Worldwide Independent Power – September 2021 by WIP Magazines

SEPTEMBER 2021 PROMOTING

ISSUE 229 ON-SITE POWER & COGENERATION

www.wipmagazines.com

www.powermediagroup.co.uk

30 Years of Smart Control

EDITOR’S NOTES

SEPTEMBER 2021

FIRE ALARMS ACTIVATE ONBOARD THE ISS DURING RECHARGING

ISSUE #229 Publishing & Events Director Richard Teasdale richard@wipmagazines.com Publisher/Sales DIrector Neb Saric neb@wipmagazines.com Managing Editor Aidan Turnbull aidan@wipmagazines.com Accounts Executive Alison Williams accounts@wipmagazines.com Sales & Marketing Manager Sarah Hallows sarah@wipmagazines.com Far East Sales Bob Liu Shanghai, China bob.liu@ronco.com.cn US Sales & Subscriptions Jelena Milojevic power@wipmagazines.com Austrian & German Agent Mario Dobresko power@wipmagazines.com Power Media International Group,

The recharging of lithium bastteries is believed to be the root cause of a International Space Station on 7th September, 2021. Russia’s space agency, Roscosmos, said the incident took place in the Russian-built Zvezda module and occurred as the station’s batteries were being recharged. The International Space Station (ISS) Electric Power System (EPS) currently uses Nickel-Hydrogen (Ni-H2) batteries to store electrical energy. The Ni-H2 batteries are designed to operate at a 35 depth of discharge (DOD) maximum during normal operation in a Low Earth Orbit. Since the oldest of the 48 Ni-H2 battery Orbital Replacement Units (ORUs) has been cycling since September 2006, these batteries are now approaching their end of useful life. In 2010, the ISS Program began the development of Lithium-Ion (Li-ion) batteries to replace the Ni-H2 batteries and concurrently funded a Li-ion cell life testing project. Each battery assembly has a LITHIUM BATTERIES nameplate capacity of 110 Ah RECHARGING TRIGGERED (396,000 C) (originally 81 Ah) and 4 kWh (14 MJ). This power is fed THE ALERT ON THE to the ISS via the BCDU and DCSU respectively. INTERNATIONAL SPACE The electrical system of the International Space Station is a STATION critical resource for the International Space Station (ISS) because it allows the crew to live

“

The ISS electrical system uses solar cells to directly convert sunlight to electricity. Large numbers of cells are assembled in arrays to produce high power levels. This method of harnessing solar power is called photovoltaics. A lithium battery consists of two electrodes separated by an electrolyte. Typically, the batteries transfer electrical charge from a lithium metal cathode through an electrolyte consisting of an organic solvent containing lithium salts

The Courtyard, 30 Worthing Road, Horsham, West Sussex, RH12 1SL, UK Tel: +44 (0) 1403 888019 www.powermediagroup.co.uk © Worldwide Independent Power (ISSN 1468 7100)

pressure, so if a metal fragment punctures a partition that keeps the components separate or the battery is punctured, the lithium reacts with water the battery or internal component is compromised. The investigation into the cause of this most recent ISS alarm is ongoing but WIP will continue to keep you up to date with any developments.

AIDAN TURNBULL Managing Editor www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

FEATURES

p. 18 | GENSET & FLOODS GENSETS PLAY A VITAL ROLE IN EUROPE’S MAJOR EMERGENCIES

Foods present an ongoing threat in Europe.These began on 14th July 2021 with heavy rainfall. Bruno Generators has played a major role in helping the authorities to cope. The company has supplied the German Civil Protection Department with generating sets. The Fire Brigade has used several Bruno 100kVA generators during the rescue operations, deploying highly customized units

p. 20| GAS ENGINES GAS ENGINES FOR EVEN MORE EFFICIENT ENERGY DISTRIBUTION Mallorca: on the island generated-biogas serves as fuel for an MWM TBG 620 V12K gas engine with an output of 940 kW. Some of the power generated by the engine is fed into the power grid. In order to further expand this sustainable cycle and the plant located at an environmental technology park. This also has an additional MWM TCG 2020 V12 gas

p. 21 | GENSET FOR PORTUGAL CATTLE FARM SPECIFIES A GAS GENSET TO PROVIDE BACKUP POWER IN SPAIN Grupel’s genset has been designed to provide support for a livestock farm in Dumbría (A Coruña, Spain) by operating continuously and in parallel with the regular electrical grid. Currently, the farm has by next year. The fuel which feeds the generating set, biogas, comes from a biodigester with a capacity of 1,500,000 litres, located on the livestock farm. The project consists of a 100kVA cogeneration generator, with a BAUDOUIN engine (6M11G4N0/5 biogas model), GRUPEL alternator (274GB125), and DEIF controller (AGC 150).

p. 22| GENSET PLASTIC SURGERY CENTRE IN GEORGIA GETS GENSET MAKEOVER EMSA has been busy supplying a 400 kVA (2206A-E13TAG2 model PERKINS engine S4L1D-E model Stamford alternator to the AGA Centre in the Eastern European Republic of Georgia. The Aptos Global Aesthetic Centre - used by cosmetologists and plastic surgeons - is one of the largest and most advanced centres of its type in Georgia.

For reader enqurires and subscriptions visit our website at www.wipmagazines.com | powermediagroup.co.uk

p. 24 | COGENERATION CHP FOR WASTEWATER PLANT IN TUNISIA Innio has provided a 527 kWe biogas cogeneration system for Sousse, Tunisia - this will provide a CHP plant for a wastewater treatment facility. Cogeneration or CHP (Combined Heat and Power) solutions from INNIO are designed to generate both heat and power increasing overall power basic structure of INNIO’s Jenbacher CHP systems includes a gas engine/gas generator unit and heat exchangers which use waste heat.

p. 26 | COGENERATION HOSPITAL IN SIENNA GETS COGENERATION SYSTEM SUPPLIED BY COELMO Coelmo has been directly involved in the design, production, installation, commissioning and startup of a 1,011 kWel cogeneration system powered by methane gas. This has been designed to simultaneously supply electricity and heat to a hospital located in the city of Sienna, Italy.

p. 28 | GENSET CONTROLLERS THE DSEM812 - OUTSTANDING GENERATOR REMOTE DISPLAY OPTION INSTALLED IN SOUTH AFRICA DSE’s South African Distributor, Hagar Marketing, reports it has been successfully utilising the new M812 as a genset overview display on two separate projects. One of the project is for a hospital which has three 1000kVA generators providing back-up emergency power.

p.30| GENSETS GENERATORS SUPPLIED TO CANBERRA PLANT have been supplied to a major sewage treatment plant project in Canberra, Australia. diesel generators and turnkey power generation power source expectations.From 10kva to 3000kva, and can be built with any genuine generator engine – from genuine Volvo generator engines, Perkins generator engines & Cummins generator engines,

p.32| LOADBANKS

p.34| POWERPLANT

THE ROLE OF POWER SUPPLIES IN DATA CENTRE RESILIENCE

IRSCHING 6 IS COMPLETED & COMMISSIONED Ansaldo Energia is the EPC contractor Irsching 6, the thermoelectric plant in Germany completed and commissioned this month according to schedule. Irsching 6 is one of Ansaldo Energia’s two turnkey power plant projects currently being implemented in Germany (in addition to Marbach 4, where the customer is Energie Baden Württemberg) and it

Paul Brickman, Sales and Marketing Director at back-up power systems and the critical role of testing. This will never disappear, according to a new data centre industry guide from Crestchic Loadbanks, he reports.

www.wipmagazines.com www.powermediagroup.co.uk

FEATURES

SEPTEMBER 2021

03 EDITOR’S LETTER

08-12

NEWS REPORTS Comment and International News + latest PowerEx Live Show details p.12-14.

16 MARKET REPORT Market projections for Renewables from 2021-2030

ASSOCIATION NEWS Associations: ADE, ACE and iPowerE

38 AMPS How one AMPS Member Company helped Great Ormond Street Hospital

40 NEW PRODUCTS What’s new from the world’s manufacturers.

CLASSIFIED DIRECTORY OF EQUIPMENT & SERVICES Listings of key companies in the industry.

42 ENGINE MANUFACTURERS GUIDE OEMs manufacturing engines today.

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

TOTAL CONTROL FROM EVERY PERSPECTIVE

Anyone who knows gensets, knows Mecc Alte. With a reputation built on more than 70 years of quality and innovation, we do more than simply provide world-class alternators. Mecc Alte gives you the choice of kit you need - including controllers – backed up by all the support and advice you only get from the world’s leading independent alternator specialists. Take 360° Control. Talk to Mecc Alte.

