’ design which uses magnetic fields to confine a plasma of heavy isotopes of hydrogen, tritium and deuterium, which fuse under extreme heat and pressure. STEP would be a spherical tokamak which holds the plasma in a cored-apple shape. UKAEA’s MAST Upgrade spherical tokamak device, due to start operation in late 2020, will will be an earlyversion of the final STEP design. With a total diameter of only around 10-metres, STEP will be relatively small in comparison to ITER.

Cenergist headquarters opened by Lord Callanan

n 26th November, 2021, the Minister for Business, Energy and Corporate Responsibility, Lord Callanan, officially opened the new Leeds site of leading energy and water efficiency company, Cenergist. Cenergist helps local authorities up and down the country reduce their carbon footprint and enables them to reach their net zero goals. With Leeds hoping to become the first carbon-neutral city in the UK, Cenergist’s multi-million-pound partnership with Leeds City Council will be crucial to helping to drive forward a city-wide decarbonisation programme which will see schools, leisure centres and heritage buildings become more energy efficient. Across the wider project, Cenergist will also install a total of 61 heat pumps across 31 sites in Leeds which will save an annual total

of 3,951 tonnes of carbon city-wide – equivalent to planting over 23,000 trees. Part of Eneraqua Technologies PLC, Cenergist, is a specialist in energy and water efficiency helping Local Authorities up and down the country reduce their carbon footprint and reach their net zero goals. Lord Callanan witnessed firsthand how Cenergist is helping the UK transition towards a net zero future, reports the company.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

TOTAL CONTROL FROM EVERY PERSPECTIVE

Anyone who knows gensets, knows that Mecc Alte is unrivalled for our knowledge and expertise worldwide. From alternators to controllers, we are the Power from Within, giving you the ultimate choice of kit that you need, all backed up by the support and impartial advice you only get from the world’s leading independent alternator specialists. Take 360° control. Talk to Mecc Alte.

The world’s largest independent producer of alternators 1 – 5,000kVA

FOR FURTHER INFORMATION VISIT WWW.MECCALTE.COM

NEWS Veolia plans to create hydrogen gas supply infrastructure & decarbonise the UK energy supply

3MVA diesel generator installed at the University of Sheffield

eading resource management company, Veolia, is advancing its programme to create the hydrogen gas supply infrastructure and decarbonise the UK energy supply. Believed to be the first application of its type in the UK, the company's latest development is now managing projects which incorporate electrolyser technology to derive hydrogen from water, and powering these using the low carbon electricity from its Energy Recovery Facilities (ERF). Future use of the hydrogen could include both replacing the use of fossil fuel on the gas grid and providing alternative zero carbon fuel.. For many years, methane gas has been used to heat homes and businesses, and used in power stations to generate electricity. As a result currently 85% of homes and 40% of the UK’s electricity rely on gas. But when methane burns it still releases carbon, which contributes to climate change. Veolia's projects will accelerate progress towards climate protection and a net zero future, by replacing fossil fuels and realising the potential to decarbonise heat in industry, businesses and homes, and provide vehicle fuels. By using electrolysis, the process which uses electricity to split water into hydrogen and oxygen, it could create hydrogen that can be stored for future energy needs. This will cut carbon emissions, and is a potential future solution for decarbonisation as water is the by-product when hydrogen is used. The gas industry is testing ways to use hydrogen in the gas grid, and Veolia is already preparing sites to be able to use this hydrogen in a range of on-site energy plants such as combined heat and power units, and industrial boiler plant. Commenting on this latest zero carbon initiative, Donald Macphail, Chief Operating Officer Treatment at Veolia said: "Reducing carbon emissions and slowing environmental change is now a priority. By developing new ways of generating zero carbon hydrogen we have the potential of covering the energy needs of our modern lives, and stopping the climate damaging impact of CO2. This represents a real step forward on the route to a net-zero world. Veolia currently operates ten plants that take around 2.3 million tonnes of non-recyclable waste and transform this into electricity for over 400,000 homes. This combined generating capacity of 180MWe takes pressure off the stretched UK electrical grid and effectively avoids using fossil fuels for generation." Electrolysis is the process of using electricity to split water into hydrogen and oxygen. This reaction takes place in a unit called an electrolyzer. Electrolyzers can range in size from small, appliance-size equipment that is well-suited for small-scale distributed hydrogen production to large-scale, central production facilities that could be tied directly to renewable or other nongreenhouse-gas-emitting forms of electricity production. Like fuel cells, electrolyzers consist of an anode and a cathode separated by an electrolyte. Different electrolyzers function in different ways, mainly due to the different type of electrolyte material involved and the ionic species it conducts.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

TGen has completed a new standby power solution for the historic University of Sheffield, a Russell Group University in South Yorkshire. DTGen supplied and installed the 3 MVA at 11 KV generator in a bespoke, 65dba, container with remote cooling package, 45,000 litre bulk fuel tank and management system. The tailored installation has penthouse airways for the inlet and outlet airflow attenuators. The team also developed a ComAp HV control system using fibre optic communications to control the 27 high-voltage vacuum breakers around the existing HV network throughout the campus. This modular control package was achieved using various outstations and panels networked to control the switching, monitoring and connection of the load throughout a number of buildings during any mains power outage. Located in the new university’s energy centre built by Vital Energy, the system has been designed so that with high load demand during a prolonged outage

the 3 MVA generator can operate in parallel with the 2MW CHP unit. This provides the University with an even greater level of power resilience. With both the generator and CHP under control of the ComAp system, the facility is also capable of seamless transfer back to the utility incomer supply with G-99 protection. The system is also designed to ensure that the generator can be tested on the energy centre load with automatic front and back synchronisation and network configuration ensuring minimum disruption to the university power network. Kenny Berrie, Head of Technical at DTGen, said: “We’ve been delivering robust backup power solutions to universities and educational facilities throughout the UK for more than 50 years. Our power solutions team is technically expert, dealing with a wide range of installations in many historic sites.”

Kohler supplies thirteen 1650KVA gensets for UK data centre

Thirteen 1,650 kVA diesel generators (T1650) will be delivered to shortly to a data centre client, says KOHLER. The G3 performance class sets have been tested at Hodgson Acoustics Company Ltd before delivery and installation. The G3 - T1650 1650kVA Kohler generating set (50Hz) is equipped

with a Mitsubishi engine ((S12RF1PTAW2) 400/230V. The gensets offer a number of interesting features including an electronic governor, a mechanically welded chassis with anti-vibration suspension, a radiator for core temperature of 48/50°C max with mechanical fan, a protective grille for the fan and rotating parts (CE option), an exhaust compensators with flanges and a 24 V charge alternator and starter. KOHLER® diesel generators are built to power data centres of all sizes in every location around the world, reports the company. With its new line of KD Series generators, the company can offer iits clients many power options up to 4 MW. 7

NEWS Centrica is taking a minority stake in HiiROC

BituChem, a road surfacing specialist based in Gloucestershire, buys QIS 335 genset

entrica has announced it is taking a minority stake in HiiROC, the hydrogen production technology company which helping to combat climate change with affordable hydrogen produced at scale but without CO2 emissions. HiiROC has completed a £26 million funding raise with new investors including Melrose Industries, HydrogenOne, Centrica, Hyundai, and Kia, who join existing strategic investors Wintershall Dea and VNG. HiiROC’s proprietary technology converts biomethane, flare gas or natural gas into clean hydrogen and carbon black, through an innovative electrolysis process using thermal plasma. This results in zero CO2 “turquoise hydrogen” at a comparable cost to steam methane reforming but without the emissions and using only one fifth of the energy required by water electrolysis. "Our technology will produce low-cost, zero emission hydrogen, delivered to customers on a modular, scalable basis at the point of demand." Tim Davies, HiiROC Chief Executive Officer The solid carbon byproduct, carbon black, has applications ranging from tyres, building materials and as a soil enhancer. Its production using HiiROC’s technology avoids the emissions and pollution inherent in the predominant oil furnace manufacturing process. The HiiROC technology can be placed where hydrogen is needed, thereby using existing infrastructure and avoiding storage and transport costs. HiiROC has strong growth potential right across the hydrogen economy from grid injection and electricity generation to decarbonising industry by replacing natural gas, flare mitigation and synthetic fuels. Initial projects include a 400kg/day hydrogen facility recently announced by Wintershall Dea and VNG, as well as at EPi’s biomethane pilot plant in Chelmsford, and with Northern Gas Networks as part of its hydrogen programme. This round of funding will expand the deployment of pilot units into more customer segments, positioning the technology for future roll-out. The modular units have practical applications from small scale, such as transport and heating, through to large plants decarbonising gas-fired power stations and for hydrogen blending in the grid. "There remains a great deal of work to be done to make hydrogen affordable, sustainable and available at scale, but HiiROC’s technology demonstrates that this can be achieved sooner rather than later," commented Greg McKenna, Managing Director of Centrica Business Solutions Furthermore, the funding will accelerate HiiROC’s technical development, broadening its application into areas such as low carbon synthetic fuels and mitigating gas flaring/venting to help meet global methane emission reduction goals announced at COP26. Tim Davies, HiiROC’s CEO reports: “We are delighted to have completed this major funding for the business at this extremely exciting stage in our development. Our technology will produce low-cost, zero emission hydrogen, delivered to customers on a modular, scalable basis at the point of demand. “We are now very well positioned to move to commercialisation and are excited to have Centrica as a partner, bringing the breadth and depth of expertise required to operationalise our transformative technology.” Greg McKenna, Managing Director of Centrica Business Solutions, said: “We see a huge role for hydrogen across Centrica, from domestic boilers in people’s kitchens to Combined Heat and Power units powering data centres and hospitals. “There remains a great deal of work to be done to make hydrogen affordable, sustainable and available at scale, but HiiROC’s technology demonstrates that this can be achieved sooner rather than later. “We think that there is certainly scope to grow our partnership significantly over the coming years.” 8

ital Power is one of the fastest growing generator service solutions companies in the UK. UK genset. It was able to assist a client called BituChem, a road surfacing specialist based in Gloucestershire, faced with the tricky issue of selecting a new genset. BituChem had been previously reliant on power supplied from a generator to run plant onsite. This was a 25-yearold, 300kVA generator which, whilst still running, had started to show serious signs of old age. BituChem decided to look into replacing the generator for more reliable power on site, future proofing their operations at the same time. HFT Forklifts, a leading supplier of material handling and storage products, were a long term supplier to site and were asked to source a new generator for site. BituChem was keen to source a new generator which offered increased fuel efficiency, more reliable power delivery and provided a long term solution to powering the plant on site. Issues such as motor starts & low loading were key factors which BituChem wanted to

consider, so choosing the right generator at the correct power node was a crucial element in this upgrade project. Following a period of load monitoring on site, and taking into account the various motor starts involved duringplant start up, it was determined that a QIS 335 (300kVA prime/330 kVA standby) was the appropriate generator for the task. Vital Power supplied, electrically-installed & commissioned an Atlas Copco QIS 335 onsite to ensure reliable power can be supplied for the foreseeable future. The QIS 335 comes complete with a robust VolvoTAD1341GE engine, Mecc Alte alternator & DSE 7320 control panel. This genset was also specified with a long-run fuel tank to allow more time between fuel fills. BituChem is now on a tailored 5year service & maintenance plan, complete with 24/7/365 callout facility to further protect the site moving forward.

