Product World “Sliced” ASK couplings Miki Pulley mikipulley-us.com Stainless-steel ASK couplings have a “sliced” body structure making them an effective, low-cost, corrosionresistant solution that can accommodate many types of misalignments. The stainless-steel design makes them suitable for food and chemical applications. One-piece ASK coupling design is a preferable method for compensating for all types of system misalignment in a shaft-to-shaft connection. The sliced design handles high rotation speeds in high-temperature ranges experienced in food and chemical systems. The ASK Coupling offers exceptional torsional stiffness and strength. The coupling is available in different materials that dampen conductive heat transfer from motor to output shaft. Also important, the coupling provides limited shaft misalignment to alleviate premature system bearing wear. Basic ASK coupling specifications are: • Maximum RPM: 11,500 • Maximum allowable torque: 295 ft-lbs (400 Nm) • Bore size range: 0.118 – 2.17-in. (3.0 – 55 mm) • Backlash: Zero • Ambient operating temperature: -40 - 120 C (-40 - 248 F)
High-speed electric cylinder Moticont Moticont.com Moticont has added a high speed, high acceleration/deceleration, non-cogging, high resolution, high force-tosize Electric Cylinder to its product line of Linear Voice Coil Actuators. This new SDLM-051-095-01-01 Linear DC Actuator features high repeatability, 1.25-micron resolution, a continuous force of 33.9 N (7.6 lb), a peak force of 107.2 N (24.1 lb), and an integral thermistor to provide data to operate at peak efficiency for the highest possible thruput. This compact, patented SDLM Electric Cylinder or Linear Voice Coil Actuator is 50.8 mm (2.000-in.) in diameter, has a 25.4 mm (1.000-in.) stroke, and the housing length is 95.3 mm (3.75-in.) long. Each end of the housing has threaded mounting holes on a 25.4 mm (1.000-in.) bolt circle for universal mounting. A linear encoder, mounted internally, provides feedback for high accuracy and repeatability when operating SDLM linear actuators as DC servo motors in a closed servo loop. The non-rotating shaft has internal threaded holes for direct, zero backlash connections to the load. Additionally, the shaft is supported at both ends by long-life linear bearings and can tolerate side loads up to 24.0 N (5.4 lb). These actuators have a HOME sensor and are suitable for medical, assembly, work holding and clamping, sorting, laser machining and drilling, packaging, sampling, scanning, laser beam steering, and filtering applications. A complete Plug-and-Play servo controller is also available.
94
June 2022
Products 6-22_Vs2 MS.indd 94
www.designworldonline.com
DESIGN WORLD
6/1/22 4:30 PM