The world’s largest independent producer of alternators 1 – 5,000kVA

FOR FURTHER INFORMATION VISIT WWW.MECCALTE.COM

NEWS

SEPTEMBER 2021

SHELL BEGINS TRADING ELECTRICAL POWER FROM EUROPE’S LARGEST BATTERY BASED IN THE UK

THREE GCW1650P DIESEL 1,650 KVA GENSETS FOR MYANMAR Pramac Asia PTE has installed three generators at a flooring factory in Myanmar. Located in a remote area, the facility suffered from regularpower outages which energy demand for production. three GCW1650P Pramac generators which were installed onsite. The main features of generators include a fairing with special hood and an aAutomatic control panel

TEKSAN GENSET INSTALLED AT SOUTH AFRICAN FOOD FACTORY Teksan has provided three gensets for a site in South Africa: 1 x 1,650 kVA diesel generator with a Mitsubishi engine and 2 x 750 kVA diesel generators equipped with Doosan engines. A company spokesman commented on the contract: “ We were tasked to provide 3100kVA of Standby Power for a very old food production facility. Space to install big generators was non-existent and the distance between mini subs was immense. The project spec was as follows: 2 x 750kVA Teksan™ Doosan Synchronized Generators, a 2500Amp Automatic Change Over, and the task of replacing mains cabling. “We also supplied a 1650kVA Teksan™ Mitsubishi Open Type Generator, a 3,000-litre Bunded Diesel Tank, Custom Radiator Ducting and Exhaust, a 2500Amp Automatic Change Over unit and were contracted to Replace Transformer Cabling and Reroute.” The project took just three weeks to complete and only 12 hours of downtime

WORLDWIDE INDEPENDENT POWER

Europe’s largest battery storage project, the 100-megawatt system in Minety in Wiltshire, South West England, is now fully operational. Controlled and optimised by Shell-owned Limejump, the battery will help balance the UK’s electricity demand, providing electricity for up to 10,000 homes for a day before being recharged. Shell Energy Europe Limited signed a multiyear offtake agreement in early 2020 to trade all of the power from the battery, as part of Shell’s wider work to help accelerate the transition to cleaner energy sources. The Minety project, consisting of two 50-megawatt batteries, was developed by Penso Power and funded by China Huaneng Group and CNIC Corporation. “Flexible storage and supply systems such as Minety have an essential role in balancing supply and demand – especially as renewable power sources become increasingly central to the UK’s energy needs,” David Wells, VP Shell Energy Europe, said. “We fully support the UK’s target of achieving a net-zero emissions society by 2050. Projects like this will enable that transition.” The Minety scheme is now the largest battery within National Grid ESO’s Dynamic grid balancing. Limejump is an energy-tech platform that connects and delivers renewable and stored energy to the UK’s electricity system and wholesale markets. As more renewable energy connects to the electricity system, supply becomes less predictable and batteries are needed to help National Grid balance supply and demand. Limejump manages more than 400 megawatts of responsive assets, including Minety’s 100-megawatt battery, that can be rapidly dispatched to support the grid when needed. Catherine Newman, CEO of Limejump said: “Delivering the Minety project during Covid has been an amazing team effort, and with our colleagues at Shell, we can now focus on optimising Minety’s performance and supporting National Grid ESO.” Shell aims to make power a significant business that could sit alongside its oil, gas and chemicals businesses. It is building an integrated power business that includes generating renewable electricity, buying and selling it, storing it and supplying it directly to customers.

MAN WINS 120MW FLAGSHIP ORDER FOR THE CITY OF LAKELAND’S MCINTOSH POWER PLANT, FLORIDA MAN Energy Solutions will supply 6 x 18V51/60G, the engines with the highest power output in the market, along with the major Balance of Plant equipment to the City of Lakeland, Florida for its municipal utility, Lakeland Electric, which the City of Lakeland owns and operates. Together, Lakeland Electric and MAN Energy Solutions will build a new 120 MW RICE (Reciprocating Internal Combustion Engine) plant on a brownfield site in the city. The new facility will run on natural gas and replace a recently retired, coal-fired plant. This will significantly contribute to Lakeland Electric’s commitment to the community to improve the carbon footprint of their power generation. agreement will ensure, that the plant will be maintained to the highest industry standards for the next 10 years. Wayne Jones OBE, Chief Sales Officer and member of the Executive Board at MAN Energy Solutions, says: “We are very proud, that Lakeland Electric entrusts us with this lighthouse project, which represents a significant milestone for our Power Segment here in the U.S.” . The Lakeland plant will serve as the flagship installation for MAN Energy Solutions. The top-of-the-line 18V51/60 reciprocating gas engine, combined with a very sophisticated, heat-recovery system, has been specifically designed to support the plant’s stand-by operation, matching the utility’s commitment to provide its customers with safe, dependable energy.

www.wipmagazines.com www.powermediagroup.co.uk

NEWS

SEPTEMBER 2021

IN BRIEF

CPS ENERGY, HYUNDAI, OCI SOLAR AGREE TO TEST STORAGE PROJECT WITH RECYCLED EV BATTERIES

COMPLETION OF SALE OF THE UK’S WEST BURTON B CCGT POWER PLANT TO EIG In April 2021 EDF announced the signing of a binding agreement to sell its 1332 MW Combined Cycle Gas Turbine power station and 49MW battery at West Burton B in Nottinghamshire to EIG. As of this month, September, the sale process has completed, the company has confirmed. West Burton B CCGT was EDF’s only gas-fired power station in the UK. It began generating power in 2013 and consists of three combined cycle units with a combined output of 1332 MW - crerating enough electricity for approximately 1.5 million UK homes. Fuel for the turbines is provided by a 19KM gas pipeline supplying gas to the site. EDF is one of the UK’s largest investors in renewables, with 1GW of renewable generation in operation and over 4GW in construction, planning and development across a range of technologies including onshore and offshore wind, solar and battery storage. The company is building its largest offshore wind farm in Britain – the 450 MW Neart na Gaoithe project in Scotland, which will be ready in 2023.

CPS, OCI Solar Power and Hyundai Motor Group have joined forces to build a utility-scale system by a 2022. Hyundai Motor Group will develop the energy storage system, while OCI Solar Power will procure the storage system components and CPS Energy will operate the Energy said: “Evaluating these innovative technologies is be needed to replace fossil fuels.”

MOSS LANDING ENERGY STORAGE FACILITY IS CLOSED OVER ISSUES WITH BATTERY MODULES OVERHEATING A potential overheating issue shut down the 400MW/1600MWh Moss Landing Energy Storage Facility in California, south of San Francisco, USA,earlier this month. The facility operator, Vistra Corp, said in a statement that an investigation is underway into an “overheating incident” at the Moss Landing facility, which did not result in a fire, but has taken the 300MW, four hour storage first phase of the project out of service. “Late Saturday evening, Sept. 4, the Moss Landing Energy Storage Facility experienced an overheating issue with a limited number of battery modules in its Phase I, 300-megawatt/1200-megawatt hour system,” the statement said. An in-built safety system had detected that the modules were operating at a temperature above operational standards and triggered a sprinkler system, bringing the overheating back under control and averting a fire, but the local fire department was called as a precaution in the record heatwave conditions of that weekend. Vistra says it is now working alongside teams from battery manufacturer LG Energy Solution, engineering firm Fluence, and “other external experts” to gather information and begin their investigation into the root cause of the incident.

SK E&S CO. HAS ACQUIRED THE KEY CAPTURE ENERGY COMPANY Utility-scale energy storage startup Key Capture Energy has a new majority owner in a South Korean liquefied natural gas entity. Key Capture Energy and will provide additional capital for the company’s growth plans in the U.S. Started in 2016. Key Capture holds 254 MW in standalone energy storage projects in construction and operation, with another 3,000 MW in the development pipeline. The U.S. energy storage market may total $8.5 billion annually within five years, according to reports. Key Capture CEO and co-founder Jeff Bishop key driver of growth for the company’s next stage. “We are extremely excited to welcome SK E&S as our new owner,” commented Bishop. “Over the last five years, we have built a marketleading team and have starting with small projects,

WORLDWIDE INDEPENDENT POWER

learning by doing, and using those lessons learned from developing, constructing and operating smaller energy storage projects to transition us to the election grid of tomorrow.” The South Korean LNG firm is part of the larger SK group which also is involved in engineering, procurement and construction of power generation projects worldwide. SK E&S has made earlier investments in U.S. clean energy firms, including Sunrun and hydrogen fuel-cell developer Plug Power. www.wipmagazines.com www.powermediagroup.co.uk

LOADBANKS for GENERATORS

THE TRUSTED NAME FOR LOAD TESTING

LOADBANK PACKAGES ■ ■ ■ ■

20kW to 7000kW Resistive Only Loadbanks Resistive / Reactive Loadbanks DC Loadbanks

SALES | SERVICE | RENTAL

Call today: +44(0) 1283 531 645

www.crestchicloadbanks.com

POWEREX LIVE

SEPTEMBER 2021

PowerEx Live 2021

eld on October 6th, 2021, at the prestigious Park Plaza Hotel, Westminster, London, PowerEx Live is the premier event in the Critical/Standby power sector in the UK & Europe. A key feature of this event involves Conference Speakers presenting a wide spectrum of papers to an audience made up of genset users, dealers, agents, purchasers and OEM representatives. rial and full audio/video facilities. Papers/ Presentations will cover several key fields: Gensets, CHP, District Heating/Renewables, Hydrogen Use, Data Centre UPI and Energy Consultancy. • Two conferences under 1 roof in 1 day speakers • Visit 40+ leading companies and Associations from the Critical Power sector exhibiting at the venue: FG Wilson, Kohler SDMO, Cummins, Clarke Energy, Edina, Crestchic, Durr Universal, HMS Industrial, Networks, Industrial Power Systems, IPU Group, Leroy SomerNIDEC, Mecc Alte, Punch Flybrid, Scania, Volvo - and many more. • This is a key networking and industry event • Held at a Covid-secure venue • This year’s AMPS Awards evening will take place at Park Plaza Hotel, Westminster, London on 6th October 2021 where AMPS members will gather to celebrate individual and company achievements within the generating set industry [ticket holders only]. Dave Andrews, chairman of the Claverton Energy ‘Think Tank’, and a current conference organiser for PowerEx, commented: “PowerEx Live 2021 aims to offer the perfect networking opportunities for professionals across the spectrum of industry gensets, combined heat & power and data centre UPS. “I think it really important that industry professionals have a chance to meet together to discuss what’s new on the horizon for energy in Britain, especially in

a post-BREXIT environment.” He explains: “Gensets and CHP are two of the most important elements in Europe’s energy future and certainly have the power to reshape the economies and energy programmes of many nations for years to come. “It is both an honour and privelige to have some of the UK’s top energy speakers prersenting at our Conference. We look forward to a rewarding and stimulating day of both technical revelation and debate .I cannot think of any better way for a serious energy professional to spend his or her day than attending PowerEx Live.” Aidan Turnbull, Managing Editor for PMIG commented: “Both Conferences are running side-by-side from 10am in

opportunity for buyers, dealers,

cables, switchgear and UPS systems to name but a few products. * Situated on London’s iconic South Bank, Park Plaza Westminster Bridge London is just a short walk from Westminster and Waterloo Station. Full address: the venue is the Park Plaza Hotel, 200 Westminster Bridge Road, London, SE1 7UT. * Check the website for the latest news and updates on speakers, times and exhibitor attendance www.powerexlive.co.uk

refreshments - and continue to 4pm in the afternoon. “This represents an opportunity for everyone to engage with our speakers, as well as the 40 or more companies who have come to PowerEx to network, do business and exchange views and ideas.” * Free entry * Optimal networking space * 2 all-day Conferences (14 speakers) * Food and drinks available all day * Techical Experts * A chance to meet with professionals within the energy markets full range of products and services for the power industry, providing a great