Bells Power installs 400KVA genset at a site near Marble Arch, London Bells Power reports the successful installation of an FG Wilson P400-3 genset within a sound-attenuated canopy delivered to the roof level of a new project located by Marble Arch in the heart of London. The genset uses a Perkins® 2206AE13TAG2 Engine Model, p Part of our 2000 Series, the 6 cylinder Perkins 2200 range diesel engine is ideal for your power generation requirements

from 350-500 kVA, whether prime or standby power. Among the features and benefits of the 2000 Series are flexible packaging to cater for the space available, mechanically-operated unit fuel injectors, electronic control and carefully matched turbocharging technology. These are all features of the Perkins 2200 range.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

NEWS Wilson Power Solutions supplies the Contego mega-project at Burgess Hill

Advanced fuel cells & H2 genset applications in County Durham

n September 2021 Wilson Power Solutions supplied 14 x 2.8MVA transformers to the 34 MW / 68 MWh Contego project near Burgess Hill in West Sussex. The project was developed by Harmony Energy and Fotowatio Renewable Ventures (FRV). The site uses a battery storage system of 28 Tesla Megapack lithium-ion batteries with Tesla’s Autobidder AI software for real-time trading and control. This project is connected to the UK Power Network’s (UKPN) distribution network, providing the capability to store energy from renewable sources to be used during peak hours. This also increases the flexibility of the UK National Grid, while playing a part in the country’s attempt to move away from fossil fuels. This ground-breaking technology will also help prevent price spikes. On Monday 6th September 2021 energy prices reached a record high as wind output fell sharply and as a result coal and gas stations were paid thousands of pounds to switch on at short notice. Battery energy storage would have been able to fulfil the needs of the energy companies at a much lower cost while also being more environmentally-friendly. All 14 Transformers that have been supplied to the Contego site are 2800kVA Wilson e1 transformers, constructed out of aluminium and filled with oil. The Transformers are also hermetically sealed which means no air, moisture, dust, etc. can enter the tank which will dramatically reduce maintenance costs. A spokesman commented: " Wilson Power Solutions is proud to support this revolutionary battery energy storage project, taking a huge step towards the UK National Grid’s goal to decarbonize Britain’s energy grid.Every battery storage project we have worked on in the past had had unique requirements. We service these projects through our special transformers with bespoke design and build customised to the site needs and specifications." In September 2021 the company was awarded the “Innovative Energy Project of the Year” for the Western Europe Region for its Ultra-Low Loss Transformers at the AEE Awards 2021. The Association of Energy Engineers (AEE), was founded in 1977 by Albert Thumann and is a nonprofit professional society of over 18,000 members in more than 100 countries. The mission of AEE is “to promote the scientific and educational interests of those engaged in the energy industry and to foster action for Sustainable Development.” This award recognises an innovative energy project (includes renewable and green ventures, and those making a significant impact on climate change) that has been in operation for at least 6 months and can be authenticated with the actual installation, operating costs and achievements. Transformers are designed to operate for 30 years, but in many cases, they are kept in operation for more than 50 years. In the UK, the average age of a ground-mounted distribution transformer is 63 years (FOI Ofgem). According to Wilson Power, transformers are all too-often ignored and completely overlooked as an energy-saving opportunity despite older models being vast consumers of energy. Wilson Power Solutions says it ‘prides itself on being ahead of the curve’ and in providing innovative and sustainable energy solutions. In 2008, it became the first transformer manufacturer in the UK to address energy waste through distribution transformer losses. Seven years after this the EU commission regulated transformer losses (Tier 1, 2015). We were also the first company in the UK to introduce Super and Ultra Low Loss Transformers made of an amorphous metal core. 10

he development of the hydrogen-fuelled internal combustion engine (H2-ICE) involving a medium-duty 6.7 L and a heavy-duty 15 L platform has begun, comments Cummins Inc. Part of the development work at Cummins Darlington facility in the north-east will be supported by approximately $10 million supplied by the UK government, and provided under the aegis of the Advanced Propulsion Centre (APC). Based on next-generation platforms, the goal for the hydrogen engines is to achieve zero carbon emissions, and enhanced power density and improved thermal efficiency. Comments Srikanth Padmanabhan, president, Engine Business, Cummins Inc.: “We’ve established significant goals as part of our Planet 2050 sustainability strategy, including a target of zero emissions “Reducing well-to-wheels carbon emissions requires innovation of both energy sources and power solutions. “While use cases for battery electric and fuel cell electric powertrains are

promising, the pairing of green hydrogen in the proven technology of internal combustion engines, provides an important complement to future zero emissions solutions.” He explains: “Cummins’ leadership and deep knowledge in gaseous-fuelled technologies will enable us to develop these new hydrogen-fuelled internal combustion engines for medium and heavy-duty markets. “We are ready to accelerate the pace of our H2-ICE program to ensure Cummins continues to be a leader in this new, exciting technology.” Cummins said that using existing engine platforms for the H2-ICE program also means that it will be able to use its existing engine production facilities and service support network reducing costs and improving efficiency. In addition. the company can also reduce equipment redevelopment timelines, as many existing driveline components can be retained.”

A 60kva genset provided to Kier Regional Civils for long-term hire

ier Regional Civils required a sustainable, cost-effective, and suitable power solution for their compound in Whaley Bridge. Wernick Poawer Solutions was able to supply a 60kva Generator with a 3000-litre fuel tank for longterm hire contract. The existing onsite generator, sourced from an external supplier, had been running at lower than its optimum capacity which was causing breakdown issues.The generator was using more fuel and oil which meant that costs and emissions increased. The client was supplied with a 60kva generator, 3000L fuel tank and a 125Amp mains distribution unit (MDU) which is designed to facilitate the connection of the generator’s output to the client’s equipment or premises.

Thanks to Wernick Power Solutions products - specifically thanks to its generator - the client was able to save over 500-litres of fuel a week, reducing both costs and the carbon footprint via the reduction of emissions. The generator was equipped with the Power Solutions’ telemetry service, a GPRS tracking and monitoring system which enables the monitoring of fuel, oil, and water levels. The telemetry service provided also offers increased security.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

Manage your power from anywhere

SPECIAL OFFER! Alarms, dashboards, reports etc. included

£599 + VAT!

Up and running within minutes No IT skills required

DATA SECURE

Trouble shooting as if you are on-site 24/7/365 Industrial design for rugged applications

Find out more 01926 405599 uk-sales@hms-networks.com

A vendor independent solution www.netbiter.com

NEWS NIdec's key alternator development: lSA 47.3 industrial alternator with increased performance & optimised cooling system

£3m upgrade for backup power system at a bank data centre

irst released in mid-2021, the LSA 47.3 alternator features increased efficiency and starting kVA over its predecessor, and also benefits from the implementation of the lastest technologies developed by Nidec Leroy-Somer. "The LSA 47.3 is an important step forward in our strategy to optimize our product range" said Wenbin Ding, low voltage range product manager. "The benefits of this new product are significant, with real improvements where it matters most: efficiency, power and starting kVA. In addition, the optimized cooling system we implemented means that hot spots are reduced inside the machine. Ultimately this means a better reliability and longer lifetime, which is essential for the applications all LSA alternators are built to support,” he says. The LSA 47.3 delivers a rated power between 410 and 660 kVA at 50 Hz (495 to 825 kVA at 60 Hz). The 660 kVA rating (825 kVA at 60 Hz) was previously held by the LSA 49.3. Thanks to the cooling circuit optimization, the LSA 47.3 is now able to reach this power node for prime and demanding application. This is a significant benefit for generator set manufacturers as the same power is made available through a more compact machine. The LSA 47.3 alternator features a SHUNT excitation system with a R250 regulator as standard. An AREP auxiliary winding excitation system with D350 digital regulator version is also available to improve transient performances and provide high overload capacities. A D550 digital regulator can also be used for grid connected applications. A Permanent Magnet Generator (PMG) excitation system is also available as an option. The LSA 47.3 is fully interchangeable with the LSA 47.2 (shaft height and feet configuration), and can therefore be coupled with all diesel engines on the market for this power range. It is now available for orders. The LSA 47.3 offers the following power nodes: 410, 455, 500, 550, 600, 660 kVA at 50Hz & 510, 570, 625, 690, 750, 825 kVA at 60Hz. This alternator is optimised for prime and demanding applications such as marine and cogeneration. It offers an efficiency of up to 95.7% at cos φ 0.8, which ranks it among the best in the category. With the LSA 47.3 introduction, the LSA 47.2 will soon be retired from the market, as well as the LSA 49.3 S4 (660 kVA), reports the company. The LSAH 42.3 is being released to complement the LSAH 44.3 released the previous year. It uses the same heat recovery system, andfeatures leading electrical and thermal efficiency values. The LSAH 42.3 has been designed to be packaged into small natural gas generator sets built for combined production of heat and electricity. The main application of these gensets are residential and public buildings central heating. The LSAH 42.3 delivers a rated power between 10 and 33 kVA at 50 Hz in continuous service (from 12.5 to 41 kVA at 60 Hz). The alternator is fitted as standard with an AREP excitation system and a D350 regulator. Paralleling with the public network for the resale of electricity production surplus is also possible with a D550 AVR. Thanks to its cooling and heat recovery system, the LSAH 42.3 offers premium performance, especially in situations involving intensive use.

ale Power Solutions was involved in a £3m upgrade for backup power system at UK bank’s data centre. The company reports that a banking client had a 6-generator system providing backup power to a data centre. Each system provided 1 MW, 1250 kVA. The system had become outdated and parts had become obsolete which prevented necessary repairs and servicing from being carried out to keep the system current and reliable. Dale Power Solutions began with a rigorous survey, and the development of a 5-year programme to upgrade the full backup power provision. Some of the generators were replaced with modern components and made fit for purpose. Replacement of obsolete components, on otherwise good generators, was a cost-effective solution to extend the life of parts of the backup power systems. The refurbished generators received new open protocol systems, providing

modern functionality with accessible monitoring and control systems. The technical team from Dale Power Solutions also updated the exhaust, cooling and acoustic systems at the data centre. Fuel systems were upgraded with bunded pipework and new fuel day tanks were provided to comply with environmental legislation and mitigate the risk of fuel leakage. In another important genset contract, Dale Power Solutions was asked to provide diesel generators for an offshore gas platform. The generators has to be situated in a Zone 2 environment where explosive gases could occur. Dale provided a 200 kW generator and another emergency 200 kW genset Each element was designed to manage the overall finished weight and not exceed the offshore crane’s limitations, reports the company. Materials were integrated to extend the life of the equipment, reports Dale, and all components were fully bunded.