SPONSORS

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

22 21

14 13 12 11

M. +44 (0) 7974 321613

38 40

Tel. + 44 (0) 1403 888019 M. +44 (0) 7814 172007 Visit www.powerexlive.co.uk for more

Large Pillar Large Pilllar

38 40

£2,100

less 10% discount

Reserved

41 42

6TH OCTOBER Contact2021 : power@wipmagazines.com

---

Table top

LIFTS ---

Pillars

18 High Quality SPEAKERS

11:30-16:00

Bar backdrop @ ONLY £1,000 Dimensions: 6470 x 1610 mm Material: Blackout PVC

Sponsorship:

BA R

ENTRANC E LIFTS -----

GEN-SET LIVE

14 CONFERENCE CHP & RENEWABLES LIVE SPEAKERS

CHP LIVE

www.powerexlive.co.uk

6 OCTOBER 2021

ENTRANCE (STAIRS)

SPONSORED BY: Pillar wrap (starting from £250)

Awards Dinner

AWARDS FOR EXCELLENCE GALA DINNER IN EVENING in evening 18:45 – LATE.

Table Top No.

30 36 288 3 AMPS APROVIS 42 42 APROVIS CABEL 19 17 AV Industrial Products Ltd. Clarke Energy 44 19 CABEL Crestchic 33 44 Clarke Energy Cummins Technologies 110 ColchesterGenerator Fuel Injection Ltd 33 Crestchic Dmeco 17 Cummins Generator Technologies 10 Dürr Universal 23 38 Deif Edina 16 23 Dürr Universal EJ BOWMAN 48 16 Edina Europgen TBA 24 Eminox Ltd FG Wilson 22 TBA Europgen FINNING 12 FACO SpA(UK)|CAT 37 35 FirePro UK FirePro UK 35 21 Fozmula FleetSolve 28 34 Fuel Storage Solutions Fozmula 21 15 GenCat Ltd Fuel Storage Solutions 34 45 Genovate Power Solutions Gf Genovate Ltd 46-47 6 Hendy Group HMS Industrial Networks 27 27 HMS Industrial Networks Industrial & Power Marine Silencers Industrial SystemsLtd. 545 37 Industrial Power Systems IPU Group (prov.) 13 25 Institution of Power Engineers Kale Auto Radiator 7 13 IPU Group KOHLER | SDMO Energy 32 7 Kale Auto Radiator Mecc Alte 18 KOHLER Power Systems EMEA 32 Piller Power Systems (prov.) 30 43 Leroy Somer / Nidec PRAMAC-GENERAC UK 18 Mecc Alte 31 29 Miratech Flybrid PUNCH 43 420 Moteurs Baudouin Scania 36 PUNCH Flybrid Sincro 14 20 Scania TEKSAN 9 14 Sincro Triangle Cables 811 Switchgear Systems Ltd VP Flexgen 40/41 9 TEKSAN 113 Triangle Walrus Cables Creative Yellow 2 TVR Volvo On Hold Available39

AKSA International (UK) AKSA International (UK) Agriemach Ltd AMPS

Exhibitors

www.wipmagazines.com www.powermediagroup.co.uk

LOWER GROUND FLOOR (-1)

SEPTEMBER 2021

POWEREX LIVE

WORLDWIDE INDEPENDENT POWER

PowerEx Live - Conference Speakers

Noise control experts

Keeping your world clean, quiet, and safe. Dürr Universal is a global leader in the design and manufacture of inlet and exhaust systems for gas turbines and reciprocating engines in the OEM and retrofit markets. www.durr-universal.com Dürr Limited United Kingdom

Phone +44 1455 8944 88 Email solutions@universalaet.com

MARKET REPORT

SEPTEMBER 2021

RENEWABLE ENERGY MARKET OUTLOOK - 2025 - THINGS HAVE NEVER LOOKED BETTER

A new report by Allied Market Research says that the global renewable energy market - which was valued at $928 billion four years ago - is projected to reach $1,512.3 billion by 2025, registering Renewable energy technologies convert the energy from different natural sources such as sun, tides, wind and others, into its usable forms such as electricity. The global renewable energy market is anticipated to grow significantly during the forecast period owing to increased emissions of greenhouse gases (GHGs), particularly CO2 due to utilization of fossil fuels for the generation of energy, reports AMR. In addition, the limited presence of fossil fuel on the earth as well its volatile prices fuels the renewable energy market. However, generation of energy huge investment. This factor is anticipated to hamper the market growth during the forecast period. Furthermore, in the Middle East, fossil fuels are mostly used to generate energy owing to its cost-effective availability compared to other regions.

WORLDWIDE INDEPENDENT POWER

THE GLOBAL RENEWABLE ENERGY MARKET WAS VALUED AT $928 BILLION FOUR YERARS AGO - AND IS EXPECTED TO REACH $1,512.3 BILLION BY 2025, REGISTERING A CAGR OF 6.1% FROM 2018 TO 2025. RENEWABLE ENERGY TECHNOLOGIES ARE TRULY EXPERIENCING A BOOM. This hampers the growth of the market. However, there are many continuous advancements in technologies and increased government funding in renewable energy sector which offer lucrative growth opportunities during the assessment period. The renewable energy market size is increasing due to rise in stringent government regulations regarding climate change in the developed and developing economies. The renewable energy market is segmented into type, end use, and region. Based on type, the market is divided into hydroelectric power, wind power, bioenergy, solar energy, and geothermal energy. Based on end use, the market is categorized into residential, commercial, industrial, and others. Based on region, it is analysed

across North America, Europe, Asia-Pacific, and LAMEA. The Asia-Pacific region is expected to grow at the fastest rate during the forecast period. Owing to increase in demand for energy due to rise in industrialisation in developing countries such as China, and India. These countries give a boost to the renewable energy market owing to factors such as rise in population and rapid industrialisation, along with favorable policies for the renewable energy sector adopted by governments and economies. This renewable energy market analysis covers in-depth information of major industry participants. Some of the major players in the market include ABB Ltd., General Electric (GE), The Tata Power Company Limited (Tata Power), Innergex, Enel Spa (Enel), Xcel Energy Inc. (Xcel Energy), EDF, Geronimo Energy, Invenergy, and ACCIONA. Other players in the value chain of the market include Vestas Wind Systems A/S, UpWind Solutions, Inc., Senvion S.A., and Sinovel Wind Group Co., Ltd. ENERCON GmbH. Key players are adopting numerous strategies such as business expansion, to stay competitive in the market. For

485 MW (gross 1,049 MW) of renewable energy assets, to its portfolio. In addition, Enel won the first ever renewable energy tender in India through its subsidiary BLP Energy Private Limited. Enel is expected to invest $290 billion in the construction of the wind farm. The plant is scheduled to start its operations in the second half of 2019 and is estimated to generate 1, 000 GWh of renewable energy. This expansion has reinforced its presence in the India renewable energy market. Based on type, the market is classified into hydroelectric power, wind power, bioenergy, solar energy, and geothermal energy. The hydroelectric power segment is expected to dominate the market during the forecast period. Furthermore, the solar energy segment is expected to grow at the highest growth rate during the forecast period. www.alliedmarketresearch.com

www.wipmagazines.com www.powermediagroup.co.uk

Providing you with the power to perform Our 5-2500 kVA engines power more than 3 million generators around the world. From standby power generation for factories, offices and shopping malls, and for critical applications in hospitals and at airports, to prime power generation for remote locations like telecommunication towers far from the national grid, our engine range covers the key nodes and emission standards to meet your power generation requirements.

www.perkins.com/ep

GENSETS

SEPTEMBER 2021

GENSETS PLAY THEIR ROLE IN FLOODS & THE COVID EMERGENCY IN EUROPE devastating Germany, Belgium and the Nether-

205 across the continent, while a total of at least 176 people remain accounted for. Belgium accounts for 32 deaths and 18 missing, according to its national crisis centre. In Germany, the hardest-hit country, entire towns were inundated by water, while train lines and roads 173 lives. Members of Germany’s federal disaster relief organization and the rescue services have continued to comb through towns ravaged by the rainfall. Bruno Generators has played a major role in helping with this emergency. The company supplied the German Civil Protection Department with generating sets to cope with the emergency The Fire Brigade has used several Bruno 100kVA generators during the rescue operations, deploying needs. All the units are on trailers, they have a dedicated distribution panel, tailored soundproof canopies and a lot of special options, suitable for emergency hydraulic mast to facilitate rescue operations even at night.