National Grid is ‘confident’ lights will stay on this winter 2021 National Grid says it expects gas and electricity supplies will meet the country’s needs over the looming winter but prices indicate there is a steep price rise on the way. The gap between electricity supply and demand is expected to be narrower this winter than last as the country battles an energy crunch but there should be no disruption from the lights or gas flames going out, according to key industry reports. System operator National Grid released eagerly awaited forecasts covering both gas and electricity supplies – with both expressing confidence that supply would meet demand over the cold months ahead. Its expectations come as raw energy prices shift across Europe and UK, with gas costs hitting record levels.

The National Grid’s annual winter outlook, which assesses its readiness to keep the lights on, forecast an electricity margin of 6.6% capacity, lower than last winter’s 8.3%. That means it expects to have 6.6% of supply left over at peak times on average.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

LOADBANKS for GENERATORS

THE TRUSTED NAME FOR LOAD TESTING

LOADBANK PACKAGES ■ ■ ■ ■

20kW to 7000kW Resistive Only Loadbanks Resistive / Reactive Loadbanks DC Loadbanks

SALES | SERVICE | RENTAL

Call today: +44(0) 1283 531 645

Crestchic Limited, Second Avenue, Centrum 100, Burton upon Trent, Staffordshire DE14 2WF, UK T: +44 (0)1283 531645 F: +44 (0)1283 510103 E: sales@crestchic.co.uk

www.crestchicloadbanks.com Sales & Rental Offices in : UK, North America, Singapore, Germany, Brazil, Netherlands, France, China and UAE

NEWS RWE is ready to support the UK’s Hydrogen strategy

Teksan's contribution to the world's most powerful tidal turbine

WE, one of the leading companies in renewables and one of the key players in setting up the hydrogen economy, has welcomed the publication of the UK Hydrogen Strategy. This strategy and launch of consultations is ‘a huge step forward’, says the company, and RWE encourages the Government to set even more ambitious targets to facilitate the UK’s hydrogen economy. The company is thoroughly analysing the proposals and will be responding to the accompanying consultations in due course. Hydrogen will be key to the decarbonisation pathway and as a partner to industry, RWE is part of that solution. As a UK leader in power generation, RWE is perfectly positioned to support the development of the UK hydrogen economy. Thanks to its large renewable power portfolio, the company can supply a considerable amount of zero-carbon energy to produce green hydrogen. Furthermore, the company’s own gas-fired power stations are a potential offtaker for hydrogen, while RWE can provide expertise in gas storage facilities and supply to industrial customers. Tom Glover, RWE UK Country Chair, said: “RWE is a driver of the energy transition, about 90 percent of our capital investment is in green technology including renewables and storage. We know that hydrogen will be key to cracking zero carbon emissions across industrial processes, and RWE is committed to playing a full part in the delivery of this emerging technology and at the same time creating skilled green jobs.” RWE is at the forefront of green innovation having played a significant role in shaping the UK offshore wind industry building the country’s first offshore wind farm (Blyth demonstrator, 2002); and the first commercial scale offshore wind farm (North Hoyle 2004). A dedicated team at RWE of around 250 people is working on developing hydrogen projects, contributing to the UK and EU hydrogen ambitions. Together with prominent partners from industry and the scientific community, RWE is forging ahead with the development of 30 hydrogen projects along the entire value chain. In the UK, RWE has partnered with industry to move towards the use of hydrogen in industrial processes in the South Wales Industrial Cluster (SWIC). Through RWE’s Pembroke Net Zero Centre (PNZC) initiative, the company is investigating the feasibility of green hydrogen production located at the Pembroke Power Station site, in addition to the potential for consuming hydrogen in the power station. In the longer term, there is also the opportunity to produce gigawatts of green hydrogen connected to offshore floating wind in the Celtic Sea. The UK plays a key role in RWE’s strategy to grow its renewables portfolio and to become climate neutral by 2040. The company is currently constructing the 857 MW offshore wind farm Triton Knoll (RWE’s pro-rata share: 506 MW) off the Lincolnshire coast which is expected to be fully commissioned in the first quarter of 2022. RWE is also building the 1.4 gigawatts Sofia offshore wind project on Dogger Bank. This will enlarge RWE’s UK portfolio of nine offshore wind farms. RWE is also progressing four extension projects in the UK, with a combined potential installed capacity of around 2.6 gigawatts. The company recently bid for two new adjacent offshore sites – also on Dogger Bank. 14

rbital is on a mission to help turn the tide on climate change by commercialising its unique technology designed to capture renewable energy from the power of the sea’s tidal streams. O2, the world’s most powerful tidal turbine, is now generating power at the European Marine Energy Centre (EMEC) in Orkney - with a backup genset provided by Teksan. The 680-tonne, 74m long O2 is Orbital’s first commercial demonstrator. Expected to operate in the waters off Orkney for the next 15 years, the O2 has the capacity to meet the annual electricity demand of around 2,000 UK homes with clean, predictable power from the fastflowing waters. Electricity is transferred from the turbine via a dynamic cable to the seabed and a static cable along the seabed to the local onshore electricity network. A Teksan generator has been specifically developed for the sea conditions involved with the project. The genset has been involved with off-grid testing and commissioning tasks, and makes an important contribution to one of the best examples of renewable energy generation. Teksan, a key manufacturer in the energy solutions sector, is advancing rapidly in its global brand journey, with over 25-years of experience. Today, the company produces project-specific designs, provides engineering power, teams of experts and effective after-sales services. Continuing its production and sales operations in numerous parts of the world, Teksan exports its solutions to more than 130 countries across six continents. Products with a Teksan signature are being used in important sites in many parts of the world, from Greenland to New Zealand. Having reinforced its market position through its offices in the UK, Teksan predicts it will soon occupy a significant place in the country’s generator sector as well. Diesel, natural gas, and biogas generator sets; cogeneration and tri-

sets, cogeneration & trigeneration systems which provide 90% energy efficiency are provided by Teksan. The company also produces hybrid power systems, biogas solutions and mobile lighting towers. Today, Teksan provides services to many sectors such as healthcare, finance, construction and infrastructure, telecommunications, data centres, as well as to food and agriculture facilities. Teksan has developed its own hybrid generators at a dedicated R&D Centre. It has deployed renewable energy solutions which are being used successfully in many important projects, in locations ranging from South America to Africa, from Saudi Arabia to oil platforms in the North Sea. Having accelerated its studies in the field of energy efficiency, Teksan is adding new ones to its portfolio. The renewable energy project being implemented by Teksan for the innovative Scottish engineering company Orbital Marine Power on the coast of Scotland - is being undertaken jointly with its Scottish dealer Wallace Power. Teksan and Wallace Power have more than 25-years’ experience together in this sector and have co-operated on many important projects during their long collaboration.

NOVEMBER-DECEMBER 2021 UK POwER NEwS

FIND OUT HOW JENBAC HER ENGINES CAN SUPPORT YOU R BUSINESS!

GENSETS

Temporary power package at an art deco building in London Powerhire won a contract to provide a temporary power package for a classic art deco building located in the Shoreditch area of East London. The company supplied two 200-kVA generators for a mixed-use site whilst a permanent standby solution was being decided on by the clients.

long-standing customer of its sister firm, The Generator Company, Powerhire received an enquiry about temporary power for a project they were working on in London. Temporary power was required to support a mixed -use building whilst a permanent standby power solution was sought. Powerhire's technical sales manager arranged a site visit to discuss the power needs and any site restrictions for the building. The award-winning art-deco-style masterpiece ilocated n a trendy Shoreditch area of London, the structure was completed seven years ago for mixed-use purposes. The site contained 276 residential spaces comprising a residents-only spa and cinema, a public square and employment space. The 38,000m2 design retained the original restored 1933 art deco building with a further 26 floors added tp pr ovide what observers called ‘a strikingly-elegant addition to the London skyline. After Powerhire’s team had met with the client and inspected the site it was determined that all the temporary equipment

would need to be housed in the underground car park for the duration of the project which would mean transporting all the equipment via the car lift down into the basement. This immediately established som e challenges the installers would need to overcome. Whilst onsite Powerhire’s technical sales manager confirmed the weight limit and the door size of the lift to ensure that transporting equipment using this approach was feasible before discussing the project with the operations team. A company spokesman comments: “With the equipment positioned in the basement, we had to consider the dispersion of the diesel fumes from the generators into the outside world. “We contacted one of our local suppliers who offered an extraction kit for the control of diesel fumes in buildings and other sensitive areas comprising a very powerful centrifugal fan which was just what was needed.” Taking into account the size and weight restrictions of the car lift and the extraction of the fumes a proposal was submitted to the customer offering 2 x 200kVA temporary

“The award winning artdeco-style masterpiece in the trendy Shoreditch area of London, was completed in 2015 for mixed use purposes and contained around 276 residential spaces comprising a resident’s only spa and cinema, a publ ic square and employment space.”

generators to run in sync, providing a total of 400kVA, to support the life safety system within the building including fire alarms, elevators and sprinkler systems in the event of a power failure. As a result of the building currently not having any backup power in place, an Automatic Transfer Switch (ATS) together with a 100-metre cable run was included to monitor the incomi ng voltage. When utility power is interrupted, the ATS immediately senses the problem and signals the generators to start. Stage one of the project began with all equipment being delivered using Powerhire’s own Hiab lorry. Traffic was temporarily halted to allow for the offload at street level. The generator canopies were modified prior to delivery by removing the centre lifting ring on the top of the cano py due to height restrictions of the car lift. The equipment was offloaded and with only a 4mm gap at the top to play with, Powerhire’s engineers manoeuvred the generators into the lift and down into the basement car park where they were skated into empty car parking bays ready for stage two connections. The engineers returned to site to connect the 2 x 200kVA generators to the clients Switchboard via a 40 0Amp Auto Mains Failure (AMF) panel. The car park was in constant use by the building’s residents so the main power and control cables were installed onto a cable tray suspended from the carpark roof. This was followed by fitting an exhaust extraction system to control diesel fumes from both generators. The equipment was designed to carry the exhaust gases out of the car park into the open in the event of the generators being activated. Powered directly from the generators, the extraction system was designed to come online as soon as the generators begin to run. All equipment was scheduled to remain on the site whilst a permanent standby power solution was being sought by the customer. The two 200kVA temporary generators supplied by Powerhire were capacble of running fully-synchronised, generating a total of 400kVA. This was enough power to easily maintain all the life safety systems within the building, such as the elevators, sprinkler systems and fire alarms, should a power failure occur in the immediate area. powerhire.uk.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

TRUSTED KNOWLEDGE. TAILORED SOLUTIONS. If you have concerns about fuel quality, speak to an experienced IPU fuel expert about our industry-leading fuel and environmental managed services. We can offer everything you need to keep your fuel in peak condition from environmental compliance through OFTEC surveys to subsequent remedial recommendations, installation of polishing systems and scheduled maintenance routines. And, as a leading OEM in fuel systems, we are in a unique position to design and manufacture the solution most tailored to your needs.

With decades of experience in the global Oil and Gas sector, operating in some of the world’s most demanding ATEX environments, we fully understand the hazards and challenges you may face – which is why you can rely on our pro-active and undiluted support at all times.

Crucial Expertise for Critical Applications.

OFTEC INSPECTIONS

REMEDIAL WORK

FUEL FILTRATION AND CONDITIONING

More details at www.ipu.co.uk IPU Group, Cygnus Way, West Bromwich, West Midlands, B70 0XB. Telephone +44 (0)121 511 0400

MEMBER

GENSETS

Installing new gensets for London’s Police Authority Powertecnique successfully secured the tender for the replacement Generator & UPS system packages at a regional London Police Station. After a year-long consultation period between the police authority and their approved external M&E advisors the existing generator set was deemed to be beyond economical repair and undersized, reports Powertecnique, one of the UK’s top power providers.

owertecnique reports a recent success in securing an important contract for the replacement Generator & UPS system packages which were based at a regional London Police Station. After a year-long consultation period between the police authority and their approved external M&E advisors the existing generator set was deemed to be beyond economical repair and undersized. The replacement generator set need ed to be sized 70% larger than the original, however due to space constraints it had to fit within the same footprint within an existing building. As part of the requirement the new generator package also had to be supplied with an improved noise attenuation because of the proximity of residential properties; it was also needed to power a water-mist fire suppression system. Installers also had to supply a re placement exhaust flue rising

through the building as the old one had been found to leak during pressure testing. Powertecnique was tasked with supplying and installing new fuel pipework to connect the replacement generator set to the existing remote fuelling system. In addition to the above, the two existing 40,000 litre bulk fuel tanks required refurbishment which involved a full internal clean of the tanks, fuel polishing and then certified disposal of contamination and fuel sludge. One existing UPS system was relocated without any interruption to supply, and another uninterruptible power supply which had been serving the station’s Comms Room, was replaced with a new 125kVA modular UPS system to allow for redundancy. This new UPS systems was fitted with a bespoke narrow battery rack to fit into the avai lable walkway whilst allowing sufficient space for future UPS maintenance.

“The entire project, providing new generator sets and UPS systems for the pol ice authorities, was achieved in l ine with the cl ient’s programme. This project was completed within 6-months of order receipt.”

The entire project, providing new generator sets and UPS systems for the police authorities, was achieved in accordance with the client’s stipulated programme. This project was completed within sixmonths of order receipt which included a break in site activities over the festive period. The new generator set was longer than the o ld one due to the increased power rating, along with the radiator being set-mounted. Accordingly, to fit the new system into the available space required close co-ordination between Powertecnique, the ventilation subcontractors, the client’s project team, and the switchgear manufacturer. Additional problems were posed by the low ceiling in one half of the plantroom and increased air flow, which necessit ated the use of forced ventilation to provide air for cooling and combustion to the back end of the generator. The police station also remained fully operational 24/7 during these works, which required Powertecnique to work closely with the end user to ensure their essential services were not disrupted. Powertecnique has been providing maintenance and services for emergency power solutions including IPS (Is olated Power Supply), UPS (Uninterruptible Power Supply) and diesel generators for over 29 years. It has its own nationwide team of fullytrained engineers available to provide immediate assistance 24/7. Powertecnique is trusted by leading businesses across the UK and works across all sectors including the NHS, education, public sector, retail, IT, telecoms, industrial and data centres, reports the compan y. Powertecnique was awarded a fully comprehensive maintenance contract to support numerous UPS (Uninterruptible Power Supply) & IPS (Isolated Power Supply) systems located at NHS trusts across South Wales. These NHS trusts and Hospitals require a constant supply of clean power to support lifesaving machines without any disruptions. A company spokesman commented: “With extensive experience supporting NHS Trusts around the country, Powertecnique has established a reputation of a trusted critical back up and service provider. Our industryleading service and maintenance plans along with nationwide coverage provide reassurance that critical UPS and IPS equipment is always operational.” www.powertecnique.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

Noise control experts

Keeping your world clean, quiet, and safe. Dürr Universal is a global leader in the design and manufacture of inlet and exhaust systems for gas turbines and reciprocating engines in the OEM and retrofit markets. www.durr-universal.com Dürr Limited United Kingdom

Phone +44 1455 8944 88 Email solutions@universalaet.com

GENSETS

Southwest hospital gets new genset package with fuel tanks The WB Power team installed two 1650kVA Kohler generating sets onsite at a hospital in Cornwall in November 2021. Four fuel tanks were installed as part of an intricate fuel management solution, involving 121,600 litres of fuel. The generating setshad to be installed in an existing plant room with limited space, reports UKPN.

ust last month the WB Power team installed 2 x 1650kVA Kohler generating sets onsite at a hospital in Cornwall. Altogether, four fuel tanks were installed as part of a key fuel management solution, in volving the storage of 121,600 litres of fuel. The generating sets were installed in an existing plant room with limited space. With the generating sets the technical team also put in accompanying ancill ary equipment such as a fuel management solution, plant room attenuation equipment, exhaust systems and then carried out full commissioning and testing. The initial stage of the project involved the removal and ‘disposal’ of the sites previous generating set, and its accompanying ancillary equipment. The equipment which had to be taken out included two generating sets, an LV Switchboard, fuel tanks, sound a ttenuation equipment and an exhaust

silencer and flue. Fortunately, thanks to WB Power’s operations in the used generator market, a buyback price for each of the generating sets which were removed was included in the project quote, with the agreed price being deducted from the total project cost. WB Power also provided a price to clean and de-gas the existing bulk fuel tanks prior to removal, ensuring they would be in working order if used in the future. The new generating sets were carefully selected by the WB Power estimating team following a detailed analysis of the hospital’s requirements. WB Power was able to strike a careful balance involving fuel efficiency, upfront costs and ongoing service requirements. Following a detailed analysis of the hospitals power requirements, WB Power proposed the install ation of 2 x 1650kVA Kohler, three phase, prime rated generating sets.

“WB Power Services was approached by a third party building services contractor to scope, design, install and commission a critical power solution for a large hospital in the South West of England. The gensets are designed to provides essential backup power.”

The 50 Hz T2200 Kohler G3 performance class genset (400/230 volts) features a S16R-Y1PTAA2-3B Mitsubishi engine and a Standby Rating of 2200 and a Prime Rating of 2050. The sets use the ComAp IGNTC-BB synchronising control panel (known as the InteliGen NTC BaseBox), a genset controller for both single and multiple gensets operating in s tandby or paralleling modes. This is a complete integrated genset solution and signal sharing via CAN bus offering many communication options Ethernet connection (RJ45), USB 2.0 slave interface, 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface and isolated secondary RS485. The sets were installed with ad ditional bespoke work, which included an automatic lubricating oil replenishment system, a fusible link released fire valve, an enclosed spring anti-vibration mountings and Optima red top (AMG) batteries (duty/standby). The generating sets were configured to be fed fuel from two 3,200-litre bunded day tanks, which were installed within a durasteel enclosure. These tanks would act as an immediate fuel sourc e and were installed below the air inlet attenuators, within a concrete wall, offering additional support and protection. The day tanks were fed fuel by two 56,000 litre bunded bulk fuel storage tanks, which came complete with: -Tank mounted duty/standby fuel transfer pumps -Tank mounted fuel polishing system -Duplex fuel strainers and differential pressure indicators -C2020 Contents gauge -Balance connect ions and valves These tanks were installed with a tank access ladder with a platform between, ensuring engineers could easily access to the manways and level switches. The generating set was installed with both inlet and outlet attenuators, which were designed to achieve a sound level of 72dBA @1m per set. The attenuators were finished in enhanced paint and were supplied with weather louvres and motorised i nlet/gravity outlet louvres. WB Power provided a twin-wall exhaust flue for each new generating set. The flues were designed and installed to exit the room adjacent to the discharge attenuators. They then rose up a mast to a height of 15m. Due to incoming emergency aircraft on the hospital grounds, the flue included three aircraft warning lights and lightning protection. www.wbpsltd.co.uk

NOVEMBER-DECEMBER 2021 UK POwER NEwS

GENSETS

Double output thanks to new containerised cogeneration The Regenerative Energies department of Gebrüder Nooren GbR has purchased eight containerized MWM biogas cogeneration power plants, doubling the installed electrical output of its existing biogas plants. The site has a lot to teach UK users of similar biogas systems, reports UKPN.

ebrüder Nooren GbR is a mediumsized agricultural business in Germany's federal state of SaxonyAnhalt. Apart from crop farming and animal husbandry, the company's business fields also include the production of biogas. Biogas plants are run to utilise animal waste in a climate-friendly way. from late 2018 to April 2020, eight locations were furnished with containerized MWM cogeneration power plants. "Up grading our cogeneration power plant locations with MWM TCG 3016 V12 and V16 containers was quite a huge project. Within about two years, we more than doubled our installed electrical output from 5.2 MW to 10.8 MW," comments Tobias Jäsch, Project Manager Biogas at Nooren Bioenergie Verwaltungs GmbH, the professional responsible for the rollout and co-ordination of the extension. The new MWM TCG 3016 genset s in the ready-to-use containerised cogeneration power plants are to facilitate the buffering of

peak loads by flex operation. The existing cogeneration power plants, most of which are powered by MWM engines of the last generation, serve the generation of the base load. "In view of the good experiences we had gained with MWM engines, we did not hesitate to decide in favour of the MWM TCG 3016 gensets with t heir high availability." Reports Tobias Jäsch: "As with every entirely new system, a number of minor glitches were encountered at the first location, but were resolved speedily. “Starting from the second location and engine, everything worked out smoothly, and this has not changed so far. To date, we have not experienced any serious outages or malfunctions of any of the new containerised cogeneration power plants, and we are still impressed by the reliability and high availability of the TCG 3016 gensets." Following an in-depth examination, the Nooren Group opted for the MWM biogas containers. The advantage of these systems is that all

“Upgrading our cogeneration power plant locations with MWM TCG 3016 V12 and V16 containers was quite a huge project. Within about two years, we more than doubled our installed electrical output from 5.2 MW to 10.8 MW.” - Tobias Jäsch, Project Manager.