WORLDWIDE INDEPENDENT POWER

I BRUNO also made a valuable contribution during the 2020-2021 COVID-19 health emergency. BRUNO and other companies belonging to the BGG group supplied and setup generating sets for hospitals and intensive care departments within a very short time. The sites involved included the new hospital at the Milan Exhibition Centre, where a complex and critical facility was built in less than a week, working nonstop, The Hospital Camp of Piacenza, The Hospital of Imperia and The San A spokesman for the company

commented: “We have also directly set up systems with our generators in the main hospitals of Marche, Abruzzo, Molise and Puglia in Italy. BRUNO has also made its contribution during the emergency by donating a pulmonary ventilator to the Ariano Irpino’s hospital centre. Our internal Research and Development department has also contributed to the design of protective visors for healthcare purposes, making the the ingenuity and technical expertise we have available for the conversion of certain production workers.”

www.brunogenerators.it

www.wipmagazines.com www.powermediagroup.co.uk

POWERING YOUR WORLD

adeltd.com

CHP

SEPTEMBER 2021

SUSTAINABLE ENERGY CYCLE FOR MALLORCA: GAS ENGINES PRODUCE ECO-FRIENDLY ENERGY

allorca’s environmental technology park processes more than 730,000 t of waste a year. Apart from the material created by infrastructure, the additional waste caused by tourism also represents a challenge for the island with regard to the waste disposal and processing. Thus, the so-called “zero-waste” model is employed to handle the waste problem: in Mallorca’s environmental technology park, all waste from the Balearic island is either used as raw material or transformed into energy in recovery plants. The objective of the model is to upgrade all waste in such a way that it can be reused as material or for energy generation purposes. Any waste which cannot be utilized is to be eliminated in an eco-friendly manner. F ollowing a meticulous separation process, any waste that cannot be recycled is used to generate energy whenever this is possible. The environmental technology park’s recovery plant thus generates enough energy to cover the consumption of about 53,000 households. In a methanization plant, biogas is gained from the digestion of organic waste. This utilization process also yields methane gas, which is used as fuel for the production of electrical energy. The digestate, for example, the residual material which is left over after the digestion process, is transferred to the composting plants. The generated biogas serves as fuel for an MWM TBG 620 V12K gas engine with an output of 940 kW. Some of the power generated by the engine is fed into the power grid. In order to further expand this sustainable cycle and the plant of the environmental technology park, an additional MWM TCG 2020 V12 gas engine with an output of 1.2 MW and an overall

gas engines, and containers achieve of the energy potential of biomass.

segments. MWM also provides the

engines, complete plants, and containers for combined heat and power (CHP) generation. MWM cogeneration power plants (CHP plants) enable economic,

processing and treatment. Where gensets are installed in remote areas, the generated energy can even be used exclusively by the plant.

The onsite plant transforms the employed energy into electrical energy and heat. MWM’s CHP plants,

For more information please visit: www.mwm.net

the purpose of modernizing the facilities. In addition to the gas engine, a biogas treatment system consisting of a biogas engines was installed for the modernization project. The two MWM gas engines produce the heat energy than the entire system needs. The excess power is fed into the local power grid and contributes to the island’s supply with clean, ecofriendly energy. Energy from biomass can make a

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

GENSETS

SEPTEMBER 2021

SPECIAL BIOGAS PROJECT INITIATED TO SUPPORT A KEY LIVESTOCK FARM IN SPAIN

rupel recently provided a genset which runs on biogas for a special livestock farm project in Spain. The move meets global trends in power generation and the company’s own strategy of growth which involves employing alternate energy source other than diesel diesel. Pedro Gonçalves, Grupel’s Sales and Marketing Director, commented commented: “The daily work of

world. in order to make them increasingly more versatile, agile and capable of serving many applications, in a wide variety of contexts and conditions. This process also involves alternating the generator sets’ energy sources.” Grupel’s new genset has been designed to provide support for a livestock farm in Dumbría (A Coruña, Spain), operating continuously and in parallel with the regular electrical grid. expected to grow to 1,000 by next year. The fuel which feeds the generating set, biogas, comes from a biodigester with a capacity of 1,500,000 litres, located on the livestock farm. The project consists of a 100kW cogeneration generator, with a BAUDOUIN engine (6M11G4N0/5 biogas model), GRUPEL alternator (274GB125), and DEIF controller (AGC 150). block load capabilities, f ull duty cycle capability, from prime to continuous power, and a low energy fuel The DEIF The AGC 150 Genset controller contains all the necessary functions for control and protection of a genset. The slim design makes the genset controller suitable for paralleling even small gensets thus the AGC 150 can be integrated in nearly all types of gensets. The AGC 150 provides up to three levels (customer, service, and master) of password-protected and role-

Over the years, Grupel has been solutions for various types of applications, particularly for the agricultural sector, Pedro says. The generators produced for this purpose are able to support the producers in all stages of their activity with power and heat. Being an area which is increasingly more automated and dependent on machinery, any kind of power failure, however short, can jeopardize the conditions of the facility and various processes ranging from feeding to the treatment of livestock, putting at risk the survival of animals. A reliable power source is considered to be of critical importance. The generators designed for continuous use are ideal for this purpose, where there is heavy machinery and highly automated processes. supply 24-hours-a-day, avoiding

failures and losses. However, constant operation is more demanding and naturally entails higher consumption and more expenses compared to standby operation (when there is a grid failure). So, a fuel solution such as biogas, which results from the transformation of organic waste to produce biofuel, is ideal. This type of fuel is, nowadays, widely used for the generation of thermal and electrical energy in various contexts. Besides ensuring a decrease in costs normally associated with other types of fuel, biogas also ensures greater sustainability at an environmental level. All this, combined with the integration of a cogeneration system, of the genset, since the use of heat reduces the energy losses of the installation, reports GRUPEL. www. grupel.eu

have only relevant parameters displayed. The controller is made of robust materials and is built to last. It has undergone several tests showing that it stands wear and tear in all types of harsh environments. Also, the controller is suitable for PV-Diesel hybrid DEIF. Since this is a cogeneration system and has been designed to reuse thermal energy, a heat exchanger for the exhaust gases and a plate heat exchanger for the engine cooling system have been installed in this generator. These exchangers will allow the heat (from the exhaust gases and the combustion of the engine) to be used to heat water, which can then be used for various biodigester. The generator also has a gas ramp with pressure control, installed prior to fuelling the engine. It is a high-performance genset, robust, soundproof, and application. www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

GENERATORS

SEPTEMBER 2021

GEORGIA’S COSMETIC SURGERY COMPLEX THE AGA CENTRE - HAS BOUGHT A NEW GENSET

MSA has supplied a genset powered by a 400 kVA (2206A-E13TAG2 model PERKINS engine S4L1D-E with a Stamford alternator to the AGA Centre in the Eastern European Republic of Georgia. The Aptos Global Aesthetic Centre - used by cosmetologists and plastic surgeons - is one of the largest and most advanced centres of its type in Georgia and has served the region for more than 30 years. It will now be fully powered-up thanks to energy provided by the generators manufactured by EMSA. EMSA has an impressive track record of supplying 102 countries. Aptos Global is one of the largest centres in Georgia and holds an important position in the region – the thanks to the EMSA generators. cosmetic surgery services to Georgia’s population as well as individuals around the world, says its management. Aptos has an important position in the local economy the possibility of power cuts. The hospital reviewed its options and approved the EMSA generator - which is a well-known brand around set. This set features water cooling, remote control and noise insulation features. Additionally, the generator includes a hospital-type silencer and has a reputation of easy maintenance with a well-designed fuel and oil level control panel. The 2206A-E13TAG2 model PERKINS engine S4L1D-E Diesel Engine - ElectropaK - provides 349 kWm at 1500 rpm and 381 kWm at 1800 rpm. It provides mechanically operated unit fuel injectors with electronic control combined with carefully matched turbocharging, giving excellent fuel atomisation and combustion with optimum economy.

WORLDWIDE INDEPENDENT POWER

Low emissions result from electronic control of fuel injected and the engine was developed and tested by Perkins using the latest engineeranalysis for high reliability, low oil usage and low wear rates. High compression ratios ensure clean rapid starting in all conditions, reports the company. The engine’s exceptional power-toweight ratio and compact size give optimum power density for ease of installation and more costbeen designed to provide excellent service access for ease of maintenance. The 2200 Series engine has been developed using the latest on the strengths of the already very

successful 2000 Series family and addresses all of today’s uncompromising demands within the power generation industry, says Perkins. Developed from a proven heavy-duty industrial base, these products reliability. The 2206A-E13TAG range is known for its 6-cylinder, turbocharged air-toair charge cooled diesel engines. Its premium features provide exceptional power-to-weight ratio resulting in exceptional fuel consumption. The overall performance and reliability characteristics make this the prime choice for today’s power generation industry. www.emsa.gen.tr www.perkins.com

www.wipmagazines.com www.powermediagroup.co.uk

TRUSTED KNOWLEDGE. TAILORED SOLUTIONS. If you have concerns about fuel quality, speak to an experienced IPU fuel expert about our industry-leading fuel and environmental managed services.

compliance through OFTEC surveys to subsequent remedial recommendations, installation of polishing systems and scheduled maintenance routines. And, as a leading OEM in fuel systems, we are in a unique position to design and manufacture the solution most tailored to your needs.

With decades of experience in the global Oil and Gas sector, operating in some of the world’s most demanding ATEX environments, we fully understand the hazards and challenges you may face – which is why you can rely on our pro-active and undiluted support at all times.

Crucial Expertise for Critical Applications.

OFTEC INSPECTIONS

REMEDIAL WORK

FUEL FILTRATION AND CONDITIONING

More details at www.ipu.co.uk IPU Group, Cygnus Way, West Bromwich, West Midlands, B70 0XB. Telephone +44 (0)121 511 0400

MEMBER

CHP

SEPTEMBER 2021

COGENERATION SYSTEM FOR THE SOUSSE WASTEWATER TREATMENT PLANT, TUNISIA

nnio has provided a 527 kWe biogas cogeneration system for Sousse, Tunisia - it will provide a CHP plant for a wastewater treatment facility. Cogeneration or CHP (Combined Heat and Power) solutions from INNIO are designed to generate both heat and power increasing overall power plant The basic structure of INNIO’s Jenbacher CHP systems includes a gas engine/gas generator unit and heat exchangers that use waste heat. A wide range of heat sources - from gas engine cooling water and oil to an give each individual customer the greatest a high degree of reliability and availability at sites across the world. Jenbacher gas engines provide a power range of 200 gas or a number of other gases. They furnish onsite power, heat and cooling for a variety of commercial, industrial and municipal applications – particularly renewable and waste-to-energy, industrial power generation and cogeneration/CHP (combined heat and Jenbacher gas engines have been delivered in 100-plus countries. Work began on the wastewater treatment plant project in Tunisia in 2017 with the award of the contract to a Chinese hydroelectric engineering and construction company. Costing US$25m, the Sousse wastewater treatment project, located on the east coast of Tunisia, treated water is being used to irrigate groundwater. “The Tunisian Sousse wastewater treatment project is factory treats 60 percent of the domestic and industrial water in Sousse,” said Hu Pingjun, manager of the Sousse wastewater treatment project.

Riadh Mouakhar, Tunisian minister of commented: “This wastewater treatment plant will have a grand improvement of the entire province of Sousse in light of many assets, including water recycled for the agriculture sector.” The Tunisian minister concluded: “This project is distinguished by the fact that it will also favour the production of electricity by cogeneration, which will reduce the operating cost, essentially based on energy.” Tunisia has limited water reserves, estimated at 4.880 billion cubic metres per year. Of these reserves, around 4.660 billion cubic metres can be mobilized. on average, 3.680 billion cubic metres get used (86 percent). Approximately 56 percent of the water deposits consist of surface waters and are therefore dependent on the rainfall. with arid climate. With around 4.66 billion cubic metres accessible water reserves Tunisiamust make the most of what it has. The precipitation decreases from north to south (average 1,200 millimeters/year to 50 millimeters/ year), so the water reserves vary

WORLDWIDE INDEPENDENT POWER

greatly in the seven bioclimatic zones. Over 80 percent is generated by the agricultural sector, while around 14 percent is provided as drinking water. With unchanging infrastructure the UNESCO is expecting serious problems with water supply for Tunisia from 2025 onwards. Increasing water consumption caused by a highly progressive industrialization of the country and the resulting water pollution are further factors for the long-term water. In the textile industry, in particular laundries, dyeing and to the contamination of the already limited water resources. Due to the industrial progress an increased use In Tunisia, collected wastewater – consisting by 90 percent of household wastewater – totals around 247 million cubic metres per year with 242 million cubic metres per year treated wastewater; this is about 5 percent of the mobilized water resources. In 2014 around 240 million cubic wastewater treatment plants (WWTP) throughout Tunisia. www.innio.com

www.wipmagazines.com www.powermediagroup.co.uk

TCG

2032 High reliability. Low operating costs.

MWM gas generator sets of the TCG 2032 series are perfectly tailored to the challenges of a dynamic market environment. In the power range of 3,000 – 4,500 kWel reliability, flexibility, efficiency and environmental compatibility are ensured along with low life-cycle costs. In this way, they meet the high requirements of a wide range of applications and are highly profitable. www.mwm.net

GENSETS

SEPTEMBER 2021

SIENNA, ITALY, BUILDS NEW COGENERATION PLANT POWERED BY METHANE

OELMO has been directly involved in the design, production, installation, commissioning and startup of a 1,011 kWel Cogeneration System powered by methane gas to simultaneously supply electricity and heat to a hospital located in the city of Sienna, Italy [right]. metre soundproof canopy, heat recovery system, oxidation catalyst for CO2 emissions abatement and remote supervision system. The supply contract includes installation, technical supervision of assembly, start-up and a test run of the cogeneration system. Coelmo has previously designed, produced, commissioned and started-up a similar cogeneration system for a company based in the industrial wastewater treatment sector in Marcianise, Italy. Here, the company was involved in the installation, technical supervision of assembly, start-up and test run of 2 units of 850 kWe Cogenerators, powered by a double methane-biogas gas train, customised 12-metre container, with remote supervision system [below]. COELMO has specialised in the production of cogeneration and trigeneration plants for various application sectors. The company’s CHP-Combined Heat Power (CHP) systems allow the simultaneous production of two forms of energy, electrical and thermal, through the same conversion process using a single primary energy

source. The use of cogeneration allows the user to increase the systems, realizing a primary energy saving compared to traditional modes of generation. At San Gennaro Vesuviano, near Naples, COELMO was involved in the design, production, commissioning and start-up of a trigeneration cogeneration for an agri-food company [below]. The system installed here was a 400 kWe Trigenerator module fuelled by methane, installed in a special 9-metre container with double-heat recovery, a lithium bromide absorber for cooling production and remote

WORLDWIDE INDEPENDENT POWER

management system. Two recent cogeneration plants were also supplied by COELMO for Acerra. These provide heat & power for two civil and industrial wastewater treatment facilities [bottom of page]. COELMO was involved in the installation & technical supervision of the assembly, start-up and test run of two cogeneration units of 375 kWE each, fuelled by natural gas and biogas. These were also supplied with blowers and double gas ramps. and an LV / MT electric transformation cabin (400V / 6 kV). www.coelmo.net

www.wipmagazines.com www.powermediagroup.co.uk

WHY

• 20 years of experience in the genset industry • We apply Quality Management System in all our processes

• Superior performance, reliable and continuous power generation • Our special engineering solutions for your special projects • “Life Goes On” 24/7 service

ARKEN JENERATÖR A.Ş. İSTANBUL HEADQUARTER Haracci Mahallesi Dolmabahçe Caddesi No: 22 Arnavutköy / İstanbul tel: 0 212 424 0 275 • fax: 0 212 424 0 285 İSTANBUL DISTRICT OFFICE OF ANATOLIAN SIDE Cumhuriyet Mah. Nurol Sokak No:31 Üsküdar / İstanbul tel: 0 216 316 0 917 • fax: 0 216 316 0 918

DISTRICT OFFICE OF ANKARA 100. Yıl Bulvarı, 1230 Sk. No:2, Ostim / Ankara tel: 0 312 443 0 055 • fax: 0 312 443 0 066 DISTRICT OFFICE OF IZMIR Atıfbey Mah. Akçay Cad. No:274/2 Gaziemir / İZMİR tel: 0 232 224 17 35 • fax: 0 232 224 35 17

DISTRICT OFFICE OF ANTALYA Akkuyu Mah. Anadolu Cad. T. Bilginler Apt. No:142/B Konyaaltı / Antalya tel: 0 242 222 0 717 fax: 0 242 222 0 718

info@arkenjenerator.com www.arkenjenerator.com arken_jenerator JeneratorArken arkenjenerator arken jenerator

CONTROL TECHNOLOGY

SEPTEMBER 2021

THE DSEM812 - OUTSTANDING GENERATOR REMOTE DISPLAY OPTION IN SOUTH AFRICA

SE’s South African Distributor, Hagar Marketing, reports that it has been successfully utilising the new M812 as a genset overview display on two separate projects.

1000kVA generators providing backup emergency power. MKII load share modules with a single 8660 MKII mains complete system overview from a single location. The second project is for a shopping mall. The mall has three 8660 MKII installed with three 11kV incoming with an 8610 MKII. The DSE 8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE 8610 MKII control modare unrivalled across the generator control industry. New features were added to this in May 2020. The three 8660 MKII have PLC logic to control two bus couplers. The user wanted full system control and the ability to simulate a mains failure and mains return using a dedicated button and also a dedicated button and its ability to present multiple information strings on a single screen. The DSEM812 is a 12” Programmable Display designed for use on gensets and is the largest display in DSE’s programmable display range. Developed for use as a standalone product or with the DSEM64x programmable controllers, the DSEM812 provides be RAM or panel mounted and has the option to use in portrait or landscape orientation. OVERALL SIZE 330 mm x 210 mm x 63.5 mm (12.99” x 8.26” x 2.5”)

WORLDWIDE INDEPENDENT POWER

WEIGHT 2.12 kg PRODUCT VARIANTS M812-01 - CODESYS (With Buttons) M812-03 - Qt (With Buttons) T M812-02 - CODESYS (Without Buttons) M812-04 - Qt (Without Buttons) The DSE 8660 MKII is the latest and most advanced Auto Transfer Switch & Mains (Utility) Control Module within the DSE synchronising and load sharing control module range. Developed alongside the DSE 8610 MKII, this control module provides industry-leading features and type generator installations. The DSE8660 MKII is an easy-to-use single or multi-mains controller with

automatic transfer switch capability. Designed to synchronise single or multiple DSE8610 MKIIs and DSE8680 MKII with single or multiple mains (utility) supplies, the DSE8660 MKII will automatically control the change over from mains (utility). Deep Sea Electronics is one of the world’s top manufacturers of generator controllers, auto transfer switch controllers, battery chargers The company employs over 200 people across four continents and sells its products to 150 countries through its comprehensive distributor network. More information? Visit www.deepseaelectronics.com

www.wipmagazines.com www.powermediagroup.co.uk

GENSETS

SEPTEMBER 2021

THREE 1,800 KVA DIESEL GENSETS FOR A SEWAGE TREATMENT PLANT IN CANBERRA, AUSTRALIA

eece Mitchell – Marketing Manager for have hit the road for the long journey to their

project in Canberra, ACT.” diesel generators and turnkey power generation power source expectations. are fully customised and can be built with genuine generator engine – from genuine Volvo genset engines, Perkins generator engines, Cummins generator engines, CAT generator engines, Kuboto generator engines and more. professional services. Backup commercial generators are a sound solution when it comes to emergency backup power for these kinds of facilities. When installing a commercial backup generator for a sewage & water treatment plant, it’s important to note that it is not a simple matter of buying a generator and installing it onsite at the facility. The generator must be properly sized to meet the facility’s power needs, installed safely and properly, as well as regularly serviced & maintained. Sewage treatment plants are designed to treat wastewater where no mains sewer connection is available. The treated water is suitable for discharge to a ditch or stream, which is always the preferable option for discharge if available. A reliable source of power is key to help to ensure that operations can continue even in the event of a power outage. Backup commercial generators are a sound solution when it comes to emergency backup power for these facilities.