components are fine-tuned to the requirements of biogas operation. Besides the standard MWM container with its genset, peripherals, and control panel, the package includes a s pecial gas treatment system. "For us, the solution with the MWM biogas containers was the most efficient way to double the output of our existing cogeneration power plants and equip them for flex operation," explains Jäsch. Mega Project: eight biogas plants expanded in less than two years The power produced from biogas at the eight locations is fed into the public grid. The heat from the power production is used onsite, e.g. to heat the pigsties, production buildings, offices, and recycling facilities. The substrate required for the production of biogas consists of liquid manure, corn, and other energy plants, most of which are supplied by the company's own operations. Specifications Company name: Nooren Bioenergie Verwaltungs GmbH Contacts: Dr. Matthias Mönch-Tegeder, Tobias Jäsch Location: 06647 Finn eland, Saubach district Cogeneration Power Plant Specifications Go-live: 2019-2020 Engine type: MWM TCG 3016 V12 and V16 Control: TPEM Gas type: Biogas Substrate: Liquid manure and corn Thermal output (total): 5.4 kW Electrical output (total): 5.4 kW Thermal efficiency: 41.8 – 42.1% (depending on the location and machine type) Electrical efficiency: 42.0 – 42.4% (depending on the location and machine type) Tot al efficiency: 84.1 – 84.2% Cogeneration power plant output: TCG 3016 V12: 600 kWel; TCG 3016 V16: 800 kWel Quick solutions through co-operation with MWM Thanks to the comprehensive knowledge and experience of the operating staff of the eight biogas plants, minor problems or malfunctions can often be solved by simply calling a colleague. Furthermore, the team members regularly exchange information about te chnical changes or new features. Major maintenance work is handled by the MWM Service Center in Erfurt under maintenance agreements www.mwm.net

NOVEMBER-DECEMBER 2021 UK POwER NEwS

GENSETS

A 1,100 diesel genset installed at a major hospital in the UK Genesal has provided a GEN1100CC diesel genset for a hospital in the UK’s northwest region. Inside the sets noise pollution has been reduced to minimum levels as peace and quiet for patients in this kind of facility is as important as technical reliability inside the generators, reports UKPN.

enesal has provided a GEN1100CC diesel genset for a hospital in the UK’s northwest region. A company spokesman commented: “At Genesal Energy, we have just supplied emergency power to one of the main hospitals in the Northwest of the UK through the design, manufacture and supply of a 1100 kVA standby generator set ready to work in parallel with the mains." The generator designed by the Genesal Energy enginee ring team guarantees the continuous electricity supply and therefore, the uninterrupted operation of the hospital’s health services in the different areas. “Generator sets must be designed for a quick response – a few seconds – in the event of a mains failure or any other reason involving a power outage. “This is the case of the equipment we designed for this particular British hospital as its main goal is to ensure the electricity supply in all the medical care facilities. This includes operating rooms, hospitalisation plants and other health areas with the greatest precision.”

The spokesman comments: “In addition, noise pollution has been reduced to the minimum levels considering the importance of peace and quiet for patients in these kinds of buildings. Our extensive experience in developing on-demand sol utions for hospitals, regardless of their size and/or location, is one of Genesal Energy’s highlights both in Spain and internationally, as well as the best guarantee of the quality of our equipment.” Genesal Energy’s R+D+I department stated : “There is a common denominator in hospitals: they treat convalescent people. This consequently implies a challenge for the company, as the safety and precision of Ge nesal’s equipment must reach their highest levels, especially in these buildings. “Our generator sets are designed under the premise that nothing can fail, and there cannot be any failures in the process. It is fundamental for every unit which leaves the factory to be utterly reliable so that energy is provided quickly and with the necessary power.” The genset features a Comap InteliGen NTC BaseBox controll er with InteliVision 5

“Generator sets must be designed for a quick response – a few seconds – in the event of a mains failure or any other reason involving a power outage. At this particular British hospital our equipment’s main goal is to ensure a continuity of electricity supply to all the medical buildings.”

display unit. The ComAp InteliGen NTC, a successor of ComAp’s bestseller – InteliGen NT, is a high-end controller suitable for any complex single or multiple gensets paralleling application operating in standby or island mode. The InteliGen NTC is a comprehensive genset controller able to provide parallel operation for up to 32 gensets. According to the manufacturer, ComAp’s InteliGen range of controllers offers unparalleled value, reliability and flexibility. As one of the company’s most popular products, the InteliGen range has become an industry standard for use with single or multiple gen-sets operating in standby or parallel modes. The Comap InteliGen NTC BaseBox controller can be used indenpendently or in conjunction with detachable / external colour displays InteliVision 5, Inte liVision 8, InteliVision 12 Touch, or InteliVision 18 Touch. According to ComAp it can offer a complete integrated genset solution and signal sharing via CAN bus with minimum external components needed. It offers many communication options Ethernet connection (RJ45), USB 2.0 slave interface, 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; S MS messages; ECU Modbus interface and an isolated secondary RS485. The unit features automatic synchronising and power control (via speed governor or ECU), AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR). There are selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A. True RMS (TRMS) is used with Voltage, Current and Power measurement Inpu ts and outputs configurable for various customer needs. Genesal Energy is a manufacturer of generator sets with more than 26 years of experience. From its facilities, located in Bergondo, A Coruña (Spain), the company export its products to more than 30 countries across five continents. A spokesman commented: “We are pioneers in customising generator sets, but to obtain the best results in the market, it is not enough to know what our customer needs. “Co-ordination is also essential to achieve efficiency. That’s why every generator set which leaves our factory is the result of intense work in collaboration with the customer, who is accompanied throughout the process and is supported by all departments.” genesalenergy.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

POWERKITMSERIES Baudouin PowerKit is THE SOLUTION OF CHOICE for data critical backup power with market leading reliability, superior power quality and excellent total cost of ownership Comprehensive product line to meet a wide range of data center requirements

Robust and reliable for secure power provision

Dual starter options for increased redundancy

High transient and block load capabilities

Market leading warranty: 2 years, unlimited working hours

Data Center Power Solutions 600 - 2500 kVA

Durable. Robust. Built To Last.

Discover more at

Baudouin.com/PowerKit-diesel

GENSETS

Temporary power for Falklands military base Woodlands Power has filled a contract to support an MOD contractor working on an electricity grid at an airbase in the Falkland Islands. Temporary power support was required while 39 x 11kV substations were being upgraded on the airbase in the South Atlantic, reports UKPN.

.hile working on an electricity grid at an airbase in the Falkland Islands an MOD contractor needed temporary power support while 39 x 11kV substations were being upgraded on the airbase. The key requirement of the upgrade was that the generators needed to be robust and reliable, as any issues would be difficult to fix, due to limited support and geographical remoteness.. A company spokesman from Woodlands Power commented: "We worked with the customer to perform a cost and usage analysis to understand whether it would be better to hire or buy the generators during the 9-month project. “We also invited him to visit our head office to see the units he was interested in buying in our hire fleet, to allow him to witness the units being tested first-hand and after many hours of service.

“The customer decided to purchase the generators to retain the asset capital after the project finished. We supplied 4 x 500kVA HIMOINSA gensets with upgraded controllers and motorised breakers to allow for synchronisation, as well as all cabling and ancillaries. This included additional alternator upgrades to improve phase imbalance, fullybunded fuel tanks and extended fuel tanks to allow for a buffer in the event of fuel short ages on the island. “To ensure the generators were properly maintained for the duration of the project, we also provided full servicing kit and maintenance training. Our engineers even pre- programmed and configured the generators ready for shipping to the Falklands." From the Industrial Range of 3-phase 50Hz diesel rental gensets HIMOINSA’s HSW-500 T5 500 kVA generator set is powered by a SCANIA engine a nd features a

“We suppl ied 4 x 500kVA HIMOINSA gensets with upgraded controllers and motorised breakers to allow for synchronisation, as well as all cabl ing and ancillaries. This included additional alternator upgrades to improve phase imbalance and fullybunded fuel tanks.”

MECC ALTE alternator. While we discussed several options, based on our & the client’s previous experience this combination was chosen for proven reliability, reputation and worldwide service and spares availability, and to ensure the highest potential resale value should the client decide to dispose of the units at the end of the project. HIMOINSA's collection of three-phase generators use alternating current electric power transmission to distribute power in industrial vehicles and heavy loads. Three-phase generators are common and essential for heavy-duty projects in military projects, in agriculture, industry, construction and commercial operations. Powered by three phases which do not require any other external devices, they give projects constant and sufficient power in a safe a nd hazard-free manner. HIMOINSA's collection of three-phase generators are a key necessity for any heavyduty work to ensure a regular and ample flow of power to enhance productivity and output efficiency. Known for its outstanding output and reliability, HIMOINSA's products are considered top-notch. They are smaller and lighter than outdated generators and offer a constant flow of power. Unlike regular monophasic systems, threephase generators require less copper or aluminium to generate electric power. Furthermore, HIMOINSA's products enable users to obtain a flawless and fuss-free means of power generation in a more costefficient and environmentally-friendly manner. About Woodlands Power A family business launched in 1950, Woodlands Power was one of the first providers of temporary power hire in the UK. More than 72 years later, the company is still offering customers exceptional service and expertise. Its many clients include organisations in the UK and around the world who rely on a full range of power solutions it provides. Woodlands Power is one of the few companies in the UK to operate a 24/7 emergency service. Its wide-ranging fleet of hire generators and in-house transport mean its technical te ams can respond immediately to emergency outages. It can deliver rapidly to minimise downtime. A company spokesman said: “Once you have opened an account, we can typically mobilise our generators within minutes. After that, we will dispatch it to your site.” www.woodlandspower.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

UFR1001E G99/98 compliant Loss of Mains Relay

The UFR1001E system-disconnection relay monitors voltage and frequency in single or three-phase networks. • • • • • • • • • • •

Presetting per G99/98, values as per the standard pre programmed Under and overvoltage monitoring 40…520 V Under and over frequency monitoring 45…65 Hz Monitoring of Rate of Change of Frequency (ROCOF, df/dt) Monitoring the voltage quality (10 minute average value) Response time adjustable 0.05 … 130.0 s, individual setting for each limit Fail-safe, with monitoring of the connected section switch (can be switched off ) 2 automatic restarts on error Supports the mains synchronisation when using generators Measurement 3 phase 3 or 4 wire systems or single phase Self-test Third Part Independently tested Compliant to G99/98 by Bureau Veritas

Tel: +44 (0) 1206 575755

Email: sales@tvri.co.uk www.tvri.co.uk TVR Instruments Limited 143 Butt Road, Colchester CO3 3DP Essex, United Kingdom

WE BRING THE POWER FPT Industrial engines comply with any emission legislations worldwide, always ensuring advantages on performance and efficiency. HI-eSCR2 is a terminological solution to Stage V regulation, granting outstanding results in high performance and total cost ownership.

YOU BUILD THE FUTURE

Learn more at fptindustrial.com Follow us on social media channels.