WORLDWIDE INDEPENDENT POWER

One of the most commonly installed generators in the market for emergency backup power and standby generator selections is a diesel generators unit. Widely regarded as versatile and cheap to run, diesel gensets can be used across various industries, maintenance intervals. The downside to diesel units is that their maximum operating runtime is restricted by the capacity of their fuel tank. If you choose to install a commercial diesel generator for your business or facility, be sure to work

out a plan to replenish your diesel fuel supply. Bear in mind that if the plan includes having diesel fuel delivered to your location, it may remote area prone to bad weather or natural disasters . It’s worth thinking ahead by which can be stored onsite in the event of an emergency to replenish the generator’s fuel supply. www. eneraque.com

www.wipmagazines.com www.powermediagroup.co.uk

Optimized for Your Operation Volvo Penta’s Stage V solution is designed especially to ensure dependable power generation, complying with emission standards while ensuring maximum engine efficiency. Optimized productivity, no compromise. The engine and exhaust aftertreatment system are developed together as a complete, single-supplier package. It’s a solution that makes life easy for OEMs and brings ease of operation, fuel efficiency and uninterrupted productivity to mobile units for prime power generation regardless of conditions and climate. And the Volvo Penta global service and support network is always there to back you up. www.volvopenta.com/stagevge

Stage V for power generation

LOADBANKS

SEPTEMBER 2021

AVOIDING DOWNTIME: THE ROLE OF POWER SUPPLIES IN DATA CENTRE RESILIENCE

lthough there has been a material change in power production, with greener solutions favoured above traditional power sources, the need for back-up power systems and the critical role of testing will never disappear, according to a new data centre industry guide from Crestchic Loadbanks. The guide explores the critical role of both backup power and load testing solutions in the resilience strategy of data centres - from server emulators in the testing and commissioning phases to multi-megawatt resistive/ reactive units used for more regular testing of back-up power systems. Drawing on many years in the sector, the guide also explores the changing energy mix and its impact on power resilience and reliability as demand itself Paul Brickman, Sales and Marketing Director at Crestchic Loadbanks, explains: “In the most critical area - the data halls, which are home to the servers, arranged in rows of cabinets or racks - there is a continuous need for power and cooling. This is no great surprise to any data centre operator, a robust set of systems to deal with power failures and to ensure cooling is always available. However, while most operators full appreciate the need for back-up power, the problems arise when tain their back-up power systems.” To help, the team at Crestchic created a White Paper which highlights the various areas of a data centre that in the face of an outage, as well as the types of technology that suit the job in hand. These include: resistive-only load banks typically up

WORLDWIDE INDEPENDENT POWER

to 300kW for heat load testing; rack mounted server emulators for heat load testing; capacitive load banks to test with the leading power factor often associated with servers; multi-megawatt, medium voltage load bank packages to test and synchronise multigenset systems on a common bus with a lagging power factor. They also include DC load banks to test UPS systems for close battery analysis and discharge performance; and resistive-reactive load banks for testing the whole system operation in an emergency change-over scenario. Founded in 1983, Crestchic is one of the world’s leading specialist manufacturers of loadbanks which are

used in the testing of power supplies in the most demanding climactic and environmental conditions across seven continents. Operating from locations in the UK, North America, China, Singapore, Netherlands, France, Germany, Brazil and Dubai, the company is at the forefront of innovation and design, with thriving sales and rental operations and a loyal and growing customer base worldwide. For more information, or to download a copy of the White Paper, entitled The constant role of loadbanks in the ever growing data centre sector, visit https://crestchicloadbanks.com/ data-centre-guide/

www.wipmagazines.com www.powermediagroup.co.uk

! New Set Sales ! Genuine Parts ! On-site Service Support ! Overhaul & Repair ! UK-wide Coverage ! 24 hr Call Out

Head Office: Fulwood Road South, Sutton-in-Ashfield, Nottinghamshire NG17 2JZ Email: sales@mitchells.co.uk www.mitchells.co.uk

GAS TURBINES

SEPTEMBER 2021

ISCHING 6 IS COMPLETED & COMMISSIONED

nsaldo Energia is the EPC contractor on Irsching 6 and thanks to its hard work and diligence the thermoelectric plant in Germany has been completed and commissioned this month according to schedule. Irsching 6 is one of Ansaldo Energia’s two turnkey power plant projects currently being implemented in Germany (in addition to Marbach 4, where the customer is Energie Baden Württemberg) and it is one ensure the stability of the electricity grid,. It can renewable energy. At the heart of the plant is the 300MW AE94.3 gas turbine and its generator built by Ansaldo Energia at its plant in Genoa. “The start of the Irsching plant and the fruitful collaboration with Uniper shows that Ansaldo Energia, with its expertise and products, is a reliable partner at European level in the energy transition scenario,” explains

the power grid, ensuring its operational continuity.” The AE94.3A is the natural choice when the F class at the lowest investment cost, ensured by a proven consolidated technology, says the manufacturer. The AE94.3A is considered suitable both for combined and simple cycle applications. The proven design of all its components, the rotor construction with the internally air cooled hot gas path and the uniform temperature distribution, due to the annular combustion chamber, ensure optimum balancing of the

premix mode with no water consumption, thus minimising the plant and operating cost and the layout area. In particular, the premix combustion with fuel oil allows operators to keep NOx emissions down to 60 ppm in dry mode while even lower levels (down to 25 ppm) are possible by adding a very limited amount of water. Quick and reliable fuel change over

technology in the F class market, says the company. The AE94.3A Custom- Fast start, fast ramp and hot restart capabilities

and viceversa are available as well.

dependable fuel switch over and dry mode operation for both gas and oil High reliability - Easy maintenance with tailored service plans and high availability Fast track project.

operating hours cumulated and more

www.ansaldoenergia.com

hot restart time and grid support capability. In addition, thanks to those characteristics combined the best solution for peak plants. Options to reduce the minimum environmental load keeping at the same time the machine ready for grid support, provisions for inlet cooling and/or air preheating are available as well to optimise the load. As a result of fuel gas premix combustion extension possible throughout the entire operating range, including all transient conditions. A wide selection of fuels, ranging from hydrogen

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

Using the new PUNCH Power 200 flywheel energy storage system with a single tower crane enables emission savings equivalent to the emissions of 21 cars. The PUNCH Power 200 allows a typical crane to be operated with a 100kVA instead of a 300kVA generator set! This enables fuel savings in excess of 50%. Think about this the next time you see cranes operating on a construction site in a city centre.

ASSOCIATIONS

SMART ENERGY TECHNOLOGY SHOWCASED AT PARLIAMENTARY RECEPTION The Association for Decentralised Energy showcased how smart energy technology lies at the heart of a net zero system at a Parliamentary reception held this month, ahead of global discussions on climate change at COP 26 later this year. The gathering of businesses from across the heat network, energy efficiency, heat pump, smart energy and combined heat and power sectors was an opportunity to highlight to senior government ministers the critical role the decentralised sector is playing in breaking through the most important challenges that stand in the way of the UK reaching net zero. These challenges centre on how we generate, flex, store and manage our electricity and heat. The reception, hosted by the ADE’s President Lord Duncan of Springbank, was attended by senior politicians including shadow energy minister Alan Whitehead. Recognising the importance of smart energy technology in the transition, the Secretary of State, Department for Business, Energy and Industrial Strategy The Rt Hon Kwasi Kwarteng MP gave the headline address. In his speech he recognised the need for the energy sector to work with Government to find the solutions for a decarbonised system. The Rt Hon Kwasi Kwarteng MP said: “We are trying to change the world, change the way we do business, the way we fuel our economy, and the way we live. It’s a complete whole systems transformation, and I think that’s one of the most exciting aspects of it, but also one of the most daunting. “There’s no way that a government minister, with great civil servants, can navigate on its own towards this goal. The parliamentary sector and the private sector have to work together, and I think that the work that you do is a great example of how we can co-operate. “What the ADE does is really a prime example of what can be done.” The event was sponsored by energy data company and ADE member Stark. Stark empowers organisations to better manage energy through data and analytics.