DELIVERING POWER ON DEMAND Hendy Power is the FPT Industrial authorised distributor for the UK and Ireland. With over 50 years’ experience delivering solutions to meet our customers’ needs, you can be sure we are here to help and support at all times. Contact us to discover more: 22, Brunel Way, Segensworth, Fareham, Hampshire PO15 5SD 023 8038 6233 hendypower.co.uk

BATTERY STORAGE

Europe’s largeest battery storagee facility is in Wiltshire, UK Europe’s largest battery storage project, the 100-megawatt system in Minety in Wiltshire, South West England, is now fully operational. Controlled and optimised by Shell-owned Limejump, the battery will help balance the UK’s electricity demand, providing electricity for up to 10,000 homes for a day before being recharged, reports UKPN.

hell Energy Europe Limited has signed a multiyear offtake agreement in early 2020 to trade all of the power from the the 100-megawatt system its has established in Minety in Wiltshire, South West England. The move - says the company - is part of Shell’s wider work to help accelerate the transition to cleaner energy sources. The Minety project, consisting of two 50megawatt batteries, was developed by Pen so Power and funded by China Huaneng Group and CNIC Corporation. “Flexible storage and supply systems such as Minety have an essential role in balancing supply and demand – especially as renewable power sources become increasingly central to the UK’s energy needs,” David Wells, VP Shell Energy Europe, said. “We fully support the UK’s target of achieving a net-zero emissions society by 2050. Projects like th is will enable that transition.” The Minety scheme is now the largest battery within National Grid ESO’s Dynamic

Containment market, which was set up last year to deal with sudden frequency issues with grid balancing. Limejump is an energy-tech platform that connects and delivers renewable and stored energy to the UK’s electricity system and wholesale markets. As more renewable energy connects to the elec tricity system, supply becomes less predictable and batteries are needed to help National Grid balance supply and demand. Limejump manages more than 400 megawatts of responsive assets, including Minety’s 100-megawatt battery, which can be rapidly dispatched to support the grid when needed. Catherine Newman, CEO of Limejump said: “Delivering the Minety project during Covid has been an amazing team effort, an d with our colleagues at Shell, we can now focus on optimising Minety’s performance and supporting National Grid ESO.” Shell aims to make power a significant business that could sit alongside its oil, gas and chemicals businesses. It is building an

“The Minety scheme is now the largest battery within National Grid ESO’s DC market, which was set up last year to deal with sudden frequency issues with grid balancing. Limejump del ivers renewable and stored energy to the UK’s electricity system.”

integrated power business that includes generating renewable electricity, buying and selling it, storing it and supplying it directly to customers. Developed in t hree stages of 50MW each, Minety Energy Storage is the largest energy storage project in Europe and one of the largest in the world. Luminous Energy developed the project with Low Carbon and it was subsequently acquired by China Huaneng Group (CHG) and Chinese government backed fund CNIC. Minety Energy Storage now stores the excess electricity generated from renewable sources and supplies that power to the grid when needed. It now helps in balancing the UK’s electricity supply and demand while facilitating the country’s transition to a net-zero carbon system. Shell Energy Europe Limited (SEEL), a wholly-owned subsidiary of Shell, signed an agreement to off-take electricity from the initial 100MW battery storage project in February 2020 with Penso Power, who managed the construction of the project on behalf of CHG and CNIC. The site now has the capacity to provide electricity for up to 10,000 homes in a 24hour period before being recharged. Shell and Limejump structured a deal offering revenue certainty for multiple years via the strong backing of Shell’s offtaking capabilities whilst maximising revenues with Limejump’s tech-led battery optimisation and trading skill set. This is pivotal for battery storage de velopers as there is a high degree of uncertainty in UK power markets. The Minety scheme is now the largest battery within National Grid ESO’s Dynamic Containment market, which was set up last year to deal with sudden frequency issues through grid balancing. Limejump, the first company to optimise a battery in the Balancing Mechanism (in 2018) and with 38,000+ hours of optimisation experience (since 2016), will optimise the Minety 100MW battery in the market that offers the best returns for Penso Power, including but not limited to Dynamic Containment, FFR and the Capacity Market. Royal Dutch Shell plc is incorporated in England and Wales, has its headquarters in The Hague and is listed on the London, Amsterdam, and New York stock exchanges. Shell companies have operations in more than 70 countries and te rritories with businesses including oil and gas exploration and production; production and marketing of liquefied natural gas and gas to liquids; manufacturing, marketing and shipping of oil products and chemicals and renewable energy projects. www.shell.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

2 CONFERENCE AREAS – OVER 18 TOP SPEAKERS KEEPING BUSINESS CONNECTED TABLE TOP EXHIBITS

PARK PLAZA, WESTMINSTER, LONDON 8TH DECEMBER 2022

NETWORKING 2 CONFERENCES AMPS AWARDS FOR EXCELLENCE GALA DINNER EVENING

PowerEx Live 2022 aims to feature the unique convergence of traditional players alongside the newly advanced independent power leaders at one of London’s premier exhibition locations – Park Plaza, Westminster, London. The exclusive event looks to bring you an unrivalled line up of world class suppliers and buyers to the Gen-Set / CHP & Data Centre sectors. A great networking & learning experience!

www.powerexlive.co.uk

THURSDAY 8TH DECEMBER

2022

ASSOCIATIONS

Local authorities land sustainable warmth funding - ADE responds T

he Department for Business, Energy and Industrial Strategy (BEIS) released the list of local authorities which have been successful in securing funding as part of the Sustainable Warmth Competition which combines the Local Authority Delivery Phase 3 (LAD3) and Home Upgrade Grant Phase 1 (HUG1). https://www.gov.uk/government/publications/sustainable-warmth-competitionsuccessful-local-authorities Caroline Bragg, Head of Policy at the Association for Decentralised Energy (ADE), said:”It's great to see money out of the door towards making our buildings fit for net zero and the ADE strongly supports the Local Authority Delivery scheme and the Homes Upgrades Grant. “There is such a significant opportunity for UK Plc in retrofitting our homes and workplaces. Now, we need to build on the momentum we now have from COP and the Heat and Buildings Strategy to address the huge potential for higher income homeowners to invest in the energy performance of their homes.” ------------------------------------------------------------------------------------------

Social Energy closes electricity and gas supply business, continues in solar battery optimisation

enewable energy scale-up Social Energy has taken the decision to close its electricity and gas supply business in light of untenable current market conditions, but will continue to operate as a solar battery optimisation company, selling smart battery systems and providing ongoing savings to its customers. The cleantech company with 7,100+ connected solar battery customers acted as the energy supplier for 5,600 of its customers, helping them to keep their bills as low as possible, in addition to the savings that they make from their solar and battery systems. With the current spiking costs across wholesale electricity and gas, Social Energy has been forced to close its retail energy supply business, and like numerous other suppliers, enter Ofgem’s Supplier of Last Resort (SoLR) process. Since its launch in 2019, Social Energy has always had a different business model to many other supply businesses, has never appeared on switching websites or offered loss-leading tariffs. However, with energy suppliers forced to now sell energy at a loss under the Ofgem price cap, the management team have concluded that the UK supply business is no longer viable. Whilst the company will close its Ofgem regulated UK Energy Supply business, Social Energy Supply Ltd., it will continue to run its core business in the supply and optimisation of smart solar battery systems, helping homeowners in both the UK and Australia to vastly reduce their energy bills. This continuation means that Social Energy’s existing customers will continue to receive benefits from their system, with monthly credits earned for taking part in the company’s smart battery community. In taking this difficult decision, the company will protect jobs and customers, and anticipates growth across its primary UK business. Rising energy bills continue to increase the financial case for purchasing a home rooftop solar system, with a connected battery. With prices expected to rise again for billpayers at the price-cap review in April 2022, there will be a greater need for homeowners to explore alternative ways of getting the energy that they need to power their homes and secure long-term certainty, whilst also supporting the UK’s transition to net zero. As the rising costs of energy will impact the most vulnerable in society hardest, Social Energy is also working to expand upon several trials with Social Housing landlords and Local Authorities, to provide an innovative solution that keeps bills low for tenants, whilst delivering a profitable investment to the asset owner. With this growth in mind, Social Energy plans to transition all of its supply company employees across to other parts of the group, reducing the impact to an already hard hit industry. The employer currently operates three UK offices in Gloucester, West Yorkshire and Oxford, running operations for its UK business and supporting its rapidly growing Australian business, which operates out of Sydney, Melbourne, Brisbane and Adelaide.

Embedding ED&I in Public Service Delivery

DI remains a priority concern for leaders of Arms’-Length Bodies; within their organisations and through the diverse range of sectors and public they serve. In this session, ACE members were joined by Sam Lister, DG Strategy and Operations, Department for Culture, Media and Sport (DCMS), Nicola Dandridge, Chief Executive at the Office for Students and finally Dr. Ros Rivaz, Chair of the Nuclear Decommissioning Authority. Department for Culture, Media and Sport (DCMS) has oversight of 45 Public Bodies, the department will shortly release a new Diversity & Inclusion Strategy which will address representation, inclusion and wider understanding. Sam made the case for a robust evidence base to support diversity interventions. Dealing with disadvantage is a fundamental concern for the Office for Students (OfS), which was established by an Act of Parliament which requires attention to address gaps in student participation. OfS seeks to address socio-economic barriers of access to higher education, alongside side ethnicity and, mental health as a strategic priority. Nicola reflected on the particular importance of diversity to regulators: the need to promote rigour of attention and focus on EDI, concluding that consistency of focus is likely to have biggest impact. Context and place impact on diversity for Nuclear Decommissioning Authority. Ros encouraged participants of the session to look at diversity as a necessary feature of employer strategy to address the skills gap post-Covid-19. Summary of considerations for Executives: Clear and ambitious targets are essential in your strategic drive to improve diversity Lean into what’s working Transparency really matters when tackling difficult and sensitive subjects Listen to and learn from lived experiences Be a visible ally & active sponsor Clear and ambitious targets are essential in your strategic drive to improve diversity Strategic and tactical use of evidence is considered highly likely to drive change. Setting ambitious targets and use of metrics can seem crude, perhaps even prove unpopular with colleagues.

Association for Decentralised Energy 6th Floor 10 Dean Farrar Street London SW1H 0DX Tel: +44 (0)20 3031 8740 E-mail: info@theade.co.uk

Have an article published in the IPowerE Journal The IPowerE welcomes technical articles for publication from members and non-members. They can relate to your recent experiences or those sometime in the past. We are interested in articles which cover topics such as, *A description of a new plant or process, commissioning experience of such plant or processes, Performance of such plant. * A description of a new development/ process * Personal experience of a particular period as an engineer We invite you to send in ideas or your completed articles, and they will be considered for publication in the Journal. An article would be a welcome contribution to the Institution. Please send in any ideas and suggestions for articles to the Bedford office. In the first instance provide the title of your proposed article and a one paragraph introduction. ------------------------------------------------P20/20 Vision Powering a New Decade Leonardo Royal Hotel Tower Bridge London, E18 GP To be held on: Thursday 28th April, 2022 IPowerE’s 2021 Technology Seminar and Luncheon will be held at the Leonardo Royal Hotel London Tower Bridge. The day will commence at 10.00am with a technology seminar, followed by a 3-course luncheon and guest speakers in the afternoon. The morning seminar will comprise a multi-stream programme covering a range of technologies and subject matter, so there will be something which is relevant to everyone’s business. The annual seminar and luncheon is well established as a key event.in the calendar of the power and prime mover industries.

NOVEMBER-DECEMBER 2021 UK PowEr NEwS

AMPS

More fuel for debate looking at the Red Diesel Rebate MPS Members will have seen several Current Thinking eshots over the past year or so on this topic. This has been followed ADuring closely by the Technical Committee as it is a regulatory change. consultation and discussion with HMRC, AMPS, and we assume others,

stressed that generating sets and other plant would very often have some red diesel in their tanks at the end of March 2022, as particularly emergency standby sets have low usage. The amendments to legislation are complex and involve changes to several separate laws, thus guidance is forecast to change as these changes are evaluated and implemented. When formal preliminary guidance was published in October 2021, we were surprised to read the following: “Vehicles used for both allowed and non-allowed purposes” If you use a vehicle (including any machines or appliances) which is used for both allowed and non-allowed purposes after the rules change, you will need to either: flush out the tank to remove all traces of rebated fuel when switching uses use full duty paid diesel or biofuels” This goes completely against what was requested. The implication is that as the rental companies have little control over the fuel which the renter uses, then every rental return will have to have its fuel tested to ascertain if red diesel has been used and tanks etc drained and flushed where necessary. Any fuel will have to be disposed of. The problem is that the HMRC will be likely hold the rental company liable for misuse, and in time, which renter used red diesel will be difficult for the rental company to ascertain. Recently we have had several communications from AMPS Members who operate in the rental sector who foresee several problems with the introduction of the new regulations, particularly in the agricultural sector where rebated fuel can continue to be used, but the rental plant is not segregated. Also, the rental companies trade fuel, but are not Registered Dealers in Controlled Oil (RDCO). The guidance - RED DIESEL – REBATED FUEL Examples: A customer hires a generator and tank with 2,000 litres of fuel in January 2022 and returns it with 2,000 litres of fuel. Can this be resold as stock fuel because it was bought it in good faith in January 2022 as red diesel? A customer hires a generator and full fuel tank with 2,000 litres in Jan 2022 and returns it with 1,500 litres in. The next hire will require this tank to be full with 2,000 litres in, so it will be topped up with white diesel, so the mixed fuel will be sold on. A future rental set, manufactured after March 2022, could be returned from an agricultural site with red diesel in the tank, even though it was rented out with white diesel in it. The Member was asked if he wished AMPS to take up the case on his behalf, since we can speak for all our members, not just one and he agreed. AMPS council and the Technical Committee were consulted and were in agreement that we should take the matter further with HMRC. We would appreciate any comments, advice etc. that Members may give and also any other problems that Members may envisage. We ask that this be sent to TechSec@AMPS.org.uk by 5pm Wednesday 8th December. We do know that other organisations are planning to contact HMRC over this issue. Non Road Mobile Machinery – Stage V emissions – transition scheme The NRMM Stage V emissions regulations came into effect following an EU Regulation in 2016, with some details released in 2017. Guidance was given in an industry sponsored FAQ document of which the latest version issued in January 2021 is attached here. A further updated version is expected in the next couple of months. A transition scheme was in place to allow manufacturers and traders to use up existing stock of non-compliant machinery. In simple terms, this was in two phases, as detailed below After the COVID pandemic, interruption to business resulted in lower than expected usage of stock material. As a result, in July 2020 the EU granted an extension to the transition scheme. In June 2021 the EU passed another amendment giving an extension to the transition for plant with a rating between 56 kW and 130 kW, being a 6-month extension for machine production and a 9-month extension for placing on the market. UK Leaving the EU The UK left the EU on 31st January 2020, retaining all existing EU regulations etc. into UK Law. Members are advised that the first amendment was included in the ‘retained’ UK law, regardless of the fact that the UK left the EU on 31 January 2020. This is due to the fact that the terms of the legally binding Brexit Withdrawal Agreement require the UK to implement all EU derived law that is applied prior to the end of the Brexit transition period, i.e. 31st December 2020. The revision will therefore be adopted in the UK in the same way as it is in the EU. The second amendment occurred after the end of the Withdrawal Agreement and does not therefore automatically apply in GB. Given the amount of legislative work underway in the UK, it is very unlikely that it will be formally applied. These requirements do apply in Northern Ireland, however.EEA countries (Norway, Iceland, Lichtenstein) directly apply EU Regulations. Any queries on the above should be addressed to TechSec@AMPS.org.uk NOVEMBER-DECEMBER 2021 UK POwER NEwS

Products & Services electroVolt Introduces Configurable PRISLogic™ Lithium-Ion Battery Modules electroVolt, a developer of application-specific lithiumion batteries and modules, announces its new PRISLogic Lithium-Iron Phosphate (LiFePO4) batteries. Engineered for safety and reliability, the PRISLogic prismatic cells provide the highest level of performance without the cost, complexity, and lead time of a custom-built solution. Designed to support a variety of specialised applications, including data centre backup and telecomms, the 12.8v PRISLogic modules are scalable to 800v. Featuring electroVolt’s BMS Beyond™ each module is engineered from the ground up. electrovolt.com

Upgraded V-162 launched by Vestas Vestas has launched a 6.8 MW version of its V162 range of wind turbines of the EnVentus platform. The V162-6.8 MW is said to be globally applicable and combines an increased power rating and operational flexibility to deliver up to 7 % annual energy production depending on project-specific conditions. The V162-6.8 MW features flexible power ratings of 6.5 MW, 6.8 MW and 7.2 MW and expanded site applicability through an optional larger version of CoolerTop, a trade-marked nacelle cooling design. The performance improvements are said to be achieved through enhanced EnVentus powertrain and power conversion systems. “The V162-6.8 MW demonstrates how our modular product

enhances our ability to continuously innovate and lead the industry in developing customisable and sustainable energy solutions which meet our customers’ needs,” commented Anders Nielsen, Vestas chief technology officer. The V162-6.8 MW is said to benefit from enhanced transportability and siteability, as it will be based on Vestas’ new modularised nacelle concept, whereby the nacelle structure is divided into the main nacelle house containing the powertrain and the side compartment, with the power system including converter and transformer. Both nacelle compartments are designed to correspond to general industry logistics standards for road, rail, and sea transportation with less need for specialised handling. www.vestas.com

The new MAN new E3872 series: 44.0% efficiency and 735 kw power from just a 12-cylinder displacement

AN Engines has developed a biogas and natural gas engines designed for gensets. The MAN E3872 is a 29.6 L 12-cylinder four-stroke engine with spark ignition - a designed based on the MAN E3262 (25.8 L), t. The new engine produces 735 kW at 1,500 rpm. Length/width/height of the engine is 1760 x 1245 x 1410 mm and it has a dry weight of 2160 kg. The new engine uses the same crankcase as the E3262, a model which has been in production since 2010, the bore has been increased to 138 mm (+6 mm) and the stroke has increased to 165 mm (+7 mm). The E3872 incorporates the single turbo concept, a factor which has improved engine efficiency thanks to a fine-tuning of the inlet and outlet guide units (diffuser and nozzle ring). This allows the turbo to operated at optimal efficiency.The engine also uses a new piston bowl design to help accelerate combustion and increase efficiency. The pre-chamber spark plugs, specifically adapted for the combustion chamber, help the mix to combust in several areas, which helps to reduce NOx output. As an additional customer benefit the E3872 is using a hydraulic valve lash adjuster. Thias makes regular checking and adjustment of the valve train unnecessary. Machine operators will benefit from the elimination of routine maintenance intervals and the resulting costs.Other modifications include control times based on the Atkinson cycle. The natural gas and biogas variants of the E3872 engine respectively produce 250 mg and 500 mg NOx. An aftertreatment system (such as SCR) has the potential to reduce this to 100 mg. MAN reports that the efficiency of this engine makes it particularly suitable for power generation applications. The engine operates with natural gas with NOx emissions = 250 mg/Nm³ (5% O2 petrol). A version for markets requiring speeds of 1,800 rpm (60 Hz) is also planned. As part of the process of converting our stationary natural gas engine range to “hydrogen-readiness” the new E3872 will be designed to accommodate a hydrogen (H2) admixture when operated with natural gas. www.engines.man.eu 32

Powering Innovation: Digital Electricity™ accelerates digital transformation for today’s Smart World V

oltServer uses standard data cables and endpoint transformation to efficiently deliver power safely across long distances. According to the company, global digital transformation is well underway, driven by artificial intelligence, a rapidly maturing 5G wireless network and Internet of Things (IoT) systems which deploy billions of intelligent edge sensors to send real-time data to the cloud. VoltServer, Inc is changing the future of energy delivery with its unique, patented Digital Electricity™ technology which safely transmits up to 2kW of power across long distances (up to 2km) using low-cost, off-the-shelf data cables. The 97% power efficiency allows reliable cooling without a fan within a smaller enclosure. They provide the power efficiency that allows the receivers to be placed in tight, enclosed spaces that are too small to accommodate cooling fans. This allows the VoltServer platform to operate more efficiently with much smaller heat sinks and significantly shrinks the receiver footprint. To date, VoltServer has been deployed in hundreds of venues including stadiums, airports, convention centres, office towers, hotels, highrise flats, hospitals and indoor gardens, powering 4G, 5G and Wi-Fi wireless communications, LED lighting and IoT applications. Digital Electricity is a line powering system, which is a means of energizing remote equipment from a centralised location over structured copper cables. It runs high-voltage power over lightweight data cable safely and delivers low current downstream to power loads. VoltServer takes conventional electricity and breaks it into small pulses, or ‘energy packets’. Each packet is sent to a receiver from a transmitter which contains local, embedded processing. Each energy packet is analyzed using a digital signal processing engine to determine that power is being precisely and safely distributed. If a fault is detected, the next energy packet is not sent. Each packet contains only a very small amount of energy, so individually they are not harmful to people, animals, systems or buildings. The receiver converts Digital Electricity back into analog AC or DC to power local loads. Because of its inherently safe energy-transfer design, the VoltServer Digital Electricity™ platform can send power over a distance up to 2,000 metres using off-the-shelf structured copper communications cable and Class 2, low-voltage wiring methods. Similar to power-over-ethernet (PoE), this enables VoltServer to transport both digital data and power in a single hybrid cabling infrastructure, making it much easier and more economical to install than conventional 110/220 electrical systems. This simplicity allows architects, power engineers and facility managers to quickly and easily configure and reconfigure wireless networks, office floorplans and agricultural-grow rooms. Because the platform is natively digital, it provides unprecedented insights into energy use with a centralised dashboard. This gives building operators and maintenance staff a granular view of their electric grid to better manage critical loads while eliminating the need for traditional circuit breaker panels. Vicor ruggedised, passively-cooled BCM® DC-DC fixed-ratio bus converters are designed into the receivers transforming the higher transmission voltage to a safe low voltage to power the loads. www.vicorpower.com