WORLDWIDE INDEPENDENT POWER

SEPTEMBER 2021

ACE WELCOMES £30 BILLION PIPELINE FOR 2021

73RD ANNUAL LUNCHEON 20/20 VISION AND TECHNOLOGY SEMINAR - 2022 Don’t miss he Institution of Power Engineers’ Technology Seminar & 73rd Annual Luncheon 20/20 Vision for 2022

Neil Humphrey, COO at Waterman and chair of the Association for Consultancy and Engineering’s (ACE) procurement and pipeline group: “We welcome the update to the Government’s infrastructure and construction pipeline. Full transparency in this area is crucial to ensuring our members have the right mix of skills, expertise and experience to deliver ambitions to Build Back Better. As the delivery partner of choice for public sector clients, the pipeline’s publication also means we are poised and ready to play our part in enabling swifter delivery and meeting Project Speed’s aspirations.” “The volume and scope of the projects and programmes in the pipeline reveals some of the detail behind commitments for postpandemic recovery and, longer-term, to a Net Zero future. I’m pleased that ACE was able to support its members to deploy capabilities to best-effect by ensuring that additional project details were provided this year. This was a simple but common-sense improvement which will ensure the document is even more useful for the industry.“

Powering a New Decade Leonardo Royal Hotel Tower Bridge London, E18 GP To be held on: Thursday 28th April, 2022 IPowerE’s 2021 Technology Seminar and Luncheon will be held at the Leonardo Royal Hotel London Tower Bridge. The day will commence at 10.00am with a technology seminar, followed by a 3-course luncheon and guest speakers in the afternoon. The morning seminar will comprise a multistream programme covering a range of technologies and subject matter, so there will be something which is relevant to everyone’s business. The annual seminar and luncheon is well established as a key event in the calendar of the power and prime mover industries and is an occasion not to be missed. Book your place now and take the opportunity to catch up on the latest technology developments and to hear and engage with internationally-renowned speakers, plus the chance to network with other members, clients, colleagues and friends, old and new. Principal Guest: Dr Cathy McClay - Head of Strategy at Sembcorp Energy Guest Speaker: - Mandy Hickson, Former Royal Air Force Fast Jet (Tornado) Pilot Individual ticket price £130 (+ VAT) inclusive of admission to seminar and luncheon. Please be assured that any tickets booked for 2020 will be carried over to this new event. Individual ticket price £130 (+ VAT) inclusive of admission to seminar and luncheon Please be assured that any tickets booked for 2020 will be carried over to this new event. https://ipowere.org

HYDROGEN WELCOMED Matthew Farrow, director of policy at the Association for Consultancy and Engineering, welcomes the publication of the first hydrogen strategy by the Government. He said: “For a long time hydrogen and electrification were seen as alternatives but this Strategy rightly shows that both will be needed to deliver Net Zero.” The UK has some potential strengths in this field given its energy heritage but turning this government to flesh out policy..

www.wipmagazines.com www.powermediagroup.co.uk

CHALLENGE THE OUTSIDE

SINCRO IS INSIDE

SINCRO has been manufacturing trustable alternators for over 30 years. At the core of your best energy up to 2.6 MVA. Standard and custom. Proudly 100% Made in Europe.

WE MAKE INNOVATION

www.sogaenergyteam.com

AMPS

SEPTEMBER 2021

AMPS MEMBER COMPANY HELPS LONDON’S GREAT ORMONDE STREET HOSPITAL FOR CHILDREN - MAJOR CHP SYSTEM OVERHAUL COMPLETE

larke Energy’s service team recently completed the scheduled 60,000 hour overhaul of an INNIO Jenbacher engine installed at Great Ormond Street Hospital (GOSH), in Central London.. The Jenbacher Type4 engine, originally commissioned by Clarke Energy in 2015, was positioned on the roof the building at the famous children’s hospital. As GOSH is located in a busy part of central London, from the roof and return it to the Overhaul and Repair Centre before it could be restored to the site, reports AMPS. Great Ormond Street Hospital for Children NHS Foundation Trust runs Great Ormond Street Hospital. It is closely associated with University College London (UCL) and in partnership with the UCL Institute of Child Health. The hospital works with the UCL Institute of Child Health, and is the largest centre for research into childhood illness outside the United States and Canada, and is a major international training centre for doctors andnurses. It has the widest range of children’s specialists of any UK hospital, and is the largest centre for children’s heart or brain surgery, or for children with cancer, in the UK. Recent apy for immune diseases. In 2015 the hospital invested in a J420 gas engine to provide for its CHP needs. Based on proven design concepts of types 3 and 6, the modern Jenbacher type 4 engines in the 800 to 1,500 kW power range are characterised by a high-power density and outstanding The enhanced control and monitoring provide easy preventive maintenance, high reliability and availability. exchanger - a two stage oil plate heat exchanger on

The engine has an rlectronically controlled gas dosing

range. and channel geometry using advanced calculation and simulation methods (CFD). The end result is reduced charge-exchange losses, a central sparkplug

WORLDWIDE INDEPENDENT POWER

position resulting in optimal cooling and combustion conditions. A crack connecting rod provides high dimensional stability and accuracy, reduced connecting rod bearing wear, making it easy to maintain operations. The scheduled 60,000 hour overhaul of Great Ormonde Street’s J420 was recently completed by Clarke Energy’s service team, with the engine removed and

return of the engine. Well done team.” Since 2015, one of the oldest hospitals in the UK - St. Bart’s Hospital - has also obtained its cooling, heat and power from a single J420 unit. The 1.4 MW cogeneration unit includes a 250 kW absorption chiller which delivers cooling water to St. Bart’s.The J420 engine is regarded as the cornerstone of a new energy centre which has provided the facility

building after full servicing. A spokesman for Clarke Energy commented: “The J420 gas engine has now been rebuilt and delivered back to GOSH and is sitting proud back in place on the roof of the hospital ready for the next stage of its lifecycle. “Great credit goes to all the Clarke Energy service department involved in the planning, removal and safe

durability. The electricity generating peaking plant at Ashford Power, Kings North Industrial Estate in Kent is operating 14 containerised Jenbacher J420 engines. When not in operation, the engines of this fully-automated plant wait on standby, prepared to be called upon and ramped up in less than two minutes.

www.wipmagazines.com www.powermediagroup.co.uk

The MIRATECH ACIS-BLU™ ®

SCR Control and Dosing System Optimized for 300-1500 kW Engines

Main Features • • • • •

Intuitive User Interface • Similar to smart phone OS

Next Gen Controls

Airless Injector

High-pressure Pump

NOx Sensors

Sales: +49 6664-96119 UK: +44(0)7786 819 157

Full Sensor Suite

sales@air-sonic.com tsimpson@miratechcorp.com

MIRATECHcorp.com

CATALYTIC ENGINE SOLUTIONS • ENGINE & PROCESS SILENCERS • GAS TURBINE • FIELD SERVICE • CATALYST WASHING & TESTING

PRODUCTS & SERVICES

SEPTEMBER 2021

CUMMINS INTRODUCES NEW EC-AGS+ WIRELESS CONTROL SYSTEM FOR ONAN GENERATOR SETS

A SPOTLIGHT ON KOHLER 30RCL RESIDENTIAL/ LIGHT COMMERCIAL GENERATOR

This generator’s patent-pending innovations include a three-fan, automotive-style cooling system which keeps the sound level down. This model can give powerful operation on either natural provides 125 amps on LPG and natural gas. It has an impressive peak motor-starting capacity, with 30RCL at 44kVA at 240V. A company spokesman commented: “This genset offers reliable power for large residential or small business needs. When the power goes out during a bad storm or power failure, your 30 kW KOHLER® generator with industrial-grade engine keeps your home or business – from central air to sump pump to personal computers – up and running.” The genset offers: (LPG); the 30RCLA provides 125 amps on LPG and natural gas. - Impressive peak motor-starting capacity, with 30RCL at 44kVA at 240V

Cummins Inc. has unveiled its latest innovation - the EC-AGS+ wireless control system for Onan diesel and gas generator sets allows the user to control their generator utilisng an app on their mobile device. The wireless control enables automatic, manual or voice activation to start the generator set, receives maintenance reminders within Bluetooth range, and allows for climate monitoring. “The key feature of the EC-AGS+ is the automatic generator start function,” said Karl Wilson, North American Sales Director for Cummins. “Once enabled, the generator will start up when the batteries need to be charged and/or if the temperature gets too warm so the air conditioner needs to start.” Cummins Generator Wireless Control SystemWilson also said the ECAGS+ comes with one wireless temperature sender but can work with up to three. They can be placed anywhere in the coach to monitor different rooms. The control has a learning capability which will start the generator fully charged for the night. It is designed for easy aftermarket installation. In addition to the automatic nature of the device, the EC-AGS+ enables the user to access maintenance and exercise reminders, and full-text descriptions for generator fault codes. Alerts can be sent to the phone via Bluetooth, and a list of past events/fault codes are available for troubleshooting. www. cummins.tech/EC-AGS

harmonic distortion to protect sophisticated electronics and appliances - Powered by Kohler KG2204T industrial-grade engine with hydraulic valve lifters to eliminate need for lengthy break-in periods and expensive valve adjustments; operation speed 1800 rpm www.kohlerpower.com

ECO40 C - NEW FEATURES FOR MECC ALTE ALTERNATOR Mecc Alte has been focused on manufacturing alternators for over seven decades and is proud to promote the features of the new ECO40 C-Type. The C Type Series represents a completely new approach to design, both inside and out, which brings various advances and benefits to customers and end users. The ECO40C series has entered in pre-series phase in MASPA and is being tested by some key-customers. It is CSA 22.2 certified by means of the cULus, on the top of the UL 1004 certification. The cULus does include, as per existing rules, UL and CSA marking. The main innovations include a new PMG system, retrofittable at any time on option. The new PMG system is called PMG2C: assembly time has been vastly reduced compared to the previous PMG3 model. A Parallel device PD500 is available as optional with the drooping kit and there is a new design to the terminal box with new AVR access and with improved air cooling, easier to connect power cable from users. Also news is the design of the terminal board with reduced length and fast-link reconnection. www.meccalte.com 40

WORLDWIDE INDEPENDENT POWER

CCPILOT VS IS A 12’’ DISPLAY FEATURING A TRULY SUNLIGHT READABLE, TOUCH SCREEN WHICH INCLUDES OPTICAL BONDING Cross Control from Sweden has developed a versatile unit which is based on a powerful, quad-core ARM CPU which supports Linux and the optional LinX Software Suite. The unit provides powerful tools for application development, prebuilt modules (including CODESYS, Fieldbus access, and ISOBUS) and the ability to reuse applications across all Cross Control displays. This, together with a its 1350nit display and hardware accelerated graphics, enables fast design of premium user interfaces. CCpilot VS offers multifunctional capability and can be used as instrumentation display, HMI, video monitor, e-reader and more. crosscontrol.com

www.wipmagazines.com www.powermediagroup.co.uk

CLASSIFIED

DIRECTORY OF EQUIPMENT & SERVICES

Innovative technologies for gas treatment and exhaust systems Make it a system with APROVIS.com James Bexon