NOVEMBER-DECEMBER 2021 UK POwER NEwS

CLASSIFIED

DIRECTORY OF EQUIPMENT & SERVICES

Innovative technologies for gas treatment and exhaust systems Make it a system with APROVIS.com James Bexon

ITALIAN MANUFACTURER OF GENERATING SETS FROM 3kVA TO 2250kVA

sales@energy-gruppi.it | www.energy-gruppi.it

POWER WHEN YOU NEED LAUNCH OF IT

LAUNCH OF

GF Genovate provide total power solutions for the UK & Ireland Energy markets. Diesel & Gas Generating Units. STOR/CM AND PEAKING CHP SCR SERVICE & WARRANTY IN JULY 24/7/3652021 IN JULY 2021

Heating & cooling thermal management technologies

PROMOTING PROMOTINGCRITICAL/ CRITICAL/ BACKUP BACKUPPOWER, POWER, ENERGY STORAGE ENERGY STORAGE&& www.genovatepowersolutions.com COGENERATION COGENERATION desk@genovatepowersolutions.com

www.hotstart.com

Alternators Made in Italy

Exclusive suppliers of DEIF and Huegli Tech Control and Protection Equipment to the Power Generation Industry Tel: +44 (0)1942 932100 Email: sales@indps.co.uk Web: www.indps.co.uk

Viale del Lavoro, 30 - 37040 Arcole (VR) Italy T. +39 045 7639201 - F.+39 045 7639202 info@linzelectric.com - www.linzelectric.com

UK manufacturer of the PEREGRINE range of engine pre-heater solutions.

ENERGY WHERE NEEDED with INNOVATIVE SOLUTIONS COGENERATION GEN SET

SHORT BREAK

STATIC GAS THERMAL

CYCLE PLUS POWER PLANT

STORAGE

SOLAR CYCLE

OIL & GAS

::: SUHKHDW FR XN

MARGEN s.p.a. Via Dino Ferrari, 50 - 41053 Maranello (MO) - Italy +39 0536 94.36.15 info@margen.it www.margen.it

Service and product provider, specialising in the power generaƟon industry. Sole UK & Ireland distributor for CRE Technology. ExperƟse in land & marine applicaƟons including: G59/3 Relay TesƟng Single/MulƟ Running Systems Paralleling Systems to the UƟlity AVR Replacements Contact: Mr Alistair Hickey Tel: +44 (0) 161 818 8720 Email: sales@totalgeneratorsoluƟons.com www.totalgeneratorsoluƟons.com

+ (0)7HO 20 8848 1912 sales@preheat.co.uk

6DOHV#SUHKHDW FR XN preheat.co.uk

Advertise in this section for 1 year in all 27 publications for as little as £65p/m.

Leaders in complete power solutions Hire, Sales, Service & Maintenance, Contingency Planning, including 24/7 Emergency Response

Diesel Fuel Heaters (QJLQH 3UH KHDWHU 6\VWHPV Fuel Heaters x In-Line 'LHVHO )XHO +HDWHUV Fuel Heaters x Hydraulic +\GUDXOLF 2LO +HDWHUV Tank Heaters x Storage 6WRUDJH 7DQN +HDWHUV Custom Heaters x &XVWRPHU 6SHFLDOV HWF

www.precisioncontrols.co.uk

This includes digital & print copies. Goes out to 28,000+ high quality postal & digital subscribers.

Contact

power@wipmagazines.com

WOODL ANDSPOWER.COM UK : 0845 600 3335 | INTL : +44 138 644 2622

NOTES

ENGINE MANUFACTURERS GUIDE

R Schmitt Enertec GmbH

INNIO Jenbacher gas engines

Headquarters: A-6200 Jenbach (Austria) T +43 5244 600-0 F +43 5244 600-527 jenbacher.info@ge.com www.gejenbacher.com Manufacturer of gas driven generator sets and cogeneration systems in a power range from 0.25 to 3 MW. Model JMS 208 GS JMS 208 GS JMS 312 GS JMS 312 GS JMS 316 GS JMS 316 GS JMS 320 GS JMS 320 GS JMS 412 GS JMS 416 GS JMS 420 GS JMS 612 GS JMS 616 GS JMS 620 GS

Fuel

rpm

g g g g g g g g g g g g g g

1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,500 1,500 1,500 1,500 1,500

Pel 330 335 625 633 834 848 1,063 1,060 844 1,131 1,415 1,820 2,433 3,041

Pth 358 406 731 808 988 1,079 1,190 1,313 892 1,194 1,492 1,792 2,399 3,020

Ratings natural gas standard, NOx ≤ 500 mg/ m3N. Dry exhaust gas; based on 5% O2. For engines with 1,200 rpm please contact GE Energy’s Jenbacher product team. TAD1242GE TAD1640GE TAD1641GE TAD1642GE

352 393 433 485

409 462 509 570

Perkins Engines Company Limited

Peterborough PE1 5FQ Contact name:- Simon Gray Tel: +44 (0) 1733 583000 Email: gray_simon_j@perkins.com Perkins is one of the world’s leading suppliers of off-highway diesel and gas engines, offering dependable cost-effective power up to 2500 kVA in dieselor 1000 kWE prime in gas.

56743 Mendig, Germany T +49 2652 9351810 F +49 2652 9351822 info@rschmitt-enertec.com www.rschmitt-enertec.com Manufacturer of gas driven engines,generator sets and cogeneration systems in the range from 100 - 500 kW. RSE Engines for natural gas and biogas Model

fuel

Freq.

M06-G/B T0D41 g 50 M06-G/B TID41 g 50 M06-G/B T2D41 g 50 M08-G/B TID41 g 50 M08-G/B T2D41 g 50 M12-G/B TID41 g 50 M12-G/B T2D41 g 50 M06-G/B T0D41 g 60 M06-G/B TID41 g 60 M06-G/B T2D41 g 60 M08-G/B TID41 g 60 M08-G/B T2D41 g 60 M12-G/B TID41 g 60 M12-G/B T2D41 g 60 RSE engines for LPG M06-PT0D41 g 50 M06-PTID41 g 50 M06-PT2D41 g 50 M08-PTID41 g 50 M08-PT2D41 g 50 M12-PTID41 g 50 M12-PT2D41 g 50 M06-PT0D41 g 60 M06-PTID41 g 60 M06-PT2D41 g 60 M08-PTID41 g 60 M08-PT2D41 g 60 M12-PTID41 g 60 M12-PT2D41 g 60 RSE engines for Woodgas M06-HT2D41 g 50 M08-HT2D41 g 50 M12-HT2D41 g 50 M06-HT2D41 g 60 M08-HT2D41 g 60 M12-HT2D41 g 60

Electric output 140 kW 200 kW 250 kW 260 kW 333 kW 400 kW 500 kW 150 kW 210 kW 250 kW 280 kW 333 kW 420 kW 500 kW 115 kW 173 kW 205 kW 233 kW 260 kW 350 kW 450 kW 130 kW 173 kW 205 kW 233 kW 260 kW 350kW 450 kW 122 kW 166 kW 250 kW 140 kW 180 kW 275 kW

Volvo Penta

405 08 Gothenburg, Sweden Tel +46 31 235460

SCANIA ENGINES

SE-151 87 Sodertalje Sweden Tel +468553 81000 Fax +468553 898 12 E-mail engines@scania.com Web www.scania.com UK Contact – Mark Swindell Scania GB Ltd Tel +44 1908 329386 E-mail mark.swindell@scania.com Diesel & Gas engines for power generation Prime power 250kVA to 700kVA Stand by power 250kVA to 770kVA Engine range prime power 50hz & 60hz at (70% mean load factor) Scania produce diesel and gas powered engines for various Industrial and Marine applications, superior quality and reliability, offering exceptionally low fuel consumption. All models are available to meet current emissions requirements, Scania engines are now available to meet both Tier 4F and EU Stage V. Alternative fuels Many of our engines can also operate on Bio-diesel conforming to EN14214 and HVO conforming to EN159540

Model Spec RPM kWm kVA 85 TAD530GE Diesel 15002) 75 100 TAD531GE Diesel 15002) 88 TAD532GE Diesel 15002) 113 130 15002) 76 86 TAD550GE1) Diesel 1) 2) 1500 89 101 TAD551GE Diesel 130 TAD730GE Diesel 15002) 113 152 TAD731GE Diesel 15002) 132 186 TAD732GE Diesel 15002) 162 TAD733GE Diesel 15002) 175 201 TAD734GE Diesel 15002) 213 245 1) 2) 1500 114 131 TAD750GE Diesel 15002) 13 152 TAD751GE1) Diesel 15002) 158 182 TAD752GE1) Diesel TAD753GE1) Diesel 15002) 173 199 15002) 217 250 TAD754GE1) Diesel TAD940GE Diesel 15002) 241 277 TAD941GE Diesel 15002) 280 326 TAD1341GE Diesel 15002) 271 315 TAD1342GE Diesel 15002) 303 352 TAD1343GE Diesel 15002) 325 378 TAD1344GE Diesel 15002) 354 412 TAD1345GE Diesel 15002) 388 451 15002) 279 324 TAD1351GE1) Diesel TAD1352GE1) Diesel 15002) 314 365 15002) 328 381 TAD1354GE1) Diesel 15002) 355 413 TAD1355GE1) Diesel TAD1640GE Diesel 15002) 392 461 TAD1641GE Diesel 15002) 430 505 TAD1642GE Diesel 15002) 503 591 TWD1643GE Diesel 15002) 536 630 15002) 393 462 TAD1650GE1) Diesel 15002) 430 505 TAD1651GE1) Diesel Engines are also available for1800rpm/60Hz

Approved Retrofit Solutions for

Stage V equivalent compliance

Meet Stage V emissions standards • Cost effectively upgrade your existing power generators • Future-proof your assets, extend genset life • Eminox fit onsite, minimising downtime • Systems available for gensets up to 7MW

Contact enquiries@eminox.com or visit retrofit.eminox.com

The difference is in the detail Combustion pressure on a piston head is equivalent to 13 tonnes. It’s the same as 12 cars pushing on a 75 mm metal bar, 750 times a minute. That’s why we run billions of hours of tests on our engines and parts. With genuine Perkins parts, you also get a network of hundreds of expert dealers trained to give you the advice and support you need.