ITALIAN MANUFACTURER OF GENERATING SETS FROM 3kVA TO 2250kVA

sales@energy-gruppi.it | www.energy-gruppi.it

POWER WHEN YOU NEED LAUNCH OF IT

GF Genovate provide total power solutions for the UK & Ireland Energy markets. Diesel & Gas Generating Units. STOR/CM AND PEAKING CHP SCR SERVICE & WARRANTY IN JULY 24/7/3652021

Heating & cooling thermal management technologies

PROMOTING CRITICAL/ BACKUP POWER, ENERGY STORAGE & www.genovatepowersolutions.com COGENERATION desk@genovatepowersolutions.com

www.hotstart.com

Alternators Made in Italy

Exclusive suppliers of DEIF and Huegli Tech Control and Protection Equipment to the Power Generation Industry Tel: +44 (0)1942 932100 Email: sales@indps.co.uk Web: www.indps.co.uk

Viale del Lavoro, 30 - 37040 Arcole (VR) Italy T. +39 045 7639201 - F.+39 045 7639202 info@linzelectric.com - www.linzelectric.com

ENERGY WHERE NEEDED with INNOVATIVE SOLUTIONS COGENERATION

SHORT BREAK

STATIC GAS THERMAL

CYCLE PLUS

GEN SET POWER PLANT

STORAGE

SOLAR CYCLE

OIL & GAS

MARGEN s.p.a. Via Dino Ferrari, 50 - 41053 Maranello (MO) - Italy +39 0536 94.36.15 info@margen.it www.margen.it

Service and product provider, specialising in the power genera on industry. Sole UK & Ireland distributor for CRE Technology. Exper se in land & marine applica ons including: G59/3 Relay Tes ng Single/Mul Running Systems Paralleling Systems to the U lity AVR Replacements Contact: Mr Alistair Hickey Tel: +44 (0) 161 818 8720 Email: sales@totalgeneratorsolu ons.com www.totalgeneratorsolu ons.com

Advertise in this section for 1 year in all 27 publications for as little as £65p/m.

Leaders in complete power solutions Hire, Sales, Service & Maintenance, Contingency Planning, including 24/7 Emergency Response

www.precisioncontrols.co.uk

This includes digital & print copies. Goes out to 28,000+ high quality postal & digital subscribers.

Contact

power@wipmagazines.com

WOODL ANDSPOWER.COM UK : 0845 600 3335 | INTL : +44 138 644 2622

NOTES

ENGINE MANUFACTURERS GUIDE

R Schmitt Enertec GmbH

INNIO Jenbacher gas engines

Headquarters: A-6200 Jenbach (Austria) T +43 5244 600-0 F +43 5244 600-527 jenbacher.info@ge.com www.gejenbacher.com Manufacturer of gas driven generator sets and cogeneration systems in a power range from 0.25 to 3 MW. Model JMS 208 GS JMS 208 GS JMS 312 GS JMS 312 GS JMS 316 GS JMS 316 GS JMS 320 GS JMS 320 GS JMS 412 GS JMS 416 GS JMS 420 GS JMS 612 GS JMS 616 GS JMS 620 GS

Fuel

rpm

g g g g g g g g g g g g g g

1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,500 1,500 1,500 1,500 1,500

Pel

Pth

330 335 625 633 834 848 1,063 1,060 844 1,131 1,415 1,820 2,433 3,041

358 406 731 808 988 1,079 1,190 1,313 892 1,194 1,492 1,792 2,399 3,020

m3N. Dry exhaust gas; based on 5% O2. For engines with 1,200 rpm please contact GE Energy’s Jenbacher product team. TAD1242GE TAD1640GE TAD1641GE TAD1642GE

352 393 433 485

409 462 509 570

Perkins Engines Company Limited

Peterborough PE1 5FQ Contact name:- Simon Gray Tel: +44 (0) 1733 583000 Email: gray_simon_j@perkins.com Perkins is one of the world’s leading suppliers

56743 Mendig, Germany T +49 2652 9351810 F +49 2652 9351822 info@rschmitt-enertec.com www.rschmitt-enertec.com Manufacturer of gas driven engines,generator sets and cogeneration systems in the range from 100 - 500 kW. RSE Engines for natural gas and biogas Model

fuel

Freq.

M06-G/B T0D41 g 50 M06-G/B TID41 g 50 M06-G/B T2D41 g 50 M08-G/B TID41 g 50 M08-G/B T2D41 g 50 M12-G/B TID41 g 50 M12-G/B T2D41 g 50 M06-G/B T0D41 g 60 M06-G/B TID41 g 60 M06-G/B T2D41 g 60 M08-G/B TID41 g 60 M08-G/B T2D41 g 60 M12-G/B TID41 g 60 M12-G/B T2D41 g 60 RSE engines for LPG M06-PT0D41 g 50 M06-PTID41 g 50 M06-PT2D41 g 50 M08-PTID41 g 50 M08-PT2D41 g 50 M12-PTID41 g 50 M12-PT2D41 g 50 M06-PT0D41 g 60 M06-PTID41 g 60 M06-PT2D41 g 60 M08-PTID41 g 60 M08-PT2D41 g 60 M12-PTID41 g 60 M12-PT2D41 g 60 RSE engines for Woodgas M06-HT2D41 g 50 M08-HT2D41 g 50 M12-HT2D41 g 50 M06-HT2D41 g 60 M08-HT2D41 g 60 M12-HT2D41 g 60

Electric output 140 kW 200 kW 250 kW 260 kW 333 kW 400 kW 500 kW 150 kW 210 kW 250 kW 280 kW 333 kW 420 kW 500 kW 115 kW 173 kW 205 kW 233 kW 260 kW 350 kW 450 kW 130 kW 173 kW 205 kW 233 kW 260 kW 350kW 450 kW 122 kW 166 kW 250 kW 140 kW 180 kW 275 kW

in dieselor 1000 kWE prime in gas.

Volvo Penta

405 08 Gothenburg, Sweden Tel +46 31 235460

SCANIA ENGINES

SE-151 87 Sodertalje Sweden Tel +468553 81000 Fax +468553 898 12 E-mail engines@scania.com Web www.scania.com UK Contact – Mark Swindell Scania GB Ltd Tel +44 1908 329386 E-mail mark.swindell@scania.com Diesel & Gas engines for power generation Prime power 250kVA to 700kVA Stand by power 250kVA to 770kVA Engine range prime power 50hz & 60hz at (70% mean load factor) Scania produce diesel and gas powered engines for various Industrial and Marine applications, tionally low fuel consumption. All models are available to meet current emissions requirements, Scania engines are now available to meet both Tier 4F and EU Stage V. Alternative fuels Many of our engines can also operate on Bio-diesel conforming to EN14214 and HVO conforming to EN159540

Model Spec RPM kWm kVA TAD530GE Diesel 15002) 75 85 100 TAD531GE Diesel 15002) 88 2) TAD532GE Diesel 1500 113 130 1) 2) TAD550GE Diesel 1500 76 86 1) 2) 1500 89 101 TAD551GE Diesel 2) TAD730GE Diesel 1500 113 130 2) TAD731GE Diesel 1500 132 152 TAD732GE Diesel 15002) 162 186 2) TAD733GE Diesel 1500 175 201 2) 213 245 TAD734GE Diesel 1500 1) 2) TAD750GE Diesel 1500 114 131 TAD751GE1) Diesel 15002) 13 152 TAD752GE1) Diesel 15002) 158 182 TAD753GE1) Diesel 15002) 173 199 15002) 217 250 TAD754GE1) Diesel TAD940GE Diesel 15002) 241 277 TAD941GE Diesel 15002) 280 326 TAD1341GE Diesel 15002) 271 315 TAD1342GE Diesel 15002) 303 352 TAD1343GE Diesel 15002) 325 378 TAD1344GE Diesel 15002) 354 412 TAD1345GE Diesel 15002) 388 451 1) TAD1351GE Diesel 15002) 279 324 1) TAD1352GE Diesel 15002) 314 365 15002) 328 381 TAD1354GE1) Diesel TAD1355GE1) Diesel 15002) 355 413 TAD1640GE Diesel 15002) 392 461 TAD1641GE Diesel 15002) 430 505 TAD1642GE Diesel 15002) 503 591 TWD1643GE Diesel 15002) 536 630 TAD1650GE1) Diesel 15002) 393 462 TAD1651GE1) Diesel 15002) 430 505 Engines are also available for1800rpm/60Hz

$ $ $ $ $ $ Protect your energy supply and your business

South Africa – + 27 10 590 5531 Nigeria – + 234 (0) 8150857711 Tanzania – + 255 2222 96419 Tunisia – + 216 71 19 00 06 Algeria – + 213 21 60 90 77

Botswana – + 27 10 590 5531 Cameroon – + 237 677 285665 DRC – + 33 (0)4 4290 7575 Ghana – + 234 08150857711 Ivory Coast – + 33 (0)4 4290 7575

Reliable power supplies are essential for profitable business. Natural gas is an abundant clean-burning low-carbon fuel. Jenbacher gas engines are renowned for reliable performance. This performance is supported by our network of local service engineers. For more information on the benefits of gas-fuelled captive power plants go to clarke-energy.com or contact your local sales dept on the numbers below. + 9 – 18 months repayment of capital switching from diesel to natural gas + For electricity, heating and cooling loads + Engineer, procure and construct services available + Supported by a network of local service engineers

Kenya – + 255 2222 96419 Morocco – + 216 71 19 00 06 Rwanda – + 255 2222 96419 Mozambique – + 27 10 590 5531 www.clarke-energy.com

Manage your power from anywhere

All you need to

Get Started Alarms, dashboards, reports etc. included

Up and running within minutes No IT skills required Trouble shooting as if you are on-site 24/7/365 Industrial design for rugged applications

DATA SECURE

Find out more www.netbiter.com/contact

A vendor independent solution www.netbiter.com